Skip to contentSkip to conversation

lpfc on latest 5.9 is very chatty on modprobe

DISCUSSION Laurence Oberman 1 participant 4 messages Sep 10, 2020 – Sep 11, 2020 1 message not in the archive SCSI

lore
Share & tools
lore
#0 lore raw

Hello

I was testing lpfc on 5.9 and noticed a lot more logging on modprobe. Even when lpfc_log_verbose = 0

root@segstorage3 ~]# cat /sys/class/scsi_host/host*/lpfc_log_verbose 0x0
0x0
0x0
0x0

Wondered if its been there for a while and its just because I now started testing.

[  143.398194] scsi host3: Emulex LPe12000 PCIe Fibre Channel Adapter
on PCI bus 0e device 00 irq 213
[  145.598711] scsi host4: Emulex LPe12000 PCIe Fibre Channel Adapter
on PCI bus 0e device 01 irq 216
[  147.877559] lpfc 0000:0b:00.0: 2:6101 Disabling NVME support: Not
supported by firmware (0 0) x3
[  147.929264] lpfc 0000:0b:00.0: 2:2574 IO channels: hdwQ 64 IRQ 64
MRQ: 0
[  147.974727] scsi host5: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 00 irq 219 PCI resettable
[  149.156406] lpfc 0000:0b:00.0: 2:3176 Port Name 0 Physical Link is
functional
[  149.284537] lpfc 0000:0b:00.1: 3:6101 Disabling NVME support: Not
supported by firmware (0 0) x3
[  149.336809] lpfc 0000:0b:00.1: 3:2574 IO channels: hdwQ 64 IRQ 64
MRQ: 0
[  149.388033] scsi host6: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 01 irq 284 PCI resettable
[  150.848392] lpfc 0000:0b:00.1: 3:3176 Port Name 1 Physical Link is
functional
[  151.477690] lpfc 0000:0b:00.0: 2:1303 Link Up Event x1 received
Data: x1 x0 x20 x0 x0 x0 0
[  151.526732] lpfc 0000:0b:00.0: start 183 end 182 cnt 256
[  151.559193] lpfc 0000:0b:00.0: 183: [  148.759023] 2:2593 WQ setup:
wq[35]-id=35 assoc=35, cq[35]-id=35
[  151.617510] lpfc 0000:0b:00.0: 184: [  148.763089] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x24 xb8000000 x24 x1000 CQ: x0 x0 x0 x90000000
[  151.715751] lpfc 0000:0b:00.0: 185: [  148.763090] 2:6087 CQ setup:
cq[36]-id=36, parent eq[36]-id=36
[  151.772034] lpfc 0000:0b:00.0: 186: [  148.767155] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x240024 x4008504 x0 xcf400000 CQ: x0 x0 x0 x90000000
[  151.872722] lpfc 0000:0b:00.0: 187: [  148.767156] 2:2593 WQ setup:
wq[36]-id=36 assoc=36, cq[36]-id=36
[  151.929396] lpfc 0000:0b:00.0: 188: [  148.771220] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x25 xb8000000 x25 x1000 CQ: x0 x0 x0 x90000000
[  152.030050] lpfc 0000:0b:00.0: 189: [  148.771221] 2:6087 CQ setup:
cq[37]-id=37, parent eq[37]-id=37
[  152.085622] lpfc 0000:0b:00.0: 190: [  148.775285] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x250025 x4008504 x0 xbc7e0000 CQ: x0 x0 x0 x90000000
[  152.185681] lpfc 0000:0b:00.0: 191: [  148.775287] 2:2593 WQ setup:
wq[37]-id=37 assoc=37, cq[37]-id=37
[  152.243645] lpfc 0000:0b:00.0: 192: [  148.779351] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x26 xb8000000 x26 x1000 CQ: x0 x0 x0 x90000000
[  152.341442] lpfc 0000:0b:00.0: 193: [  148.779352] 2:6087 CQ setup:
cq[38]-id=38, parent eq[38]-id=38
[  152.399734] lpfc 0000:0b:00.0: 194: [  148.783416] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x260026 x4008504 x0 x5ef40000 CQ: x0 x0 x0 x90000000
[  152.501390] lpfc 0000:0b:00.0: 195: [  148.783417] 2:2593 WQ setup:
wq[38]-id=38 assoc=38, cq[38]-id=38
[  152.557531] lpfc 0000:0b:00.0: 196: [  148.787481] 2:(0):0356

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4 x27 xb8000000 x27 x1000 CQ: x0 x0 x0 x90000000
..
..

[  190.872503] lpfc 0000:0b:00.0: start 109 end 115 cnt 6
[  190.872506] lpfc 0000:0b:00.0: 109: [  190.871058] 2:(0):0117 Xmit
ELS response x1 to remote NPORT x20300 I/O tag: xb92, size: x8
port_state x20  rpi x10 fc_flag x800110
[  190.872507] lpfc 0000:0b:00.0: 110: [  190.871060] 2:(0):0129 Xmit
ELS RJT xb00 response tag xb92 xri xffff, did x20300, nlp_flag
x80000000, nlp_state x7, rpi x10
[  190.872509] lpfc 0000:0b:00.0: 111: [  190.871085] 2:(0):0110 ELS
response tag xb92 completes Data: x0 x0 x0 x20300 x80000000 x7 x10
[  190.872511] lpfc 0000:0b:00.0: 112: [  190.872497] 2:2538 Received
frame rctl:x22, type:x1, frame Data:220a0300 00010600 01290000 00000000
0048ffff 00000000 00000000
[  190.872512] lpfc 0000:0b:00.0: 113: [  190.872500] 2:(0):0929 FIND
node DID Data: xffff896e4faf2c00 x10600 x80000000 x7001801 xc
xffff896e4faf1200
[  190.872514] lpfc 0000:0b:00.0: 114: [  190.872501] 2:(0):0112 ELS
command x14001023 received from NPORT x10600 Data: x20 x800110 xa0300
xa0300
[  190.872515] lpfc 0000:0b:00.0: 2:(0):0115 Unknown ELS command
x14001023 received from NPORT x10600
[  190.873239] lpfc 0000:0b:00.0: start 115 end 121 cnt 6
[  190.873241] lpfc 0000:0b:00.0: 115: [  190.872517] 2:(0):0117 Xmit
ELS response x1 to remote NPORT x10600 I/O tag: xb8f, size: x8
port_state x20  rpi xc fc_flag x800110
[  190.873243] lpfc 0000:0b:00.0: 116: [  190.872519] 2:(0):0129 Xmit
ELS RJT xb00 response tag xb8f xri xffff, did x10600, nlp_flag
x80000000, nlp_state x7, rpi xc
[  190.873244] lpfc 0000:0b:00.0: 117: [  190.872545] 2:(0):0110 ELS
response tag xb8f completes Data: x0 x0 x0 x10600 x80000000 x7 xc
[  190.873246] lpfc 0000:0b:00.0: 118: [  190.873234] 2:2538 Received
frame rctl:x22, type:x1, frame Data:220a0300 00010700 01290000 00000000
008cffff 00000000 00000000
[  190.873249] lpfc 0000:0b:00.0: 119: [  190.873236] 2:(0):0929 FIND

node DID Data: xffff896e4faf0600 x10700 x80000000 x7001801 xd xffff896e4faf3600

I have not investogated the masking changes yet, decided to first ask.

Thanks
Laurence

#1 lore raw
Quoted 116 lines · Laurence Oberman

Hello

I was testing lpfc on 5.9 and noticed a lot more logging on modprobe. Even when lpfc_log_verbose = 0

root@segstorage3 ~]# cat /sys/class/scsi_host/host*/lpfc_log_verbose 0x0
0x0
0x0
0x0

Wondered if its been there for a while and its just because I now started testing.

[  143.398194] scsi host3: Emulex LPe12000 PCIe Fibre Channel Adapter
on PCI bus 0e device 00 irq 213
[  145.598711] scsi host4: Emulex LPe12000 PCIe Fibre Channel Adapter
on PCI bus 0e device 01 irq 216
[  147.877559] lpfc 0000:0b:00.0: 2:6101 Disabling NVME support: Not
supported by firmware (0 0) x3
[  147.929264] lpfc 0000:0b:00.0: 2:2574 IO channels: hdwQ 64 IRQ 64
MRQ: 0
[  147.974727] scsi host5: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 00 irq 219 PCI resettable
[  149.156406] lpfc 0000:0b:00.0: 2:3176 Port Name 0 Physical Link is
functional
[  149.284537] lpfc 0000:0b:00.1: 3:6101 Disabling NVME support: Not
supported by firmware (0 0) x3
[  149.336809] lpfc 0000:0b:00.1: 3:2574 IO channels: hdwQ 64 IRQ 64
MRQ: 0
[  149.388033] scsi host6: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 01 irq 284 PCI resettable
[  150.848392] lpfc 0000:0b:00.1: 3:3176 Port Name 1 Physical Link is
functional
[  151.477690] lpfc 0000:0b:00.0: 2:1303 Link Up Event x1 received
Data: x1 x0 x20 x0 x0 x0 0
[  151.526732] lpfc 0000:0b:00.0: start 183 end 182 cnt 256
[  151.559193] lpfc 0000:0b:00.0: 183: [  148.759023] 2:2593 WQ
setup:
wq[35]-id=35 assoc=35, cq[35]-id=35
[  151.617510] lpfc 0000:0b:00.0: 184: [  148.763089] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x24 xb8000000 x24 x1000 CQ: x0 x0 x0 x90000000
[  151.715751] lpfc 0000:0b:00.0: 185: [  148.763090] 2:6087 CQ
setup:
cq[36]-id=36, parent eq[36]-id=36
[  151.772034] lpfc 0000:0b:00.0: 186: [  148.767155] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x240024 x4008504 x0 xcf400000 CQ: x0 x0 x0 x90000000
[  151.872722] lpfc 0000:0b:00.0: 187: [  148.767156] 2:2593 WQ
setup:
wq[36]-id=36 assoc=36, cq[36]-id=36
[  151.929396] lpfc 0000:0b:00.0: 188: [  148.771220] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x25 xb8000000 x25 x1000 CQ: x0 x0 x0 x90000000
[  152.030050] lpfc 0000:0b:00.0: 189: [  148.771221] 2:6087 CQ
setup:
cq[37]-id=37, parent eq[37]-id=37
[  152.085622] lpfc 0000:0b:00.0: 190: [  148.775285] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x250025 x4008504 x0 xbc7e0000 CQ: x0 x0 x0 x90000000
[  152.185681] lpfc 0000:0b:00.0: 191: [  148.775287] 2:2593 WQ
setup:
wq[37]-id=37 assoc=37, cq[37]-id=37
[  152.243645] lpfc 0000:0b:00.0: 192: [  148.779351] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x26 xb8000000 x26 x1000 CQ: x0 x0 x0 x90000000
[  152.341442] lpfc 0000:0b:00.0: 193: [  148.779352] 2:6087 CQ
setup:
cq[38]-id=38, parent eq[38]-id=38
[  152.399734] lpfc 0000:0b:00.0: 194: [  148.783416] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4 x4
x260026 x4008504 x0 x5ef40000 CQ: x0 x0 x0 x90000000
[  152.501390] lpfc 0000:0b:00.0: 195: [  148.783417] 2:2593 WQ
setup:
wq[38]-id=38 assoc=38, cq[38]-id=38
[  152.557531] lpfc 0000:0b:00.0: 196: [  148.787481] 2:(0):0356

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4 x27 xb8000000 x27 x1000 CQ: x0 x0 x0 x90000000
..
..

[  190.872503] lpfc 0000:0b:00.0: start 109 end 115 cnt 6
[  190.872506] lpfc 0000:0b:00.0: 109: [  190.871058] 2:(0):0117 Xmit
ELS response x1 to remote NPORT x20300 I/O tag: xb92, size: x8
port_state x20  rpi x10 fc_flag x800110
[  190.872507] lpfc 0000:0b:00.0: 110: [  190.871060] 2:(0):0129 Xmit
ELS RJT xb00 response tag xb92 xri xffff, did x20300, nlp_flag
x80000000, nlp_state x7, rpi x10
[  190.872509] lpfc 0000:0b:00.0: 111: [  190.871085] 2:(0):0110 ELS
response tag xb92 completes Data: x0 x0 x0 x20300 x80000000 x7 x10
[  190.872511] lpfc 0000:0b:00.0: 112: [  190.872497] 2:2538 Received
frame rctl:x22, type:x1, frame Data:220a0300 00010600 01290000
00000000
0048ffff 00000000 00000000
[  190.872512] lpfc 0000:0b:00.0: 113: [  190.872500] 2:(0):0929 FIND
node DID Data: xffff896e4faf2c00 x10600 x80000000 x7001801 xc
xffff896e4faf1200
[  190.872514] lpfc 0000:0b:00.0: 114: [  190.872501] 2:(0):0112 ELS
command x14001023 received from NPORT x10600 Data: x20 x800110 xa0300
xa0300
[  190.872515] lpfc 0000:0b:00.0: 2:(0):0115 Unknown ELS command
x14001023 received from NPORT x10600
[  190.873239] lpfc 0000:0b:00.0: start 115 end 121 cnt 6
[  190.873241] lpfc 0000:0b:00.0: 115: [  190.872517] 2:(0):0117 Xmit
ELS response x1 to remote NPORT x10600 I/O tag: xb8f, size: x8
port_state x20  rpi xc fc_flag x800110
[  190.873243] lpfc 0000:0b:00.0: 116: [  190.872519] 2:(0):0129 Xmit
ELS RJT xb00 response tag xb8f xri xffff, did x10600, nlp_flag
x80000000, nlp_state x7, rpi xc
[  190.873244] lpfc 0000:0b:00.0: 117: [  190.872545] 2:(0):0110 ELS
response tag xb8f completes Data: x0 x0 x0 x10600 x80000000 x7 xc
[  190.873246] lpfc 0000:0b:00.0: 118: [  190.873234] 2:2538 Received
frame rctl:x22, type:x1, frame Data:220a0300 00010700 01290000
00000000
008cffff 00000000 00000000
[  190.873249] lpfc 0000:0b:00.0: 119: [  190.873236] 2:(0):0929 FIND
Quoted 8 lines

node DID Data: xffff896e4faf0600 x10700 x80000000 x7001801 xd xffff896e4faf3600

I have not investogated the masking changes yet, decided to first ask.

Thanks
Laurence

Hi Dick I dont see this when booting 5.5, which was when I last tested, and before I start the long arduous code review and maybe bisect I would rather have you look at it.
Can you look at this please and let me know.
Its not happeniong on latest RHEL8 but could happen if we take latest code in.

Regards
Laurence

#2 lore raw
Quoted 163 lines · Laurence Oberman
Quoted 148 lines · Laurence Oberman

Hello

I was testing lpfc on 5.9 and noticed a lot more logging on modprobe.
Even when lpfc_log_verbose = 0

root@segstorage3 ~]# cat
/sys/class/scsi_host/host*/lpfc_log_verbose
0x0
0x0
0x0
0x0

Wondered if its been there for a while and its just because I now started testing.

[  143.398194] scsi host3: Emulex LPe12000 PCIe Fibre Channel
Adapter
on PCI bus 0e device 00 irq 213
[  145.598711] scsi host4: Emulex LPe12000 PCIe Fibre Channel
Adapter
on PCI bus 0e device 01 irq 216
[  147.877559] lpfc 0000:0b:00.0: 2:6101 Disabling NVME support:
Not
supported by firmware (0 0) x3
[  147.929264] lpfc 0000:0b:00.0: 2:2574 IO channels: hdwQ 64 IRQ
64
MRQ: 0
[  147.974727] scsi host5: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 00 irq 219 PCI resettable
[  149.156406] lpfc 0000:0b:00.0: 2:3176 Port Name 0 Physical Link
is
functional
[  149.284537] lpfc 0000:0b:00.1: 3:6101 Disabling NVME support:
Not
supported by firmware (0 0) x3
[  149.336809] lpfc 0000:0b:00.1: 3:2574 IO channels: hdwQ 64 IRQ
64
MRQ: 0
[  149.388033] scsi host6: Emulex LPe16000 16Gb PCIe Fibre Channel
Adapter on PCI bus 0b device 01 irq 284 PCI resettable
[  150.848392] lpfc 0000:0b:00.1: 3:3176 Port Name 1 Physical Link
is
functional
[  151.477690] lpfc 0000:0b:00.0: 2:1303 Link Up Event x1 received
Data: x1 x0 x20 x0 x0 x0 0
[  151.526732] lpfc 0000:0b:00.0: start 183 end 182 cnt 256
[  151.559193] lpfc 0000:0b:00.0: 183: [  148.759023] 2:2593 WQ
setup:
wq[35]-id=35 assoc=35, cq[35]-id=35
[  151.617510] lpfc 0000:0b:00.0: 184: [  148.763089] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4
x4
x24 xb8000000 x24 x1000 CQ: x0 x0 x0 x90000000
[  151.715751] lpfc 0000:0b:00.0: 185: [  148.763090] 2:6087 CQ
setup:
cq[36]-id=36, parent eq[36]-id=36
[  151.772034] lpfc 0000:0b:00.0: 186: [  148.767155] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4
x4
x240024 x4008504 x0 xcf400000 CQ: x0 x0 x0 x90000000
[  151.872722] lpfc 0000:0b:00.0: 187: [  148.767156] 2:2593 WQ
setup:
wq[36]-id=36 assoc=36, cq[36]-id=36
[  151.929396] lpfc 0000:0b:00.0: 188: [  148.771220] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4
x4
x25 xb8000000 x25 x1000 CQ: x0 x0 x0 x90000000
[  152.030050] lpfc 0000:0b:00.0: 189: [  148.771221] 2:6087 CQ
setup:
cq[37]-id=37, parent eq[37]-id=37
[  152.085622] lpfc 0000:0b:00.0: 190: [  148.775285] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4
x4
x250025 x4008504 x0 xbc7e0000 CQ: x0 x0 x0 x90000000
[  152.185681] lpfc 0000:0b:00.0: 191: [  148.775287] 2:2593 WQ
setup:
wq[37]-id=37 assoc=37, cq[37]-id=37
[  152.243645] lpfc 0000:0b:00.0: 192: [  148.779351] 2:(0):0356
Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4
x4
x26 xb8000000 x26 x1000 CQ: x0 x0 x0 x90000000
[  152.341442] lpfc 0000:0b:00.0: 193: [  148.779352] 2:6087 CQ
setup:
cq[38]-id=38, parent eq[38]-id=38
[  152.399734] lpfc 0000:0b:00.0: 194: [  148.783416] 2:(0):0356
Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0 x4
x4
x260026 x4008504 x0 x5ef40000 CQ: x0 x0 x0 x90000000
[  152.501390] lpfc 0000:0b:00.0: 195: [  148.783417] 2:2593 WQ
setup:
wq[38]-id=38 assoc=38, cq[38]-id=38
[  152.557531] lpfc 0000:0b:00.0: 196: [  148.787481] 2:(0):0356

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0 x4 x4
x27 xb8000000 x27 x1000 CQ: x0 x0 x0 x90000000
..
..

[  190.872503] lpfc 0000:0b:00.0: start 109 end 115 cnt 6
[  190.872506] lpfc 0000:0b:00.0: 109: [  190.871058] 2:(0):0117
Xmit
ELS response x1 to remote NPORT x20300 I/O tag: xb92, size: x8
port_state x20  rpi x10 fc_flag x800110
[  190.872507] lpfc 0000:0b:00.0: 110: [  190.871060] 2:(0):0129
Xmit
ELS RJT xb00 response tag xb92 xri xffff, did x20300, nlp_flag
x80000000, nlp_state x7, rpi x10
[  190.872509] lpfc 0000:0b:00.0: 111: [  190.871085] 2:(0):0110
ELS
response tag xb92 completes Data: x0 x0 x0 x20300 x80000000 x7 x10
[  190.872511] lpfc 0000:0b:00.0: 112: [  190.872497] 2:2538

Received
frame rctl:x22, type:x1, frame Data:220a0300 00010600 01290000 00000000
0048ffff 00000000 00000000

[  190.872512] lpfc 0000:0b:00.0: 113: [  190.872500] 2:(0):0929
FIND
node DID Data: xffff896e4faf2c00 x10600 x80000000 x7001801 xc
xffff896e4faf1200
[  190.872514] lpfc 0000:0b:00.0: 114: [  190.872501] 2:(0):0112

ELS
command x14001023 received from NPORT x10600 Data: x20 x800110 xa0300
xa0300

[  190.872515] lpfc 0000:0b:00.0: 2:(0):0115 Unknown ELS command
x14001023 received from NPORT x10600
[  190.873239] lpfc 0000:0b:00.0: start 115 end 121 cnt 6
[  190.873241] lpfc 0000:0b:00.0: 115: [  190.872517] 2:(0):0117
Xmit
ELS response x1 to remote NPORT x10600 I/O tag: xb8f, size: x8
port_state x20  rpi xc fc_flag x800110
[  190.873243] lpfc 0000:0b:00.0: 116: [  190.872519] 2:(0):0129
Xmit
ELS RJT xb00 response tag xb8f xri xffff, did x10600, nlp_flag
x80000000, nlp_state x7, rpi xc
[  190.873244] lpfc 0000:0b:00.0: 117: [  190.872545] 2:(0):0110
ELS
response tag xb8f completes Data: x0 x0 x0 x10600 x80000000 x7 xc
[  190.873246] lpfc 0000:0b:00.0: 118: [  190.873234] 2:2538

Received
frame rctl:x22, type:x1, frame Data:220a0300 00010700 01290000 00000000
008cffff 00000000 00000000

[  190.873249] lpfc 0000:0b:00.0: 119: [  190.873236] 2:(0):0929

FIND
node DID Data: xffff896e4faf0600 x10700 x80000000 x7001801 xd xffff896e4faf3600

Quoted 5 lines

I have not investogated the masking changes yet, decided to first ask.

Thanks
Laurence

Hi Dick I dont see this when booting 5.5, which was when I last tested,
and before I start the long arduous code review and maybe bisect I would rather have you look at it.
Can you look at this please and let me know.
Its not happeniong on latest RHEL8 but could happen if we take latest code in.

Quoted 3 lines

Regards
Laurence

Dick
Seems to be all these changes like below. all chamhed to LOG_TRACE_EVENT

- lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT |
LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_ERR,
LOG_TRACE_EVENT,

A message that is not in the archive (sent off-list or not yet received): CAGx+d6dhGuJdUfisgvVfaTJ5aT7D9hP+WQcaD485iF=tuKqv7w@mail.gmail.com

#4 lore raw
Quoted 8 lines · Dick Kennedy

Yes we have been removing some of those trace events to eliminate the false logs.

All of the successful scsi task management commands will generate false logs. We have a patch for that coming.
All of the successful vport deletes will also generate the false logs.

Quoted 223 lines

But other than that I can say that having it in there has made my life a little easier.

Quoted 217 lines · Laurence Oberman
Quoted 7 lines · Laurence Oberman
Quoted 6 lines · Laurence Oberman

Hello

I was testing lpfc on 5.9 and noticed a lot more logging on modprobe.
Even when lpfc_log_verbose = 0

Quoted 8 lines
Quoted 8 lines

root@segstorage3 ~]# cat
/sys/class/scsi_host/host*/lpfc_log_verbose
0x0
0x0
0x0
0x0

Wondered if its been there for a while and its just because I

now

Quoted 9 lines
Quoted 9 lines

started testing.

[  143.398194] scsi host3: Emulex LPe12000 PCIe Fibre Channel
Adapter
on PCI bus 0e device 00 irq 213
[  145.598711] scsi host4: Emulex LPe12000 PCIe Fibre Channel
Adapter
on PCI bus 0e device 01 irq 216
[  147.877559] lpfc 0000:0b:00.0: 2:6101 Disabling NVME

support:

Quoted 3 lines
Quoted 3 lines

Not
supported by firmware (0 0) x3

[  147.929264] lpfc 0000:0b:00.0: 2:2574 IO channels: hdwQ 64

IRQ

Quoted 3 lines
Quoted 3 lines

64
MRQ: 0

[  147.974727] scsi host5: Emulex LPe16000 16Gb PCIe Fibre

Channel

Quoted 2 lines
Quoted 2 lines

Adapter on PCI bus 0b device 00 irq 219 PCI resettable

[  149.156406] lpfc 0000:0b:00.0: 2:3176 Port Name 0 Physical

Link

Quoted 3 lines
Quoted 3 lines

is
functional

[  149.284537] lpfc 0000:0b:00.1: 3:6101 Disabling NVME

support:

Quoted 3 lines
Quoted 3 lines

Not
supported by firmware (0 0) x3

[  149.336809] lpfc 0000:0b:00.1: 3:2574 IO channels: hdwQ 64

IRQ

Quoted 3 lines
Quoted 3 lines

64
MRQ: 0

[  149.388033] scsi host6: Emulex LPe16000 16Gb PCIe Fibre

Channel

Quoted 2 lines
Quoted 2 lines

Adapter on PCI bus 0b device 01 irq 284 PCI resettable

[  150.848392] lpfc 0000:0b:00.1: 3:3176 Port Name 1 Physical

Link

Quoted 3 lines
Quoted 3 lines

is
functional

[  151.477690] lpfc 0000:0b:00.0: 2:1303 Link Up Event x1

received

Quoted 6 lines
Quoted 6 lines

Data: x1 x0 x20 x0 x0 x0 0

[  151.526732] lpfc 0000:0b:00.0: start 183 end 182 cnt 256
[  151.559193] lpfc 0000:0b:00.0: 183: [  148.759023] 2:2593 WQ
setup:
wq[35]-id=35 assoc=35, cq[35]-id=35
[  151.617510] lpfc 0000:0b:00.0: 184: [  148.763089]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x24 xb8000000 x24 x1000 CQ: x0 x0 x0 x90000000

[  151.715751] lpfc 0000:0b:00.0: 185: [  148.763090] 2:6087 CQ
setup:
cq[36]-id=36, parent eq[36]-id=36
[  151.772034] lpfc 0000:0b:00.0: 186: [  148.767155]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x240024 x4008504 x0 xcf400000 CQ: x0 x0 x0 x90000000

[  151.872722] lpfc 0000:0b:00.0: 187: [  148.767156] 2:2593 WQ
setup:
wq[36]-id=36 assoc=36, cq[36]-id=36
[  151.929396] lpfc 0000:0b:00.0: 188: [  148.771220]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x25 xb8000000 x25 x1000 CQ: x0 x0 x0 x90000000

[  152.030050] lpfc 0000:0b:00.0: 189: [  148.771221] 2:6087 CQ
setup:
cq[37]-id=37, parent eq[37]-id=37
[  152.085622] lpfc 0000:0b:00.0: 190: [  148.775285]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x250025 x4008504 x0 xbc7e0000 CQ: x0 x0 x0 x90000000

[  152.185681] lpfc 0000:0b:00.0: 191: [  148.775287] 2:2593 WQ
setup:
wq[37]-id=37 assoc=37, cq[37]-id=37
[  152.243645] lpfc 0000:0b:00.0: 192: [  148.779351]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x26 xb8000000 x26 x1000 CQ: x0 x0 x0 x90000000

[  152.341442] lpfc 0000:0b:00.0: 193: [  148.779352] 2:6087 CQ
setup:
cq[38]-id=38, parent eq[38]-id=38
[  152.399734] lpfc 0000:0b:00.0: 194: [  148.783416]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (xc/x1) Status x0 Data: x1 x54 x0 x0 x0 xc01 x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x260026 x4008504 x0 x5ef40000 CQ: x0 x0 x0 x90000000

[  152.501390] lpfc 0000:0b:00.0: 195: [  148.783417] 2:2593 WQ
setup:
wq[38]-id=38 assoc=38, cq[38]-id=38
[  152.557531] lpfc 0000:0b:00.0: 196: [  148.787481]

2:(0):0356

Quoted 1 line
Quoted 1 line

Mailbox cmd x9b (x1/xc) Status x0 Data: x1 x44 x0 x0 x0 x10c x0

x4

Quoted 6 lines
Quoted 6 lines

x4
x27 xb8000000 x27 x1000 CQ: x0 x0 x0 x90000000
..
..

[  190.872503] lpfc 0000:0b:00.0: start 109 end 115 cnt 6
[  190.872506] lpfc 0000:0b:00.0: 109: [  190.871058]

2:(0):0117

Quoted 4 lines
Quoted 4 lines

Xmit
ELS response x1 to remote NPORT x20300 I/O tag: xb92, size: x8 port_state x20 rpi x10 fc_flag x800110

[  190.872507] lpfc 0000:0b:00.0: 110: [  190.871060]

2:(0):0129

Quoted 4 lines
Quoted 4 lines

Xmit
ELS RJT xb00 response tag xb92 xri xffff, did x20300, nlp_flag x80000000, nlp_state x7, rpi x10

[  190.872509] lpfc 0000:0b:00.0: 111: [  190.871085]

2:(0):0110

Quoted 2 lines
Quoted 2 lines

ELS
response tag xb92 completes Data: x0 x0 x0 x20300 x80000000 x7

x10

Quoted 6 lines
Quoted 6 lines
[  190.872511] lpfc 0000:0b:00.0: 112: [  190.872497] 2:2538

Received
frame rctl:x22, type:x1, frame Data:220a0300 00010600 01290000 00000000
0048ffff 00000000 00000000

[  190.872512] lpfc 0000:0b:00.0: 113: [  190.872500]

2:(0):0929

Quoted 4 lines
Quoted 4 lines

FIND
node DID Data: xffff896e4faf2c00 x10600 x80000000 x7001801 xc xffff896e4faf1200

[  190.872514] lpfc 0000:0b:00.0: 114: [  190.872501]

2:(0):0112

Quoted 5 lines
Quoted 5 lines

ELS
command x14001023 received from NPORT x10600 Data: x20 x800110 xa0300
xa0300

[  190.872515] lpfc 0000:0b:00.0: 2:(0):0115 Unknown ELS

command

Quoted 3 lines
Quoted 3 lines

x14001023 received from NPORT x10600

[  190.873239] lpfc 0000:0b:00.0: start 115 end 121 cnt 6
[  190.873241] lpfc 0000:0b:00.0: 115: [  190.872517]

2:(0):0117

Quoted 4 lines
Quoted 4 lines

Xmit
ELS response x1 to remote NPORT x10600 I/O tag: xb8f, size: x8 port_state x20 rpi xc fc_flag x800110

[  190.873243] lpfc 0000:0b:00.0: 116: [  190.872519]

2:(0):0129

Quoted 4 lines
Quoted 4 lines

Xmit
ELS RJT xb00 response tag xb8f xri xffff, did x10600, nlp_flag x80000000, nlp_state x7, rpi xc

[  190.873244] lpfc 0000:0b:00.0: 117: [  190.872545]

2:(0):0110

Quoted 2 lines
Quoted 2 lines

ELS
response tag xb8f completes Data: x0 x0 x0 x10600 x80000000 x7

xc

Quoted 6 lines
Quoted 6 lines
[  190.873246] lpfc 0000:0b:00.0: 118: [  190.873234] 2:2538

Received
frame rctl:x22, type:x1, frame Data:220a0300 00010700 01290000 00000000
008cffff 00000000 00000000

[  190.873249] lpfc 0000:0b:00.0: 119: [  190.873236]

2:(0):0929

Quoted 5 lines
Quoted 5 lines

FIND
node DID Data: xffff896e4faf0600 x10700 x80000000 x7001801 xd xffff896e4faf3600

I have not investogated the masking changes yet, decided to

first

Quoted 8 lines
Quoted 4 lines

ask.

Thanks
Laurence

Hi Dick I dont see this when booting 5.5, which was when I last tested,
and before I start the long arduous code review and maybe bisect

I

Quoted 3 lines

would rather have you look at it.
Can you look at this please and let me know.
Its not happeniong on latest RHEL8 but could happen if we take

latest

Quoted 5 lines

code in.

Regards
Laurence

Dick
Seems to be all these changes like below. all chamhed to LOG_TRACE_EVENT

- lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT
|
LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_ERR,
LOG_TRACE_EVENT,

OK, Perfect, Thanks Dick
Regards
Laurence