Skip to contentSkip to conversation

Date/Time problems on an IBM Desktop ? (P4-2.8ghz)

DISCUSSION Robert Harris 1 participant 1 message Nov 17, 2004

lore
Share & tools
lore
#0 lore raw

I'm testing the 2.4.27 kernel on an IBM ThinkCentre A30 Desktop. The system has a P4 2.8Ghz processor, 512 Megs of ram and IDE disk. The clock on the system is very much off. Using the "/bin/date" command it seems to actually count 1 second for every 10 or so. Under load this can be even slower. I've reproduced this on 3 separate pieces of hardware.

Has anyone run into this or have an idea? My next step is to try an older kernel with the same config but that may take a bit to get built and tested.

Robert

Signature · 8 lines
:wq!
---------------------------------------------------------------------------
Robert L. Harris

DISCLAIMER:
      These are MY OPINIONS             With Dreams To Be A King,
       ALONE.  I speak for              First One Should Be A Man
       no-one else.                       - Manowar