lvm on raid, vgcreate doesn't create vg

Hi,

I have successfully setup lvm on top of my software raid 1 (two ide-disks, hda, hdb, two raid1 on top, md0 and md1, one as root and one for the first volume group, vg0). Everything works as expected, no problems at all.

Now I want to put two more disks (hdc/hdd) in the machine. For simplicity reasons (the data is on the second disk) I describe the problem with one harddisk:

/etc/raidtab
[...]
raiddev /dev/md3
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
persistent-superblock 1
device /dev/hdc1
raid-disk 0
device /dev/hdd1
failed-disk 1

root@fs:~# mkraid /dev/md3
handling MD device /dev/md3
analyzing super-block
disk 0: /dev/hdc1, 100522768kB, raid superblock at 100522688kB
disk 1: /dev/hdd1, failed
root@fs:~# pvcreate /dev/md3
  Physical volume "/dev/md3" successfully created
root@fs:~# vgcreate -v vgnew /dev/md3
    Adding physical volume '/dev/md3' to volume group 'vgnew'
    Archiving volume group "vgnew" metadata.
    Creating volume group backup "/etc/lvm/backup/vgnew"
  Volume group "vgnew" successfully created
root@fs:~# vgscan
  Reading all physical volumes.  This may take a while...
  Found volume group "vg0" using metadata type lvm2
root@fs:~# lvcreate -L 83G -n smb2 vgnew
  Volume group "vgnew" doesn't exist

Uah. Whats that? Creating a filesystem on md3 is no problem, data can be written and read, mounted, unmounted. So, I decided to test without md:

root@fs:~# pvremove /dev/md3
  Labels on physical volume "/dev/md3" successfully wiped
root@fs:~# raidstop /dev/md3
root@fs:~# pvcreate /dev/hdc1
  Physical volume "/dev/hdc1" successfully created
root@fs:~# vgcreate -v vgnew /dev/hdc1
    Adding physical volume '/dev/hdc1' to volume group 'vgnew'
    Archiving volume group "vgnew" metadata.
    Creating volume group backup "/etc/lvm/backup/vgnew"
  Volume group "vgnew" successfully created
root@fs:~# vgscan
  Reading all physical volumes.  This may take a while...
  Found volume group "vgnew" using metadata type lvm2
  Found volume group "vg0" using metadata type lvm2
root@fs:~# lvcreate -L 83G -n smb2 vgnew
  Logical volume "smb2" created
root@fs:~# ls -al /dev/vgnew/
total 32
drwx------   2 root root  4096 Nov  8 12:59 .
drwxr-xr-x  16 root root 28672 Nov  8 12:59 ..
lrwxrwxrwx   1 root root    22 Nov  8 12:59 smb2 -> /dev/mapper/vgnew-smb2

Hmm, this works. Whats up with creating lvm on top of raid? On the same machine this works (vg0) without problems. There a no strange messages in syslog, no dmessages etc. I have put the lvm2.log (with the requested config-parameters from http://www.tldp.org/HOWTO/LVM-HOWTO/reportbug.html)
here: http://www.meissner.it/lvm2.log.gz

Some machine-data:

Debian testing/sarge
AMD Athlon(TM) XP 1900+
Linux fs 2.6.8-1-k7 #1 Thu Oct 7 02:47:47 EDT 2004 i686 GNU/Linux

ii  lvm-common  1.5.17
ii  lvm2        2.00.24-1 
ii  raidtools2  1.00.3-15

How can I trace the problem? Any hints?

Beste Gruesse / Best regards Markus Meissner