Skip to contentSkip to conversation

New: kernel panic when using ebtables redirect target

Bugme-new Applied Andrew Morton 4 participants 4 messages Feb 9, 2008 – Feb 19, 2008 1 message not in the archive

Subsystems (4)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]/

#1 lore raw
Quoted 75 lines · On Fri, 8 Feb 2008 17:40:20 -0800 (PST) [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=9920

           Summary: kernel panic when using ebtables redirect target
           Product: Networking
           Version: 2.5
     KernelVersion: 2.6.24 and 2.6.24-git
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Other
        AssignedTo: [email protected]
        ReportedBy: [email protected]

Latest working kernel version: 2.6.22 ( did not test 2.6.23 ) Earliest failing kernel version: 2.6.24
Distribution:
Hardware Environment:
Software Environment: bridge working as a router
Problem Description: when using ebtables to set up target-redirect, there will be kernel panic

Steps to reproduce:
1. set up a basic bridge br0 with slaves eth0, eth1
2. on the bridge setup a default router to route traffic
3. use ebtables to setup target redirect,

ebtables -t broute -A BROUTING --logical-in br0 \

(quoted diff) +0 -2
-p ipv4  --ip-protocol tcp --ip-destination-port 80 \
-j redirect --redirect-target ACCEPT

4. from a client which is connect to the bridge,
send some traffic to allow the BROUTE chain to be
traversed :-

lynx http://www.google.com

5. Kernel panic :-

Pid: 0, comm: swapper Not tainted (2.6.24-tmc #1)
EIP: 0060:[<c69f61aa>] EFLAGS: 00000217 CPU: 0
EIP is at ebt_do_table+0x4ea/0x5d0 [ebtables]
EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
ESI: c69f1178 EDI: c69f1108 EBP: c69f1000 ESP: c0315e20
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c0314000 task=c02f1300 task.ti=c0314000)

Stack: 00000000 c69f11dc 00000004 00000000 c28c7800 c2b79c20 00000005 c69de350
      00000001 00000002 c69ed040 c69ed040 00000000 00000000 c69f1000 000000b0
      000000b0 c29b0812 00000000 c69f1122 00000000 00000000 0000a0c3 c29b0812
Call Trace:
[<c69de032>] ebt_broute+0x22/0x30 [ebtable_broute]
[<c69fef48>] br_handle_frame+0xb8/0x220 [bridge]
[<c02274ac>] netif_receive_skb+0x19c/0x440
[<c0229ffb>] process_backlog+0x6b/0xd0
[<c0229a45>] net_rx_action+0x105/0x1b0
[<c011f835>] __do_softirq+0x75/0xf0
[<c011f8e7>] do_softirq+0x37/0x40
[<c011fb25>] irq_exit+0x75/0x80
[<c010d877>] smp_apic_timer_interrupt+0x57/0x90
[<c0105b34>] apic_timer_interrupt+0x28/0x30
[<c0103cd0>] default_idle+0x0/0x40
[<c0103cff>] default_idle+0x2f/0x40
[<c0103443>] cpu_idle+0x73/0xa0
[<c0319cd5>] start_kernel+0x2c5/0x340
[<c0319420>] unknown_bootoption+0x0/0x1e0
=======================
Code: 00 00 83 f9 fe 74 64 83 f9 fc 0f 84 d7 fb ff ff 83 f9 fd 0f 84 bb fc ff

ff 8b 5c 24 30 8b 54 24 34 8d 04 5b 8d 04 82 8b 54 24 20 <89> 28 42 89 50 08 8b 5f 6c 01 df 89 78 04 8b 6c 24 38 8b 54 24
EIP: [<c69f61aa>] ebt_do_table+0x4ea/0x5d0 [ebtables] SS:ESP 0068:c0315e20

#2 lore raw
Quoted 73 lines · Andrew Morton
Quoted 71 lines · On Fri, 8 Feb 2008 17:40:20 -0800 (PST) [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=9920

           Summary: kernel panic when using ebtables redirect target
           Product: Networking
           Version: 2.5
     KernelVersion: 2.6.24 and 2.6.24-git
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Other
        AssignedTo: [email protected]
        ReportedBy: [email protected]

Latest working kernel version: 2.6.22 ( did not test 2.6.23 ) Earliest failing kernel version: 2.6.24
Distribution:
Hardware Environment:
Software Environment: bridge working as a router
Problem Description: when using ebtables to set up target-redirect, there will be kernel panic

Steps to reproduce:
1. set up a basic bridge br0 with slaves eth0, eth1
2. on the bridge setup a default router to route traffic
3. use ebtables to setup target redirect,

ebtables -t broute -A BROUTING --logical-in br0 \

(quoted diff) +0 -2
-p ipv4  --ip-protocol tcp --ip-destination-port 80 \
-j redirect --redirect-target ACCEPT

4. from a client which is connect to the bridge,
send some traffic to allow the BROUTE chain to be
traversed :-

lynx http://www.google.com

5. Kernel panic :-

Pid: 0, comm: swapper Not tainted (2.6.24-tmc #1)
EIP: 0060:[<c69f61aa>] EFLAGS: 00000217 CPU: 0
EIP is at ebt_do_table+0x4ea/0x5d0 [ebtables]
EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
ESI: c69f1178 EDI: c69f1108 EBP: c69f1000 ESP: c0315e20
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c0314000 task=c02f1300 task.ti=c0314000)

Stack: 00000000 c69f11dc 00000004 00000000 c28c7800 c2b79c20 00000005 c69de350
      00000001 00000002 c69ed040 c69ed040 00000000 00000000 c69f1000 000000b0
      000000b0 c29b0812 00000000 c69f1122 00000000 00000000 0000a0c3 c29b0812
Call Trace:
[<c69de032>] ebt_broute+0x22/0x30 [ebtable_broute]
[<c69fef48>] br_handle_frame+0xb8/0x220 [bridge]
[<c02274ac>] netif_receive_skb+0x19c/0x440
[<c0229ffb>] process_backlog+0x6b/0xd0
[<c0229a45>] net_rx_action+0x105/0x1b0
[<c011f835>] __do_softirq+0x75/0xf0
[<c011f8e7>] do_softirq+0x37/0x40
[<c011fb25>] irq_exit+0x75/0x80
[<c010d877>] smp_apic_timer_interrupt+0x57/0x90
[<c0105b34>] apic_timer_interrupt+0x28/0x30
[<c0103cd0>] default_idle+0x0/0x40
[<c0103cff>] default_idle+0x2f/0x40
[<c0103443>] cpu_idle+0x73/0xa0
[<c0319cd5>] start_kernel+0x2c5/0x340
[<c0319420>] unknown_bootoption+0x0/0x1e0
=======================
Code: 00 00 83 f9 fe 74 64 83 f9 fc 0f 84 d7 fb ff ff 83 f9 fd 0f 84 bb fc ff

ff 8b 5c 24 30 8b 54 24 34 8d 04 5b 8d 04 82 8b 54 24 20 <89> 28 42 89 50 08 8b

Quoted 8 lines
Quoted 4 lines

5f 6c 01 df 89 78 04 8b 6c 24 38 8b 54 24
EIP: [<c69f61aa>] ebt_do_table+0x4ea/0x5d0 [ebtables] SS:ESP 0068:c0315e20

--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

[PATCH] netfilter: fix incorrect use of skb_make_writable

http://bugzilla.kernel.org/show_bug.cgi?id=9920
The function skb_make_writable returns true or false.

---
 net/bridge/netfilter/ebt_dnat.c     |    2 +-
 net/bridge/netfilter/ebt_redirect.c |    2 +-
 net/bridge/netfilter/ebt_snat.c     |    2 +-
 net/ipv4/netfilter/arpt_mangle.c    |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
net/bridge/netfilter/ebt_dnat.c +1 -1
index e700cbf..1ec671d 100644
@@ -20,7 +20,7 @@ static int ebt_target_dnat(struct sk_buff *skb, unsigned int hooknr,
 {
 	const struct ebt_nat_info *info = data;
 
-	if (skb_make_writable(skb, 0))
+	if (!skb_make_writable(skb, 0))
 		return NF_DROP;
 
 	memcpy(eth_hdr(skb)->h_dest, info->mac, ETH_ALEN);
net/bridge/netfilter/ebt_redirect.c +1 -1
index bfdf2fb..bfb9f74 100644
@@ -21,7 +21,7 @@ static int ebt_target_redirect(struct sk_buff *skb, unsigned int hooknr,
 {
 	const struct ebt_redirect_info *info = data;
 
-	if (skb_make_writable(skb, 0))
+	if (!skb_make_writable(skb, 0))
 		return NF_DROP;
 
 	if (hooknr != NF_BR_BROUTING)
net/bridge/netfilter/ebt_snat.c +1 -1
index e252dab..204f996 100644
@@ -22,7 +22,7 @@ static int ebt_target_snat(struct sk_buff *skb, unsigned int hooknr,
 {
 	const struct ebt_nat_info *info = data;
 
-	if (skb_make_writable(skb, 0))
+	if (!skb_make_writable(skb, 0))
 		return NF_DROP;
 
 	memcpy(eth_hdr(skb)->h_source, info->mac, ETH_ALEN);
net/ipv4/netfilter/arpt_mangle.c +1 -1
index 45fa4e2..3f4222b 100644
@@ -19,7 +19,7 @@ target(struct sk_buff *skb,
 	unsigned char *arpptr;
 	int pln, hln;
 
-	if (skb_make_writable(skb, skb->len))
+	if (!skb_make_writable(skb, skb->len))
 		return NF_DROP;
 
 	arp = arp_hdr(skb);
Signature · 1 line
1.5.3.rc5