seems that device is not found
Learning...
OK, I have just installed a ready fresh Fedora Core 3 distribution kernel 2.6.9-1.667, no additional packages from bluez.org (I'm guessing they are included in my linux distribution, is this correct?). So, I plug a Conceptronic CBT100U adapter device (listed in bluetooth adapter list www.holtmann.org), execute hcitool dev, and all I get is:
Devices:
...anything else. By the way, I get the same response in three different linux boxes with the same kernel version.
I'm afraid this is not the best welcome I could hope, or it is? so I would like your opinion for that. Also, I wonder how can I know which of the bluez downloads should I install and which don't, and how can I know if they are already installed on my system (also Linux novice, excuses for that..)
Thanks in advance,
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi,
Quoted 6 lines
OK, I have just installed a ready fresh Fedora Core 3 distribution kernel 2.6.9-1.667, no additional packages from bluez.org (I'm guessing they are included in my linux distribution, is this correct?). So, I plug a Conceptronic CBT100U adapter device (listed in bluetooth adapter list www.holtmann.org), execute hcitool dev, and all I get is:
Quoted 8 lines
Devices:
...anything else. By the way, I get the same response in three different linux boxes with the same kernel version.
I'm afraid this is not the best welcome I could hope, or it is? so I would like your opinion for that. Also, I wonder how can I know which of the bluez downloads should I install and which don't, and how can I know if they are already installed on my system (also Linux novice, excuses for that..)
check with "hciconfig -a" if your device is detected and if it is up and running.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Thanks Marcel!
Well, I'm enjoying quite a lot now...
I wasn't able to execute hciconfig, it is not in the path variable by default so I have to fix it.
Once I discovered the hciconfig tool I got very happy and set the device up (by the way I needed root privileges)
So far, so good:
[root@castejon sbin]# ./hciconfig -a hci0 up
[root@castejon sbin]# ./hciconfig -a
hci0: Type: USB
BD Address: 00:10:60:A5:96:AA ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:71 acl:0 sco:0 events:8 errors:0
TX bytes:31 acl:0 sco:0 commands:8 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'Luis'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver:0x33c
Manufacturer: Cambridge Silicon Radio (10)
Thanks!
"Marcel Holtmann" <[email protected]> escribi� en el mensaje news:1101204892.26578.63.camel@pegasus...
Quoted 3 lines
Hi,
Quoted 1 line
OK, I have just installed a ready fresh Fedora Core 3 distribution
kernel
Quoted 1 line
Quoted 1 line
2.6.9-1.667, no additional packages from bluez.org (I'm guessing they
are
Quoted 9 lines
Quoted 9 lines
included in my linux distribution, is this correct?). So, I plug a Conceptronic CBT100U adapter device (listed in bluetooth adapter list www.holtmann.org), execute hcitool dev, and all I get is:
Devices:
...anything else. By the way, I get the same response in three different linux boxes with the same kernel version.
I'm afraid this is not the best welcome I could hope, or it is? so I
would
Quoted 1 line
Quoted 1 line
like your opinion for that. Also, I wonder how can I know which of the
bluez
Quoted 1 line
Quoted 1 line
downloads should I install and which don't, and how can I know if they
are
Quoted 12 lines
Quoted 1 line
already installed on my system (also Linux novice, excuses for that..)
check with "hciconfig -a" if your device is detected and if it is up and running.
Regards
Marcel
Quoted 5 lines
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users