Scheduler on C2D CPU and latest 2.6.27 kernel
Hi
Recently I'm noticing bad behavior of the CPU scheduler on my T61 (2GB, C2D)
It looks like Linux concentrates all running tasks on one CPU and the second cpu is sleeping.
With recent changes to DRI - glxgears went up to 840FPS but also takes 100% (with Xorg) and when I run 'while :; do true; done' loop in parallel frame rate drops to 300FPS.
But as I have C2D CPU I would expect that there should be no such dramatic slowdown.
Xosview shows that only one CPU is fully loaded.
Here are my .config scheduler options:
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not setCONFIG_SCHED_HRTICK=y
# CONFIG_NET_SCHED is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SCHED_TRACER=y
Am I missing something?
Zdenek
Quoted 35 lines · Zdenek Kabelac
Hi
Recently I'm noticing bad behavior of the CPU scheduler on my T61 (2GB, C2D)
It looks like Linux concentrates all running tasks on one CPU and the second cpu is sleeping.
With recent changes to DRI - glxgears went up to 840FPS but also takes 100% (with Xorg) and when I run 'while :; do true; done' loop in parallel frame rate drops to 300FPS.
But as I have C2D CPU I would expect that there should be no such dramatic slowdown.
Xosview shows that only one CPU is fully loaded.
Here are my .config scheduler options:
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not setCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_SCHED_SMT=y
#CONFIG_SCHED_MCis not setCONFIG_SCHED_HRTICK=y
#CONFIG_NET_SCHEDis not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SCHED_TRACER=y
Quoted 1 line
Am I missing something?
You're running a loop that does nothing except create new tasks that have no scheduling history, and then disappear before the scheduler can migrate them.
Try running 'openssl speed' to chew up CPU. I promise you the scheduler will behave very nicely.
-- Chris
2008/10/21 Chris Snook <[email protected]>:
Quoted 21 lines
Quoted 20 lines · Zdenek Kabelac
Hi
Recently I'm noticing bad behavior of the CPU scheduler on my T61 (2GB, C2D)
It looks like Linux concentrates all running tasks on one CPU and the second cpu is sleeping.
With recent changes to DRI - glxgears went up to 840FPS but also takes 100% (with Xorg) and when I run 'while :; do true; done' loop in parallel frame rate drops to 300FPS.
But as I have C2D CPU I would expect that there should be no such dramatic slowdown.
Xosview shows that only one CPU is fully loaded.
Here are my .config scheduler options:
Quoted 9 lines
Quoted 9 lines
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not setCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_SCHED_SMT=y
#CONFIG_SCHED_MCis not set
I've also tested SMT=n MC=y - with same result
Quoted 8 lines
Quoted 8 lines
CONFIG_SCHED_HRTICK=y
#CONFIG_NET_SCHEDis not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SCHED_TRACER=y
Quoted 8 lines
Quoted 1 line
Am I missing something?
You're running a loop that does nothing except create new tasks that have no scheduling history, and then disappear before the scheduler can migrate them.
Try running 'openssl speed' to chew up CPU. I promise you the scheduler will behave very nicely.
Well - sorry you really shouldn't promise things you cannot guarantee.
It's obviously showing exactly same problem on my box.
And I should add that with 2.6.27-rc8 I do not experience this behavior. Gears are showning 80% speed - but consumes only 25%
and bash loop or openssl speed task do not influence its speed. (as expected with 2CPU machine)
Zdenek.
Quoted 31 lines · Zdenek Kabelac
2008/10/21 Chris Snook <[email protected]>:
Quoted 20 lines
Quoted 19 lines · Zdenek Kabelac
Hi
Recently I'm noticing bad behavior of the CPU scheduler on my T61 (2GB, C2D)
It looks like Linux concentrates all running tasks on one CPU and the second cpu is sleeping.
With recent changes to DRI - glxgears went up to 840FPS but also takes 100% (with Xorg) and when I run 'while :; do true; done' loop in parallel frame rate drops to 300FPS.
But as I have C2D CPU I would expect that there should be no such dramatic slowdown.
Xosview shows that only one CPU is fully loaded.
Here are my .config scheduler options:
Quoted 9 lines
Quoted 9 lines
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not setCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_SCHED_SMT=y
#CONFIG_SCHED_MCis not set
Quoted 1 line
I've also tested SMT=n MC=y - with same result
Expected.
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
CONFIG_SCHED_HRTICK=y
#CONFIG_NET_SCHEDis not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SCHED_TRACER=yAm I missing something?
Quoted 8 lines
Quoted 6 lines
You're running a loop that does nothing except create new tasks that have no scheduling history, and then disappear before the scheduler can migrate them.
Try running 'openssl speed' to chew up CPU. I promise you the scheduler will behave very nicely.
Well - sorry you really shouldn't promise things you cannot guarantee.
You must be new here.
Quoted 1 line
It's obviously showing exactly same problem on my box.
If you start 2 'openssl speed' tasks while glxgears is running, what happens?
Quoted 1 line
And I should add that with 2.6.27-rc8 I do not experience this behavior.
Thanks. Can you bisect?
Quoted 3 lines
Gears are showning 80% speed - but consumes only 25% and bash loop or openssl speed task do not influence its speed. (as expected with 2CPU machine)
That's definitely what it should be doing with openssl speed. The bash loop isn't something we should go out of our way to optimize for, since real world apps don't behave that way, but if there's a free fix, we might as well do it.
-- Chris
2008/10/21 Chris Snook <[email protected]>:
Quoted 54 lines
Quoted 34 lines · Zdenek Kabelac
2008/10/21 Chris Snook <[email protected]>:
Quoted 22 lines
Quoted 20 lines · Zdenek Kabelac
Hi
Recently I'm noticing bad behavior of the CPU scheduler on my T61 (2GB, C2D)
It looks like Linux concentrates all running tasks on one CPU and the second cpu is sleeping.
With recent changes to DRI - glxgears went up to 840FPS but also takes 100% (with Xorg) and when I run 'while :; do true; done' loop in parallel frame rate drops to 300FPS.
But as I have C2D CPU I would expect that there should be no such dramatic slowdown.
Xosview shows that only one CPU is fully loaded.
Here are my .config scheduler options:
Quoted 9 lines
Quoted 9 lines
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not setCONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_SCHED_SMT=y
#CONFIG_SCHED_MCis not setQuoted 1 line
I've also tested SMT=n MC=y - with same result
Expected.
Quoted 15 lines
Quoted 15 lines
Quoted 9 lines
CONFIG_SCHED_HRTICK=y
#CONFIG_NET_SCHEDis not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SCHED_TRACER=yAm I missing something?
You're running a loop that does nothing except create new tasks that have no
scheduling history, and then disappear before the scheduler can migrate them.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Try running 'openssl speed' to chew up CPU. I promise you the scheduler will behave very nicely.
Well - sorry you really shouldn't promise things you cannot guarantee.
You must be new here.
hmm, I don't think so :)
Quoted 9 lines
Quoted 2 lines
It's obviously showing exactly same problem on my box.
If you start 2 'openssl speed' tasks while glxgears is running, what happens?
Quoted 1 line
And I should add that with 2.6.27-rc8 I do not experience this behavior.
Thanks. Can you bisect?
Maybe the author of this regression will 'confess' himself and will safe my time?
I can see some major merge on Oct 20 for kernel/sched.c
Quoted 9 lines
Quoted 4 lines
Gears are showning 80% speed - but consumes only 25% and bash loop or openssl speed task do not influence its speed. (as expected with 2CPU machine)
That's definitely what it should be doing with openssl speed. The bash loop isn't something we should go out of our way to optimize for, since real world apps don't behave that way, but if there's a free fix, we might as well do it.
You really should check first what the loop I've posted actually does :) (hint - /bin/true != true)
Zdenek