Skip to contentSkip to conversation

2 ISP Routing Problem

LARTC [email protected] 1 participant 1 message Apr 4, 2004

lore
Share & tools
lore
#0 lore raw

Hello,I have single linux router ( fedora core 1 ), 2 ISP, 1 internal network,1 IP space from every ISP
My scenario:
eth0 1.0.0.2 netmask 255.255.255.252 -> ISP 1
eth1 2.0.0.2 netmask 255.255.255.252 -> ISP 2
eth2 1.0.1.1 netmask 255.255.255.0 -> IP space from ISP1 eth3 2.0.1.1 netmask 255.255.255.0 -> IP space from ISP2

Config I try:
/etc/iproute2/rt_tables:
10 isp1
20 isp2

ip add rule from 1.0.1.0/24 table isp1
ip add rule from 2.0.1.0/24 table isp2
route del default
ip route add default via 1.0.0.1 table isp1
ip route add default via 2.0.0.1 table isp2

At this point workstations connected to eth2 and eth3 connect to internet fine.
BUT: with this config I can't communicate with workstations. If I try 'ping 1.0.1.2' I can see thah all packets with source IP1.0.1.1 are sent to eth0, and packets with source IP 2.0.1.1 are sent to eth1.

#ip route get from 1.0.1.1 to 1.0.1.2
1.0.1.2 from 1.0.1.1 via 1.0.0.1

So, question is: How to setup iproute2, so kernel first consult internal routing table:

1.0.1.0/24 dev eth2  proto kernel  scope link  src 1.0.1.1
2.0.1.0/24 dev eth3  proto kernel  scope link  src 2.0.1.1 

and AFTER THIS default routes I create with 'ip route default via ...'

PS: All IP's are real, I don't use 10.x.x.x...
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/