New: U-boot fails to build with default zynq_zed_defconfig configuration
https://bugs.busybox.net/show_bug.cgi?id=9301
Bug ID: 9301
Summary: U-boot fails to build with default zynq_zed_defconfig
configuration
Product: buildroot
Version: unspecified
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P5
Component: Other
Assignee: unassigned at buildroot.uclibc.org
Reporter: matt.kraai at abbott.com
CC: buildroot at uclibc.org
Target Milestone: ---
When I run make zynq_zed_defconfig && make all on master, the build eventually fails with the following messages:
Quoted 2 lines
cp -dpf .../buildroot/output/build/uboot-xilinx-v2016.2/spl/boot.bin .../buildroot/output/images/
cp: cannot stat '.../buildroot/output/build/uboot-xilinx-v2016.2/spl/boot.bin': No such file or directory
Commit fad58cefa4a392b52eafe46a773f8cbfb8aadb43 introduced this error. Before that commit, no make targets were specified when make was invoked to build uboot. This caused make to build the all target, which caused it to build spl/boot.bin. After that commit, the u-boot.img target was specified. As a result of this change, make only built u-boot.img and not spl/boot.bin.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 9301] U-boot fails to build with default zynq_zed_defconfig configuration
https://bugs.busybox.net/show_bug.cgi?id=9301
Peter Korsgaard <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--- Comment #1 from Peter Korsgaard <[email protected]> --- Thanks for the report. We are currently discussing on the list about changing the logic to explicitly pass 'all' as the make target to fix this and similar issues:
http://lists.busybox.net/pipermail/buildroot/2016-September/172815.html
Can you verify that explicitly passing 'all' also fixes it for you? Thanks
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 9301] U-boot fails to build with default zynq_zed_defconfig configuration
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=9301
--- Comment #2 from matt.kraai at abbott.com ---
(In reply to Peter Korsgaard from comment #1)
Yes, applying the patch in that message also fixes it for me.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 9301] U-boot fails to build with default zynq_zed_defconfig configuration
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=9301
--- Comment #3 from matt.kraai at abbott.com ---
I've also verified that adding $(BR2_TARGET_UBOOT_SPL_NAME) to UBOOT_MAKE_TARGET if the former is non-empty fixes this problem.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 9301] U-boot fails to build with default zynq_zed_defconfig configuration
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=9301
matt.kraai at abbott.com changed:
What |Removed |Added
----------------------------------------------------------------------------
Resolution|--- |FIXED
Status|ASSIGNED |RESOLVED--- Comment #4 from matt.kraai at abbott.com --- This was fixed by 55a481bec1a592845c3777705865adb382ece1a3.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.