scsi/mpt2sas: setpci reset results in kernel oops
https://bugzilla.kernel.org/show_bug.cgi?id=95101
Nagarajkumar N <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected], | |nagarajkumar.narayanan@seag | |ate.com
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=95101
Joe Lawrence <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #1 from Joe Lawrence <[email protected]> ---
Quoted 1 line
From the
/var/log/messagesattachment:
Mar 16 01:13:10 RHEL63 kernel: mpt2sas1: _base_fault_reset_work: Running mpt2sas_dead_ioc thread success !!!! ... Mar 16 01:13:20 RHEL63 kernel: mpt2sas1: _scsih_ir_shutdown: timeout Mar 16 01:13:20 RHEL63 kernel: mpt2sas1: removing handle(0x0024),
wwid(0x0c4e8a1c03a9b742)
indicates that _scsih_remove was called when the driver's watchdog detected that the device was misbehaving. Driver device removal invokes:
mpt2sas_base_detach
mpt2sas_base_free_resources
iounmap(ioc->chip)
setting the stage for the crash:
Mar 16 01:13:37 RHEL63 kernel: BUG: unable to handle kernel paging request at ffffc900171e0000 Mar 16 01:13:37 RHEL63 kernel: IP: [<ffffffffa00502e0>] mpt2sas_base_get_iocstate+0x10/0x30 [mpt2sas] ... Mar 16 01:13:37 RHEL63 kernel: RAX: ffffc900171e0000 RBX: ffff88105a0aa788 RCX:
0000000000004fdc
where mpt2sas_base_get_iocstate was probably calling readl(&ioc->chip->Doorbell)
So it would seem that the mpt2sas ioctl code (step 5, I think) isn't synchronized against device removal.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
https://bugzilla.kernel.org/show_bug.cgi?id=95101
--- Comment #2 from Nagarajkumar N <[email protected]> --- Created attachment 172971
--> https://bugzilla.kernel.org/attachment.cgi?id=172971&action=edit
mpt2sas pci resource removal synchronization patch
The attached patch need to applied on latest linux main git branch on scsi/mpt2sas
The patch provides syncrhonization between cli, brm status show and pci resource removal path through mutex lock and spinlock protection on linked list of controllers (multiple warpdrive cards are used) on controller resource removal and addition
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.