Add CM-T35 support
PATCH 4/5 angstrom-led-config: Add LED setup for the cm-t35 and bump PR.
In reply to Mike Rapoport--- recipes/angstrom/angstrom-led-config.bb | 2 +- recipes/angstrom/angstrom-led-config/cm-t35/leds | 2 ++ 2 files changed, 3 insertions(+), 1 deletions(-) create mode 100644 recipes/angstrom/angstrom-led-config/cm-t35/leds
recipes/angstrom/angstrom-led-config.bb +1 -1
@@ -1,7 +1,7 @@ DESCRIPTION = "Configuration files for runtime LED configuration" #PV = "${DISTRO_VERSION}" -PR = "r6" +PR = "r7" PACKAGE_ARCH = "${MACHINE_ARCH}" inherit update-rc.d
recipes/angstrom/angstrom-led-config/cm-t35/leds new file +2 -0
@@ -0,0 +1,2 @@ +#file format: name trigger +cm-t35:green heartbeat
Signature · 1 line
1.6.4.4
PATCH 3/5 cm-t35: add machine configuration
In reply to Mike Rapoport--- conf/machine/cm-t35.conf | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 46 insertions(+), 0 deletions(-) create mode 100644 conf/machine/cm-t35.conf
conf/machine/cm-t35.conf new file +46 -0
@@ -0,0 +1,46 @@ +#@TYPE: Machine +#@NAME: CM-T35 machine +#@DESCRIPTION: Machine configuration for the CompuLab CM-T35 board (http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm) + +TARGET_ARCH = "arm" + +PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg" +XSERVER = "xserver-xorg \ + xf86-input-evdev \ + xf86-input-mouse \ + xf86-input-evtouch \ + xf86-input-tslib \ + xf86-video-omapfb \ + xf86-input-keyboard" + +GUI_MACHINE_CLASS = "bigscreen" + +require conf/machine/include/omap3.inc + +IMAGE_FSTYPES += "tar.bz2 ubi" +EXTRA_IMAGECMD_jffs2 = "-lnp " + +# Guesswork +SERIAL_CONSOLE = "115200 ttyS2" + +UBOOT_MACHINE = "cm_t35_config" +PREFERRED_VERSION_u-boot = "git" + +# do ubiattach /dev/ubi_ctrl -m 4 +# From dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: logical eraseblock size: 126976 bytes +# from ubiattach stdout: +# UBI device number 0, total 4039 LEBs +MKUBIFS_ARGS = "-m 2048 -e 126976 -c 4039" + +# do ubiattach /dev/ubi_ctrl -m 4 +# from dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: physical eraseblock size: 131072 bytes (128 KiB) +# UBI: sub-page size: 512 +UBINIZE_ARGS = "-O 2048 -m 2048 -p 128KiB" + +MACHINE_EXTRA_RRECOMMENDS = "omap3-sgx-modules marvell-sdio-fw" +MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa wifi ext2" +
Signature · 1 line
1.6.4.4
cover Add CM-T35 support
This patch adds support for CM-T35 system-on-module based on OMAP3 SoC.
Mike Rapoport (5):
u-boot git: add cm-t35 support
linux-omap 2.6.32: add cm-t35 support
cm-t35: add machine configuration
angstrom-led-config: Add LED setup for the cm-t35 and bump PR.
xserver-xorg-conf: add cm-t35 support
conf/machine/cm-t35.conf | 46 + recipes/angstrom/angstrom-led-config.bb | 2 +- recipes/angstrom/angstrom-led-config/cm-t35/leds | 2 + .../0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch | 159 ++ ...do24m-ensure-chip-select-changes-between-.patch | 30 + ...002-omap3-cm-t35-add-DSS2-display-support.patch | 307 ++++ ...03-omap3-cm-t35-update-defconfig-for-DSS2.patch | 145 ++ .../0004-omap3-cm-t35-add-cm-t35-mux-configs.patch | 427 +++++ .../0006-omap3-cm-t35-update-defconfig.patch | 87 + recipes/linux/linux-omap-2.6.32/cm-t35/defconfig | 1823 ++++++++++++++++++++ recipes/linux/linux-omap_2.6.32.bb | 12 +- recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch | 1487 ++++++++++++++++ recipes/u-boot/u-boot_git.bb | 2 + .../xserver-xorg-conf/cm-t35/xorg.conf | 29 + recipes/xorg-xserver/xserver-xorg-conf_0.1.bb | 2 +- 15 files changed, 4557 insertions(+), 3 deletions(-) create mode 100644 conf/machine/cm-t35.conf create mode 100644 recipes/angstrom/angstrom-led-config/cm-t35/leds create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/defconfig create mode 100644 recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch create mode 100644 recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
PATCH 1/5 u-boot git: add cm-t35 support
--- recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch | 1487 +++++++++++++++++++++++++ recipes/u-boot/u-boot_git.bb | 2 + 2 files changed, 1489 insertions(+), 0 deletions(-) create mode 100644 recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch
recipes/u-boot/u-boot-git/cm-t35/cm-t35.patch new file +1487 -0
@@ -0,0 +1,1487 @@ +diff --git a/MAINTAINERS b/MAINTAINERS +index d70a9d2..94e45f4 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -677,6 +677,10 @@ Stelian Pop <[email protected]> + at91sam9263ek ARM926EJS (AT91SAM9263 SoC) + at91sam9rlek ARM926EJS (AT91SAM9RL SoC) + ++Mike Rapoport <[email protected]> ++ ++ cm_t35 ARM CORTEX-A8 (OMAP3xx SoC) ++ + Tom Rix <[email protected]> + + omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) +diff --git a/MAKEALL b/MAKEALL +index d63c5c2..e131c62 100755 +--- a/MAKEALL ++++ b/MAKEALL +@@ -612,6 +612,7 @@ LIST_ARM11=" \ + ## ARM Cortex-A8 Systems + ######################################################################### + LIST_ARM_CORTEX_A8=" \ ++ cm_t35 \ + devkit8000 \ + omap3_beagle \ + omap3_overo \ +diff --git a/Makefile b/Makefile +index bcb3fe9..9d6150a 100644 +--- a/Makefile ++++ b/Makefile +@@ -3143,6 +3143,8 @@ SMN42_config : unconfig + ######################################################################### + ## ARM CORTEX Systems + ######################################################################### ++cm_t35_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 cm_t35 NULL omap3 + + devkit8000_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 +diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile +new file mode 100644 +index 0000000..320a817 +--- /dev/null ++++ b/board/cm_t35/Makefile +@@ -0,0 +1,47 @@ ++# ++# (C) Copyright 2000, 2001, 2002 ++# Wolfgang Denk, DENX Software Engineering, [email protected]. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := cm_t35.o ++ ++SRCS := $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) ++ ++clean: ++ rm -f $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend +diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c +new file mode 100644 +index 0000000..a9bb86f +--- /dev/null ++++ b/board/cm_t35/cm_t35.c +@@ -0,0 +1,257 @@ ++/* ++ * (C) Copyright 2009 ++ * CompuLab, Ltd. <www.compulab.co.il> ++ * ++ * Authors : ++ * Igor Vaisbein <[email protected]> ++ * Mike Rapoport <[email protected]> ++ * ++ * Derived from omap3evm and Beagle Board by ++ * Manikandan Pillai <[email protected]> ++ * Richard Woodruff <[email protected]> ++ * Syed Mohammed Khasim <[email protected]> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <netdev.h> ++#include <net.h> ++#include <i2c.h> ++#include <twl4030.h> ++ ++#include <asm/io.h> ++#include <asm/setup.h> ++#include <asm/arch/mem.h> ++#include <asm/arch/mux.h> ++#include <asm/arch/sys_proto.h> ++#include <asm/mach-types.h> ++ ++#include "cm_t35.h" ++ ++static u32 gpmc_net_config[GPMC_MAX_REG] = { ++ NET_GPMC_CONFIG1, ++ NET_GPMC_CONFIG2, ++ NET_GPMC_CONFIG3, ++ NET_GPMC_CONFIG4, ++ NET_GPMC_CONFIG5, ++ NET_GPMC_CONFIG6, ++ 0 ++}; ++ ++static u32 gpmc_nand_config[GPMC_MAX_REG] = { ++ SMNAND_GPMC_CONFIG1, ++ SMNAND_GPMC_CONFIG2, ++ SMNAND_GPMC_CONFIG3, ++ SMNAND_GPMC_CONFIG4, ++ SMNAND_GPMC_CONFIG5, ++ SMNAND_GPMC_CONFIG6, ++ 0, ++}; ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ++ * Routine: board_init ++ * Description: Early hardware init. ++ */ ++int board_init(void) ++{ ++ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ ++ ++ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0], ++ CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M); ++ ++ /* board id for Linux */ ++ gd->bd->bi_arch_number = MACH_TYPE_CM_T35; ++ /* boot param addr */ ++ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); ++ ++ return 0; ++} ++ ++/* ++ * Routine: misc_init_r ++ * Description: init i2c and dieid ++ */ ++int misc_init_r(void) ++{ ++#ifdef CONFIG_DRIVER_OMAP34XX_I2C ++ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); ++#endif ++ ++ dieid_num_r(); ++ ++ return 0; ++} ++ ++/* ++ * Routine: set_muxconf_regs ++ * Description: Setting up the configuration Mux registers specific to the ++ * hardware. Many pins need to be moved from protect to primary ++ * mode. ++ */ ++void set_muxconf_regs(void) ++{ ++ MUX_CM_T35(); ++} ++ ++/* ++ * Routine: get_board_serial ++ * Description: read system serial number ++ */ ++void get_board_serial(struct tag_serialnr *serialnr) ++{ ++ u32 low, high; ++ int rc; ++ ++ memset(serialnr, 0, sizeof(*serialnr)); ++ ++ rc = i2c_read(0x50, 0x8, 1, &low, sizeof(low)); ++ if (rc) ++ return; ++ ++ rc = i2c_read(0x50, 0xc, 1, &high, sizeof(high)); ++ if (rc) ++ return; ++ ++ if (low != 0xffffffff && high != 0xffffffff) { ++ serialnr->low = low; ++ serialnr->high = high; ++ } ++}; ++ ++/* ++ * Routine: get_board_rev ++ * Description: read system revision ++ */ ++u32 get_board_rev(void) ++{ ++ u16 rev; ++ int rc; ++ ++ rc = i2c_read(0x50, 0x6, 1, &rev, sizeof(rev)); ++ if (rc) ++ return 0; ++ ++ return rev; ++}; ++ ++/* ++ * Routine: setup_net_chip_gmpc ++ * Description: Setting up the configuration GPMC registers specific to the ++ * Ethernet hardware. ++ */ ++static void setup_net_chip_gmpc(void) ++{ ++ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; ++ ++ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], ++ CM_T35_SMC911X_BASE, GPMC_SIZE_16M); ++ enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], ++ SB_T35_SMC911X_BASE, GPMC_SIZE_16M); ++ ++ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ ++ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); ++ ++ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ ++ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); ++ ++ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ ++ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, ++ &ctrl_base->gpmc_nadv_ale); ++} ++ ++#ifdef CONFIG_DRIVER_OMAP34XX_I2C ++/* ++ * Routine: reset_net_chip ++ * Description: reset the Ethernet controller via TPS65930 GPIO ++ */ ++static void reset_net_chip(void) ++{ ++ /* Set GPIO1 of TPS65930 as output */ ++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, ++ TWL4030_BASEADD_GPIO+0x03); ++ /* Send a pulse on the GPIO pin */ ++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, ++ TWL4030_BASEADD_GPIO+0x0C); ++ udelay(1); ++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, ++ TWL4030_BASEADD_GPIO+0x09); ++ udelay(1); ++ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, ++ TWL4030_BASEADD_GPIO+0x0C); ++} ++#else ++static inline void reset_net_chip(void) {} ++#endif ++ ++/* ++ * Routine: handle_mac_address ++ * Description: prepare MAC address for on-board Ethernet. ++ */ ++static int handle_mac_address(void) ++{ ++ unsigned char enetaddr[6]; ++ int rc; ++ ++ memset(enetaddr, 0, 6); ++ rc = eth_getenv_enetaddr("ethaddr", enetaddr); ++ if (rc) ++ return 0; ++ ++#ifdef CONFIG_DRIVER_OMAP34XX_I2C ++ rc = i2c_read(0x50, 0, 1, enetaddr, 6); ++ if (rc) ++ return rc; ++#endif ++ ++ if (!is_valid_ether_addr(enetaddr)) ++ return -1; ++ ++ return eth_setenv_enetaddr("ethaddr", enetaddr); ++} ++ ++/* ++ * Routine: board_eth_init ++ * Description: initialize module and base-board Ethernet chips ++ */ ++int board_eth_init(bd_t *bis) ++{ ++ int rc = 0, rc1 = 0; ++ ++#ifdef CONFIG_SMC911X ++ setup_net_chip_gmpc(); ++ reset_net_chip(); ++ ++ rc1 = handle_mac_address(); ++ if (rc1) ++ printf("CM-T35: No MAC address found\n"); ++ ++ rc1 = smc911x_initialize(0, CM_T35_SMC911X_BASE); ++ if (rc1 > 0) ++ rc++; ++ ++ rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE); ++ if (rc1 > 0) ++ rc++; ++#endif ++ ++ return rc; ++} +diff --git a/board/cm_t35/cm_t35.h b/board/cm_t35/cm_t35.h +new file mode 100644 +index 0000000..549422c +--- /dev/null ++++ b/board/cm_t35/cm_t35.h +@@ -0,0 +1,180 @@ ++/* ++ * (C) Copyright 2009 CompuLab, Ltd ++ * Authors: ++ * Igor Vaisbein <[email protected]> ++ * Mike Rapoport <[email protected]> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _CM_T35_H_ ++#define _CM_T35_H_ ++ ++const omap3_sysinfo sysinfo = { ++ DDR_DISCRETE, ++ "CM-T35 board", ++ "NAND", ++}; ++ ++/* static void setup_net_chip(void); */ ++ ++/* ++ * IEN - Input Enable ++ * IDIS - Input Disable ++ * PTD - Pull type Down ++ * PTU - Pull type Up ++ * DIS - Pull type selection is inactive ++ * EN - Pull type selection is active ++ * M0 - Mode 0 ++ * The commented string gives the final mux configuration for that pin ++ */ ++#define MUX_CM_T35() \ ++ /*SDRC*/\ ++ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ ++ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ ++ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ ++ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ ++ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ ++ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ ++ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ ++ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ ++ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ ++ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ ++ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ ++ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ ++ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ ++ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ ++ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ ++ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ ++ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ ++ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ ++ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ ++ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ ++ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ ++ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ ++ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ ++ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ ++ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ ++ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ ++ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ ++ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ ++ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ ++ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ ++ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ ++ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ ++ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ ++ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ ++ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ ++ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ ++ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ ++ /*GPMC*/\ ++ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ ++ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ ++ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ ++ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ ++ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ ++ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ ++ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ ++ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ ++ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ ++ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ ++ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ ++ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ ++ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ ++ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ ++ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ ++ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ ++ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ ++ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ ++ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ ++ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ ++ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ ++ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ ++ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ ++ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ ++ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ ++ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ ++ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ ++ /*Expansion card */\ ++ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/ \ ++ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/ \ ++ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/ \ ++ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/ \ ++ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/ \ ++ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/ \ ++ /* SB-T35 Ethernet */\ ++ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) /*GPMC_nCS4*/\ ++ /* CM-T35 Ethernet */\ ++ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)) /*GPMC_nCS5*/\ ++ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPIO_59*/\ ++ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*nADV_ALE*/\ ++ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*nOE*/\ ++ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*nWE*/\ ++ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) /*nBE0_CLE*/\ ++ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ ++ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*nWP*/\ ++ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*WAIT0*/\ ++ /*DSS*/\ ++ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ ++ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ ++ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ ++ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ ++ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ ++ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ ++ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ ++ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ ++ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ ++ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ ++ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ ++ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ ++ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ ++ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ ++ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ ++ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ ++ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ ++ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ ++ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ ++ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ ++ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ ++ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ ++ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ ++ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ ++ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ ++ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ ++ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ ++ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ ++ /*Serial Interface*/\ ++ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ ++ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ ++ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ ++ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ ++ /*Control and debug */\ ++ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ ++ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ ++ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ ++ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*OFF_MODE*/\ ++ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\ ++ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*green LED*/\ ++ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ ++ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ ++ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ ++ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ ++ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ ++ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\ ++ ++#endif +diff --git a/board/cm_t35/config.mk b/board/cm_t35/config.mk +new file mode 100644 +index 0000000..a90c86a +--- /dev/null ++++ b/board/cm_t35/config.mk +@@ -0,0 +1,30 @@ ++# ++# (C) Copyright 2009 ++# CompuLab, Ltd., <www.compulab.co.il> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++# Physical Address: ++# 8000'0000 (bank0) ++# ++# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 ++# (mem base + reserved) ++ ++# For use with external or internal boots. ++TEXT_BASE = 0x80e80000 +diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c +index dd2c940..0b3805a 100644 +--- a/cpu/arm_cortexa8/omap3/board.c ++++ b/cpu/arm_cortexa8/omap3/board.c +@@ -291,8 +291,11 @@ int dram_init(void) + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; ++ ++#if (CONFIG_NR_DRAM_BANKS > 1) + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; ++#endif + + return 0; + } +diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c +index 8b8cd6d..be254b5 100644 +--- a/cpu/arm_cortexa8/omap3/mem.c ++++ b/cpu/arm_cortexa8/omap3/mem.c +@@ -35,11 +35,6 @@ + * Only One NAND allowed on board at a time. + * The GPMC CS Base for the same + */ +-unsigned int boot_flash_base; +-unsigned int boot_flash_off; +-unsigned int boot_flash_sec; +-unsigned int boot_flash_type; +-volatile unsigned int boot_flash_env_addr; + + struct gpmc *gpmc_cfg; + +@@ -223,10 +218,6 @@ void gpmc_init(void) + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND) +- u32 f_off = CONFIG_SYS_MONITOR_LEN; +- u32 f_sec = 0; +-#endif + #endif + u32 config = 0; + +@@ -251,15 +242,6 @@ void gpmc_init(void) + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +-#if defined(CONFIG_ENV_IS_IN_NAND) +- f_off = SMNAND_ENV_OFFSET; +- f_sec = (128 << 10); /* 128 KiB */ +- /* env setup */ +- boot_flash_base = base; +- boot_flash_off = f_off; +- boot_flash_sec = f_sec; +- boot_flash_env_addr = f_off; +-#endif + #endif + + #if defined(CONFIG_CMD_ONENAND) +@@ -267,14 +249,5 @@ void gpmc_init(void) + base = PISMO1_ONEN_BASE; + size = PISMO1_ONEN_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +-#if defined(CONFIG_ENV_IS_IN_ONENAND) +- f_off = ONENAND_ENV_OFFSET; +- f_sec = (128 << 10); /* 128 KiB */ +- /* env setup */ +- boot_flash_base = base; +- boot_flash_off = f_off; +- boot_flash_sec = f_sec; +- boot_flash_env_addr = f_off; +-#endif + #endif + } +diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c +index 31b2003..3f66a6a 100644 +--- a/cpu/arm_cortexa8/omap3/sys_info.c ++++ b/cpu/arm_cortexa8/omap3/sys_info.c +@@ -173,15 +173,6 @@ u32 get_gpmc0_width(void) + return WIDTH_16BIT; + } + +-/************************************************************************* +- * get_board_rev() - setup to pass kernel board revision information +- * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) +- *************************************************************************/ +-u32 get_board_rev(void) +-{ +- return 0x20; +-} +- + /******************************************************** + * get_base(); get upper addr of current execution + *******************************************************/ +diff --git a/doc/README.omap3 b/doc/README.omap3 +index 6227151..1c1c16f 100644 +--- a/doc/README.omap3 ++++ b/doc/README.omap3 +@@ -21,6 +21,8 @@ Currently the following boards are supported: + + * TI/Logic PD Zoom 2 [7] + ++* CompuLab Ltd. CM-T35 [8] ++ + Toolchain + ========= + +@@ -61,6 +63,11 @@ make + make omap3_zoom2_config + make + ++* CM-T35: ++ ++make cm_t35_config ++make ++ + Custom commands + =============== + +@@ -119,7 +126,7 @@ To read a bit : + Acknowledgements + ================ + +-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by ++OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by + several TI employees. + + Links +@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit + [7] TI/Logic PD Zoom 2 + + http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf +-[8] TI OMAP3 U-Boot: ++ ++[8] CompuLab Ltd. CM-T35: ++ ++http://www.compulab.co.il/t35/html/t35-cm-datasheet.htm ++ ++[9] TI OMAP3 U-Boot: + + http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz +diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c +index c027abe..8509b6a 100644 +--- a/drivers/net/smc911x.c ++++ b/drivers/net/smc911x.c +@@ -37,7 +37,7 @@ void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \ + + #define mdelay(n) udelay((n)*1000) + +-static void smx911x_handle_mac_address(struct eth_device *dev) ++static void smc911x_handle_mac_address(struct eth_device *dev) + { + unsigned long addrh, addrl; + uchar *m = dev->enetaddr; +@@ -47,7 +47,7 @@ static void smx911x_handle_mac_address(struct eth_device *dev) + smc911x_set_mac_csr(dev, ADDRL, addrl); + smc911x_set_mac_csr(dev, ADDRH, addrh); + +- printf(DRIVERNAME ": MAC %pM\n", m); ++ printf("%s: MAC %pM\n", dev->name, m); + } + + static int smc911x_miiphy_read(struct eth_device *dev, +@@ -119,12 +119,12 @@ static void smc911x_phy_configure(struct eth_device *dev) + goto err_out; + } while (!(status & PHY_BMSR_LS)); + +- printf(DRIVERNAME ": phy initialized\n"); ++ printf("%s: phy initialized\n", dev->name); + + return; + + err_out: +- printf(DRIVERNAME ": autonegotiation timed out\n"); ++ printf("%s: autonegotiation timed out\n", dev->name); + } + + static void smc911x_enable(struct eth_device *dev) +@@ -148,14 +148,14 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd) + { + struct chip_id *id = dev->priv; + +- printf(DRIVERNAME ": detected %s controller\n", id->name); ++ printf("%s: detected %s controller\n", dev->name, id->name); + + smc911x_reset(dev); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(dev); + +- smx911x_handle_mac_address(dev); ++ smc911x_handle_mac_address(dev); + + /* Turn on Tx + Rx */ + smc911x_enable(dev); +@@ -193,7 +193,7 @@ static int smc911x_send(struct eth_device *dev, + if (!status) + return 0; + +- printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n", ++ printf("%s: failed to send packet: %s%s%s%s%s\n", dev->name, + status & TX_STS_LOC ? "TX_STS_LOC " : "", + status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "", + status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "", +@@ -206,6 +206,10 @@ static int smc911x_send(struct eth_device *dev, + static void smc911x_halt(struct eth_device *dev) + { + smc911x_reset(dev); ++ ++#ifdef CONFIG_SMC911X_KEEP_MAC ++ smc911x_handle_mac_address(dev); ++#endif + } + + static int smc911x_rx(struct eth_device *dev) +@@ -225,9 +229,8 @@ static int smc911x_rx(struct eth_device *dev) + *data++ = pkt_data_pull(dev, RX_DATA_FIFO); + + if (status & RX_STS_ES) +- printf(DRIVERNAME +- ": dropped bad packet. Status: 0x%08x\n", +- status); ++ printf("%s: dropped bad packet. Status: 0x%08x\n", ++ dev->name, status); + else + NetReceive(NetRxPackets[0], pktlen); + } +@@ -238,6 +241,7 @@ static int smc911x_rx(struct eth_device *dev) + int smc911x_initialize(u8 dev_num, int base_addr) + { + unsigned long addrl, addrh; ++ unsigned char enetaddr[6]; + struct eth_device *dev; + + dev = malloc(sizeof(*dev)); +@@ -248,6 +252,7 @@ int smc911x_initialize(u8 dev_num, int base_addr) + memset(dev, 0, sizeof(*dev)); + + dev->iobase = base_addr; ++ sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num); + + /* Try to detect chip. Will fail if not present. */ + if (smc911x_detect_chip(dev)) { +@@ -257,18 +262,20 @@ int smc911x_initialize(u8 dev_num, int base_addr) + + addrh = smc911x_get_mac_csr(dev, ADDRH); + addrl = smc911x_get_mac_csr(dev, ADDRL); +- dev->enetaddr[0] = addrl; +- dev->enetaddr[1] = addrl >> 8; +- dev->enetaddr[2] = addrl >> 16; +- dev->enetaddr[3] = addrl >> 24; +- dev->enetaddr[4] = addrh; +- dev->enetaddr[5] = addrh >> 8; ++ enetaddr[0] = addrl; ++ enetaddr[1] = addrl >> 8; ++ enetaddr[2] = addrl >> 16; ++ enetaddr[3] = addrl >> 24; ++ enetaddr[4] = addrh; ++ enetaddr[5] = addrh >> 8; ++ ++ if (is_valid_ether_addr(enetaddr)) ++ memcpy(dev->enetaddr, enetaddr, 6); + + dev->init = smc911x_init; + dev->halt = smc911x_halt; + dev->send = smc911x_send; + dev->recv = smc911x_rx; +- sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num); + + eth_register(dev); + return 1; +diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h +index 05e007c..0ea6ac1 100644 +--- a/drivers/net/smc911x.h ++++ b/drivers/net/smc911x.h +@@ -447,7 +447,7 @@ static int smc911x_detect_chip(struct eth_device *dev) + /* Special case -- no chip present */ + return -1; + } else if (val != 0x87654321) { +- printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val); ++ printf("%s: Invalid chip endian 0x%08lx\n", __func__, val); + return -1; + } + +@@ -456,7 +456,7 @@ static int smc911x_detect_chip(struct eth_device *dev) + if (chip_ids[i].id == val) break; + } + if (!chip_ids[i].id) { +- printf(DRIVERNAME ": Unknown chip ID %04lx\n", val); ++ printf("%s: Unknown chip ID %04lx\n", __func__, val); + return -1; + } + +@@ -480,8 +480,8 @@ static void smc911x_reset(struct eth_device *dev) + !(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY)) + udelay(10); + if (!timeout) { +- printf(DRIVERNAME +- ": timeout waiting for PM restore\n"); ++ printf("%s: timeout waiting for PM restore\n", ++ dev->name); + return; + } + } +@@ -496,7 +496,7 @@ static void smc911x_reset(struct eth_device *dev) + udelay(10); + + if (!timeout) { +- printf(DRIVERNAME ": reset timeout\n"); ++ printf("%s: reset timeout\n", dev->name); + return; + } + +diff --git a/examples/api/Makefile b/examples/api/Makefile +index 04a270b..057e85a 100644 +--- a/examples/api/Makefile ++++ b/examples/api/Makefile +@@ -49,6 +49,12 @@ ifeq ($(ARCH),ppc) + EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o + endif + ++ifeq ($(ARCH),arm) ++ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) ++EXT_COBJ_FILES-$(CONFIG_API) += lib_arm/eabi_compat.o ++endif ++endif ++ + # Create a list of source files so their dependencies can be auto-generated + SRCS += $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c)) + SRCS += $(addprefix $(SRCTREE)/,$(EXT_SOBJ_FILES-y:.o=.S)) +@@ -81,6 +87,10 @@ $(obj)%.o: $(SRCTREE)/lib_generic/%.c + $(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.S + $(CC) -g $(CFLAGS) -c -o $@ $< + ++# Rule to build architecture-specific library C files ++$(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.c ++ $(CC) -g $(CFLAGS) -c -o $@ $< ++ + ######################################################################### + + # defines $(obj).depend target +diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h +index 8ab2e39..7fdf00f 100644 +--- a/include/asm-arm/arch-omap3/cpu.h ++++ b/include/asm-arm/arch-omap3/cpu.h +@@ -136,6 +136,10 @@ struct gpmc { + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ + }; ++ ++/* Used for board specific gpmc initialization */ ++extern struct gpmc *gpmc_cfg; ++ + #else /* __ASSEMBLY__ */ + #define GPMC_CONFIG1 0x00 + #define GPMC_CONFIG2 0x04 +diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h +new file mode 100644 +index 0000000..37edbb5 +--- /dev/null ++++ b/include/configs/cm_t35.h +@@ -0,0 +1,281 @@ ++/* ++ * (C) Copyright 2009 CompuLab, Ltd. ++ * ++ * Authors : ++ * Igor Vaisbein <[email protected]> ++ * Mike Rapoport <[email protected]> ++ * ++ * Derived from omap3evm and Beagle Board by ++ * Manikandan Pillai <[email protected]> ++ * Richard Woodruff <[email protected]> ++ * Syed Mohammed Khasim <[email protected]> ++ * ++ * Configuration settings for the CompuLab CM-T35 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* High Level Configuration Options */ ++#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ ++#define CONFIG_OMAP 1 /* in a TI OMAP core */ ++#define CONFIG_OMAP34XX 1 /* which is a 34XX */ ++#define CONFIG_OMAP3430 1 /* which is in a 3430 */ ++#define CONFIG_CM_T35 1 /* working with CM_T35 */ ++ ++#include <asm/arch/cpu.h> /* get chip and board defs */ ++#include <asm/arch/omap3.h> ++ ++#define CONFIG_DISPLAY_CPUINFO 1 ++#define CONFIG_DISPLAY_BOARDINFO 1 ++ ++/* Clock Defines */ ++#define V_OSCK 26000000 /* Clock output from T2 */ ++#define V_SCLK (V_OSCK >> 1) ++ ++/* DDR type - Micron */ ++#define CONFIG_OMAP3_MICRON_DDR 1 ++ ++#undef CONFIG_USE_IRQ /* no support for IRQs */ ++#define CONFIG_MISC_INIT_R ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#define CONFIG_SERIAL_TAG 1 ++ ++/* Size of malloc() pool */ ++#define CONFIG_ENV_SIZE (128 << 10) /* Total Size Environment */ ++ /* Sector */ ++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512 << 10)) ++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ ++ /* initial data */ ++/* NS16550 Configuration */ ++#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ ++ ++#define CONFIG_SYS_NS16550 ++#define CONFIG_SYS_NS16550_SERIAL ++#define CONFIG_SYS_NS16550_REG_SIZE (-4) ++#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK ++ ++/* serial console configuration */ ++#define CONFIG_CONS_INDEX 3 ++#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 ++#define CONFIG_SERIAL3 3 /* UART3 */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ ++ 115200} ++#define CONFIG_MMC 1 ++#define CONFIG_OMAP3_MMC 1 ++#define CONFIG_SYS_MMC_MAX_DEVICE 1 ++#define CONFIG_DOS_PARTITION 1 ++ ++/* commands to include */ ++#include <config_cmd_default.h> ++ ++#define CONFIG_CMD_EXT2 /* EXT2 Support */ ++#define CONFIG_CMD_FAT /* FAT support */ ++#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ ++#define CONFIG_CMD_YAFFS2 /* YAFFS2 Support */ ++#define CONFIG_CMD_UBI /* UBI Support */ ++#define CONFIG_CMD_MTDPARTS ++ ++#define CONFIG_CMD_I2C /* I2C serial bus support */ ++#define CONFIG_CMD_MMC /* MMC support */ ++#define CONFIG_CMD_NAND /* NAND support */ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_PING ++ ++#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ ++#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ ++#undef CONFIG_CMD_IMLS /* List all found images */ ++ ++#define CONFIG_SYS_NO_FLASH ++ ++/* I2C */ ++#define CONFIG_SYS_I2C_SPEED 100000 ++#define CONFIG_SYS_I2C_SLAVE 1 ++#define CONFIG_SYS_I2C_BUS 0 ++#define CONFIG_SYS_I2C_BUS_SELECT 1 ++#define CONFIG_DRIVER_OMAP34XX_I2C 1 ++ ++/* TWL4030 */ ++#define CONFIG_TWL4030_POWER 1 ++ ++/* Board NAND Info. */ ++#define CONFIG_NAND_OMAP_GPMC 1 ++#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 ++#define OMAP34XX_GPMC_NAND_SMNAND 1 ++ ++#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ ++ /* to access nand */ ++#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ ++ /* to access */ ++ /* nand at CS0 */ ++ ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ ++ /* NAND devices */ ++#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ ++ ++/* JFFS2 */ ++#define CONFIG_JFFS2_NAND ++#define CONFIG_JFFS2_DEV "nand0" ++#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ ++ CONFIG_SYS_MAX_NAND_DEVICE) ++#define CONFIG_SYS_JFFS2_MEM_NAND ++#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS ++#define CONFIG_SYS_JFFS2_NUM_BANKS 1 ++ ++/* ubi/ubifs related definitions */ ++#define CONFIG_RBTREE ++#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ ++#define CONFIG_MTD_PARTITIONS ++ ++/* Environment information */ ++#define CONFIG_BOOTDELAY 3 ++ ++#define CONFIG_BOOTFILE uImage ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "loadaddr=0x82000000\0" \ ++ "baudrate=115200\0"\ ++ "console=ttyS2,115200n8\0" \ ++ "autoload=no\0" \ ++ "mmcargs=setenv bootargs console=${console} " \ ++ "root=/dev/mmcblk0p2 rw " \ ++ "rootfstype=ext3 rootwait\0" \ ++ "nandargs=setenv bootargs console=${console} " \ ++ "root=/dev/mtdblock4 rw " \ ++ "rootfstype=jffs2\0" \ ++ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ ++ "bootscript=echo Running bootscript from mmc ...; " \ ++ "source ${loadaddr}\0" \ ++ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ ++ "mmcboot=echo Booting from mmc ...; " \ ++ "run mmcargs; " \ ++ "bootm ${loadaddr}\0" \ ++ "nandboot=echo Booting from nand ...; " \ ++ "run nandargs; " \ ++ "onenand read ${loadaddr} 280000 400000; " \ ++ "bootm ${loadaddr}\0" \ ++ ++#define CONFIG_BOOTCOMMAND \ ++ "if mmc init; then " \ ++ "if run loadbootscript; then " \ ++ "run bootscript; " \ ++ "else " \ ++ "if run loaduimage; then " \ ++ "run mmcboot; " \ ++ "else run nandboot; " \ ++ "fi; " \ ++ "fi; " \ ++ "else run nandboot; fi" ++ ++#define MTDIDS_DEFAULT "nand0=nand" ++#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader)," \ ++ "1920k(u-boot)," \ ++ "256k(env)," \ ++ "4m(kernel)," \ ++ "-(fs)," ++ ++#define CONFIG_AUTO_COMPLETE 1 ++/* ++ * Miscellaneous configurable options ++ */ ++#define CONFIG_API 1 ++#define V_PROMPT "CM-T35 # " ++ ++#define CONFIG_SYS_LONGHELP /* undef to save memory */ ++#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ ++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " ++#define CONFIG_SYS_PROMPT V_PROMPT ++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ ++ ++/* Print Buffer Size */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ ++ sizeof(CONFIG_SYS_PROMPT) + 16) ++#define CONFIG_SYS_MAXARGS 16 /* max number of command */ ++ /* args */ ++/* Boot Argument Buffer Size */ ++#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) ++ ++/* memtest works on */ ++#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) ++#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x08000000) ++ ++#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ ++ /* address */ ++ ++/* ++ * OMAP3 has 12 GP timers, they can be driven by the system clock ++ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). ++ * This rate is divided by a local divisor. ++ */ ++#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 ++#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ ++#define CONFIG_SYS_HZ 1000 ++ ++/* ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128 << 10) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ ++#endif ++ ++/* Physical Memory Map */ ++#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may not be populated on CM-T35 */ ++#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 ++#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ ++ ++/* SDRAM Bank Allocation method */ ++#define SDRC_R_B_C 1 ++ ++/* PISMO support */ ++#define PISMO1_NAND_SIZE GPMC_SIZE_128M ++ ++/* environment */ ++#define CONFIG_ENV_IS_IN_NAND 1 ++#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET ++ ++/* SMSC9220 Ethernet */ ++#if defined(CONFIG_CMD_NET) ++#define CONFIG_NET_MULTI ++#define CONFIG_SMC911X ++#define CONFIG_SMC911X_32_BIT ++#define CONFIG_SMC911X_KEEP_MAC ++#define CM_T35_SMC911X_BASE 0x2C000000 ++#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + (16 << 20)) ++#define CONFIG_SMC911X_BASE CM_T35_SMC911X_BASE /* for smc911x_eeprom */ ++#endif /* (CONFIG_CMD_NET) */ ++ ++#define CONFIG_OMAP3_GPIO_6 1 ++ ++#endif /* __CONFIG_H */ +diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h +index bd5037e..bac5127 100644 +--- a/include/configs/devkit8000.h ++++ b/include/configs/devkit8000.h +@@ -293,15 +293,6 @@ + #define CONFIG_ENV_IS_IN_NAND 1 + #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +-#define CONFIG_ENV_OFFSET boot_flash_off +- +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + + #endif /* __CONFIG_H */ +diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h +index 19a5ec9..73ead6c 100644 +--- a/include/configs/omap3_beagle.h ++++ b/include/configs/omap3_beagle.h +@@ -291,8 +291,8 @@ + #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ + #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + + /*----------------------------------------------------------------------- +@@ -310,13 +310,4 @@ + #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS + #define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #endif /* __CONFIG_H */ +diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h +index a5514ae..70eb86b 100644 +--- a/include/configs/omap3_evm.h ++++ b/include/configs/omap3_evm.h +@@ -262,7 +262,7 @@ + #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +-#define CONFIG_SYS_FLASH_BASE boot_flash_base ++#define CONFIG_SYS_FLASH_BASE ONENAND_MAP + + /* Monitor at start of flash */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +@@ -272,9 +272,9 @@ + #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ + #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off +-#define CONFIG_ENV_ADDR boot_flash_env_addr ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET ++#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET + + /*----------------------------------------------------------------------- + * CFI FLASH driver setup +@@ -291,15 +291,6 @@ + #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS + #define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + /*---------------------------------------------------------------------------- + * SMSC9115 Ethernet from SMSC9118 family + *---------------------------------------------------------------------------- +diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h +index ffb515d..6ffae60 100644 +--- a/include/configs/omap3_overo.h ++++ b/include/configs/omap3_overo.h +@@ -266,7 +266,7 @@ + #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +-#define CONFIG_SYS_FLASH_BASE boot_flash_base ++#define CONFIG_SYS_FLASH_BASE NAND_BASE + + /* Monitor at start of flash */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +@@ -276,8 +276,8 @@ + #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ + #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + + /*----------------------------------------------------------------------- +@@ -295,15 +295,6 @@ + #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS + #define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #if defined(CONFIG_CMD_NET) + /*---------------------------------------------------------------------------- + * SMSC9211 Ethernet from SMSC9118 family +diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h +index 6f21af3..041412e 100644 +--- a/include/configs/omap3_pandora.h ++++ b/include/configs/omap3_pandora.h +@@ -259,7 +259,7 @@ + #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +-#define CONFIG_SYS_FLASH_BASE boot_flash_base ++#define CONFIG_SYS_FLASH_BASE ONENAND_MAP + + /* Monitor at start of flash */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +@@ -269,8 +269,8 @@ + #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ + #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + + /*----------------------------------------------------------------------- +@@ -288,13 +288,4 @@ + #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS + #define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #endif /* __CONFIG_H */ +diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h +index 229dc5e..3ec7ce0 100644 +--- a/include/configs/omap3_sdp3430.h ++++ b/include/configs/omap3_sdp3430.h +@@ -355,15 +355,4 @@ + * - rest for filesystem + */ + +-/*--------------------------------------------------------------------------*/ +- +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #endif /* __CONFIG_H */ +diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h +index da4b677..9811f15 100644 +--- a/include/configs/omap3_zoom1.h ++++ b/include/configs/omap3_zoom1.h +@@ -267,7 +267,7 @@ + #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +-#define CONFIG_SYS_FLASH_BASE boot_flash_base ++#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NAND_BASE + + /* Monitor at start of flash */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +@@ -277,8 +277,8 @@ + #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ + #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + + /*----------------------------------------------------------------------- +@@ -296,13 +296,4 @@ + #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS + #define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #endif /* __CONFIG_H */ +diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h +index 32cd6fd..1a23acd 100644 +--- a/include/configs/omap3_zoom2.h ++++ b/include/configs/omap3_zoom2.h +@@ -232,7 +232,7 @@ + #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +-#define CONFIG_SYS_FLASH_BASE boot_flash_base ++#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NAND_BASE + + /* Monitor at start of flash */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +@@ -240,8 +240,8 @@ + #define CONFIG_ENV_IS_IN_NAND 1 + #define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */ + +-#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +-#define CONFIG_ENV_OFFSET boot_flash_off ++#define CONFIG_SYS_ENV_SECT_SIZE (1 << 128) ++#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET + #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + + /*----------------------------------------------------------------------- +@@ -251,13 +251,4 @@ + #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) + #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +-#ifndef __ASSEMBLY__ +-extern struct gpmc *gpmc_cfg; +-extern unsigned int boot_flash_base; +-extern volatile unsigned int boot_flash_env_addr; +-extern unsigned int boot_flash_off; +-extern unsigned int boot_flash_sec; +-extern unsigned int boot_flash_type; +-#endif +- + #endif /* __CONFIG_H */
recipes/u-boot/u-boot_git.bb +2 -0
@@ -11,8 +11,10 @@ SRCREV_c7x0 = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee" SRCREV_afeb9260 = "6b8edfde22acc574b5532e9f086e6a7287a9bc78" SRCREV_afeb9260-180 = "6b8edfde22acc574b5532e9f086e6a7287a9bc78" SRCREV_palmpre = "6b8edfde22acc574b5532e9f086e6a7287a9bc78" +SRCREV_cm-t35 = "3c014f1586d5bfe30dca7549396915c83f31cd30" SRC_URI_append_afeb9260 = " file://AFEB9260-network-fix.patch;patch=1" SRC_URI_append_afeb9260-180 = " file://AFEB9260-network-fix.patch;patch=1" +SRC_URI_append_cm-t35 = "file://cm-t35/cm-t35.patch;patch=1" SRC_URI_beagleboard = "git://git.denx.de/u-boot-ti.git;protocol=git \ file://fw_env.config \
Signature · 1 line
1.6.4.4
PATCH 5/5 xserver-xorg-conf: add cm-t35 support
In reply to Mike Rapoport--- .../xserver-xorg-conf/cm-t35/xorg.conf | 29 ++++++++++++++++++++ recipes/xorg-xserver/xserver-xorg-conf_0.1.bb | 2 +- 2 files changed, 30 insertions(+), 1 deletions(-) create mode 100644 recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf
recipes/xorg-xserver/xserver-xorg-conf/cm-t35/xorg.conf new file +29 -0
@@ -0,0 +1,29 @@ +Section "Module" + Load "extmod" + Load "dbe" + Load "glx" + Load "freetype" + Load "type1" + Load "record" + Load "dri" +EndSection + +Section "Monitor" + Identifier "Builtin Default Monitor" +EndSection + +Section "Device" + Identifier "Builtin Default fbdev Device 0" + Driver "omapfb" +EndSection + +Section "Screen" + Identifier "Builtin Default fbdev Screen 0" + Device "Builtin Default fbdev Device 0" + Monitor "Builtin Default Monitor" +EndSection + +Section "ServerLayout" + Identifier "Builtin Default Layout" + Screen "Builtin Default fbdev Screen 0" +EndSection
recipes/xorg-xserver/xserver-xorg-conf_0.1.bb +1 -1
@@ -1,5 +1,5 @@ DESCRIPTION = "Machine specific xorg.conf files" -PR = "r16" +PR = "r17" SRC_URI = "file://xorg.conf"
Signature · 1 line
1.6.4.4
PATCH 2/5 linux-omap 2.6.32: add cm-t35 support
In reply to Mike Rapoport--- .../0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch | 159 ++ ...do24m-ensure-chip-select-changes-between-.patch | 30 + ...002-omap3-cm-t35-add-DSS2-display-support.patch | 307 ++++ ...03-omap3-cm-t35-update-defconfig-for-DSS2.patch | 145 ++ .../0004-omap3-cm-t35-add-cm-t35-mux-configs.patch | 427 +++++ .../0006-omap3-cm-t35-update-defconfig.patch | 87 + recipes/linux/linux-omap-2.6.32/cm-t35/defconfig | 1823 ++++++++++++++++++++ recipes/linux/linux-omap_2.6.32.bb | 12 +- 8 files changed, 2989 insertions(+), 1 deletions(-) create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch create mode 100644 recipes/linux/linux-omap-2.6.32/cm-t35/defconfig
recipes/linux/linux-omap-2.6.32/cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch new file +159 -0
@@ -0,0 +1,159 @@ +From 971595be3dc245cfa095747263b94535d27a3f1c Mon Sep 17 00:00:00 2001 +From: Mike Rapoport <[email protected]> +Date: Tue, 1 Dec 2009 12:14:10 +0200 +Subject: [PATCH 1/6] OMAP: DSS2: add Toppoly TDO35S panel + +Signed-off-by: Mike Rapoport <[email protected]> +--- + drivers/video/omap2/displays/Kconfig | 6 + + drivers/video/omap2/displays/Makefile | 1 + + .../video/omap2/displays/panel-toppoly-tdo35s.c | 112 ++++++++++++++++++++ + 3 files changed, 119 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +index 79d2861..0d0d4f3 100644 +--- a/drivers/video/omap2/displays/Kconfig ++++ b/drivers/video/omap2/displays/Kconfig +@@ -25,4 +25,10 @@ config PANEL_TAAL + help + Taal DSI command mode panel from TPO. + ++config PANEL_TOPPOLY_TDO35S ++ tristate "Toppoly TDO35S LCD Panel support" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used in CM-T35 ++ + endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +index d44e765..e299454 100644 +--- a/drivers/video/omap2/displays/Makefile ++++ b/drivers/video/omap2/displays/Makefile +@@ -3,3 +3,4 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o + obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o + + obj-$(CONFIG_PANEL_TAAL) += panel-taal.o ++obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o +\ No newline at end of file +diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c +new file mode 100644 +index 0000000..e744b8c +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c +@@ -0,0 +1,112 @@ ++/* ++ * LCD panel driver for Toppoly TDO35S ++ * ++ * Copyright (C) 2009 CompuLab, Ltd. ++ * Author: Mike Rapoport <[email protected]> ++ * ++ * Based on generic panel support ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen <[email protected]> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++ ++#include <plat/display.h> ++ ++static struct omap_video_timings toppoly_tdo_panel_timings = { ++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ ++ .x_res = 480, ++ .y_res = 640, ++ ++ .pixel_clock = 26000, ++ ++ .hfp = 104, ++ .hsw = 8, ++ .hbp = 8, ++ ++ .vfp = 4, ++ .vsw = 2, ++ .vbp = 2, ++}; ++ ++static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev) ++{ ++ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS; ++ dssdev->panel.timings = toppoly_tdo_panel_timings; ++ ++ return 0; ++} ++ ++static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev) ++{ ++} ++ ++static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev) ++{ ++ int r = 0; ++ ++ if (dssdev->platform_enable) ++ r = dssdev->platform_enable(dssdev); ++ ++ return r; ++} ++ ++static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev) ++{ ++ if (dssdev->platform_disable) ++ dssdev->platform_disable(dssdev); ++} ++ ++static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev) ++{ ++ toppoly_tdo_panel_disable(dssdev); ++ return 0; ++} ++ ++static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev) ++{ ++ return toppoly_tdo_panel_enable(dssdev); ++} ++ ++static struct omap_dss_driver generic_driver = { ++ .probe = toppoly_tdo_panel_probe, ++ .remove = toppoly_tdo_panel_remove, ++ ++ .enable = toppoly_tdo_panel_enable, ++ .disable = toppoly_tdo_panel_disable, ++ .suspend = toppoly_tdo_panel_suspend, ++ .resume = toppoly_tdo_panel_resume, ++ ++ .driver = { ++ .name = "toppoly_tdo35s_panel", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init toppoly_tdo_panel_drv_init(void) ++{ ++ return omap_dss_register_driver(&generic_driver); ++} ++ ++static void __exit toppoly_tdo_panel_drv_exit(void) ++{ ++ omap_dss_unregister_driver(&generic_driver); ++} ++ ++module_init(toppoly_tdo_panel_drv_init); ++module_exit(toppoly_tdo_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.6.4.4 +
recipes/linux/linux-omap-2.6.32/cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch new file +30 -0
@@ -0,0 +1,30 @@ +From 8a2cbbaa60ea06370d2a6d9303b1aab54cdb8a69 Mon Sep 17 00:00:00 2001 +From: Mike Rapoport <[email protected]> +Date: Tue, 24 Nov 2009 10:09:35 +0200 +Subject: [PATCH] backlight: tdo24m: ensure chip select changes between transfers + +Some SPI host drivers do not change chip select betwen transfers unless +.cs_chnage field is explicitly set. The LCD spec requires chip select +change between consecuitive transfers, so ensure it at the SPI driver +level. + +Signed-off-by: Mike Rapoport <[email protected]> +--- + drivers/video/backlight/tdo24m.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c +index bbfb502..4a3d46e 100644 +--- a/drivers/video/backlight/tdo24m.c ++++ b/drivers/video/backlight/tdo24m.c +@@ -367,6 +367,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) + + spi_message_init(m); + ++ x->cs_change = 1; + x->tx_buf = &lcd->buf[0]; + spi_message_add_tail(x, m); + +-- +1.6.4.4 +
recipes/linux/linux-omap-2.6.32/cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch new file +307 -0
307 lines not on this page · raw message
recipes/linux/linux-omap-2.6.32/cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch new file +145 -0
145 lines not on this page · raw message
recipes/linux/linux-omap-2.6.32/cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch new file +427 -0
427 lines not on this page · raw message
recipes/linux/linux-omap-2.6.32/cm-t35/0006-omap3-cm-t35-update-defconfig.patch new file +87 -0
87 lines not on this page · raw message
recipes/linux/linux-omap-2.6.32/cm-t35/defconfig new file +1823 -0
1,823 lines not on this page · raw message
recipes/linux/linux-omap_2.6.32.bb +11 -1
@@ -3,9 +3,10 @@ require linux.inc DESCRIPTION = "Linux kernel for OMAP processors" KERNEL_IMAGETYPE = "uImage" -COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo|omapzoom|omapzoom2|omap4430-sdp" +COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo|omapzoom|omapzoom2|omap4430-sdp|cm-t35" DEFAULT_PREFERENCE = "-1" +DEFAULT_PREFERENCE_cm-t35 = "1" SRCREV = "89c9eaeb92c97348dcabd6cb377b646c00855f6a"
@@ -23,6 +24,15 @@ file://usb/ehci-omap.c-mach-to-plat.diff;patch=1 \ SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \ " +SRC_URI_append_cm-t35 = " \ +file://cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch;patch=1 \ +file://cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch;patch=1 \ +file://cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch;patch=1 \ +file://cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch;patch=1 \ +file://cm-t35/0006-omap3-cm-t35-update-defconfig.patch;patch=1 \ +file://cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch;patch=1 \ +"
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.6.4.4
Part of the diff is not shown here. View the raw message.
Re: [PATCH 3/5] cm-t35: add machine configuration
In reply to Mike RapoportQuoted 3 lines · Mike Rapoport
Signed-off-by Mike Rapoport<[email protected]>+MACHINE_EXTRA_RRECOMMENDS = "omap3-sgx-modules marvell-sdio-fw"
The current sgx release and all the following ones will have omap3-sgx-modules built directly from the .bin, so everyone building a task-base based images will have to request that from TI. Do you really want that?
regards,
Koen
Re: [PATCH 2/5] linux-omap 2.6.32: add cm-t35 support
In reply to Mike Rapoportrecipes/linux/linux-omap_2.6.32.bb file://usb/ehci-omap.c-mach-to-plat.diff;patch=1 \ · line 35
Quoted 11 lines · Mike Rapoport
Signed-off-by Mike Rapoport<[email protected]>recipes/linux/linux-omap_2.6.32.bb +9
-0+SRC_URI_append_cm-t35 = " \ +file://cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch;patch=1 \ +file://cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch;patch=1 \ +file://cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch;patch=1 \ +file://cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch;patch=1 \ +file://cm-t35/0006-omap3-cm-t35-update-defconfig.patch;patch=1 \ +file://cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch;patch=1 \ +" +
Could you make those patches non-machine specific? If you put them in the main SRC_URI they stand a better change of being kept up to date. I'm going to add a lot of patches to that recipe soon and I don't want to break anything in the process.
regards,
Koen
Re: [PATCH 2/5] linux-omap 2.6.32: add cm-t35 support
Quoted 19 lines · Koen Kooi
Quoted 10 lines · Mike Rapoport
Signed-off-by Mike Rapoport<[email protected]>recipes/linux/linux-omap_2.6.32.bb +4
-0+SRC_URI_append_cm-t35 = " \ +file://cm-t35/0001-OMAP-DSS2-add-Toppoly-TDO35S-panel.patch;patch=1 \ +file://cm-t35/0002-omap3-cm-t35-add-DSS2-display-support.patch;patch=1 \ +file://cm-t35/0003-omap3-cm-t35-update-defconfig-for-DSS2.patch;patch=1\
recipes/linux/linux-omap_2.6.32.bb +3
-0+file://cm-t35/0004-omap3-cm-t35-add-cm-t35-mux-configs.patch;patch=1 \ +file://cm-t35/0006-omap3-cm-t35-update-defconfig.patch;patch=1 \ +file://cm-t35/0001-backlight-tdo24m-ensure-chip-select-changes-between-.patch;patch=1Quoted 3 lines
\
+"
+Could you make those patches non-machine specific? If you put them in the main
SRC_URIthey stand a better change of being kept up to date. I'm going to add a lot of patches to that recipe soon and I don't want to break anything in the process.
Ok, will do.
Quoted 10 lines
regards,
Koen
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH 3/5] cm-t35: add machine configuration
In reply to Koen KooiQuoted 9 lines · Koen Kooi
Quoted 3 lines · Mike Rapoport
Signed-off-by Mike Rapoport<[email protected]>+MACHINE_EXTRA_RRECOMMENDS = "omap3-sgx-modules marvell-sdio-fw"
The current sgx release and all the following ones will have omap3-sgx-modules built directly from the .bin, so everyone building a task-base based images will have to request that from TI. Do you really want that?
This is difficult to tell... I think for now I'll align cm-t35 with other omap3 machines.
Quoted 10 lines
regards,
Koen
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 2 lines
Sincerely yours, Mike.
Re: [PATCH 3/5] cm-t35: add machine configuration
In reply to Koen KooiDnia środa, 9 grudnia 2009 o 00:10:51 Koen Kooi napisał(a):
Quoted 9 lines · Mike Rapoport
Quoted 3 lines
Signed-off-by Mike Rapoport<[email protected]>+MACHINE_EXTRA_RRECOMMENDS = "omap3-sgx-modules marvell-sdio-fw"
The current sgx release and all the following ones will have omap3-sgx-modules built directly from the .bin, so everyone building a task-base based images will have to request that from TI. Do you really want that?
As so called maintainer of mistical UmbaUmba out-of-tree distribution I also would like to not have 'omap3-sgx-modules' in extra rrecommends as I do not need it to run text based systems (unless someone wrote OpenGL accelerated text console which I know nothing about it).
Regards,
Signature · 3 lines
JID: [email protected] Website: http://marcin.juszkiewicz.com.pl/ LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz