Skip to contentSkip to conversation

❌ FAIL: Stable queue: queue-5.3

DISCUSSION CKI Project 1 participant 1 message Nov 26, 2019 Stable branch

lore
Share & tools
lore
#0 lore raw

Hello,

We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to:

Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: cea54ae336ae - Linux 5.3.13

The results of these automated tests are provided below.

Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: FAILED

All kernel binaries, config files, and logs are available for download here:

https://artifacts.cki-project.org/pipelines/307687

One or more kernel tests failed:

ppc64le:
❌ Boot test

We hope that these logs can help you find the problem quickly. For the full detail on our testing procedures, please scroll to the bottom of this message.

Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective.

        ,-.   ,-.
       ( C ) ( K )  Continuous
        `-',-.`-'   Kernel
          ( I )     Integration
           `-'

______________________________________________________________________________

Merge testing
-------------

We cloned this repository and checked out the following commit:

Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: cea54ae336ae - Linux 5.3.13

We grabbed the 52eec70445d5 commit of the stable queue repository.

We then merged the patchset with git am:

mlxsw-spectrum_router-fix-determining-underlay-for-a-gre-tunnel.patch net-mlx4_en-fix-mlx4-ethtool-n-insertion.patch net-mlx4_en-fix-wrong-limitation-for-number-of-tx-rings.patch net-rtnetlink-prevent-underflows-in-do_setvfinfo.patch net-sched-act_pedit-fix-warn-in-the-traffic-path.patch net-sched-ensure-opts_len-ip_tunnel_opts_max-in-act_tunnel_key.patch sfc-only-cancel-the-pps-workqueue-if-it-exists.patch net-mlxfw-verify-fsm-error-code-translation-doesn-t-exceed-array-size.patch net-mlx5e-fix-set-vf-link-state-error-flow.patch net-mlx5-fix-auto-group-size-calculation.patch net-tls-enable-sk_msg-redirect-to-tls-socket-egress.patch ipv6-route-return-if-there-is-no-fib_nh_gw_family.patch mdio_bus-fix-mdio_register_device-when-reset_controller-is-disabled.patch taprio-don-t-reject-same-mqprio-settings.patch net-ipv4-fix-sysctl-max-for-fib_multipath_hash_policy.patch net-mlx5e-fix-error-flow-cleanup-in-mlx5e_tc_tun_create_header_ipv4-6.patch net-mlx5e-do-not-use-non-ext-link-modes-in-ext-mode.patch net-mlx5-update-the-list-of-the-pci-supported-devices.patch

Compile testing
---------------

We compiled the kernel for 4 architectures:

aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

s390x:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

Hardware testing
----------------
We booted each kernel and ran the following tests:

aarch64:
Host 1:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func: local
✅ Networking route_func: forward
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ stress: stress-ng
🚧 ❌ jvm test suite
🚧 ✅ iotop: sanity

Host 2:
✅ Boot test
🚧 ✅ selinux-policy: serge-testsuite

ppc64le:
Host 1:
✅ Boot test
🚧 ✅ selinux-policy: serge-testsuite

Host 2:
❌ Boot test
⚡⚡⚡ Podman system integration test (as root) ⚡⚡⚡ Podman system integration test (as user) ⚡⚡⚡ LTP
⚡⚡⚡ AMTU (Abstract Machine Test Utility) ⚡⚡⚡ LTP: openposix test suite
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func: local
⚡⚡⚡ Networking route_func: forward ⚡⚡⚡ audit: audit testsuite test
⚡⚡⚡ httpd: mod_ssl smoke sanity
⚡⚡⚡ tuned: tune-processes-through-perf 🚧 ⚡⚡⚡ jvm test suite
🚧 ⚡⚡⚡ iotop: sanity

s390x:

⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.

x86_64:
Host 1:
✅ Boot test
🚧 ✅ selinux-policy: serge-testsuite

Host 2:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func: local
✅ Networking route_func: forward
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ pciutils: sanity smoke test
✅ stress: stress-ng
🚧 ✅ jvm test suite
🚧 ✅ iotop: sanity

Test sources: https://github.com/CKI-project/tests-beaker
💚 Pull requests are welcome for new tests or improvements to existing tests!

Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.

Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't finished running are marked with ⏱. Reports for non-upstream kernels have a Beaker recipe linked to next to each host.