CD-ROM problems in at least 2.6.2-rc1-mm2 and above
The attached program for manually locking the CD-ROM tray used to work in 2.6.0 and 2.6.1, and possibly some earlier versions of 2.6.2 when called like "cd-lock /dev/hdc", where hdc is my CD-ROM drive. However, under 2.6.2-rc1-mm2 and 2.6.2-mm1, calling the program with an empty drive (which used to work) results in the following:
open failed: No medium found
Has anything changed recently which would cause open() to fail with an empty CD drive? Just for good measure, I've attached the output of strace when running this program.
//Written by Shaya Potter <[email protected]> //Placed in the Public Domain
#include <sys/ioctl.h>
#include <stdio.h>
#include <fcntl.h>
#include <linux/cdrom.h>
#include <string.h>
#include <libgen.h>
int main(int argc, char *argv[])
{
int fd;
int lock;
char *cmd1;
cmd1 = basename(argv[0]);
if (!strcmp(cmd1, "cd-lock"))
lock = 1;
else if (!strcmp(cmd1, "cd-unlock"))
lock = 0;
else {
printf("program must be called cd-lock or cd-unlock\n");
return 1;
}
if (argc != 2) {
printf("not enough options\nUsage:\n\t%s device\n", cmd1);
return 2;
}
if ((fd = open(argv[1], O_RDONLY)) <= 0) {
perror("open failed");
return 3;
}
if (ioctl(fd, CDROM_LOCKDOOR, lock)) {
perror("ioctl failed");
return 4;
}
return 0;
}execve("/home/ari/bin/cd-lock", ["cd-lock", "/dev/cdrom"], [/* 27 vars */]) = 0 uname({sys="Linux", node="ewok", ...}) = 0
brk(0) = 0x804a000old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=54887, ...}) = 0
old_mmap(NULL, 54887, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40018000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/libc.so.6", O_RDONLY) = 3read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240X\1"..., 512) = 512fstat64(3, {st_mode=S_IFREG|0644, st_size=1271388, ...}) = 0old_mmap(NULL, 1281772, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40026000old_mmap(0x40154000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x12d000) = 0x40154000old_mmap(0x4015d000, 7916, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4015d000
close(3) = 0old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4015f000
set_thread_area({entry_number:-1 -> 6, base_addr:0x4015f2a0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
munmap(0x40018000, 54887) = 0
open("/dev/cdrom", O_RDONLY) = -1 ENOMEDIUM (No medium found)
dup(2) = 3
fcntl64(3, F_GETFL) = 0x8001 (flags O_WRONLY|O_LARGEFILE)
close(3) = 0write(2, "open failed: No medium found\n", 29open failed: No medium found ) = 29exit_group(3) = ?
Quoted 9 lines · Ari Pollak
The attached program for manually locking the CD-ROM tray used to work in 2.6.0 and 2.6.1, and possibly some earlier versions of 2.6.2 when called like "cd-lock
/dev/hdc", where hdc is my CD-ROM drive. However, under 2.6.2-rc1-mm2 and 2.6.2-mm1, calling the program with an empty drive (which used to work) results in the following:open failed: No medium found
open("/dev/cdrom", O_RDONLY)= -1 ENOMEDIUM (No medium found)
Things will work better with
open("/dev/cdrom", O_RDONLY | O_NONBLOCK);