Skip to contentSkip to conversation

Compile only devices that are used

PATCH Superseded Juan Quintela 1 participant 31 messages Aug 27, 2009 Kbuild

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover Compile only devices that are used

The new config file version!!!!!

v3:
- Now we have a config file by target!!!
- We have configure tool to choose what drivers to compile
vi <target>/config-devices.mak
- We have another nice tool to check if a config file is valid
make: if it compiles, it is good, otherwise go to previous step
- Renamed config.h/config.mak to config-target.h and config-target.{h,mak} now config.h is not generated, and we can put more stuff there
- I did a go at trying to create config-devices.h, but it is _interesting_ as we have different names, and have to put one of the files. That is the reason why I did the automatic generation of *.h files from *.mak files.
- I switched previus patches to this new series.

ToDo:
- there is still a bug when compiling with make -j<n>, sometimes it don't generate config-host.h. Still haven't been able to catch why. Normally it works, that is the reason why it is not esay to find what is wrong.
- Pass more stuff to that configuration files.

Comments?

v2:
- ptimer is also used in sparc64 (Blue Swirl)
- generate and compile gdbstub-xml only when needed.

v1:
This series disable complilation of devices that are not used in any of the selected targets. Patch series remove all the devices that are not used for x86_64/i386-softmmu alone. If you also compiles the softmmu targets that need them, they are compiled back in.

I sent similar patches to this series a couple of months ago. The big different (for those with good memory) is that now I don't move devices from Makefile.hw and Makefile to Makefile.target. I just enable/disable them with CONFIG_FOO and normal building system.

I didn't do it for other platform because I don't have an easy way to test that I haven't broke anything. Anyone that uses other platform can do the same simplification there.

Juan Quintela (30):
Don't include config-host.mak from inside config.mak Move generation of config-host.h to Makefile from configure Remove useless check for config-host.mak
Rename config.{h,mak} config-target.{h,mak}
Move generation of config-target.h to Makefile from configure Add new config-devices.mak for each target
Generate gdbstub-xml.c only when needed
Only compile usb_ohci when one target uses it
Only compile isa_mmio when one target uses it
Only compile qdev_addr when one target uses it
Only compile nand when one target uses it
Only compile ecc when one target uses it
Only compile esp when one target uses it
Only compile escc when one target uses it
Only compile m48t59 when one target uses it
Only compile ptimer when one target uses it
Only compile sd when one target uses it
Only compile max7310 when one target uses it
Only compile wm8750 when one target uses it
Only compile twl92230 when one target uses it
Only compile tsc2005 when one target uses it
Only compile lm832x when one target uses it
Only compile tmp105 when one target uses it
Only compile stellaris_input when one target uses it Only compile sd0303 when one target uses it
Only compile sd0323 when one target uses it
Only compile ads7846 when one target uses it
Only compile max111x when one target uses it
Only compile ssi-sd when one target uses it
Only compile ssi when one target uses it

 .gitignore                                 |    3 +
 Makefile                                   |   52 +++++++---
 Makefile.hw                                |   13 ++-
 Makefile.target                            |   30 +++---
 config.h                                   |    3 +
 configure                                  |  150 ++++++++++++----------------
 create_config                              |    2 +
 default-configs/alpha-linux-user.mak       |    1 +
 default-configs/arm-linux-user.mak         |    3 +
 default-configs/arm-softmmu.mak            |   22 ++++
 default-configs/armeb-linux-user.mak       |    3 +
 default-configs/cris-linux-user.mak        |    1 +
 default-configs/cris-softmmu.mak           |    3 +
 default-configs/i386-bsd-user.mak          |    1 +
 default-configs/i386-darwin-user.mak       |    1 +
 default-configs/i386-linux-user.mak        |    1 +
 default-configs/i386-softmmu.mak           |    1 +
 default-configs/m68k-linux-user.mak        |    3 +
 default-configs/m68k-softmmu.mak           |    3 +
 default-configs/microblaze-linux-user.mak  |    1 +
 default-configs/microblaze-softmmu.mak     |    1 +
 default-configs/mips-linux-user.mak        |    1 +
 default-configs/mips-softmmu.mak           |    4 +
 default-configs/mips64-softmmu.mak         |    4 +
 default-configs/mips64el-softmmu.mak       |    4 +
 default-configs/mipsel-linux-user.mak      |    1 +
 default-configs/mipsel-softmmu.mak         |    4 +
 default-configs/ppc-darwin-user.mak        |    3 +
 default-configs/ppc-linux-user.mak         |    3 +
 default-configs/ppc-softmmu.mak            |    7 ++
 default-configs/ppc64-linux-user.mak       |    3 +
 default-configs/ppc64-softmmu.mak          |    7 ++
 default-configs/ppc64abi32-linux-user.mak  |    3 +
 default-configs/ppcemb-softmmu.mak         |    7 ++
 default-configs/sh4-linux-user.mak         |    1 +
 default-configs/sh4-softmmu.mak            |    3 +
 default-configs/sh4eb-linux-user.mak       |    1 +
 default-configs/sh4eb-softmmu.mak          |    3 +
 default-configs/sparc-bsd-user.mak         |    1 +
 default-configs/sparc-linux-user.mak       |    1 +
 default-configs/sparc-softmmu.mak          |    7 ++
 default-configs/sparc32plus-linux-user.mak |    1 +
 default-configs/sparc64-bsd-user.mak       |    1 +
 default-configs/sparc64-linux-user.mak     |    1 +
 default-configs/sparc64-softmmu.mak        |    6 +
 default-configs/x86_64-bsd-user.mak        |    1 +
 default-configs/x86_64-linux-user.mak      |    1 +
 default-configs/x86_64-softmmu.mak         |    1 +
 rules.mak                                  |    9 ++
 49 files changed, 268 insertions(+), 119 deletions(-)
 create mode 100644 config.h
 create mode 100644 default-configs/alpha-linux-user.mak
 create mode 100644 default-configs/arm-linux-user.mak
 create mode 100644 default-configs/arm-softmmu.mak
 create mode 100644 default-configs/armeb-linux-user.mak
 create mode 100644 default-configs/cris-linux-user.mak
 create mode 100644 default-configs/cris-softmmu.mak
 create mode 100644 default-configs/i386-bsd-user.mak
 create mode 100644 default-configs/i386-darwin-user.mak
 create mode 100644 default-configs/i386-linux-user.mak
 create mode 100644 default-configs/i386-softmmu.mak
 create mode 100644 default-configs/m68k-linux-user.mak
 create mode 100644 default-configs/m68k-softmmu.mak
 create mode 100644 default-configs/microblaze-linux-user.mak
 create mode 100644 default-configs/microblaze-softmmu.mak
 create mode 100644 default-configs/mips-linux-user.mak
 create mode 100644 default-configs/mips-softmmu.mak
 create mode 100644 default-configs/mips64-softmmu.mak
 create mode 100644 default-configs/mips64el-softmmu.mak
 create mode 100644 default-configs/mipsel-linux-user.mak
 create mode 100644 default-configs/mipsel-softmmu.mak
 create mode 100644 default-configs/ppc-darwin-user.mak
 create mode 100644 default-configs/ppc-linux-user.mak
 create mode 100644 default-configs/ppc-softmmu.mak
 create mode 100644 default-configs/ppc64-linux-user.mak
 create mode 100644 default-configs/ppc64-softmmu.mak
 create mode 100644 default-configs/ppc64abi32-linux-user.mak
 create mode 100644 default-configs/ppcemb-softmmu.mak
 create mode 100644 default-configs/sh4-linux-user.mak
 create mode 100644 default-configs/sh4-softmmu.mak
 create mode 100644 default-configs/sh4eb-linux-user.mak
 create mode 100644 default-configs/sh4eb-softmmu.mak
 create mode 100644 default-configs/sparc-bsd-user.mak
 create mode 100644 default-configs/sparc-linux-user.mak
 create mode 100644 default-configs/sparc-softmmu.mak
 create mode 100644 default-configs/sparc32plus-linux-user.mak
 create mode 100644 default-configs/sparc64-bsd-user.mak
 create mode 100644 default-configs/sparc64-linux-user.mak
 create mode 100644 default-configs/sparc64-softmmu.mak
 create mode 100644 default-configs/x86_64-bsd-user.mak
 create mode 100644 default-configs/x86_64-linux-user.mak
 create mode 100644 default-configs/x86_64-softmmu.mak
#1 lore raw

PATCH v3 1/30 Don't include config-host.mak from inside config.mak

Include it directly in Makefile.target

---
 Makefile.target |    1 +
 configure       |    2 --
 2 files changed, 1 insertions(+), 2 deletions(-)
Makefile.target +1 -0
index 0f8137b..ede4008 100644
@@ -1,5 +1,6 @@
 # -*- Mode: makefile -*-
 
+include ../config-host.mak
 include config.mak
 include $(SRC_PATH)/rules.mak
 
configure +0 -2
index 5c1065f..99bf3e5 100755
@@ -1847,8 +1847,6 @@ ln -s $source_path/Makefile.target $target_dir/Makefile
 
 echo "# Automatically generated by configure - do not modify" > $config_mak
 
-echo "include ../config-host.mak" >> $config_mak
-
 bflt="no"
 elfload32="no"
 target_nptl="no"
Signature · 1 line
1.6.2.5
#2 lore raw

PATCH v3 2/30 Move generation of config-host.h to Makefile from configure

In reply to Juan Quintela

Use timestamp based appreach to avoid not needed recompilation. Add it to rules.mak

Many thanks to Paolo Bonzini for helpding the design, and the debug.

---
 Makefile      |   10 +++++++---
 configure     |   20 +-------------------
 create_config |    2 ++
 rules.mak     |    9 +++++++++
 4 files changed, 19 insertions(+), 22 deletions(-)
Makefile +7 -3
index e2ea91d..d7db158 100644
@@ -24,7 +24,7 @@ else
 DOCS=
 endif
 
-build-all: $(TOOLS) $(DOCS) recurse-all
+build-all: config-host.h $(TOOLS) $(DOCS) recurse-all
 
 config-host.mak: configure
 ifneq ($(wildcard config-host.mak),)
@@ -32,10 +32,14 @@ ifneq ($(wildcard config-host.mak),)
 	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
 endif
 
+%.c %.h: config-host.h
+config-host.h: config-host.h-timestamp
+config-host.h-timestamp: config-host.mak
+
 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
 SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
 
-subdir-%:
+subdir-%: config-host.h
 	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
 
 $(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
@@ -191,7 +195,7 @@ clean:
         done
 
 distclean: clean
-	rm -f config-host.mak config-host.h config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
+	rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
 	rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
 	for d in $(TARGET_DIRS) libhw32 libhw64; do \
 	rm -rf $$d || exit 1 ; \
configure +1 -19
index 99bf3e5..c2ccd8d 100755
@@ -1522,13 +1522,8 @@ echo "-> Your SDL version is too old - please upgrade to have SDL support"
 fi
 
 config_host_mak="config-host.mak"
-config_host_h="config-host.h"
 config_host_ld="config-host.ld"
 
-#echo "Creating $config_host_mak and $config_host_h"
-
-test -f $config_host_h && mv $config_host_h ${config_host_h}~
-
 echo "# Automatically generated by configure - do not modify" > $config_host_mak
 printf "# Configured with:" >> $config_host_mak
 printf " '%s'" "$0" "$@" >> $config_host_mak
@@ -1765,18 +1760,6 @@ echo "LIBS+=$LIBS" >> $config_host_mak
 echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
 echo "EXESUF=$EXESUF" >> $config_host_mak
 
-echo "/* Automatically generated by configure - do not modify */" > $config_host_h
-
-/bin/sh $source_path/create_config < $config_host_mak >> $config_host_h
-
-if test -f ${config_host_h}~ ; then
-  if cmp -s $config_host_h ${config_host_h}~ ; then
-    mv ${config_host_h}~ $config_host_h
-  else
-    rm ${config_host_h}~
-  fi
-fi
-
 # generate list of library paths for linker script
 
 $ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld}
@@ -2178,8 +2161,7 @@ fi
 echo "LDFLAGS+=$ldflags" >> $config_mak
 echo "QEMU_CFLAGS+=$cflags" >> $config_mak
 
-echo "/* Automatically generated by configure - do not modify */" > $config_h
-echo "#include \"../config-host.h\"" >> $config_h
+echo "#include \"../config-host.h\"" > $config_h
 
 /bin/sh $source_path/create_config < $config_mak >> $config_h
 
create_config +2 -0
index 5bc8fb6..30d0487 100755
@@ -1,5 +1,7 @@
 #!/bin/sh
 
+echo "/* Automatically generated by create_config - do not modify */"
+
 while read line; do
 
 case $line in
rules.mak +9 -0
index c0315ac..3cbfa3d 100644
@@ -23,3 +23,12 @@ quiet-command = $(if $(V),$1,$(if $(2),@echo $2 && $1, @$1))
 
 cc-option = $(shell if $(CC) $(1) $(2) -S -o /dev/null -xc /dev/null \
               > /dev/null 2>&1; then echo "$(2)"; else echo "$(3)"; fi ;)
+
+# Generate timestamp files for .h include files
+
+%.h: %.h-timestamp
+	@test -f $@ || cp $< $@
+
+%.h-timestamp: %.mak
+	$(call quiet-command, $(SRC_PATH)/create_config < $< > $@, "  GEN   $*.h")
+	@cmp $@ $*.h >/dev/null 2>&1 || cp $@ $*.h
Signature · 1 line
1.6.2.5
#3 lore raw

PATCH v3 3/30 Remove useless check for config-host.mak

In reply to Juan Quintela

If config-host.mak dont' exist, we have exited in the check at the beginning of the file.
Once here, move the bits to the else part of the test at the beginning of the file.

---
 Makefile |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)
Makefile +3 -6
index d7db158..bd180f9 100644
@@ -5,6 +5,9 @@ ifneq ($(wildcard config-host.mak),)
 all: build-all
 include config-host.mak
 include $(SRC_PATH)/rules.mak
+config-host.mak: configure
+	@echo $@ is out-of-date, running configure
+	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
 else
 config-host.mak:
 	@echo "Please call configure before running make!"
@@ -26,12 +29,6 @@ endif
 
 build-all: config-host.h $(TOOLS) $(DOCS) recurse-all
 
-config-host.mak: configure
-ifneq ($(wildcard config-host.mak),)
-	@echo $@ is out-of-date, running configure
-	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
-endif
-
 %.c %.h: config-host.h
 config-host.h: config-host.h-timestamp
 config-host.h-timestamp: config-host.mak
Signature · 1 line
1.6.2.5
#4 lore raw

PATCH v3 4/30 Rename config.{h, mak} config-target.{h, mak}

In reply to Juan Quintela

Add config.h file that includes config-target.h and config-host.h

---
 .gitignore      |    1 +
 Makefile        |    2 +-
 Makefile.target |    2 +-
 config.h        |    3 +
 configure       |  116 +++++++++++++++++++++++++++---------------------------
 5 files changed, 64 insertions(+), 60 deletions(-)
 create mode 100644 config.h
.gitignore +1 -0
index d546609..5d6a78e 100644
@@ -1,4 +1,5 @@
 config-host.*
+config-target.*
 i386
 *-softmmu
 *-darwin-user
Makefile +1 -1
index bd180f9..7664c83 100644
@@ -182,7 +182,7 @@ qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
 
 clean:
 # avoid old build problems by removing potentially incorrect old files
-	rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
+	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 	rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
 	rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
 	rm -f qemu-img-cmds.h
Makefile.target +1 -1
index ede4008..ae88fc9 100644
@@ -1,7 +1,7 @@
 # -*- Mode: makefile -*-
 
 include ../config-host.mak
-include config.mak
+include config-target.mak
 include $(SRC_PATH)/rules.mak
 
 TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
config.h new file +3 -0
new file mode 100644
index 0000000..516acee
@@ -0,0 +1,3 @@
+
+#include "config-host.h"
+#include "config-target.h"
configure +58 -58

285 lines not on this page · raw message

Signature · 1 line
1.6.2.5
#5 lore raw

PATCH v3 5/30 Move generation of config-target.h to Makefile from configure

In reply to Juan Quintela
---
 Makefile.target |    6 +++++-
 configure       |   17 -----------------
 2 files changed, 5 insertions(+), 18 deletions(-)
Makefile.target +5 -1
index ae88fc9..2f75e6d 100644
@@ -26,7 +26,11 @@ LIBS+=-lm
 
 kvm.o kvm-all.o: QEMU_CFLAGS+=$(KVM_CFLAGS)
 
-all: $(PROGS)
+%.c %.h: config-target.h
+config-target.h: config-target.h-timestamp
+config-target.h-timestamp: config-target.mak
+
+all: config-target.h $(PROGS)
 # Dummy command so that make thinks it has done something
 	@true
 
configure +0 -17
index 061156e..93bc4d0 100755
@@ -1775,7 +1775,6 @@ fi
 for target in $target_list; do
 target_dir="$target"
 config_target_mak=$target_dir/config-target.mak
-config_target_h=$target_dir/config-target.h
 target_arch2=`echo $target | cut -d '-' -f 1`
 target_bigendian="no"
 case "$target_arch2" in
@@ -1810,10 +1809,6 @@ case "$target" in
     ;;
 esac
 
-#echo "Creating $config_target_mak, $config_target_h and $target_dir/Makefile"
-
-test -f $config_target_h && mv $config_target_h ${config_target_h}~
-
 mkdir -p $target_dir
 mkdir -p $target_dir/fpu
 mkdir -p $target_dir/tcg
@@ -2161,18 +2156,6 @@ fi
 echo "LDFLAGS+=$ldflags" >> $config_target_mak
 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
 
-echo "#include \"../config-host.h\"" > $config_target_h
-
-/bin/sh $source_path/create_config < $config_target_mak >> $config_target_h
-
-if test -f ${config_target_h}~ ; then
-  if cmp -s $config_target_h ${config_target_h}~ ; then
-    mv ${config_target_h}~ $config_target_h
-  else
-    rm ${config_target_h}~
-  fi
-fi
-
 done # for target in $targets
 
 # build tree in object directory if source path is different from current one
Signature · 1 line
1.6.2.5
#6 lore raw

PATCH v3 6/30 Add new config-devices.mak for each target

In reply to Juan Quintela

We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main Makefile for them.

---
 .gitignore                                 |    2 ++
 Makefile                                   |    8 +++++++-
 Makefile.hw                                |    1 +
 Makefile.target                            |    1 +
 configure                                  |   15 +++++++++++++++
 default-configs/alpha-linux-user.mak       |    1 +
 default-configs/arm-linux-user.mak         |    1 +
 default-configs/arm-softmmu.mak            |    1 +
 default-configs/armeb-linux-user.mak       |    1 +
 default-configs/cris-linux-user.mak        |    1 +
 default-configs/cris-softmmu.mak           |    1 +
 default-configs/i386-bsd-user.mak          |    1 +
 default-configs/i386-darwin-user.mak       |    1 +
 default-configs/i386-linux-user.mak        |    1 +
 default-configs/i386-softmmu.mak           |    1 +
 default-configs/m68k-linux-user.mak        |    1 +
 default-configs/m68k-softmmu.mak           |    1 +
 default-configs/microblaze-linux-user.mak  |    1 +
 default-configs/microblaze-softmmu.mak     |    1 +
 default-configs/mips-linux-user.mak        |    1 +
 default-configs/mips-softmmu.mak           |    1 +
 default-configs/mips64-softmmu.mak         |    1 +
 default-configs/mips64el-softmmu.mak       |    1 +
 default-configs/mipsel-linux-user.mak      |    1 +
 default-configs/mipsel-softmmu.mak         |    1 +
 default-configs/ppc-darwin-user.mak        |    1 +
 default-configs/ppc-linux-user.mak         |    1 +
 default-configs/ppc-softmmu.mak            |    1 +
 default-configs/ppc64-linux-user.mak       |    1 +
 default-configs/ppc64-softmmu.mak          |    1 +
 default-configs/ppc64abi32-linux-user.mak  |    1 +
 default-configs/ppcemb-softmmu.mak         |    1 +
 default-configs/sh4-linux-user.mak         |    1 +
 default-configs/sh4-softmmu.mak            |    1 +
 default-configs/sh4eb-linux-user.mak       |    1 +
 default-configs/sh4eb-softmmu.mak          |    1 +
 default-configs/sparc-bsd-user.mak         |    1 +
 default-configs/sparc-linux-user.mak       |    1 +
 default-configs/sparc-softmmu.mak          |    1 +
 default-configs/sparc32plus-linux-user.mak |    1 +
 default-configs/sparc64-bsd-user.mak       |    1 +
 default-configs/sparc64-linux-user.mak     |    1 +
 default-configs/sparc64-softmmu.mak        |    1 +
 default-configs/x86_64-bsd-user.mak        |    1 +
 default-configs/x86_64-linux-user.mak      |    1 +
 default-configs/x86_64-softmmu.mak         |    1 +
 46 files changed, 67 insertions(+), 1 deletions(-)
 create mode 100644 default-configs/alpha-linux-user.mak
 create mode 100644 default-configs/arm-linux-user.mak
 create mode 100644 default-configs/arm-softmmu.mak
 create mode 100644 default-configs/armeb-linux-user.mak
 create mode 100644 default-configs/cris-linux-user.mak
 create mode 100644 default-configs/cris-softmmu.mak
 create mode 100644 default-configs/i386-bsd-user.mak
 create mode 100644 default-configs/i386-darwin-user.mak
 create mode 100644 default-configs/i386-linux-user.mak
 create mode 100644 default-configs/i386-softmmu.mak
 create mode 100644 default-configs/m68k-linux-user.mak
 create mode 100644 default-configs/m68k-softmmu.mak
 create mode 100644 default-configs/microblaze-linux-user.mak
 create mode 100644 default-configs/microblaze-softmmu.mak
 create mode 100644 default-configs/mips-linux-user.mak
 create mode 100644 default-configs/mips-softmmu.mak
 create mode 100644 default-configs/mips64-softmmu.mak
 create mode 100644 default-configs/mips64el-softmmu.mak
 create mode 100644 default-configs/mipsel-linux-user.mak
 create mode 100644 default-configs/mipsel-softmmu.mak
 create mode 100644 default-configs/ppc-darwin-user.mak
 create mode 100644 default-configs/ppc-linux-user.mak
 create mode 100644 default-configs/ppc-softmmu.mak
 create mode 100644 default-configs/ppc64-linux-user.mak
 create mode 100644 default-configs/ppc64-softmmu.mak
 create mode 100644 default-configs/ppc64abi32-linux-user.mak
 create mode 100644 default-configs/ppcemb-softmmu.mak
 create mode 100644 default-configs/sh4-linux-user.mak
 create mode 100644 default-configs/sh4-softmmu.mak
 create mode 100644 default-configs/sh4eb-linux-user.mak
 create mode 100644 default-configs/sh4eb-softmmu.mak
 create mode 100644 default-configs/sparc-bsd-user.mak
 create mode 100644 default-configs/sparc-linux-user.mak
 create mode 100644 default-configs/sparc-softmmu.mak
 create mode 100644 default-configs/sparc32plus-linux-user.mak
 create mode 100644 default-configs/sparc64-bsd-user.mak
 create mode 100644 default-configs/sparc64-linux-user.mak
 create mode 100644 default-configs/sparc64-softmmu.mak
 create mode 100644 default-configs/x86_64-bsd-user.mak
 create mode 100644 default-configs/x86_64-linux-user.mak
 create mode 100644 default-configs/x86_64-softmmu.mak
.gitignore +2 -0
index 5d6a78e..0c4d7c9 100644
@@ -1,3 +1,5 @@
+config-devices.*
+config-all-devices.*
 config-host.*
 config-target.*
 i386
Makefile +7 -1
index 7664c83..acca106 100644
@@ -27,6 +27,13 @@ else
 DOCS=
 endif
 
+SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
+
+config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
+	$(call quiet-command,grep "=y$$" $(SUBDIR_DEVICES_MAK) | sort -u > $@,"  GEN  $@")
+
+include config-all-devices.mak
+
 build-all: config-host.h $(TOOLS) $(DOCS) recurse-all
 
 %.c %.h: config-host.h
@@ -42,7 +49,6 @@ subdir-%: config-host.h
 $(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
 $(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
 
-
 ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
 romsubdir-%:
 	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
Makefile.hw +1 -0
index 6472ec1..b48d1af 100644
@@ -1,6 +1,7 @@
 # Makefile for qemu target independent devices.
 
 include ../config-host.mak
+include ../config-all-devices.mak
 include config.mak
 include $(SRC_PATH)/rules.mak
 
Makefile.target +1 -0
index 2f75e6d..4ce6a3d 100644
@@ -1,6 +1,7 @@
 # -*- Mode: makefile -*-
 
 include ../config-host.mak
+include config-devices.mak
 include config-target.mak
 include $(SRC_PATH)/rules.mak
 
configure +15 -0
index 93bc4d0..27822f9 100755
@@ -1772,11 +1772,16 @@ if test -f ${config_host_ld}~ ; then
   fi
 fi
 
+# Temporary all devices configuration
+rm -f config-all-devices.mak.temp
+touch config-all-devices.mak.temp
+
 for target in $target_list; do
 target_dir="$target"
 config_target_mak=$target_dir/config-target.mak
 target_arch2=`echo $target | cut -d '-' -f 1`
 target_bigendian="no"
+
 case "$target_arch2" in
   armeb|m68k|microblaze|mips|mipsn32|mips64|ppc|ppcemb|ppc64|ppc64abi32|sh4eb|sparc|sparc64|sparc32plus)
   target_bigendian=yes
@@ -1816,6 +1821,11 @@ if test "$target" = "arm-linux-user" -o "$target" = "armeb-linux-user" -o "$targ
   mkdir -p $target_dir/nwfpe
 fi
 
+if test ! -f $target_dir/config-devices.mak ; then
+  cp $source_path/default-configs/${target}.mak $target_dir/config-devices.mak
+  cat $source_path/default-configs/${target}.mak >> config-all-devices.mak.temp
+fi
+
 #
 # don't use ln -sf as not all "ln -sf" over write the file/link
 #
@@ -2158,6 +2168,11 @@ echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
 
 done # for target in $targets
 
+echo "# This is a generated config file from all the devices selected" > config-all-devices.mak
+echo "# Don't edit it" >> config-all-devices.mak
+grep "=y$" config-all-devices.mak.temp >> config-all-devices.mak
+rm config-all-devices.mak.temp
+
 # build tree in object directory if source path is different from current one
 if test "$source_path_used" = "yes" ; then
     DIRS="tests tests/cris slirp audio block pc-bios/optionrom"
default-configs/alpha-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..7956e29
@@ -0,0 +1 @@
+# Default configuration for alpha-linux-user
default-configs/arm-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..413361a
@@ -0,0 +1 @@
+# Default configuration for arm-linux-user
default-configs/arm-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..372a549
@@ -0,0 +1 @@
+# Default configuration for arm-softmmu
default-configs/armeb-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..bf2ffe7
@@ -0,0 +1 @@
+# Default configuration for armeb-linux-user
default-configs/cris-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..e3aec7b
@@ -0,0 +1 @@
+# Default configuration for cris-linux-user
default-configs/cris-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..3726699
@@ -0,0 +1 @@
+# Default configuration for cris-softmmu
default-configs/i386-bsd-user.mak new file +1 -0
new file mode 100644
index 0000000..af1b31a
@@ -0,0 +1 @@
+# Default configuration for i386-bsd-user
default-configs/i386-darwin-user.mak new file +1 -0
new file mode 100644
index 0000000..19afd3d
@@ -0,0 +1 @@
+# Default configuration for i386-darwin-user
default-configs/i386-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..8657e68
@@ -0,0 +1 @@
+# Default configuration for i386-linux-user
default-configs/i386-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..15586a0
@@ -0,0 +1 @@
+# Default configuration for i386-softmmu
default-configs/m68k-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..06cd5ed
@@ -0,0 +1 @@
+# Default configuration for m68k-linux-user
default-configs/m68k-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..572b868
@@ -0,0 +1 @@
+# Default configuration for m68k-softmmu
default-configs/microblaze-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..566fdc0
@@ -0,0 +1 @@
+# Default configuration for microblaze-linux-user
default-configs/microblaze-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..c42009d
@@ -0,0 +1 @@
+# Default configuration for microblaze-softmmu
default-configs/mips-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..31df570
@@ -0,0 +1 @@
+# Default configuration for mips-linux-user
default-configs/mips-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..a9e89ec
@@ -0,0 +1 @@
+# Default configuration for mips-softmmu
default-configs/mips64-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..4211452
@@ -0,0 +1 @@
+# Default configuration for mips64-softmmu
default-configs/mips64el-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..8ca46a2
@@ -0,0 +1 @@
+# Default configuration for mips64el-softmmu
default-configs/mipsel-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..4d0e4af
@@ -0,0 +1 @@
+# Default configuration for mipsel-linux-user
default-configs/mipsel-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..fe8af41
@@ -0,0 +1 @@
+# Default configuration for mipsel-softmmu
default-configs/ppc-darwin-user.mak new file +1 -0
new file mode 100644
index 0000000..117f176
@@ -0,0 +1 @@
+# Default configuration for ppc-darwin-user
default-configs/ppc-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..6273df2
@@ -0,0 +1 @@
+# Default configuration for ppc-linux-user
default-configs/ppc-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..ba80ba2
@@ -0,0 +1 @@
+# Default configuration for ppc-softmmu
default-configs/ppc64-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..422d3fb
@@ -0,0 +1 @@
+# Default configuration for ppc64-linux-user
default-configs/ppc64-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..0b72c70
@@ -0,0 +1 @@
+# Default configuration for ppc64-softmmu
default-configs/ppc64abi32-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..1c657ec
@@ -0,0 +1 @@
+# Default configuration for ppc64abi32-linux-user
default-configs/ppcemb-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..951bfa0
@@ -0,0 +1 @@
+# Default configuration for ppcemb-softmmu
default-configs/sh4-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..a469e19
@@ -0,0 +1 @@
+# Default configuration for sh4-linux-user
default-configs/sh4-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..4466835
@@ -0,0 +1 @@
+# Default configuration for sh4-softmmu
default-configs/sh4eb-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..be08ca1
@@ -0,0 +1 @@
+# Default configuration for sh4eb-linux-user
default-configs/sh4eb-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..2f60e53
@@ -0,0 +1 @@
+# Default configuration for sh4eb-softmmu
default-configs/sparc-bsd-user.mak new file +1 -0
new file mode 100644
index 0000000..21e0950
@@ -0,0 +1 @@
+# Default configuration for sparc-bsd-user
default-configs/sparc-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..9c716d1
@@ -0,0 +1 @@
+# Default configuration for sparc-linux-user
default-configs/sparc-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..2e0e621
@@ -0,0 +1 @@
+# Default configuration for sparc-softmmu
default-configs/sparc32plus-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..432e880
@@ -0,0 +1 @@
+# Default configuration for sparc32plus-linux-user
default-configs/sparc64-bsd-user.mak new file +1 -0
new file mode 100644
index 0000000..b8b9eea
@@ -0,0 +1 @@
+# Default configuration for sparc64-bsd-user
default-configs/sparc64-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..bf1bdd6
@@ -0,0 +1 @@
+# Default configuration for sparc64-linux-user
default-configs/sparc64-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..fead2ea
@@ -0,0 +1 @@
+# Default configuration for sparc64-softmmu
default-configs/x86_64-bsd-user.mak new file +1 -0
new file mode 100644
index 0000000..73e5d34
@@ -0,0 +1 @@
+# Default configuration for x86_64-bsd-user
default-configs/x86_64-linux-user.mak new file +1 -0
new file mode 100644
index 0000000..bec1d9e
@@ -0,0 +1 @@
+# Default configuration for x86_64-linux-user
default-configs/x86_64-softmmu.mak new file +1 -0
new file mode 100644
index 0000000..ec98af2
@@ -0,0 +1 @@
+# Default configuration for x86_64-softmmu
Signature · 1 line
1.6.2.5
#7 lore raw

PATCH v3 7/30 Generate gdbstub-xml.c only when needed

In reply to Juan Quintela

First user of new config-devices.mak

---
 Makefile.target                           |   14 ++++++--------
 configure                                 |    2 +-
 default-configs/arm-linux-user.mak        |    2 ++
 default-configs/arm-softmmu.mak           |    2 ++
 default-configs/armeb-linux-user.mak      |    2 ++
 default-configs/m68k-linux-user.mak       |    4 +++-
 default-configs/m68k-softmmu.mak          |    2 ++
 default-configs/ppc-darwin-user.mak       |    2 ++
 default-configs/ppc-linux-user.mak        |    2 ++
 default-configs/ppc-softmmu.mak           |    2 ++
 default-configs/ppc64-linux-user.mak      |    2 ++
 default-configs/ppc64-softmmu.mak         |    2 ++
 default-configs/ppc64abi32-linux-user.mak |    2 ++
 default-configs/ppcemb-softmmu.mak        |    2 ++
 default-configs/sh4-softmmu.mak           |    1 +
 15 files changed, 33 insertions(+), 10 deletions(-)
Makefile.target +6 -8
index 4ce6a3d..c4b8f5d 100644
@@ -88,7 +88,7 @@ VPATH+=:$(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
 QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
 
 obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
-      elfload.o linuxload.o uaccess.o gdbstub.o gdbstub-xml.o
+      elfload.o linuxload.o uaccess.o gdbstub.o
 
 obj-$(TARGET_HAS_BFLT) += flatload.o
 obj-$(TARGET_HAS_ELFLOAD32) += elfload32.o
@@ -121,7 +121,7 @@ LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
 LIBS+=-lmx
 
 obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
-        gdbstub.o gdbstub-xml.o
+        gdbstub.o
 
 obj-i386-y += ioport-user.o
 
@@ -138,7 +138,7 @@ VPATH+=:$(SRC_PATH)/bsd-user
 QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
 
 obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
-        gdbstub.o gdbstub-xml.o uaccess.o
+        gdbstub.o uaccess.o
 
 obj-i386-y += ioport-user.o
 
@@ -151,7 +151,7 @@ endif #CONFIG_BSD_USER
 ifdef CONFIG_SOFTMMU
 
 obj-y = vl.o monitor.o pci.o loader.o isa_mmio.o machine.o \
-        gdbstub.o gdbstub-xml.o msix.o ioport.o qemu-config.o
+        gdbstub.o msix.o ioport.o qemu-config.o
 # virtio has to be here due to weird dependency between PCI and virtio-net.
 # need to fix this properly
 obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o virtio-pci.o
@@ -298,16 +298,14 @@ ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)
 
 endif # CONFIG_SOFTMMU
 
+obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
+
 $(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) $(ARLIBS)
 	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
 
 
 gdbstub-xml.c: $(TARGET_XML_FILES) feature_to_c.sh
-ifeq ($(TARGET_XML_FILES),)
-	$(call quiet-command,rm -f $@ && echo > $@,"  GEN   $(TARGET_DIR)$@")
-else
 	$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES),"  GEN   $(TARGET_DIR)$@")
-endif
 
 qemu-options.h: $(SRC_PATH)/qemu-options.hx
 	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")
configure +1 -1
index 27822f9..8de7143 100755
@@ -2007,8 +2007,8 @@ if test ! -z "$gdb_xml_files" ; then
   for x in $gdb_xml_files; do
     list="$list $source_path/gdb-xml/$x"
   done
+  echo "TARGET_XML_FILES=$list" >> $config_target_mak
 fi
-echo "TARGET_XML_FILES=$list" >> $config_target_mak
 
 case "$target_arch2" in
   arm|armeb|m68k|microblaze|mips|mipsel|mipsn32|mipsn32el|mips64|mips64el|ppc|ppc64|ppc64abi32|ppcemb|sparc|sparc64|sparc32plus)
default-configs/arm-linux-user.mak +2 -0
index 413361a..46d4aa2 100644
@@ -1 +1,3 @@
 # Default configuration for arm-linux-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/arm-softmmu.mak +2 -0
index 372a549..2786138 100644
@@ -1 +1,3 @@
 # Default configuration for arm-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/armeb-linux-user.mak +2 -0
index bf2ffe7..41d0cc4 100644
@@ -1 +1,3 @@
 # Default configuration for armeb-linux-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/m68k-linux-user.mak +3 -1
index 06cd5ed..58f3eab 100644
@@ -1 +1,3 @@
-# Default configuration for m68k-linux-user
+# Default configuration for x86_64-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/m68k-softmmu.mak +2 -0
index 572b868..0faeb2c 100644
@@ -1 +1,3 @@
 # Default configuration for m68k-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc-darwin-user.mak +2 -0
index 117f176..153ed12 100644
@@ -1 +1,3 @@
 # Default configuration for ppc-darwin-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc-linux-user.mak +2 -0
index 6273df2..681a945 100644
@@ -1 +1,3 @@
 # Default configuration for ppc-linux-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc-softmmu.mak +2 -0
index ba80ba2..d28171b 100644
@@ -1 +1,3 @@
 # Default configuration for ppc-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc64-linux-user.mak +2 -0
index 422d3fb..089c08f 100644
@@ -1 +1,3 @@
 # Default configuration for ppc64-linux-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc64-softmmu.mak +2 -0
index 0b72c70..fe66524 100644
@@ -1 +1,3 @@
 # Default configuration for ppc64-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppc64abi32-linux-user.mak +2 -0
index 1c657ec..f038ffd 100644
@@ -1 +1,3 @@
 # Default configuration for ppc64abi32-linux-user
+
+CONFIG_GDBSTUB_XML=y
default-configs/ppcemb-softmmu.mak +2 -0
index 951bfa0..bff13e6 100644
@@ -1 +1,3 @@
 # Default configuration for ppcemb-softmmu
+
+CONFIG_GDBSTUB_XML=y
default-configs/sh4-softmmu.mak +1 -0
index 4466835..303fdbe 100644
@@ -1 +1,2 @@
 # Default configuration for sh4-softmmu
+
Signature · 1 line
1.6.2.5
#8 lore raw

PATCH v3 8/30 Only compile usb_ohci when one target uses it

In reply to Juan Quintela
---
 Makefile.target                    |    2 +-
 default-configs/arm-softmmu.mak    |    1 +
 default-configs/ppc-softmmu.mak    |    1 +
 default-configs/ppc64-softmmu.mak  |    1 +
 default-configs/ppcemb-softmmu.mak |    1 +
 default-configs/sh4-softmmu.mak    |    1 +
 default-configs/sh4eb-softmmu.mak  |    2 ++
 7 files changed, 8 insertions(+), 1 deletions(-)
Makefile.target +1 -1
index c4b8f5d..f7b3d9a 100644
@@ -176,7 +176,7 @@ QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
 obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o
 
 # USB layer
-obj-y += usb-ohci.o
+obj-$(CONFIG_USB_OHCI) += usb-ohci.o
 
 # PCI network cards
 obj-y += eepro100.o
default-configs/arm-softmmu.mak +1 -0
index 2786138..15e4373 100644
@@ -1,3 +1,4 @@
 # Default configuration for arm-softmmu
 
 CONFIG_GDBSTUB_XML=y
+CONFIG_USB_OHCI=y
default-configs/ppc-softmmu.mak +1 -0
index d28171b..cc4b83a 100644
@@ -1,3 +1,4 @@
 # Default configuration for ppc-softmmu
 
 CONFIG_GDBSTUB_XML=y
+CONFIG_USB_OHCI=y
default-configs/ppc64-softmmu.mak +1 -0
index fe66524..a4d08ff 100644
@@ -1,3 +1,4 @@
 # Default configuration for ppc64-softmmu
 
 CONFIG_GDBSTUB_XML=y
+CONFIG_USB_OHCI=y
default-configs/ppcemb-softmmu.mak +1 -0
index bff13e6..19ea261 100644
@@ -1,3 +1,4 @@
 # Default configuration for ppcemb-softmmu
 
 CONFIG_GDBSTUB_XML=y
+CONFIG_USB_OHCI=y
default-configs/sh4-softmmu.mak +1 -0
index 303fdbe..9c2445b 100644
@@ -1,2 +1,3 @@
 # Default configuration for sh4-softmmu
 
+CONFIG_USB_OHCI=y
default-configs/sh4eb-softmmu.mak +2 -0
index 2f60e53..fa54f10 100644
@@ -1 +1,3 @@
 # Default configuration for sh4eb-softmmu
+
+CONFIG_USB_OHCI=y
Signature · 1 line
1.6.2.5
#9 lore raw

PATCH v3 9/30 Only compile isa_mmio when one target uses it

In reply to Juan Quintela
---
 Makefile.target                      |    4 ++--
 default-configs/arm-softmmu.mak      |    1 +
 default-configs/mips-softmmu.mak     |    2 ++
 default-configs/mips64-softmmu.mak   |    2 ++
 default-configs/mips64el-softmmu.mak |    2 ++
 default-configs/mipsel-softmmu.mak   |    2 ++
 default-configs/ppc-softmmu.mak      |    1 +
 default-configs/ppc64-softmmu.mak    |    1 +
 default-configs/ppcemb-softmmu.mak   |    1 +
 default-configs/sparc64-softmmu.mak  |    2 ++
 10 files changed, 16 insertions(+), 2 deletions(-)
Makefile.target +2 -2
index f7b3d9a..29d5977 100644
@@ -150,13 +150,13 @@ endif #CONFIG_BSD_USER
 # System emulator target
 ifdef CONFIG_SOFTMMU
 
-obj-y = vl.o monitor.o pci.o loader.o isa_mmio.o machine.o \
+obj-y = vl.o monitor.o pci.o loader.o machine.o \
         gdbstub.o msix.o ioport.o qemu-config.o
 # virtio has to be here due to weird dependency between PCI and virtio-net.
 # need to fix this properly
 obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o virtio-pci.o
 obj-$(CONFIG_KVM) += kvm.o kvm-all.o
-
+obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
 LIBS+=-lz
 
 sound-obj-y =
default-configs/arm-softmmu.mak +1 -0
index 15e4373..66834c2 100644
@@ -2,3 +2,4 @@
 
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
+CONFIG_ISA_MMIO=y
default-configs/mips-softmmu.mak +2 -0
index a9e89ec..0b5bb0d 100644
@@ -1 +1,3 @@
 # Default configuration for mips-softmmu
+
+CONFIG_ISA_MMIO=y
default-configs/mips64-softmmu.mak +2 -0
index 4211452..de64165 100644
@@ -1 +1,3 @@
 # Default configuration for mips64-softmmu
+
+CONFIG_ISA_MMIO=y
default-configs/mips64el-softmmu.mak +2 -0
index 8ca46a2..eb1bdc3 100644
@@ -1 +1,3 @@
 # Default configuration for mips64el-softmmu
+
+CONFIG_ISA_MMIO=y
default-configs/mipsel-softmmu.mak +2 -0
index fe8af41..6ace424 100644
@@ -1 +1,3 @@
 # Default configuration for mipsel-softmmu
+
+CONFIG_ISA_MMIO=y
default-configs/ppc-softmmu.mak +1 -0
index cc4b83a..93172b8 100644
@@ -2,3 +2,4 @@
 
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
+CONFIG_ISA_MMIO=y
default-configs/ppc64-softmmu.mak +1 -0
index a4d08ff..05eb3b6 100644
@@ -2,3 +2,4 @@
 
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
+CONFIG_ISA_MMIO=y
default-configs/ppcemb-softmmu.mak +1 -0
index 19ea261..4259fcf 100644
@@ -2,3 +2,4 @@
 
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
+CONFIG_ISA_MMIO=y
default-configs/sparc64-softmmu.mak +2 -0
index fead2ea..aaccf0b 100644
@@ -1 +1,3 @@
 # Default configuration for sparc64-softmmu
+
+CONFIG_ISA_MMIO=y
Signature · 1 line
1.6.2.5
#10 lore raw

PATCH v3 10/30 Only compile qdev_addr when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                       |    3 ++-
 default-configs/sparc-softmmu.mak |    2 ++
 2 files changed, 4 insertions(+), 1 deletions(-)
Makefile.hw +2 -1
index b48d1af..7f3a56a 100644
@@ -22,7 +22,8 @@ obj-y += m48t59.o escc.o
 # SCSI layer
 obj-y += lsi53c895a.o esp.o
 
-obj-y += dma-helpers.o sysbus.o qdev-addr.o
+obj-y += dma-helpers.o sysbus.o
+obj-$(CONFIG_QDEV_ADDR) += qdev-addr.o
 
 all: $(HWLIB)
 # Dummy command so that make thinks it has done something
default-configs/sparc-softmmu.mak +2 -0
index 2e0e621..dc51839 100644
@@ -1 +1,3 @@
 # Default configuration for sparc-softmmu
+
+CONFIG_QDEV_ADDR=y
Signature · 1 line
1.6.2.5
#11 lore raw

PATCH v3 11/30 Only compile nand when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                      |    3 ++-
 default-configs/arm-softmmu.mak  |    1 +
 default-configs/cris-softmmu.mak |    2 ++
 3 files changed, 5 insertions(+), 1 deletions(-)
Makefile.hw +2 -1
index 7f3a56a..cd035b3 100644
@@ -15,7 +15,8 @@ obj-y =
 obj-y += virtio.o
 obj-y += fw_cfg.o
 obj-y += watchdog.o
-obj-y += nand.o ecc.o
+obj-y += ecc.o
+obj-$(CONFIG_NAND) += nand.o
 
 obj-y += m48t59.o escc.o
 
default-configs/arm-softmmu.mak +1 -0
index 66834c2..c15ac7f 100644
@@ -3,3 +3,4 @@
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
+CONFIG_NAND=y
default-configs/cris-softmmu.mak +2 -0
index 3726699..c429979 100644
@@ -1 +1,3 @@
 # Default configuration for cris-softmmu
+
+CONFIG_NAND=y
Signature · 1 line
1.6.2.5
#12 lore raw

PATCH v3 12/30 Only compile ecc when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                       |    2 +-
 default-configs/arm-softmmu.mak   |    1 +
 default-configs/sparc-softmmu.mak |    1 +
 3 files changed, 3 insertions(+), 1 deletions(-)
Makefile.hw +1 -1
index cd035b3..402c26d 100644
@@ -15,7 +15,7 @@ obj-y =
 obj-y += virtio.o
 obj-y += fw_cfg.o
 obj-y += watchdog.o
-obj-y += ecc.o
+obj-$(CONFIG_ECC) += ecc.o
 obj-$(CONFIG_NAND) += nand.o
 
 obj-y += m48t59.o escc.o
default-configs/arm-softmmu.mak +1 -0
index c15ac7f..9ac6f31 100644
@@ -4,3 +4,4 @@ CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
 CONFIG_NAND=y
+CONFIG_ECC=y
default-configs/sparc-softmmu.mak +1 -0
index dc51839..25abbd9 100644
@@ -1,3 +1,4 @@
 # Default configuration for sparc-softmmu
 
 CONFIG_QDEV_ADDR=y
+CONFIG_ECC=y
Signature · 1 line
1.6.2.5
#13 lore raw

PATCH v3 13/30 Only compile esp when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                          |    3 ++-
 default-configs/mips-softmmu.mak     |    1 +
 default-configs/mips64-softmmu.mak   |    1 +
 default-configs/mips64el-softmmu.mak |    1 +
 default-configs/mipsel-softmmu.mak   |    1 +
 default-configs/sparc64-softmmu.mak  |    1 +
 6 files changed, 7 insertions(+), 1 deletions(-)
Makefile.hw +2 -1
index 402c26d..af0704f 100644
@@ -21,7 +21,8 @@ obj-$(CONFIG_NAND) += nand.o
 obj-y += m48t59.o escc.o
 
 # SCSI layer
-obj-y += lsi53c895a.o esp.o
+obj-y += lsi53c895a.o
+obj-$(CONFIG_ESP) += esp.o
 
 obj-y += dma-helpers.o sysbus.o
 obj-$(CONFIG_QDEV_ADDR) += qdev-addr.o
default-configs/mips-softmmu.mak +1 -0
index 0b5bb0d..b452b9a 100644
@@ -1,3 +1,4 @@
 # Default configuration for mips-softmmu
 
 CONFIG_ISA_MMIO=y
+CONFIG_ESP=y
default-configs/mips64-softmmu.mak +1 -0
index de64165..2896675 100644
@@ -1,3 +1,4 @@
 # Default configuration for mips64-softmmu
 
 CONFIG_ISA_MMIO=y
+CONFIG_ESP=y
default-configs/mips64el-softmmu.mak +1 -0
index eb1bdc3..7fbd9a3 100644
@@ -1,3 +1,4 @@
 # Default configuration for mips64el-softmmu
 
 CONFIG_ISA_MMIO=y
+CONFIG_ESP=y
default-configs/mipsel-softmmu.mak +1 -0
index 6ace424..9e02e93 100644
@@ -1,3 +1,4 @@
 # Default configuration for mipsel-softmmu
 
 CONFIG_ISA_MMIO=y
+CONFIG_ESP=y
default-configs/sparc64-softmmu.mak +1 -0
index aaccf0b..251f723 100644
@@ -1,3 +1,4 @@
 # Default configuration for sparc64-softmmu
 
 CONFIG_ISA_MMIO=y
+CONFIG_ESP=y
Signature · 1 line
1.6.2.5
#14 lore raw

PATCH v3 14/30 Only compile escc when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                        |    3 ++-
 default-configs/ppc-softmmu.mak    |    1 +
 default-configs/ppc64-softmmu.mak  |    1 +
 default-configs/ppcemb-softmmu.mak |    1 +
 default-configs/sparc-softmmu.mak  |    1 +
 5 files changed, 6 insertions(+), 1 deletions(-)
Makefile.hw +2 -1
index af0704f..231dfc3 100644
@@ -18,7 +18,8 @@ obj-y += watchdog.o
 obj-$(CONFIG_ECC) += ecc.o
 obj-$(CONFIG_NAND) += nand.o
 
-obj-y += m48t59.o escc.o
+obj-y += m48t59.o
+obj-$(CONFIG_ESCC) += escc.o
 
 # SCSI layer
 obj-y += lsi53c895a.o
default-configs/ppc-softmmu.mak +1 -0
index 93172b8..783b066 100644
@@ -3,3 +3,4 @@
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
+CONFIG_ESCC=y
default-configs/ppc64-softmmu.mak +1 -0
index 05eb3b6..e04d2c5 100644
@@ -3,3 +3,4 @@
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
+CONFIG_ESCC=y
default-configs/ppcemb-softmmu.mak +1 -0
index 4259fcf..9b1ac09 100644
@@ -3,3 +3,4 @@
 CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
+CONFIG_ESCC=y
default-configs/sparc-softmmu.mak +1 -0
index 25abbd9..853d6bb 100644
@@ -2,3 +2,4 @@
 
 CONFIG_QDEV_ADDR=y
 CONFIG_ECC=y
+CONFIG_ESCC=y
Signature · 1 line
1.6.2.5
#15 lore raw

PATCH v3 15/30 Only compile m48t59 when one target uses it

In reply to Juan Quintela
---
 Makefile.hw                         |    2 +-
 default-configs/ppc-softmmu.mak     |    1 +
 default-configs/ppc64-softmmu.mak   |    1 +
 default-configs/ppcemb-softmmu.mak  |    1 +
 default-configs/sparc-softmmu.mak   |    1 +
 default-configs/sparc64-softmmu.mak |    1 +
 6 files changed, 6 insertions(+), 1 deletions(-)
Makefile.hw +1 -1
index 231dfc3..dbdcbd2 100644
@@ -18,7 +18,7 @@ obj-y += watchdog.o
 obj-$(CONFIG_ECC) += ecc.o
 obj-$(CONFIG_NAND) += nand.o
 
-obj-y += m48t59.o
+obj-$(CONFIG_M48T59) += m48t59.o
 obj-$(CONFIG_ESCC) += escc.o
 
 # SCSI layer
default-configs/ppc-softmmu.mak +1 -0
index 783b066..17dc12f 100644
@@ -4,3 +4,4 @@ CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
 CONFIG_ESCC=y
+CONFIG_M48T59=y
default-configs/ppc64-softmmu.mak +1 -0
index e04d2c5..d56f5c2 100644
@@ -4,3 +4,4 @@ CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
 CONFIG_ESCC=y
+CONFIG_M48T59=y
default-configs/ppcemb-softmmu.mak +1 -0
index 9b1ac09..cb460c1 100644
@@ -4,3 +4,4 @@ CONFIG_GDBSTUB_XML=y
 CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
 CONFIG_ESCC=y
+CONFIG_M48T59=y
default-configs/sparc-softmmu.mak +1 -0
index 853d6bb..0bc6ff3 100644
@@ -3,3 +3,4 @@
 CONFIG_QDEV_ADDR=y
 CONFIG_ECC=y
 CONFIG_ESCC=y
+CONFIG_M48T59=y
default-configs/sparc64-softmmu.mak +1 -0
index 251f723..06529cd 100644
@@ -2,3 +2,4 @@
 
 CONFIG_ISA_MMIO=y
 CONFIG_ESP=y
+CONFIG_M48T59=y
Signature · 1 line
1.6.2.5
#16 lore raw

PATCH v3 16/30 Only compile ptimer when one target uses it

In reply to Juan Quintela
---
 Makefile                            |    3 ++-
 default-configs/arm-softmmu.mak     |    1 +
 default-configs/sparc-softmmu.mak   |    1 +
 default-configs/sparc64-softmmu.mak |    1 +
 4 files changed, 5 insertions(+), 1 deletions(-)
Makefile +2 -1
index acca106..44b88c6 100644
@@ -82,7 +82,8 @@ block-obj-y +=  $(addprefix block/, $(block-nested-y))
 obj-y = $(block-obj-y)
 obj-y += readline.o console.o host-utils.o
 
-obj-y += irq.o ptimer.o
+obj-y += irq.o
+obj-$(CONFIG_PTIMER) += ptimer.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
 obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
default-configs/arm-softmmu.mak +1 -0
index 9ac6f31..05b4b14 100644
@@ -5,3 +5,4 @@ CONFIG_USB_OHCI=y
 CONFIG_ISA_MMIO=y
 CONFIG_NAND=y
 CONFIG_ECC=y
+CONFIG_PTIMER=y
default-configs/sparc-softmmu.mak +1 -0
index 0bc6ff3..ce21256 100644
@@ -4,3 +4,4 @@ CONFIG_QDEV_ADDR=y
 CONFIG_ECC=y
 CONFIG_ESCC=y
 CONFIG_M48T59=y
+CONFIG_PTIMER=y
default-configs/sparc64-softmmu.mak +1 -0
index 06529cd..232140f 100644
@@ -3,3 +3,4 @@
 CONFIG_ISA_MMIO=y
 CONFIG_ESP=y
 CONFIG_M48T59=y
+CONFIG_PTIMER=y
Signature · 1 line
1.6.2.5
#17 lore raw

PATCH v3 17/30 Only compile sd when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 44b88c6..3e32220 100644
@@ -91,7 +91,8 @@ obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
 obj-y += usb-serial.o usb-net.o
-obj-y += sd.o ssi-sd.o
+obj-y += ssi-sd.o
+obj-$(CONFIG_SD) += sd.o
 obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
 obj-y += bt-hci-csr.o
 obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
default-configs/arm-softmmu.mak +1 -0
index 05b4b14..52b2dfa 100644
@@ -6,3 +6,4 @@ CONFIG_ISA_MMIO=y
 CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_PTIMER=y
+CONFIG_SD=y
Signature · 1 line
1.6.2.5
#18 lore raw

PATCH v3 18/30 Only compile max7310 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 3e32220..04434b1 100644
@@ -84,7 +84,8 @@ obj-y += readline.o console.o host-utils.o
 
 obj-y += irq.o
 obj-$(CONFIG_PTIMER) += ptimer.o
-obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
+obj-$(CONFIG_MAX7310) += max7310.o
+obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o wm8750.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
 obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
 obj-y += scsi-disk.o cdrom.o
default-configs/arm-softmmu.mak +1 -0
index 52b2dfa..88232c7 100644
@@ -7,3 +7,4 @@ CONFIG_NAND=y
 CONFIG_ECC=y
 CONFIG_PTIMER=y
 CONFIG_SD=y
+CONFIG_MAX7310=y
Signature · 1 line
1.6.2.5
#19 lore raw

PATCH v3 19/30 Only compile wm8750 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 04434b1..68c604b 100644
@@ -85,7 +85,8 @@ obj-y += readline.o console.o host-utils.o
 obj-y += irq.o
 obj-$(CONFIG_PTIMER) += ptimer.o
 obj-$(CONFIG_MAX7310) += max7310.o
-obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o wm8750.o
+obj-$(CONFIG_WM8750) += wm8750.o
+obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
 obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
 obj-y += scsi-disk.o cdrom.o
default-configs/arm-softmmu.mak +1 -0
index 88232c7..6149b97 100644
@@ -8,3 +8,4 @@ CONFIG_ECC=y
 CONFIG_PTIMER=y
 CONFIG_SD=y
 CONFIG_MAX7310=y
+CONFIG_WM8750=y
Signature · 1 line
1.6.2.5
#20 lore raw

PATCH v3 20/30 Only compile twl92230 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 68c604b..c7d6d13 100644
@@ -86,8 +86,9 @@ obj-y += irq.o
 obj-$(CONFIG_PTIMER) += ptimer.o
 obj-$(CONFIG_MAX7310) += max7310.o
 obj-$(CONFIG_WM8750) += wm8750.o
+obj-$(CONFIG_TWL92230) += twl92230.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
+obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
 obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index 6149b97..d439509 100644
@@ -9,3 +9,4 @@ CONFIG_PTIMER=y
 CONFIG_SD=y
 CONFIG_MAX7310=y
 CONFIG_WM8750=y
+CONFIG_TWL92230=y
Signature · 1 line
1.6.2.5
#21 lore raw

PATCH v3 21/30 Only compile tsc2005 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index c7d6d13..a1669ba 100644
@@ -87,9 +87,10 @@ obj-$(CONFIG_PTIMER) += ptimer.o
 obj-$(CONFIG_MAX7310) += max7310.o
 obj-$(CONFIG_WM8750) += wm8750.o
 obj-$(CONFIG_TWL92230) += twl92230.o
+obj-$(CONFIG_TSC2005) += tsc2005.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
-obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
+obj-y += tmp105.o lm832x.o eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
default-configs/arm-softmmu.mak +1 -0
index d439509..740c3a8 100644
@@ -10,3 +10,4 @@ CONFIG_SD=y
 CONFIG_MAX7310=y
 CONFIG_WM8750=y
 CONFIG_TWL92230=y
+CONFIG_TSC2005=y
Signature · 1 line
1.6.2.5
#22 lore raw

PATCH v3 22/30 Only compile lm832x when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index a1669ba..6ddaa1a 100644
@@ -88,9 +88,10 @@ obj-$(CONFIG_MAX7310) += max7310.o
 obj-$(CONFIG_WM8750) += wm8750.o
 obj-$(CONFIG_TWL92230) += twl92230.o
 obj-$(CONFIG_TSC2005) += tsc2005.o
+obj-$(CONFIG_LM832X) += lm832x.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
-obj-y += tmp105.o lm832x.o eeprom93xx.o
+obj-y += tmp105.o eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
default-configs/arm-softmmu.mak +1 -0
index 740c3a8..d1e3924 100644
@@ -11,3 +11,4 @@ CONFIG_MAX7310=y
 CONFIG_WM8750=y
 CONFIG_TWL92230=y
 CONFIG_TSC2005=y
+CONFIG_LM832X=y
Signature · 1 line
1.6.2.5
#23 lore raw

PATCH v3 23/30 Only compile tmp105 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 6ddaa1a..4c57e58 100644
@@ -89,9 +89,10 @@ obj-$(CONFIG_WM8750) += wm8750.o
 obj-$(CONFIG_TWL92230) += twl92230.o
 obj-$(CONFIG_TSC2005) += tsc2005.o
 obj-$(CONFIG_LM832X) += lm832x.o
+obj-$(CONFIG_TMP105) += tmp105.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
 obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
-obj-y += tmp105.o eeprom93xx.o
+obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
default-configs/arm-softmmu.mak +1 -0
index d1e3924..6cbd8a3 100644
@@ -12,3 +12,4 @@ CONFIG_WM8750=y
 CONFIG_TWL92230=y
 CONFIG_TSC2005=y
 CONFIG_LM832X=y
+CONFIG_TMP105=y
Signature · 1 line
1.6.2.5
#24 lore raw

PATCH v3 24/30 Only compile stellaris_input when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 4c57e58..71a17c8 100644
@@ -90,8 +90,9 @@ obj-$(CONFIG_TWL92230) += twl92230.o
 obj-$(CONFIG_TSC2005) += tsc2005.o
 obj-$(CONFIG_LM832X) += lm832x.o
 obj-$(CONFIG_TMP105) += tmp105.o
+obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o
+obj-y += ssd0303.o ssd0323.o ads7846.o
 obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index 6cbd8a3..dddc2a6 100644
@@ -13,3 +13,4 @@ CONFIG_TWL92230=y
 CONFIG_TSC2005=y
 CONFIG_LM832X=y
 CONFIG_TMP105=y
+CONFIG_STELLARIS_INPUT=y
Signature · 1 line
1.6.2.5
#25 lore raw

PATCH v3 25/30 Only compile sd0303 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 71a17c8..0b01725 100644
@@ -91,8 +91,9 @@ obj-$(CONFIG_TSC2005) += tsc2005.o
 obj-$(CONFIG_LM832X) += lm832x.o
 obj-$(CONFIG_TMP105) += tmp105.o
 obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
+obj-$(CONFIG_SSD0303) += ssd0303.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ssd0303.o ssd0323.o ads7846.o
+obj-y += ssd0323.o ads7846.o
 obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index dddc2a6..aed1ea3 100644
@@ -14,3 +14,4 @@ CONFIG_TSC2005=y
 CONFIG_LM832X=y
 CONFIG_TMP105=y
 CONFIG_STELLARIS_INPUT=y
+CONFIG_SD0303=y
Signature · 1 line
1.6.2.5
#26 lore raw

PATCH v3 26/30 Only compile sd0323 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 0b01725..5832860 100644
@@ -92,8 +92,9 @@ obj-$(CONFIG_LM832X) += lm832x.o
 obj-$(CONFIG_TMP105) += tmp105.o
 obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 obj-$(CONFIG_SSD0303) += ssd0303.o
+obj-$(CONFIG_SSD0323) += ssd0323.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ssd0323.o ads7846.o
+obj-y += ads7846.o
 obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index aed1ea3..1d069b1 100644
@@ -15,3 +15,4 @@ CONFIG_LM832X=y
 CONFIG_TMP105=y
 CONFIG_STELLARIS_INPUT=y
 CONFIG_SD0303=y
+CONFIG_SD0323=y
Signature · 1 line
1.6.2.5
#27 lore raw

PATCH v3 27/30 Only compile ads7846 when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    2 +-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)
Makefile +1 -1
index 5832860..e16282b 100644
@@ -93,8 +93,8 @@ obj-$(CONFIG_TMP105) += tmp105.o
 obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 obj-$(CONFIG_SSD0303) += ssd0303.o
 obj-$(CONFIG_SSD0323) += ssd0323.o
+obj-$(CONFIG_ADS7846) += ads7846.o
 obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
-obj-y += ads7846.o
 obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index 1d069b1..f68273d 100644
@@ -16,3 +16,4 @@ CONFIG_TMP105=y
 CONFIG_STELLARIS_INPUT=y
 CONFIG_SD0303=y
 CONFIG_SD0323=y
+CONFIG_ADS7846=y
Signature · 1 line
1.6.2.5
#28 lore raw

PATCH v3 28/30 Only compile max111x when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index e16282b..89e217f 100644
@@ -94,7 +94,8 @@ obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 obj-$(CONFIG_SSD0303) += ssd0303.o
 obj-$(CONFIG_SSD0323) += ssd0323.o
 obj-$(CONFIG_ADS7846) += ads7846.o
-obj-y += i2c.o smbus.o smbus_eeprom.o max111x.o
+obj-$(CONFIG_MAX111X) += max111x.o
+obj-y += i2c.o smbus.o smbus_eeprom.o
 obj-y += eeprom93xx.o
 obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
default-configs/arm-softmmu.mak +1 -0
index f68273d..486409d 100644
@@ -17,3 +17,4 @@ CONFIG_STELLARIS_INPUT=y
 CONFIG_SD0303=y
 CONFIG_SD0323=y
 CONFIG_ADS7846=y
+CONFIG_MAX111X=y
Signature · 1 line
1.6.2.5
#29 lore raw

PATCH v3 29/30 Only compile ssi-sd when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    2 +-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 2 insertions(+), 1 deletions(-)
Makefile +1 -1
index 89e217f..9ee6d92 100644
@@ -101,7 +101,7 @@ obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
 obj-y += usb-serial.o usb-net.o
-obj-y += ssi-sd.o
+obj-$(CONFIG_SSI_SD) += ssi-sd.o
 obj-$(CONFIG_SD) += sd.o
 obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
 obj-y += bt-hci-csr.o
default-configs/arm-softmmu.mak +1 -0
index 486409d..615288e 100644
@@ -18,3 +18,4 @@ CONFIG_SD0303=y
 CONFIG_SD0323=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
+CONFIG_SSI_SD=y
Signature · 1 line
1.6.2.5
#30 lore raw

PATCH v3 30/30 Only compile ssi when one target uses it

In reply to Juan Quintela
---
 Makefile                        |    3 ++-
 default-configs/arm-softmmu.mak |    1 +
 2 files changed, 3 insertions(+), 1 deletions(-)
Makefile +2 -1
index 9ee6d92..5fdccd7 100644
@@ -101,6 +101,7 @@ obj-y += scsi-disk.o cdrom.o
 obj-y += scsi-generic.o
 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
 obj-y += usb-serial.o usb-net.o
+obj-$(CONFIG_SSI) += ssi.o
 obj-$(CONFIG_SSI_SD) += ssi-sd.o
 obj-$(CONFIG_SD) += sd.o
 obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
@@ -108,7 +109,7 @@ obj-y += bt-hci-csr.o
 obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
 obj-y += qemu-char.o aio.o net-checksum.o savevm.o
 obj-y += msmouse.o ps2.o
-obj-y += qdev.o qdev-properties.o ssi.o
+obj-y += qdev.o qdev-properties.o
 
 obj-$(CONFIG_BRLAPI) += baum.o
 obj-$(CONFIG_WIN32) += tap-win32.o
default-configs/arm-softmmu.mak +1 -0
index 615288e..a30393d 100644
@@ -18,4 +18,5 @@ CONFIG_SD0303=y
 CONFIG_SD0323=y
 CONFIG_ADS7846=y
 CONFIG_MAX111X=y
+CONFIG_SSI=y
 CONFIG_SSI_SD=y
Signature · 1 line
1.6.2.5