Skip to contentSkip to conversation

: Terratec USB surround broken

ALSA - driver 0000813 [email protected] 1 participant 1 message Jan 26, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=813>
======================================================================

Reported By:                ilikejam
Assigned To:                Clemens Ladisch
======================================================================
Project:                    ALSA - driver
Issue ID:                   813
Category:                   USB - usb-audio
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Distribution:               Fedora Core 3
Kernel Version:             2.6.10 (ALSA compiled in)
======================================================================
Date Submitted:             01-12-2005 19:41 CET
Last Modified:              01-26-2005 11:11 CET

======================================================================
Summary: Terratec USB surround broken
Description:
I'm using a Terratec USB 5.1 card. The 6 channels test correctly using './speaker-test -c6', but any attempt to use 5.1 channel in Xine, or using 'aplay -Dsurround51 file.wav' results in errors e.g.
-----
ALSA lib pcm.c:1851:(snd_pcm_open_conf) Invalid type for PCM surround51 definition (id: surround51, value: cards.pcm.surround51)
aplay: main:508: audio open error: Invalid argument
-----
Xine similarly fails saying the sound card is in use. Xine works fine for stereo audio, even when configured to use 5.1 channel sound.
======================================================================

----------------------------------------------------------------------
Clemens Ladisch - 01-26-05 10:40
----------------------------------------------------------------------
The "surround51" device is used to configure some cards for 5.1 output, but this special configuration is not possible for USB devices because there are so many different models.

However, USB devices don't need to be separately configured for 5.1 output, so just use a standard device name (like "default" or "plughw" or "hw").

As for the sample rate: what are the contents of /proc/asound/cardX/stream0 while you are recording?

----------------------------------------------------------------------
ilikejam - 01-26-05 11:11
----------------------------------------------------------------------
The contents of /proc/asound/card0/stream0 are:
USB Audio at usb-0000:00:10.2-1, full speed : USB Audio

Playback:
Status: Stop
Interface 1

    Altset 1
    Format: S16_LE
    Channels: 2
    Endpoint: 1 OUT (ADAPTIVE)
    Rates: 48000
  Interface 1
    Altset 2
    Format: S16_LE
    Channels: 6
    Endpoint: 1 OUT (ADAPTIVE)
    Rates: 48000

Capture:
Status: Running
Interface = 2
Altset = 1
URBs = 5 [ 4 4 4 4 4 ]
Packet Size = 200
Momentary freq = 48000 Hz
Interface 2

    Altset 1
    Format: S16_LE
    Channels: 2
    Endpoint: 2 IN (ASYNC)
    Rates: 48000

Audio from, say, downloaded MP3s sounds fine, but any audio I've recorded (in whatever program) has to have its sample rate changed, or it sounds too fast.

I just tried 'default' in the configuration for 5.1 channel sound in Xine, and it works just fine. Yay.

Issue History
Date Modified Username Field Change
======================================================================

01-12-05 19:41 ilikejam       New Issue                                    
01-12-05 19:41 ilikejam       Distribution              => Fedora Core 3   
01-12-05 19:41 ilikejam       Kernel Version            => 2.6.10 (ALSA compiled

in)
01-26-05 09:02 ilikejam Note Added: 0003413
01-26-05 10:40 Clemens LadischNote Added: 0003414
01-26-05 11:11 ilikejam Note Added: 0003415
======================================================================

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl