Skip to contentSkip to conversation

sound problems in 2.6.8.1 w/ EMU10K1

DISCUSSION Richard Hubbell 2 participants 2 messages Oct 12, 2004

lore
Share & tools
lore
#0 lore raw

I compiled a 2.6.8.1 kernel and something has changed so that sound works much differently.
At first I thought that it wasn't working at all, but with a bunch of fiddling around I found I could get sound. It's not clear to me if this is an ALSA problem, kernel problem or both. The first thing I discovered was that with programs like xmms I had to change the device to be hw:0,3 instead of the usual default of hw:0,0 . Let's see if I can provide some more context....

All the devices look correct in /dev/snd/*, I use no modules but
rather compile all into the kernel. Everything in /proc/asound looks as it should. (Of I never really had to look there
in previous kernels where sound was working). The EMU10K1 (SBLive) appears as card 0 and device 0 (as well as the other devices on that card). My ALSA lib versions match the kernel version.

My problems:

1. default sound isn't working, to make some apps work I created an ~/.asound file
to specifiy the default to be hw:0,3 (i.e. card0, device3 or pcmC0D3p)

2. I can no longer play mono 8000 Hz sounds, attempting to do so hard locks the machine and requires a power cycle to recover.

I can provide more context if you think it will help. Should this go to ALSA instead?

Thanks in advance,
Richard

#1 lore raw
Quoted 3 lines · Richard Hubbell

I can provide more context if you think it will help. Should this go to ALSA instead?

Try the latest ALSA version (1.0.7-rc2) before you file a bug.

Also, hw:0,3 is the SPDIF device. Sounds like you are not using normal computer speakers. Are you using digital speakers or SPDIF out to a receiver?

Please answer off-list or post your report to alsa-user as this is OT for LKML.

Lee