Hauppauge Nova-T 500 regression in dib0700
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Sorry I'm not sure the appropriate place to look to find any updates with this issue, is there a bug filed somewhere?
I was wondering if any progress has been made with this issue? I have what appears to be the same problem.
Can you offer any advice on getting this tuner card working with ubuntu Jaunty? Obviously I guess the choices are compile an old kernel, or remove said update from v4l, but I ask anyway just incase there is a better option, or something happening in the near future I could just wait on.
Thanks
Carey
Le lundi 28 septembre 2009 11:02:59, vous avez écrit :
Quoted 6 lines
I was wondering if any progress has been made with this issue? I have what appears to be the same problem.
Can you offer any advice on getting this tuner card working with ubuntu
Jaunty? Obviously I guess the choices are compile an old kernel, or remove said update from v4l, but I ask anyway just incase there is a better option, or something happening in the near future I could just wait on.
You may have a problem similar to my Nova-T usb box (you card is also using USB).
Here's the behavior I see since 2.6.28 (or so): all modules required for nova- T are loaded, and device files created BEFORE the usb box is ready. Sometimes, the red LED on the box lights up after 20s, sometimes after 60s.
Needless to say, if vdr starts before the LED goes on, the Nova-T device is not seen by vdr.
I have no real solution. The only work-around I've found is to delay vdr start with a 'sleep 60' in its startup script.
Hope this helps