Skip to contentSkip to conversation

MCE error log

DISCUSSION Zdenek Kabelac 4 participants 5 messages Jan 6, 2009 – Jan 25, 2009

lore
Share & tools
lore
#0 lore raw

Hi

I've noticed mcelog with weird content:

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 1 BANK 128 TSC 57976afd
STATUS 88380100 MCGSTATUS 0
MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 1 BANK 128 TSC 53e61034
STATUS 88370100 MCGSTATUS 0

I'm running T61 - 2GB - in this directory /sys/devices/system/machinecheck/machinecheck1
I could only see bank0ctl ... bank5ctl - so where is bank 128 ? (as there are no time stamps, I could hardly guess how often this happens)

Is it kernel bug or chipset bug ?
Should I start to worry about the stability of my machine ?

Zdenek

#1 lore raw
Quoted 3 lines · Zdenek Kabelac

CPU 1 BANK 128 TSC 57976afd

I could only see bank0ctl ... bank5ctl - so where is bank 128 ?

I've had bank 128 reported before. Turned out it was for thermal events caused by dust bunnies clogging a cooling vent. I never did find an official statement that's what 128 is for, but I did find a bunch of hints....

What does lm_sensors say the CPU temp is sitting at?

#2 lore raw
Quoted 11 lines · On Tue, Jan 6, 2009 at 7:42 PM, <[email protected]> wrote:
Quoted 3 lines · Zdenek Kabelac

CPU 1 BANK 128 TSC 57976afd

I could only see bank0ctl ... bank5ctl - so where is bank 128 ?

I've had bank 128 reported before. Turned out it was for thermal events caused by dust bunnies clogging a cooling vent. I never did find an official statement that's what 128 is for, but I did find a bunch of hints....

What does lm_sensors say the CPU temp is sitting at?

I get this also:

MCE 0
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
CPU 1 THERMAL EVENT TSC dc963a087
Processor core below trip temperature. Throttling disabled STATUS 882c0100 MCGSTATUS 0
MCE 1
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
CPU 0 THERMAL EVENT TSC dc970c0d0
Processor core below trip temperature. Throttling disabled STATUS 882d0200 MCGSTATUS 0

and in kernel log:

Machine check events logged
CPU0: Temperature/speed normal
CPU1: Temperature/speed normal

This is happening since I installed a x86_64 kernel instead of 32-bit. Maybe this explains those weird (never fatal) APIC errors I always used to get before (error 40, invalid vector received AFAIR)? In any case, the APIC errors are not to be seen now, and the frequency of the MCEs are about that of the APIC errors. What I can say is that it seems they appear sooner when there is a lot of interrupts, e.g. disk or network activity. What is the correlation?

Temperature seems completely normal whenever it happens:

# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +58.0°C  (high = +100.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +59.0°C (high = +100.0°C, crit = +100.0°C)

Anyway, system works fine, so it's not much to worry about. But I am curious...

Vegard

Signature · 4 lines
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
	-- E. W. Dijkstra, EWD1036
#4 lore raw

2009/1/6 Andi Kleen <[email protected]>:

Quoted 6 lines
Quoted 2 lines · Zdenek Kabelac

/sys/devices/system/machinecheck/machinecheck1
I could only see bank0ctl ... bank5ctl - so where is bank 128 ?

Update your mcelog. Newer versions decode it.

Ok

I've replaced binary with the latest code from you.

Here is new trace

MCE 0
HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor
CPU 1 THERMAL EVENT TSC 54ab7bf6
Processor core below trip temperature. Throttling disabled STATUS 88380100 MCGSTATUS 0

So what does this message means now ?

Zdenek