Skip to contentSkip to conversation

Pull request for branch for-2010.11/gtk-bump

GIT PULL New Thomas Petazzoni 4 participants 10 messages Sep 28, 2010 – Oct 5, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

Here is a set of patches that bump components of the Gtk stack. The most important bump is Gtk itself, bumped from the old 2.12 to 2.20. The result is that Gtk can no longer be built with DirectFB as the backend, as announced during the 2010.08 cycle.

I've tested these changes by running the gtkperf application on top of the Xfbdev server in a Qemu ARM system.

Thanks,

Thomas

The following changes since commit 3e5e39a8a25a4a085afe08bdcf46933c8d569ed7:
Peter Korsgaard (1):
barebox/u-boot/linux: don't error out on missing config when make source

are available in the git repository at:

git://git.busybox.net/~tpetazzoni/git/buildroot for-2010.11/gtk-bump

Thomas Petazzoni (3):
libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken
libglib2: bump version to 2.24.2
pango: bump version to 1.28.2

 package/libglib2/libglib2.mk                       |    2 +-
 package/libgtk2/Config.in                          |   12 +-
 ... host-libgtk2-2.20.1-reduce-dependencies.patch} |  123 ++++------
 package/libgtk2/libgtk2-2.12.6-configure.patch     |  256 --------------------
 package/libgtk2/libgtk2-2.12.6-no-tests.patch      |   11 -
 package/libgtk2/libgtk2-2.20.1-libtool.patch       |   60 +++++
 package/libgtk2/libgtk2.mk                         |   14 +-
 package/pango/pango.mk                             |    2 +-
 8 files changed, 120 insertions(+), 360 deletions(-)
 rename package/libgtk2/{host-libgtk2-2.12.12-reduce-dependencies.patch => host-libgtk2-2.20.1-reduce-dependencies.patch} (58%)
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-configure.patch
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-no-tests.patch
 create mode 100644 package/libgtk2/libgtk2-2.20.1-libtool.patch

Thanks,

Signature · 1 line
Thomas Petazzoni
#1 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

Finally, we bump Gtk from the old and ancient 2.12 version to the latest 2.20.1 version currently available.

As noted in the 2010.08 release, the DirectFB back-end is broken in Gtk, so libgtk2 cannot be selected anymore with the DirectFB back-end. For the moment, we keep the Gtk/DirectFB code around, as it's possible that a fixed DirectFB back-end will be part of Gtk 2.22.

In addition to this, we :

* Upgrade the "reduce-dependencies" patch

* Remove the "configure" and "no-tests" patches which do not seem to be useful anymore

* Add a libtool patch

We also remove references to a non-existant 2.15 gtk version in libgtk2.mk.

---
 package/libgtk2/Config.in                          |   12 +-
 ... host-libgtk2-2.20.1-reduce-dependencies.patch} |  123 ++++------
 package/libgtk2/libgtk2-2.12.6-configure.patch     |  256 --------------------
 package/libgtk2/libgtk2-2.12.6-no-tests.patch      |   11 -
 package/libgtk2/libgtk2-2.20.1-libtool.patch       |   60 +++++
 package/libgtk2/libgtk2.mk                         |   14 +-
 6 files changed, 118 insertions(+), 358 deletions(-)
 rename package/libgtk2/{host-libgtk2-2.12.12-reduce-dependencies.patch => host-libgtk2-2.20.1-reduce-dependencies.patch} (58%)
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-configure.patch
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-no-tests.patch
 create mode 100644 package/libgtk2/libgtk2-2.20.1-libtool.patch
package/libgtk2/Config.in +6 -6
index bc4ca9d..d578f33 100644
@@ -4,14 +4,14 @@ config BR2_PACKAGE_LIBGTK2
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_PS
 	select BR2_PACKAGE_CAIRO_PDF
+	select BR2_PACKAGE_CAIRO_SVG
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_PANGO
-	# libgtk2 on DirectFB is deprecated because it is no longer
-	# supported in recent versions of Gtk. We will remove support
-	# for Gtk over DirectFB in the next Buildroot version unless
-	# support for DirectFB in mainline Gtk is improved in the mean
-	# time.
-	depends on BR2_PACKAGE_XORG7||(BR2_PACKAGE_DIRECTFB && BR2_DEPRECATED)
+	# libgtk2 on DirectFB is broken because it is no longer
+	# supported in recent versions of Gtk. However, as it is
+	# likely that support for DirectFB will be re-added in Gtk
+	# 2.22, we are keeping this around until Gtk 2.22 is released.
+	depends on BR2_PACKAGE_XORG7||(BR2_PACKAGE_DIRECTFB && BR2_BROKEN)
 	depends on BR2_USE_WCHAR # glib2
 	depends on BR2_INSTALL_LIBSTDCPP # pango
 	help
package/libgtk2/host-libgtk2-2.20.1-reduce-dependencies.patch renamed from package/libgtk2/host-libgtk2-2.12.12-reduce-dependencies.patch +46 -77

179 lines not on this page · raw message

package/libgtk2/libgtk2-2.12.6-configure.patch deleted +0 -256

256 lines not on this page · raw message

package/libgtk2/libgtk2-2.12.6-no-tests.patch deleted +0 -11
deleted file mode 100644
index ea92433..0000000
@@ -1,11 +0,0 @@
---- a/Makefile.in	2008-01-28 22:38:09.000000000 -0500
-+++ b/Makefile.in	2008-02-11 12:52:45.000000000 -0500
-@@ -330,7 +330,7 @@ sharedstatedir = @sharedstatedir@
- sysconfdir = @sysconfdir@
- target_alias = @target_alias@
- 
--SRC_SUBDIRS = gdk-pixbuf gdk gtk modules demos tests perf contrib
-+SRC_SUBDIRS = gdk-pixbuf gdk gtk modules demos perf contrib
- SUBDIRS = po po-properties $(SRC_SUBDIRS) docs m4macros
- 
- # require automake 1.4
package/libgtk2/libgtk2-2.20.1-libtool.patch new file +60 -0

60 lines not on this page · raw message

package/libgtk2/libgtk2.mk +6 -8
index d669622..a2321d1 100644
@@ -3,8 +3,8 @@
 # libgtk2.0
 #
 #############################################################
-LIBGTK2_VERSION_MAJOR:=2.12
-LIBGTK2_VERSION_MINOR:=12
+LIBGTK2_VERSION_MAJOR:=2.20
+LIBGTK2_VERSION_MINOR:=1
 LIBGTK2_VERSION = $(LIBGTK2_VERSION_MAJOR).$(LIBGTK2_VERSION_MINOR)
 
 LIBGTK2_SOURCE = gtk+-$(LIBGTK2_VERSION).tar.bz2
@@ -12,6 +12,7 @@ LIBGTK2_SITE = ftp://ftp.gtk.org/pub/gtk/$(LIBGTK2_VERSION_MAJOR)
 LIBGTK2_AUTORECONF = NO
 LIBGTK2_INSTALL_STAGING = YES
 LIBGTK2_INSTALL_TARGET = YES
+LIBGTK2_LIBTOOL_PATCH = NO
 
 LIBGTK2_CONF_ENV = ac_cv_func_posix_getpwuid_r=yes glib_cv_stack_grows=no \
 		glib_cv_uscore=no \
@@ -64,7 +65,8 @@ LIBGTK2_CONF_ENV = ac_cv_func_posix_getpwuid_r=yes glib_cv_stack_grows=no \
 		ac_cv_path_GTK_UPDATE_ICON_CACHE=$(HOST_DIR)/usr/bin/gtk-update-icon-cache \
 		ac_cv_path_GDK_PIXBUF_CSOURCE=$(HOST_DIR)/usr/bin/gdk-pixbuf-csource \
 		ac_cv_prog_F77=no \
-		ac_cv_path_CUPS_CONFIG=no
+		ac_cv_path_CUPS_CONFIG=no \
+		gio_can_sniff=no
 
 LIBGTK2_CONF_OPT = --enable-shared \
 		--enable-static \
@@ -90,11 +92,6 @@ else
 	LIBGTK2_CONF_OPT += --without-x
 endif
 
-# Buildroot does not support JPEG2000 library
-ifeq ($(LIBGTK2_VERSION_MAJOR),2.15)
-LIBGTK2_CONF_OPT += --without-libjasper
-endif
-
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 LIBGTK2_DEPENDENCIES += libpng
 else
@@ -135,6 +132,7 @@ LIBGTK2_POST_INSTALL_TARGET_HOOKS += LIBGTK_POST_INSTALL_TWEAKS
 
 HOST_LIBGTK2_DEPENDENCIES = host-libglib2 host-libpng
 HOST_LIBGTK2_AUTORECONF = YES
+HOST_LIBGTK2_LIBTOOL_PATCH = NO
 HOST_LIBGTK2_CONF_OPT = \
 		--disable-static \
 		--disable-glibtest \
Signature · 1 line
1.7.0.4
#7 lore raw

PATCH 2/3 libglib2: bump version to 2.24.2

In reply to Thomas Petazzoni

This is a mechanical bump, no other changes involved.

---
 package/libglib2/libglib2.mk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
package/libglib2/libglib2.mk +1 -1
index 61e8c1c..e45e89c 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 LIBGLIB2_VERSION_MAJOR = 2.24
-LIBGLIB2_VERSION_MINOR = 1
+LIBGLIB2_VERSION_MINOR = 2
 LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).$(LIBGLIB2_VERSION_MINOR)
 LIBGLIB2_SOURCE = glib-$(LIBGLIB2_VERSION).tar.bz2
 LIBGLIB2_SITE = http://ftp.gnome.org/pub/gnome/sources/glib/$(LIBGLIB2_VERSION_MAJOR)
Signature · 1 line
1.7.0.4
#9 lore raw

PATCH 3/3 pango: bump version to 1.28.2

In reply to Thomas Petazzoni

This is a mechanical bump, no other changes involved.

---
 package/pango/pango.mk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
package/pango/pango.mk +1 -1
index dc04b55..373eb8b 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 PANGO_VERSION_MAJOR = 1.28
-PANGO_VERSION_MINOR = 0
+PANGO_VERSION_MINOR = 2
 PANGO_VERSION = $(PANGO_VERSION_MAJOR).$(PANGO_VERSION_MINOR)
 
 PANGO_SOURCE = pango-$(PANGO_VERSION).tar.bz2
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

In reply to Thomas Petazzoni

Gtk+ 2.22 has been released early this week, it brings back compiling/quite-good-working DirectFB backend.

Would you consider bumping to 2.22 ?

Le mercredi 29 septembre 2010 ? 00:12 +0200, Thomas Petazzoni a ?crit :

Quoted 650 lines

Finally, we bump Gtk from the old and ancient 2.12 version to the latest 2.20.1 version currently available.

As noted in the 2010.08 release, the DirectFB back-end is broken in Gtk, so libgtk2 cannot be selected anymore with the DirectFB back-end. For the moment, we keep the Gtk/DirectFB code around, as it's possible that a fixed DirectFB back-end will be part of Gtk 2.22.

In addition to this, we :

* Upgrade the "reduce-dependencies" patch

* Remove the "configure" and "no-tests" patches which do not seem to be useful anymore

* Add a libtool patch

We also remove references to a non-existant 2.15 gtk version in libgtk2.mk.

---
 package/libgtk2/Config.in                          |   12 +-
 ... host-libgtk2-2.20.1-reduce-dependencies.patch} |  123 ++++------
 package/libgtk2/libgtk2-2.12.6-configure.patch     |  256 --------------------
 package/libgtk2/libgtk2-2.12.6-no-tests.patch      |   11 -
 package/libgtk2/libgtk2-2.20.1-libtool.patch       |   60 +++++
 package/libgtk2/libgtk2.mk                         |   14 +-
 6 files changed, 118 insertions(+), 358 deletions(-)
 rename package/libgtk2/{host-libgtk2-2.12.12-reduce-dependencies.patch => host-libgtk2-2.20.1-reduce-dependencies.patch} (58%)
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-configure.patch
 delete mode 100644 package/libgtk2/libgtk2-2.12.6-no-tests.patch
 create mode 100644 package/libgtk2/libgtk2-2.20.1-libtool.patch
package/libgtk2/Config.in +6 -6
index bc4ca9d..d578f33 100644
@@ -4,14 +4,14 @@ config BR2_PACKAGE_LIBGTK2
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_PS
 	select BR2_PACKAGE_CAIRO_PDF
+	select BR2_PACKAGE_CAIRO_SVG
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_PANGO
-	# libgtk2 on DirectFB is deprecated because it is no longer
-	# supported in recent versions of Gtk. We will remove support
-	# for Gtk over DirectFB in the next Buildroot version unless
-	# support for DirectFB in mainline Gtk is improved in the mean
-	# time.
-	depends on BR2_PACKAGE_XORG7||(BR2_PACKAGE_DIRECTFB && BR2_DEPRECATED)
+	# libgtk2 on DirectFB is broken because it is no longer
+	# supported in recent versions of Gtk. However, as it is
+	# likely that support for DirectFB will be re-added in Gtk
+	# 2.22, we are keeping this around until Gtk 2.22 is released.
+	depends on BR2_PACKAGE_XORG7||(BR2_PACKAGE_DIRECTFB && BR2_BROKEN)
 	depends on BR2_USE_WCHAR # glib2
 	depends on BR2_INSTALL_LIBSTDCPP # pango
 	help
package/libgtk2/host-libgtk2-2.20.1-reduce-dependencies.patch renamed from package/libgtk2/host-libgtk2-2.12.12-reduce-dependencies.patch +46 -77
similarity index 58%
rename from package/libgtk2/host-libgtk2-2.12.12-reduce-dependencies.patch
rename to package/libgtk2/host-libgtk2-2.20.1-reduce-dependencies.patch
index f0ac6bf..7e463a9 100644
@@ -1,18 +1,18 @@
-Index: gtk+-2.12.12/configure.in
+Hack the configure.in file to add a "none" gdktarget which removes
+dependencies on graphic backends such as X.org or DirectFB. Gtk does
+not fully build in this mode, but it builds sufficiently to build the
+host tools that are needed to build the target Gtk.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+---
+ configure.in |  101 ++---------------------------------------------------------
+ 1 file changed, 5 insertions(+), 96 deletions(-)
+
+Index: gtk+-2.20.1/configure.in
 ===================================================================
---- gtk+-2.12.12.orig/configure.in	2008-09-13 02:01:07.000000000 +0200
-+++ gtk+-2.12.12/configure.in	2010-02-21 10:42:40.000000000 +0100
-@@ -32,9 +32,6 @@
- 
- # required versions of other packages
- m4_define([glib_required_version], [2.13.5])
--m4_define([pango_required_version], [1.17.3])
--m4_define([atk_required_version], [1.9.0])
--m4_define([cairo_required_version], [1.2.0])
- 
- 
- AC_INIT([gtk+], [gtk_version],
-@@ -239,12 +236,12 @@
+--- gtk+-2.20.1.orig/configure.in
++++ gtk+-2.20.1/configure.in
+@@ -270,12 +270,12 @@
    gdktarget=x11
  fi
 
@@ -27,7 +27,7 @@ Index: gtk+-2.12.12/configure.in
    *) AC_MSG_ERROR([Invalid target for GDK: use x11, quartz, directfb or win32.]);;
  esac
 
-@@ -349,10 +346,7 @@
+@@ -384,10 +384,7 @@
  ## the version requirements since those make the module lists 
  ## annoying to construct
  PKG_CHECK_MODULES(BASE_DEPENDENCIES,
@@ -37,54 +37,21 @@ Index: gtk+-2.12.12/configure.in
 -   cairo >= cairo_required_version])
 +  [glib-2.0 >= glib_required_version])
 
+ ## In addition to checking that cairo is present, we also need to
+ ## check that the correct cairo backend is there. E.g. if the GDK
+@@ -399,8 +396,6 @@
+ if test "x$cairo_backend" = "xx11"; then
+    cairo_backend=xlib
+ fi
+-PKG_CHECK_MODULES(CAIRO_BACKEND,
+-  [cairo-$cairo_backend >= cairo_required_version])
+ 
  if test "$os_win32" != yes; then
      # libtool option to control which symbols are exported
-@@ -1061,7 +1055,7 @@
- GDK_PIXBUF_XLIB_EXTRA_CFLAGS=
- GDK_PIXBUF_XLIB_EXTRA_LIBS=
- 	
--X_PACKAGES=fontconfig
-+X_PACKAGES=
- GDK_EXTRA_LIBS="$GDK_WLIBS"
- GDK_EXTRA_CFLAGS=
- 	
-@@ -1070,14 +1064,6 @@
- GTK_DEP_LIBS_FOR_X=
- 
- if test "x$gdktarget" = "xx11"; then
--  #
--  # We use fontconfig very peripherally when decoding the default
--  # settings.
--  #
--  if $PKG_CONFIG --exists fontconfig; then : ; else
--    AC_MSG_ERROR([
--*** fontconfig (http://www.fontconfig.org) is required by the X11 backend.])
--  fi
- 
-   #
-   # Check for basic X packages; we use pkg-config if available
-@@ -1124,16 +1110,6 @@
-   gtk_save_LIBS=$LIBS
-   LIBS="$x_libs_for_checks $LIBS"
-   
--  # Sanity check for the X11 and Xext libraries. While everything we need from
--  # Xext is optional, the chances a system has *none* of these things is so
--  # small that we just unconditionally require it.
--  AC_CHECK_FUNC(XOpenDisplay, :,
--                AC_MSG_ERROR([*** libX11 not found. Check 'config.log' for more details.]))
--  AC_CHECK_FUNC(XextFindDisplay, :,
--                AC_MSG_ERROR([*** libXext not found. Check 'config.log' for more details.]))
--  AC_CHECK_FUNC(XRenderQueryExtension, :,
--                AC_MSG_ERROR([*** libXrender not found. Check 'config.log' for more details.]))
--
-   # Check for xReply
- 
-   AC_MSG_CHECKING([if <X11/extensions/XIproto.h> is needed for xReply])
-@@ -1418,48 +1394,6 @@
-   AM_CONDITIONAL(USE_DIRECTFB, false)
+@@ -1682,50 +1677,6 @@
  fi
 
--
+ 
 -# Check for Pango flags
 -
 -if test "x$gdktarget" = "xwin32"; then
@@ -122,14 +89,17 @@ Index: gtk+-2.12.12/configure.in
 -CFLAGS="$saved_cflags"
 -LDFLAGS="$saved_ldflags"
 -
--GDK_PACKAGES="$PANGO_PACKAGES"
+-# Pull in gio-unix for GDesktopAppInfo usage, see at least gdkapplaunchcontext-x11.c
 -if test "x$gdktarget" = "xx11"; then
--  GDK_PACKAGES="$GDK_PACKAGES $X_PACKAGES"
+-  GDK_PACKAGES="$PANGO_PACKAGES gio-unix-2.0 $X_PACKAGES cairo-$cairo_backend"
+-else
+-  GDK_PACKAGES="$PANGO_PACKAGES $X_PACKAGES cairo-$cairo_backend"
 -fi
+-
  GDK_DEP_LIBS="$GDK_EXTRA_LIBS `$PKG_CONFIG --libs $GDK_PIXBUF_PACKAGES $GDK_PACKAGES` $GDK_PIXBUF_EXTRA_LIBS"
  GDK_DEP_CFLAGS="`$PKG_CONFIG --cflags  gthread-2.0 $GDK_PIXBUF_PACKAGES $GDK_PACKAGES` $GDK_PIXBUF_EXTRA_CFLAGS $GDK_EXTRA_CFLAGS"
- 
-@@ -1468,7 +1402,7 @@
+ #
+@@ -1733,7 +1684,7 @@
  # into the pkg-config files
  #
  if test $enable_explicit_deps != yes ; then
@@ -138,14 +108,14 @@ Index: gtk+-2.12.12/configure.in
    GDK_EXTRA_LIBS=
  fi
 
-@@ -1479,39 +1413,10 @@
+@@ -1744,36 +1695,8 @@
  AC_SUBST(GDK_DEP_CFLAGS)
 
 
 -########################################
 -# Check for Accessibility Toolkit flags
 -########################################
--
+ 
 -ATK_PACKAGES=atk
 -AC_MSG_CHECKING(ATK flags)
 -if $PKG_CONFIG --exists $ATK_PACKAGES ; then
@@ -171,20 +141,15 @@ Index: gtk+-2.12.12/configure.in
 -        LIBS="$gtk_save_LIBS"
 -fi
 -
--GTK_PACKAGES="atk cairo"
+-GTK_PACKAGES="atk cairo gio-2.0"
 +GTK_PACKAGES=
- GTK_EXTRA_LIBS=
- GTK_EXTRA_CFLAGS= 
--GTK_DEP_LIBS="$GDK_EXTRA_LIBS $GTK_DEP_LIBS_FOR_X `$PKG_CONFIG --libs $GDK_PIXBUF_PACKAGES $PANGO_PACKAGES $GTK_PACKAGES_FOR_X $GTK_PACKAGES` $GTK_EXTRA_LIBS $GDK_PIXBUF_EXTRA_LIBS"
-+GTK_DEP_LIBS="$GDK_EXTRA_LIBS $GTK_DEP_LIBS_FOR_X `$PKG_CONFIG --libs $GDK_PIXBUF_PACKAGES $GTK_PACKAGES_FOR_X $GTK_PACKAGES` $GTK_EXTRA_LIBS $GDK_PIXBUF_EXTRA_LIBS"
- GTK_DEP_CFLAGS="`$PKG_CONFIG --cflags  gthread-2.0 $GDK_PIXBUF_PACKAGES $GDK_PACKAGES $GTK_PACKAGES` $GDK_PIXBUF_EXTRA_CFLAGS $GDK_EXTRA_CFLAGS $GTK_EXTRA_CFLAGS"
- 
- if test x"$os_win32" = xyes; then
-@@ -1601,17 +1506,6 @@
- 
+ if test "x$gdktarget" = "xx11"; then
+   GTK_PACKAGES="$GTK_PACKAGES pangoft2"
+ fi
+@@ -1936,20 +1859,6 @@
  gtk_save_cppflags="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $GTK_DEP_CFLAGS"
--			  
+ CPPFLAGS="$CPPFLAGS $GTK_DEP_CFLAGS $GDK_DEP_CFLAGS"
+ 
 -AC_CHECK_HEADER(cairo-pdf.h,,AC_MSG_ERROR([
 -*** Can't find cairo-pdf.h. You must build Cairo with the pdf
 -*** backend enabled.]))
@@ -193,6 +158,10 @@ Index: gtk+-2.12.12/configure.in
 -  AC_CHECK_HEADER(cairo-ps.h,,AC_MSG_ERROR([
 -*** Can't find cairo-ps.h. You must build Cairo with the 
 -*** postscript backend enabled.]))
+-
+-  AC_CHECK_HEADER(cairo-svg.h,,AC_MSG_ERROR([
+-*** Can't find cairo-svg.h. You must build Cairo with the
+-*** svg backend enabled.]))
 -fi   
 -
  CPPFLAGS="$gtk_save_cppflags"
package/libgtk2/libgtk2-2.12.6-configure.patch deleted +0 -256
deleted file mode 100644
index ea60d2d..0000000
@@ -1,256 +0,0 @@
-diff -urN libgtk2-2.12.6-0rig/configure libgtk2-2.12.6/configure
---- libgtk2-2.12.6-0rig/configure	2008-01-29 04:38:14.000000000 +0100
-+++ libgtk2-2.12.6/configure	2008-07-08 10:54:39.000000000 +0200
-@@ -5094,7 +5094,7 @@
-   ;;
- 
- # This must be Linux ELF.
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-@@ -6973,7 +6973,7 @@
-   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-   ;;
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   if test "$host_cpu" = ia64; then
-     symcode='[ABCDGIRSTW]'
-     lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-@@ -7943,7 +7943,7 @@
-       lt_prog_compiler_static='-Bstatic'
-       ;;
- 
--    linux* | k*bsd*-gnu)
-+    *-linux-gnu | linux* | k*bsd*-gnu)
-       case $cc_basename in
-       icc* | ecc*)
- 	lt_prog_compiler_wl='-Wl,'
-@@ -8402,7 +8402,7 @@
-       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
- 
--    gnu* | linux* | k*bsd*-gnu)
-+    *-linux-gnu | gnu* | linux* | k*bsd*-gnu)
-       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- 	tmp_addflag=
- 	case $cc_basename,$host_cpu in
-@@ -9336,6 +9336,7 @@
-   if (lt_freq[lt_foo] == 1) { print lt_foo; }
- }'`
-   sys_lib_search_path_spec=`echo $lt_search_path_spec`
-+
- else
-   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
- fi
-@@ -9667,8 +9668,9 @@
-   dynamic_linker=no
-   ;;
- 
-+
- # This must be Linux ELF.
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-@@ -9681,8 +9683,22 @@
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
--  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
--  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  #  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+  # Buildroot: New sys_lib_search_path_spec taken from atk!
-+if test "$GCC" = yes; then
-+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
- 
-   # Append ld.so.conf contents to the search path
-   if test -f /etc/ld.so.conf; then
-@@ -10780,6 +10796,7 @@
-   # Now quote all the things that may contain metacharacters while being
-   # careful not to overquote the AC_SUBSTed values.  We take copies of the
-   # variables and quote the copies for generation of the libtool script.
-+
-   for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-     SED SHELL STRIP \
-     libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-@@ -12109,7 +12126,7 @@
-     hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-     hardcode_libdir_separator_CXX=:
-     ;;
--  linux* | k*bsd*-gnu)
-+  *-linux-gnu | linux* | k*bsd*-gnu)
-     case $cc_basename in
-       KCC*)
- 	# Kuck and Associates, Inc. (KAI) C++ Compiler
-@@ -12680,7 +12697,7 @@
-   postdeps_CXX=
-   ;;
- 
--linux*)
-+*-linux-gnu | linux*)
-   case `$CC -V 2>&1 | sed 5q` in
-   *Sun\ C*)
-     # Sun C++ 5.9
-@@ -12884,7 +12901,7 @@
- 	    ;;
- 	esac
- 	;;
--      linux* | k*bsd*-gnu)
-+      *-linux-gnu | linux* | k*bsd*-gnu)
- 	case $cc_basename in
- 	  KCC*)
- 	    # KAI C++ Compiler
-@@ -13636,7 +13653,7 @@
-   ;;
- 
- # This must be Linux ELF.
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-@@ -13649,7 +13666,24 @@
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
--  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+
-+  # sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  # Buildroot: New sys_lib_search_path_spec taken from atk!
-+if test "$GCC" = yes; then
-+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+
-   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- 
-   # Append ld.so.conf contents to the search path
-@@ -14586,7 +14620,7 @@
-       lt_prog_compiler_static_F77='-Bstatic'
-       ;;
- 
--    linux* | k*bsd*-gnu)
-+    *-linux-gnu | linux* | k*bsd*-gnu)
-       case $cc_basename in
-       icc* | ecc*)
- 	lt_prog_compiler_wl_F77='-Wl,'
-@@ -15045,7 +15079,7 @@
-       archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
- 
--    gnu* | linux* | k*bsd*-gnu)
-+    gnu* | *-linux-gnu | linux* | k*bsd*-gnu)
-       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- 	tmp_addflag=
- 	case $cc_basename,$host_cpu in
-@@ -16239,7 +16273,7 @@
-   ;;
- 
- # This must be Linux ELF.
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-@@ -16252,7 +16286,23 @@
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
--  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  # sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  # Buildroot: New sys_lib_search_path_spec taken from atk!
-+if test "$GCC" = yes; then
-+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+
-   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- 
-   # Append ld.so.conf contents to the search path
-@@ -17169,7 +17219,7 @@
-       lt_prog_compiler_static_GCJ='-Bstatic'
-       ;;
- 
--    linux* | k*bsd*-gnu)
-+    *-linux-gnu | linux* | k*bsd*-gnu)
-       case $cc_basename in
-       icc* | ecc*)
- 	lt_prog_compiler_wl_GCJ='-Wl,'
-@@ -17628,7 +17678,7 @@
-       archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
- 
--    gnu* | linux* | k*bsd*-gnu)
-+    gnu* | *-linux-gnu | linux* | k*bsd*-gnu)
-       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- 	tmp_addflag=
- 	case $cc_basename,$host_cpu in
-@@ -18842,7 +18892,7 @@
-   ;;
- 
- # This must be Linux ELF.
--linux* | k*bsd*-gnu)
-+*-linux-gnu | linux* | k*bsd*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-@@ -18855,7 +18905,22 @@
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
--  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  #sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+  # Buildroot: New sys_lib_search_path_spec taken from atk!
-+if test "$GCC" = yes; then
-+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+    # if the path contains ";" then we assume it to be the separator
-+    # otherwise default to the standard path separator (i.e. ":") - it is
-+    # assumed that no part of a normal pathname contains ";" but that should
-+    # okay in the real world where ";" in dirpaths is itself problematic.
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+  else
-+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-+  fi
-+else
-+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- 
-   # Append ld.so.conf contents to the search path
package/libgtk2/libgtk2-2.12.6-no-tests.patch deleted +0 -11
deleted file mode 100644
index ea92433..0000000
@@ -1,11 +0,0 @@
---- a/Makefile.in	2008-01-28 22:38:09.000000000 -0500
-+++ b/Makefile.in	2008-02-11 12:52:45.000000000 -0500
-@@ -330,7 +330,7 @@ sharedstatedir = @sharedstatedir@
- sysconfdir = @sysconfdir@
- target_alias = @target_alias@
- 
--SRC_SUBDIRS = gdk-pixbuf gdk gtk modules demos tests perf contrib
-+SRC_SUBDIRS = gdk-pixbuf gdk gtk modules demos perf contrib
- SUBDIRS = po po-properties $(SRC_SUBDIRS) docs m4macros
- 
- # require automake 1.4
package/libgtk2/libgtk2-2.20.1-libtool.patch new file +60 -0
new file mode 100644
index 0000000..12b69a4
@@ -0,0 +1,60 @@
+Fix the usual libtool-related problems, but since libgtk2 uses libtool
+2.2, we need a specific patch.
+
+This is an exact copy of the patch proposed by Martin Banky.
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+
+--- a/ltmain.sh	2006-03-11 13:49:04.000000000 -0500
++++ b/ltmain.sh	2008-04-30 09:55:28.000000000 -0400
+@@ -2239,8 +2239,11 @@ func_mode_install ()
+ 	  # At present, this check doesn't affect windows .dll's that
+ 	  # are installed into $libdir/../bin (currently, that works fine)
+ 	  # but it's something to keep an eye on.
+-	  test "$inst_prefix_dir" = "$destdir" && \
+-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
++	  #
++	  # This breaks install into our staging area.  -PB
++	  #
++	  # test "$inst_prefix_dir" = "$destdir" && \
++	  #   func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ 
+ 	  if test -n "$inst_prefix_dir"; then
+ 	    # Stick the inst_prefix_dir data into the link command.
+@@ -5739,8 +5742,14 @@ func_mode_link ()
+ 	    absdir="$abs_ladir"
+ 	    libdir="$abs_ladir"
+ 	  else
+-	    dir="$libdir"
+-	    absdir="$libdir"
++            # Adding 'libdir' from the .la file to our library search paths
++            # breaks crosscompilation horribly.  We cheat here and don't add
++            # it, instead adding the path where we found the .la.  -CL
++	    dir="$abs_ladir"
++	    absdir="$abs_ladir"
++	    libdir="$abs_ladir"
++	    #dir="$libdir"
++	    #absdir="$libdir"
+ 	  fi
+ 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ 	else
+@@ -5891,7 +5900,7 @@ func_mode_link ()
+ 	  *)
+ 	    if test "$installed" = no; then
+ 	      notinst_deplibs="$notinst_deplibs $lib"
+-	      need_relink=yes
++	      need_relink=no
+ 	    fi
+ 	    ;;
+ 	  esac
+@@ -8373,6 +8382,10 @@ func_mode_link ()
+ 	    # Replace all uninstalled libtool libraries with the installed ones
+ 	    newdependency_libs=
+ 	    for deplib in $dependency_libs; do
++              # Replacing uninstalled with installed can easily break crosscompilation,
++              # since the installed path is generally the wrong architecture.  -CL
++              newdependency_libs="$newdependency_libs $deplib"
++              continue
+ 	      case $deplib in
+ 	      *.la)
+ 		func_basename "$deplib"
package/libgtk2/libgtk2.mk +6 -8
index d669622..a2321d1 100644
@@ -3,8 +3,8 @@
 # libgtk2.0
 #
 #############################################################
-LIBGTK2_VERSION_MAJOR:=2.12
-LIBGTK2_VERSION_MINOR:=12
+LIBGTK2_VERSION_MAJOR:=2.20
+LIBGTK2_VERSION_MINOR:=1
 LIBGTK2_VERSION = $(LIBGTK2_VERSION_MAJOR).$(LIBGTK2_VERSION_MINOR)
 
 LIBGTK2_SOURCE = gtk+-$(LIBGTK2_VERSION).tar.bz2
@@ -12,6 +12,7 @@ LIBGTK2_SITE = ftp://ftp.gtk.org/pub/gtk/$(LIBGTK2_VERSION_MAJOR)
 LIBGTK2_AUTORECONF = NO
 LIBGTK2_INSTALL_STAGING = YES
 LIBGTK2_INSTALL_TARGET = YES
+LIBGTK2_LIBTOOL_PATCH = NO
 
 LIBGTK2_CONF_ENV = ac_cv_func_posix_getpwuid_r=yes glib_cv_stack_grows=no \
 		glib_cv_uscore=no \
@@ -64,7 +65,8 @@ LIBGTK2_CONF_ENV = ac_cv_func_posix_getpwuid_r=yes glib_cv_stack_grows=no \
 		ac_cv_path_GTK_UPDATE_ICON_CACHE=$(HOST_DIR)/usr/bin/gtk-update-icon-cache \
 		ac_cv_path_GDK_PIXBUF_CSOURCE=$(HOST_DIR)/usr/bin/gdk-pixbuf-csource \
 		ac_cv_prog_F77=no \
-		ac_cv_path_CUPS_CONFIG=no
+		ac_cv_path_CUPS_CONFIG=no \
+		gio_can_sniff=no
 
 LIBGTK2_CONF_OPT = --enable-shared \
 		--enable-static \
@@ -90,11 +92,6 @@ else
 	LIBGTK2_CONF_OPT += --without-x
 endif
 
-# Buildroot does not support JPEG2000 library
-ifeq ($(LIBGTK2_VERSION_MAJOR),2.15)
-LIBGTK2_CONF_OPT += --without-libjasper
-endif
-
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 LIBGTK2_DEPENDENCIES += libpng
 else
@@ -135,6 +132,7 @@ LIBGTK2_POST_INSTALL_TARGET_HOOKS += LIBGTK_POST_INSTALL_TWEAKS
 
 HOST_LIBGTK2_DEPENDENCIES = host-libglib2 host-libpng
 HOST_LIBGTK2_AUTORECONF = YES
+HOST_LIBGTK2_LIBTOOL_PATCH = NO
 HOST_LIBGTK2_CONF_OPT = \
 		--disable-static \
 		--disable-glibtest \
#8 lore raw

PATCH 2/3 libglib2: bump version to 2.24.2

In reply to Thomas Petazzoni

Just for information, Glib 2.26 has been released 2 days ago.

Le mercredi 29 septembre 2010 ? 00:12 +0200, Thomas Petazzoni a ?crit :

Quoted 20 lines

This is a mechanical bump, no other changes involved.

---
 package/libglib2/libglib2.mk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
package/libglib2/libglib2.mk +1 -1
index 61e8c1c..e45e89c 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 LIBGLIB2_VERSION_MAJOR = 2.24
-LIBGLIB2_VERSION_MINOR = 1
+LIBGLIB2_VERSION_MINOR = 2
 LIBGLIB2_VERSION = $(LIBGLIB2_VERSION_MAJOR).$(LIBGLIB2_VERSION_MINOR)
 LIBGLIB2_SOURCE = glib-$(LIBGLIB2_VERSION).tar.bz2
 LIBGLIB2_SITE = http://ftp.gnome.org/pub/gnome/sources/glib/$(LIBGLIB2_VERSION_MAJOR)
#3 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

In reply to Lionel Landwerlin
Quoted 4 lines · On Wed, 29 Sep 2010 01:28:40 +0200 Lionel Landwerlin <[email protected]>…

Gtk+ 2.22 has been released early this week, it brings back compiling/quite-good-working DirectFB backend.

Would you consider bumping to 2.22 ?

Argh, I checked http://www.gtk.org/download-linux.html yesterday, and it still advertise Gtk 2.20 and Glib 2.24.

I will bump those versions, yes, and mark the DirectFB support as working again.

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> On Wed, 29 Sep 2010 01:28:40 +0200

Quoted 4 lines · Thomas> Lionel Landwerlin <[email protected]> wrote:
Quoted 4 lines

Gtk+ 2.22 has been released early this week, it brings back compiling/quite-good-working DirectFB backend.

Would you consider bumping to 2.22 ?

Thomas> Argh, I checked http://www.gtk.org/download-linux.html yesterday, and Thomas> it still advertise Gtk 2.20 and Glib 2.24.

Thomas> I will bump those versions, yes, and mark the DirectFB support as Thomas> working again.

Ok, I'll put your pull request on hold for now then. Please resend once ready.

Signature · 1 line
Bye, Peter Korsgaard
#5 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

Quoted 8 lines · On Thu, 30 Sep 2010 14:35:19 +0200 Peter Korsgaard <[email protected]> wrote:

Thomas> Argh, I checked http://www.gtk.org/download-linux.html
Thomas> yesterday, and it still advertise Gtk 2.20 and Glib 2.24.

Thomas> I will bump those versions, yes, and mark the DirectFB Thomas> support as working again.

Ok, I'll put your pull request on hold for now then. Please resend once ready.

Unfortunately, things are not that simple.

In order to reduce the number of dependencies needed to build host-libgtk2 (in which a few tools are needed to build the target libgtk2), we apply a patch to libgtk2 configure.in file. Applying a patch to the configure.in obviously means that host-libgtk2 needs to be auto-reconfigured.

However, libgtk2 2.22 now requires libtool 2.2, and we only have libtool 1.5. So unless we upgrade libtool to 2.2, it is not possible to autoreconfigure libgtk2 and therefore not possible to apply a patch to its configure.in file.

We *really* need to take a decision on the libtool stuff. I've sent a summary of the two proposals and would like to see some more reactions to it in order to move forward on this topic.

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#6 lore raw

PATCH 1/3 libgtk2: bump to version 2.20.1 and mark Gtk/DirectFB as broken

Thomas,
Do you have a config file that I can use to build libgtk2? I have
gtk2-engines converted to autotargets, and I need to test it, but I don't know how to build an X server.

Thanks,

Martin

Quoted 31 lines · Thomas Petazzoni
Quoted 8 lines · On Thu, 30 Sep 2010 14:35:19 +0200 Peter Korsgaard <[email protected]> wrote:

Thomas> Argh, I checked http://www.gtk.org/download-linux.html
Thomas> yesterday, and it still advertise Gtk 2.20 and Glib 2.24.

Thomas> I will bump those versions, yes, and mark the DirectFB Thomas> support as working again.

Ok, I'll put your pull request on hold for now then. Please resend once ready.

Unfortunately, things are not that simple.

In order to reduce the number of dependencies needed to build host-libgtk2 (in which a few tools are needed to build the target libgtk2), we apply a patch to libgtk2 configure.in file. Applying a patch to the configure.in obviously means that host-libgtk2 needs to be auto-reconfigured.

However, libgtk2 2.22 now requires libtool 2.2, and we only have libtool 1.5. So unless we upgrade libtool to 2.2, it is not possible to autoreconfigure libgtk2 and therefore not possible to apply a patch to its configure.in file.

We *really* need to take a decision on the libtool stuff. I've sent a summary of the two proposals and would like to see some more reactions to it in order to move forward on this topic.

Thanks!

Quoted 11 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20101004/b589699d/attachment.html>