update makefiles to use the newer flag variables
Subsystems (37)
cover update makefiles to use the newer flag variables
Hi Michal,
These are the patches that never made their way into the linux-next tree. I have added all of the acks that came through.
Thanks,
matt
matt mooney (27):
kernel: change to new flag variable
alpha: change to new flag variables
arm: change to new flag variables
h8300: change to new flag variable
ia64: change to new flag variables
m68k: change to new flag variables
microblaze: change to new flag variable
mips: change to new flag variable
s390: change to new flag variable
um: change to new flag variables
xtensa: change to new flag variable
fs: change to new flag variable
char: change to new flag variable
dma: change to new flag variable
hwmon: change to new flag variable
ide: change to new flag variable
ieee802154: change to new flag variable
isdn: change to new flag variable
memstick: change to new flag variable
message: change to new flag variable
misc: change to new flag variable
net: change to new flag variable
pps: change to new flag variable
rapidio: change to new flag variable
rtc: change to new flag variable
scsi: change to new flag variable
video: change to new flag variable
arch/alpha/kernel/Makefile | 4 ++-- arch/alpha/lib/Makefile | 4 ++-- arch/alpha/math-emu/Makefile | 2 +- arch/alpha/mm/Makefile | 2 +- arch/alpha/oprofile/Makefile | 2 +- arch/arm/boot/compressed/Makefile | 4 ++-- arch/arm/vfp/Makefile | 4 ++-- arch/h8300/boot/compressed/Makefile | 2 +- arch/ia64/kvm/Makefile | 4 ++-- arch/ia64/sn/kernel/Makefile | 2 +- arch/ia64/sn/kernel/sn2/Makefile | 2 +- arch/ia64/sn/pci/Makefile | 2 +- arch/ia64/sn/pci/pcibr/Makefile | 2 +- arch/ia64/uv/kernel/Makefile | 2 +- arch/m68k/math-emu/Makefile | 4 ++-- arch/microblaze/kernel/cpu/Makefile | 2 +- arch/mips/Makefile | 4 ++-- arch/mips/bcm63xx/boards/Makefile | 2 +- arch/mips/fw/arc/Makefile | 2 +- arch/mips/jz4740/Makefile | 2 +- arch/mips/oprofile/Makefile | 2 +- arch/mips/pmc-sierra/yosemite/Makefile | 2 +- arch/mips/powertv/Makefile | 2 +- arch/mips/powertv/asic/Makefile | 2 +- arch/mips/powertv/pci/Makefile | 2 +- arch/s390/boot/Makefile | 2 +- arch/s390/kvm/Makefile | 2 +- arch/s390/math-emu/Makefile | 2 +- arch/um/sys-ppc/Makefile | 10 +++++----- arch/xtensa/boot/Makefile | 2 +- arch/xtensa/boot/lib/Makefile | 2 +- drivers/char/mwave/Makefile | 4 ++-- drivers/char/mwave/README | 2 +- drivers/dma/Makefile | 8 ++------ drivers/hwmon/Makefile | 4 +--- drivers/ide/Makefile | 2 +- drivers/ieee802154/Makefile | 2 +- drivers/isdn/hisax/Makefile | 2 +- drivers/memstick/Makefile | 4 +--- drivers/memstick/core/Makefile | 4 ---- drivers/memstick/host/Makefile | 4 ---- drivers/message/fusion/Makefile | 2 +- drivers/misc/cb710/Makefile | 4 +--- drivers/misc/sgi-gru/Makefile | 4 +--- drivers/net/caif/Makefile | 4 +--- drivers/net/skfp/Makefile | 2 +- drivers/net/wan/lmc/Makefile | 2 +- drivers/net/wireless/hostap/hostap_config.h | 4 ++-- drivers/net/wireless/zd1211rw/Makefile | 4 +--- drivers/pps/clients/Makefile | 4 +--- drivers/rapidio/Makefile | 4 +--- drivers/rapidio/switches/Makefile | 4 ----- drivers/rtc/Makefile | 4 +--- drivers/scsi/aacraid/Makefile | 2 +- drivers/scsi/aic94xx/Makefile | 4 +--- drivers/scsi/libsas/Makefile | 6 ++---- drivers/scsi/lpfc/Makefile | 6 ++---- drivers/scsi/mvsas/Makefile | 4 +--- drivers/scsi/pcmcia/Makefile | 2 +- drivers/video/intelfb/Makefile | 5 +---- fs/affs/Makefile | 2 +- fs/coda/Makefile | 2 +- fs/gfs2/Makefile | 2 +- fs/jfs/Makefile | 2 +- fs/ncpfs/Makefile | 2 +- fs/ntfs/Makefile | 19 +++++++------------ fs/ocfs2/Makefile | 4 ++-- fs/ocfs2/dlm/Makefile | 2 +- fs/ocfs2/dlmfs/Makefile | 2 +- fs/reiserfs/Makefile | 4 +--- fs/xfs/Makefile | 7 ++----- kernel/gcov/Makefile | 2 +- kernel/power/Makefile | 3 ++- 73 files changed, 95 insertions(+), 149 deletions(-)
Signature · 1 line
1.7.3.4
PATCH RESEND 1/27 kernel: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.
--- kernel/gcov/Makefile | 2 +- kernel/power/Makefile | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)
kernel/gcov/Makefile +1 -1
@@ -1,3 +1,3 @@ -EXTRA_CFLAGS := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"' +ccflags-y := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"' obj-$(CONFIG_GCOV_KERNEL) := base.o fs.o gcc_3_4.o
kernel/power/Makefile +2 -1
@@ -1,4 +1,5 @@ -ccflags-$(CONFIG_PM_DEBUG) := -DDEBUG + +ccflags-$(CONFIG_PM_DEBUG) := -DDEBUG obj-$(CONFIG_PM) += main.o obj-$(CONFIG_PM_SLEEP) += console.o
Signature · 1 line
1.7.3.4
PATCH RESEND 2/27 alpha: change to new flag variables
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/alpha/kernel/Makefile | 4 ++-- arch/alpha/lib/Makefile | 4 ++-- arch/alpha/math-emu/Makefile | 2 +- arch/alpha/mm/Makefile | 2 +- arch/alpha/oprofile/Makefile | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-)
arch/alpha/kernel/Makefile +2 -2
@@ -3,8 +3,8 @@ # extra-y := head.o vmlinux.lds -EXTRA_AFLAGS := $(KBUILD_CFLAGS) -EXTRA_CFLAGS := -Werror -Wno-sign-compare +asflags-y := $(KBUILD_CFLAGS) +ccflags-y := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \
arch/alpha/lib/Makefile +2 -2
@@ -2,8 +2,8 @@ # Makefile for alpha-specific library files.. # -EXTRA_AFLAGS := $(KBUILD_CFLAGS) -EXTRA_CFLAGS := -Werror +asflags-y := $(KBUILD_CFLAGS) +ccflags-y := -Werror # Many of these routines have implementations tuned for ev6. # Choose them iff we're targeting ev6 specifically.
arch/alpha/math-emu/Makefile +1 -1
@@ -2,7 +2,7 @@ # Makefile for the FPU instruction emulation. # -EXTRA_CFLAGS := -w +ccflags-y := -w obj-$(CONFIG_MATHEMU) += math-emu.o
arch/alpha/mm/Makefile +1 -1
@@ -2,7 +2,7 @@ # Makefile for the linux alpha-specific parts of the memory manager. # -EXTRA_CFLAGS := -Werror +ccflags-y := -Werror obj-y := init.o fault.o extable.o
arch/alpha/oprofile/Makefile +1 -1
@@ -1,4 +1,4 @@ -EXTRA_CFLAGS := -Werror -Wno-sign-compare +ccflags-y := -Werror -Wno-sign-compare obj-$(CONFIG_OPROFILE) += oprofile.o
Signature · 1 line
1.7.3.4
PATCH RESEND 3/27 arm: change to new flag variables
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/arm/boot/compressed/Makefile | 4 ++-- arch/arm/vfp/Makefile | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/boot/compressed/Makefile +2 -2
@@ -80,8 +80,8 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif -EXTRA_CFLAGS := -fpic -fno-builtin -EXTRA_AFLAGS := -Wa,-march=all +ccflags-y := -fpic -fno-builtin +asflags-y := -Wa,-march=all # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y)
arch/arm/vfp/Makefile +2 -2
@@ -4,8 +4,8 @@ # Copyright (C) 2001 ARM Limited # -# EXTRA_CFLAGS := -DDEBUG -# EXTRA_AFLAGS := -DDEBUG +# ccflags-y := -DDEBUG +# asflags-y := -DDEBUG KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) LDFLAGS +=--no-warn-mismatch
Signature · 1 line
1.7.3.4
PATCH RESEND 4/27 h8300: change to new flag variable
In reply to matt mooneyReplace EXTRA_AFLAGS with asflags-y.
--- arch/h8300/boot/compressed/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/h8300/boot/compressed/Makefile +1 -1
@@ -5,7 +5,7 @@ # targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional +asflags-y := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o
Signature · 1 line
1.7.3.4
PATCH RESEND 5/27 ia64: change to new flag variables
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/ia64/kvm/Makefile | 4 ++-- arch/ia64/sn/kernel/Makefile | 2 +- arch/ia64/sn/kernel/sn2/Makefile | 2 +- arch/ia64/sn/pci/Makefile | 2 +- arch/ia64/sn/pci/pcibr/Makefile | 2 +- arch/ia64/uv/kernel/Makefile | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-)
arch/ia64/kvm/Makefile +2 -2
@@ -45,8 +45,8 @@ FORCE : $(obj)/$(offsets-file) # Makefile for Kernel-based Virtual Machine module # -EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/ -EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/ +ccflags-y := -Ivirt/kvm -Iarch/ia64/kvm/ +asflags-y := -Ivirt/kvm -Iarch/ia64/kvm/ common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \ coalesced_mmio.o irq_comm.o assigned-dev.o)
arch/ia64/sn/kernel/Makefile +1 -1
@@ -7,7 +7,7 @@ # Copyright (C) 1999,2001-2006,2008 Silicon Graphics, Inc. All Rights Reserved. # -EXTRA_CFLAGS += -Iarch/ia64/sn/include +ccflags-y := -Iarch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ huberror.o io_acpi_init.o io_common.o \
arch/ia64/sn/kernel/sn2/Makefile +1 -1
@@ -9,7 +9,7 @@ # sn2 specific kernel files # -EXTRA_CFLAGS += -Iarch/ia64/sn/include +ccflags-y := -Iarch/ia64/sn/include obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \ prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o
arch/ia64/sn/pci/Makefile +1 -1
@@ -7,6 +7,6 @@ # # Makefile for the sn pci general routines. -EXTRA_CFLAGS += -Iarch/ia64/sn/include +ccflags-y := -Iarch/ia64/sn/include obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/
arch/ia64/sn/pci/pcibr/Makefile +1 -1
@@ -7,7 +7,7 @@ # # Makefile for the sn2 io routines. -EXTRA_CFLAGS += -Iarch/ia64/sn/include +ccflags-y := -Iarch/ia64/sn/include obj-y += pcibr_dma.o pcibr_reg.o \ pcibr_ate.o pcibr_provider.o
arch/ia64/uv/kernel/Makefile +1 -1
@@ -7,7 +7,7 @@ # Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved. # -EXTRA_CFLAGS += -Iarch/ia64/sn/include +ccflags-y := -Iarch/ia64/sn/include obj-y += setup.o obj-$(CONFIG_IA64_GENERIC) += machvec.o
Signature · 1 line
1.7.3.4
PATCH RESEND 6/27 m68k: change to new flag variables
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/m68k/math-emu/Makefile | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
arch/m68k/math-emu/Makefile +2 -2
@@ -2,8 +2,8 @@ # Makefile for the linux kernel. # -#EXTRA_AFLAGS += -DFPU_EMU_DEBUG -#EXTRA_CFLAGS += -DFPU_EMU_DEBUG +#asflags-y := -DFPU_EMU_DEBUG +#ccflags-y := -DFPU_EMU_DEBUG obj-y := fp_entry.o fp_scan.o fp_util.o fp_move.o fp_movem.o \ fp_cond.o fp_arith.o fp_log.o fp_trig.o
Signature · 1 line
1.7.3.4
PATCH RESEND 7/27 microblaze: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- arch/microblaze/kernel/cpu/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/microblaze/kernel/cpu/Makefile +1 -1
@@ -6,7 +6,7 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_cache.o = -pg endif -EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ +ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ -DCPU_REV=$(CPU_REV) obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o
Signature · 1 line
1.7.3.4
PATCH RESEND 8/27 mips: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- arch/mips/Makefile | 4 ++-- arch/mips/bcm63xx/boards/Makefile | 2 +- arch/mips/fw/arc/Makefile | 2 +- arch/mips/jz4740/Makefile | 2 +- arch/mips/oprofile/Makefile | 2 +- arch/mips/pmc-sierra/yosemite/Makefile | 2 +- arch/mips/powertv/Makefile | 2 +- arch/mips/powertv/asic/Makefile | 2 +- arch/mips/powertv/pci/Makefile | 2 +- 9 files changed, 10 insertions(+), 10 deletions(-)
arch/mips/Makefile +2 -2
@@ -286,11 +286,11 @@ CLEAN_FILES += vmlinux.32 vmlinux.64 archprepare: ifdef CONFIG_MIPS32_N32 @echo ' Checking missing-syscalls for N32' - $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=n32" + $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32" endif ifdef CONFIG_MIPS32_O32 @echo ' Checking missing-syscalls for O32' - $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=32" + $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32" endif install:
arch/mips/bcm63xx/boards/Makefile +1 -1
@@ -1,3 +1,3 @@ obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -EXTRA_CFLAGS += -Werror +ccflags-y := -Werror
arch/mips/fw/arc/Makefile +1 -1
@@ -9,4 +9,4 @@ lib-$(CONFIG_ARC_MEMORY) += memory.o lib-$(CONFIG_ARC_CONSOLE) += arc_con.o lib-$(CONFIG_ARC_PROMLIB) += promlib.o -EXTRA_CFLAGS += -Werror +ccflags-y := -Werror
arch/mips/jz4740/Makefile +1 -1
@@ -17,4 +17,4 @@ obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o obj-$(CONFIG_PM) += pm.o -EXTRA_CFLAGS += -Werror -Wall +ccflags-y := -Werror -Wall
arch/mips/oprofile/Makefile +1 -1
@@ -1,4 +1,4 @@ -EXTRA_CFLAGS := -Werror +ccflags-y := -Werror obj-$(CONFIG_OPROFILE) += oprofile.o
arch/mips/pmc-sierra/yosemite/Makefile +1 -1
@@ -6,4 +6,4 @@ obj-y += irq.o prom.o py-console.o setup.o obj-$(CONFIG_SMP) += smp.o -EXTRA_CFLAGS += -Werror +ccflags-y := -Werror
arch/mips/powertv/Makefile +1 -1
@@ -28,4 +28,4 @@ obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \ obj-$(CONFIG_USB) += powertv-usb.o -EXTRA_CFLAGS += -Wall +ccflags-y := -Wall
arch/mips/powertv/asic/Makefile +1 -1
@@ -20,4 +20,4 @@ obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \ asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \ prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o -EXTRA_CFLAGS += -Wall -Werror +ccflags-y := -Wall -Werror
arch/mips/powertv/pci/Makefile +1 -1
@@ -18,4 +18,4 @@ obj-$(CONFIG_PCI) += fixup-powertv.o -EXTRA_CFLAGS += -Wall -Werror +ccflags-y := -Wall -Werror
Signature · 1 line
1.7.3.4
PATCH RESEND 9/27 s390: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- arch/s390/boot/Makefile | 2 +- arch/s390/kvm/Makefile | 2 +- arch/s390/math-emu/Makefile | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
arch/s390/boot/Makefile +1 -1
@@ -6,7 +6,7 @@ COMPILE_VERSION := __linux_compile_version_id__`hostname | \ tr -c '[0-9A-Za-z]' '_'`__`date | \ tr -c '[0-9A-Za-z]' '_'`_t -EXTRA_CFLAGS := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I. +ccflags-y := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I. targets := image targets += bzImage
arch/s390/kvm/Makefile +1 -1
@@ -8,7 +8,7 @@ common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o) -EXTRA_CFLAGS += -Ivirt/kvm -Iarch/s390/kvm +ccflags-y := -Ivirt/kvm -Iarch/s390/kvm kvm-objs := $(common-objs) kvm-s390.o sie64a.o intercept.o interrupt.o priv.o sigp.o diag.o obj-$(CONFIG_KVM) += kvm.o
arch/s390/math-emu/Makefile +1 -1
@@ -4,4 +4,4 @@ obj-$(CONFIG_MATHEMU) := math.o -EXTRA_CFLAGS := -I$(src) -Iinclude/math-emu -w +ccflags-y := -I$(src) -Iinclude/math-emu -w
Signature · 1 line
1.7.3.4
PATCH RESEND 10/27 um: change to new flag variables
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/um/sys-ppc/Makefile | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-)
arch/um/sys-ppc/Makefile +5 -5
@@ -6,7 +6,7 @@ OBJ = built-in.o OBJS = ptrace.o sigcontext.o checksum.o miscthings.o misc.o \ ptrace_user.o sysrq.o -EXTRA_AFLAGS := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel +asflags-y := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel all: $(OBJ)
@@ -15,10 +15,10 @@ $(OBJ): $(OBJS) $(LD) $(LINKFLAGS) --start-group $^ --end-group -o $@ ptrace_user.o: ptrace_user.c - $(CC) -D__KERNEL__ $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $< + $(CC) -D__KERNEL__ $(USER_CFLAGS) $(ccflags-y) -c -o $@ $< sigcontext.o: sigcontext.c - $(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $< + $(CC) $(USER_CFLAGS) $(ccflags-y) -c -o $@ $< checksum.S: rm -f $@
@@ -53,13 +53,13 @@ ppc_defs.h: mk_defs.c ppc_defs.head \ checksum.o: checksum.S rm -f asm ln -s $(srctree)/include/asm-ppc asm - $(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o + $(CC) $(asflags-y) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o rm -f asm misc.o: misc.S ppc_defs.h rm -f asm ln -s $(srctree)/include/asm-ppc asm - $(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o + $(CC) $(asflags-y) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o rm -f asm clean-files := $(OBJS) ppc_defs.h checksum.S mk_defs.c
Signature · 1 line
1.7.3.4
PATCH RESEND 11/27 xtensa: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- arch/xtensa/boot/Makefile | 2 +- arch/xtensa/boot/lib/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/xtensa/boot/Makefile +1 -1
@@ -14,7 +14,7 @@ HOSTFLAGS += -Iarch/$(ARCH)/boot/include BIG_ENDIAN := $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#") -export EXTRA_CFLAGS +export ccflags-y export BIG_ENDIAN subdir-y := lib
arch/xtensa/boot/lib/Makefile +1 -1
@@ -6,7 +6,7 @@ zlib := inffast.c inflate.c inftrees.c lib-y += $(zlib:.c=.o) zmem.o -EXTRA_CFLAGS += -Ilib/zlib_inflate +ccflags-y := -Ilib/zlib_inflate quiet_cmd_copy_zlib = COPY $@ cmd_copy_zlib = cat $< > $@
Signature · 1 line
1.7.3.4
PATCH RESEND 12/27 fs: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y for cleaner conditional inclusion.
--- fs/affs/Makefile | 2 +- fs/coda/Makefile | 2 +- fs/gfs2/Makefile | 2 +- fs/jfs/Makefile | 2 +- fs/ncpfs/Makefile | 2 +- fs/ntfs/Makefile | 19 +++++++------------ fs/ocfs2/Makefile | 4 ++-- fs/ocfs2/dlm/Makefile | 2 +- fs/ocfs2/dlmfs/Makefile | 2 +- fs/reiserfs/Makefile | 4 +--- fs/xfs/Makefile | 7 ++----- 11 files changed, 19 insertions(+), 29 deletions(-)
fs/affs/Makefile +1 -1
@@ -2,7 +2,7 @@ # Makefile for the Linux affs filesystem routines. # -#EXTRA_CFLAGS=-DDEBUG=1 +#ccflags-y := -DDEBUG=1 obj-$(CONFIG_AFFS_FS) += affs.o
fs/coda/Makefile +1 -1
@@ -9,4 +9,4 @@ coda-objs := psdev.o cache.o cnode.o inode.o dir.o file.o upcall.o \ # If you want debugging output, please uncomment the following line. -# EXTRA_CFLAGS += -DDEBUG -DDEBUG_SMB_MALLOC=1 +# ccflags-y := -DDEBUG -DDEBUG_SMB_MALLOC=1
fs/gfs2/Makefile +1 -1
@@ -1,4 +1,4 @@ -EXTRA_CFLAGS := -I$(src) +ccflags-y := -I$(src) obj-$(CONFIG_GFS2_FS) += gfs2.o gfs2-y := acl.o bmap.o dir.o xattr.o glock.o \ glops.o inode.o log.o lops.o main.o meta_io.o \
fs/jfs/Makefile +1 -1
@@ -13,4 +13,4 @@ jfs-y := super.o file.o inode.o namei.o jfs_mount.o jfs_umount.o \ jfs-$(CONFIG_JFS_POSIX_ACL) += acl.o -EXTRA_CFLAGS += -D_JFS_4K +ccflags-y := -D_JFS_4K
fs/ncpfs/Makefile +1 -1
@@ -11,6 +11,6 @@ ncpfs-$(CONFIG_NCPFS_EXTRAS) += symlink.o ncpfs-$(CONFIG_NCPFS_NFS_NS) += symlink.o # If you want debugging output, please uncomment the following line -# EXTRA_CFLAGS += -DDEBUG_NCP=1 +# ccflags-y := -DDEBUG_NCP=1 CFLAGS_ncplib_kernel.o := -finline-functions
fs/ntfs/Makefile +7 -12
@@ -2,18 +2,13 @@ obj-$(CONFIG_NTFS_FS) += ntfs.o -ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \ - index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \ - unistr.o upcase.o +ntfs-y := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \ + index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \ + unistr.o upcase.o -EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.30\" +ntfs-$(CONFIG_NTFS_RW) += bitmap.o lcnalloc.o logfile.o quota.o usnjrnl.o -ifeq ($(CONFIG_NTFS_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-y := -DNTFS_VERSION=\"2.1.30\" +ccflags-$(CONFIG_NTFS_DEBUG) += -DDEBUG +ccflags-$(CONFIG_NTFS_RW) += -DNTFS_RW -ifeq ($(CONFIG_NTFS_RW),y) -EXTRA_CFLAGS += -DNTFS_RW - -ntfs-objs += bitmap.o lcnalloc.o logfile.o quota.o usnjrnl.o -endif
fs/ocfs2/Makefile +2 -2
@@ -1,6 +1,6 @@ -EXTRA_CFLAGS += -Ifs/ocfs2 +ccflags-y := -Ifs/ocfs2 -EXTRA_CFLAGS += -DCATCH_BH_JBD_RACES +ccflags-y += -DCATCH_BH_JBD_RACES obj-$(CONFIG_OCFS2_FS) += \ ocfs2.o \
fs/ocfs2/dlm/Makefile +1 -1
@@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -Ifs/ocfs2 +ccflags-y := -Ifs/ocfs2 obj-$(CONFIG_OCFS2_FS_O2CB) += ocfs2_dlm.o
fs/ocfs2/dlmfs/Makefile +1 -1
@@ -1,4 +1,4 @@ -EXTRA_CFLAGS += -Ifs/ocfs2 +ccflags-y := -Ifs/ocfs2 obj-$(CONFIG_OCFS2_FS) += ocfs2_dlmfs.o
fs/reiserfs/Makefile +1 -3
@@ -31,9 +31,7 @@ endif # and causing a panic. Since this behavior only affects ppc32, this ifeq # will work around it. If any other architecture displays this behavior, # add it here. -ifeq ($(CONFIG_PPC32),y) -EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0400, -O1) -endif +ccflags-$(CONFIG_PPC32) := $(call cc-ifversion, -lt, 0400, -O1) TAGS: etags *.c
fs/xfs/Makefile +2 -5
@@ -16,14 +16,11 @@ # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -EXTRA_CFLAGS += -I$(src) -I$(src)/linux-2.6 +ccflags-y := -I$(src) -I$(src)/linux-2.6 +ccflags-$(CONFIG_XFS_DEBUG) += -g XFS_LINUX := linux-2.6 -ifeq ($(CONFIG_XFS_DEBUG),y) - EXTRA_CFLAGS += -g -endif - obj-$(CONFIG_XFS_FS) += xfs.o xfs-y += linux-2.6/xfs_trace.o
Signature · 1 line
1.7.3.4
PATCH RESEND 13/27 char: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/char/mwave/Makefile | 4 ++-- drivers/char/mwave/README | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/char/mwave/Makefile +2 -2
@@ -9,7 +9,7 @@ obj-$(CONFIG_MWAVE) += mwave.o mwave-y := mwavedd.o smapi.o tp3780i.o 3780i.o # To have the mwave driver disable other uarts if necessary -# EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES +# ccflags-y := -DMWAVE_FUTZ_WITH_OTHER_DEVICES # To compile in lots (~20 KiB) of run-time enablable printk()s for debugging: -ccflags-y := -DMW_TRACE +ccflags-y += -DMW_TRACE
drivers/char/mwave/README +1 -1
@@ -11,7 +11,7 @@ are not saved by the BIOS and so do not persist after unload and reload. 0x0008 tp3780i tracing Tracing only occurs if the driver has been compiled with the - MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE + MW_TRACE macro #defined (i.e. let ccflags-y := -DMW_TRACE in the Makefile). mwave_3780i_irq=5/7/10/11/15
Signature · 1 line
1.7.3.4
PATCH RESEND 14/27 dma: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/dma/Makefile | 8 ++------ 1 files changed, 2 insertions(+), 6 deletions(-)
drivers/dma/Makefile +2 -6
@@ -1,9 +1,5 @@ -ifeq ($(CONFIG_DMADEVICES_DEBUG),y) - ccflags-y += -DDEBUG -endif -ifeq ($(CONFIG_DMADEVICES_VDEBUG),y) - ccflags-y += -DVERBOSE_DEBUG -endif +ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG +ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG obj-$(CONFIG_DMA_ENGINE) += dmaengine.o obj-$(CONFIG_NET_DMA) += iovlock.o
Signature · 1 line
1.7.3.4
PATCH RESEND 15/27 hwmon: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/hwmon/Makefile | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/hwmon/Makefile +1 -3
@@ -112,7 +112,5 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o -ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
Signature · 1 line
1.7.3.4
PATCH RESEND 16/27 ide: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/ide/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/ide/Makefile +1 -1
@@ -2,7 +2,7 @@ # link order is important here # -EXTRA_CFLAGS += -Idrivers/ide +ccflags-y := -Idrivers/ide ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \ ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \
Signature · 1 line
1.7.3.4
PATCH RESEND 17/27 ieee802154: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/ieee802154/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/ieee802154/Makefile +1 -1
@@ -1,3 +1,3 @@ obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o -EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD +ccflags-y := -DDEBUG -DCONFIG_FFD
Signature · 1 line
1.7.3.4
PATCH RESEND 18/27 isdn: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/isdn/hisax/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/isdn/hisax/Makefile +1 -1
@@ -4,7 +4,7 @@ # Define maximum number of cards -EXTRA_CFLAGS += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS) +ccflags-y := -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS) obj-$(CONFIG_ISDN_DRV_HISAX) += hisax.o obj-$(CONFIG_HISAX_SEDLBAUER_CS) += sedlbauer_cs.o
Signature · 1 line
1.7.3.4
PATCH RESEND 19/27 memstick: change to new flag variable
In reply to matt mooneyThe EXTRA_CFLAGS assignment in memstick/Makefile was not accomplishing anything because this flag only has effect on sources at the same level as the makefile (i.e., per directory). Since both core/ and host/ rely on MEMSTICK_DEBUG, the subdir-ccflags-y variant seems to be the appropriate choice.
--- drivers/memstick/Makefile | 4 +--- drivers/memstick/core/Makefile | 4 ---- drivers/memstick/host/Makefile | 4 ---- 3 files changed, 1 insertions(+), 11 deletions(-)
drivers/memstick/Makefile +1 -3
@@ -2,9 +2,7 @@ # Makefile for the kernel MemoryStick device drivers. # -ifeq ($(CONFIG_MEMSTICK_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif +subdir-ccflags-$(CONFIG_MEMSTICK_DEBUG) := -DDEBUG obj-$(CONFIG_MEMSTICK) += core/ obj-$(CONFIG_MEMSTICK) += host/
drivers/memstick/core/Makefile +0 -4
@@ -2,10 +2,6 @@ # Makefile for the kernel MemoryStick core. # -ifeq ($(CONFIG_MEMSTICK_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif - obj-$(CONFIG_MEMSTICK) += memstick.o obj-$(CONFIG_MSPRO_BLOCK) += mspro_block.o
drivers/memstick/host/Makefile +0 -4
@@ -2,9 +2,5 @@ # Makefile for MemoryStick host controller drivers # -ifeq ($(CONFIG_MEMSTICK_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif - obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
Signature · 1 line
1.7.3.4
PATCH RESEND 20/27 message: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/message/fusion/Makefile | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/message/fusion/Makefile +1 -1
@@ -2,7 +2,7 @@ # enable verbose logging # CONFIG_FUSION_LOGGING needs to be enabled in Kconfig -#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE +#ccflags-y := -DMPT_DEBUG_VERBOSE #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
Signature · 1 line
1.7.3.4
PATCH RESEND 21/27 misc: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/misc/cb710/Makefile | 4 +--- drivers/misc/sgi-gru/Makefile | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-)
drivers/misc/cb710/Makefile +1 -3
@@ -1,6 +1,4 @@ -ifeq ($(CONFIG_CB710_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_CB710_DEBUG) := -DDEBUG obj-$(CONFIG_CB710_CORE) += cb710.o
drivers/misc/sgi-gru/Makefile +1 -3
@@ -1,6 +1,4 @@ -ifdef CONFIG_SGI_GRU_DEBUG - EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_SGI_GRU_DEBUG) := -DDEBUG obj-$(CONFIG_SGI_GRU) := gru.o gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o
Signature · 1 line
1.7.3.4
PATCH RESEND 22/27 net: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/net/caif/Makefile | 4 +--- drivers/net/skfp/Makefile | 2 +- drivers/net/wan/lmc/Makefile | 2 +- drivers/net/wireless/hostap/hostap_config.h | 4 ++-- drivers/net/wireless/zd1211rw/Makefile | 4 +--- 5 files changed, 6 insertions(+), 10 deletions(-)
drivers/net/caif/Makefile +1 -3
@@ -1,6 +1,4 @@ -ifeq ($(CONFIG_CAIF_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_CAIF_DEBUG) := -DDEBUG # Serial interface obj-$(CONFIG_CAIF_TTY) += caif_serial.o
drivers/net/skfp/Makefile +1 -1
@@ -17,4 +17,4 @@ skfp-objs := skfddi.o hwmtm.o fplustm.o smt.o cfm.o \ # projects. To keep the source common for all those drivers (and # thus simplify fixes to it), please do not clean it up! -EXTRA_CFLAGS += -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes +ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
drivers/net/wan/lmc/Makefile +1 -1
@@ -14,4 +14,4 @@ lmc-objs := lmc_debug.o lmc_media.o lmc_main.o lmc_proto.o # -DDEBUG \ # -DLMC_PACKET_LOG -EXTRA_CFLAGS += -I. $(DBGDEF) +ccflags-y := -I. $(DBGDEF)
drivers/net/wireless/hostap/hostap_config.h +2 -2
@@ -30,9 +30,9 @@/* Following defines can be used to remove unneeded parts of the driver, e.g., * to limit the size of the kernel module. Definitions can be added here in -* hostap_config.h or they can be added to make command with EXTRA_CFLAGS, +* hostap_config.h or they can be added to make command with ccflags-y, * e.g., -* 'make pccard EXTRA_CFLAGS="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' +* 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"' */ /* Do not include debug messages into the driver */
drivers/net/wireless/zd1211rw/Makefile +1 -3
@@ -5,7 +5,5 @@ zd1211rw-objs := zd_chip.o zd_mac.o \ zd_rf_al7230b.o zd_rf_uw2453.o \ zd_rf.o zd_usb.o -ifeq ($(CONFIG_ZD1211RW_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_ZD1211RW_DEBUG) := -DDEBUG
Signature · 1 line
1.7.3.4
PATCH RESEND 23/27 pps: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/pps/clients/Makefile | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/pps/clients/Makefile +1 -3
@@ -6,6 +6,4 @@ obj-$(CONFIG_PPS_CLIENT_KTIMER) += pps-ktimer.o obj-$(CONFIG_PPS_CLIENT_LDISC) += pps-ldisc.o obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o -ifeq ($(CONFIG_PPS_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
Signature · 1 line
1.7.3.4
PATCH RESEND 24/27 rapidio: change to new flag variable
In reply to matt mooneyswitches/ depends on RAPIDIO_DEBUG so the subdir-ccflags-y variant seems to be appropriate here.
--- drivers/rapidio/Makefile | 4 +--- drivers/rapidio/switches/Makefile | 4 ----- 2 files changed, 1 insertions(+), 7 deletions(-)
drivers/rapidio/Makefile +1 -3
@@ -5,6 +5,4 @@ obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o obj-$(CONFIG_RAPIDIO) += switches/ -ifeq ($(CONFIG_RAPIDIO_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
drivers/rapidio/switches/Makefile +0 -4
@@ -7,7 +7,3 @@ obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o - -ifeq ($(CONFIG_RAPIDIO_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif
Signature · 1 line
1.7.3.4
PATCH RESEND 25/27 rtc: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/rtc/Makefile | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/rtc/Makefile +1 -3
@@ -2,9 +2,7 @@ # Makefile for RTC class/drivers. # -ifeq ($(CONFIG_RTC_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_RTC_DEBUG) := -DDEBUG obj-$(CONFIG_RTC_LIB) += rtc-lib.o obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
Signature · 1 line
1.7.3.4
PATCH RESEND 26/27 scsi: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/scsi/aacraid/Makefile | 2 +- drivers/scsi/aic94xx/Makefile | 4 +--- drivers/scsi/libsas/Makefile | 6 ++---- drivers/scsi/lpfc/Makefile | 6 ++---- drivers/scsi/mvsas/Makefile | 4 +--- drivers/scsi/pcmcia/Makefile | 2 +- 6 files changed, 8 insertions(+), 16 deletions(-)
drivers/scsi/aacraid/Makefile +1 -1
@@ -5,4 +5,4 @@ obj-$(CONFIG_SCSI_AACRAID) := aacraid.o aacraid-objs := linit.o aachba.o commctrl.o comminit.o commsup.o \ dpcsup.o rx.o sa.o rkt.o nark.o -EXTRA_CFLAGS := -Idrivers/scsi +ccflags-y := -Idrivers/scsi
drivers/scsi/aic94xx/Makefile +1 -3
@@ -22,9 +22,7 @@ # along with the aic94xx driver; if not, write to the Free Software # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -ifeq ($(CONFIG_AIC94XX_DEBUG),y) - EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT -endif +ccflags-$(CONFIG_AIC94XX_DEBUG) := -DASD_DEBUG -DASD_ENTER_EXIT obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o aic94xx-y += aic94xx_init.o \
drivers/scsi/libsas/Makefile +2 -4
@@ -21,9 +21,7 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA -ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y) - EXTRA_CFLAGS += -DSAS_DEBUG -endif +ccflags-$(CONFIG_SCSI_SAS_LIBSAS_DEBUG) := -DSAS_DEBUG obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o libsas-y += sas_init.o \
@@ -36,4 +34,4 @@ libsas-y += sas_init.o \ sas_scsi_host.o \ sas_task.o libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o -libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o +libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
drivers/scsi/lpfc/Makefile +2 -4
@@ -19,10 +19,8 @@ # *******************************************************************/ ###################################################################### -ifneq ($(GCOV),) - EXTRA_CFLAGS += -fprofile-arcs -ftest-coverage - EXTRA_CFLAGS += -O0 -endif +ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage +ccflags-$(GCOV) += -O0 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
drivers/scsi/mvsas/Makefile +1 -3
@@ -21,9 +21,7 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA -ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y) - EXTRA_CFLAGS += -DMV_DEBUG -endif +ccflags-$(CONFIG_SCSI_MVSAS_DEBUG) := -DMV_DEBUG obj-$(CONFIG_SCSI_MVSAS) += mvsas.o mvsas-y += mv_init.o \
drivers/scsi/pcmcia/Makefile +1 -1
@@ -1,5 +1,5 @@ -EXTRA_CFLAGS += -Idrivers/scsi +ccflags-y := -Idrivers/scsi # 16-bit client drivers obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o
Signature · 1 line
1.7.3.4
PATCH RESEND 27/27 video: change to new flag variable
In reply to matt mooneyReplace EXTRA_CFLAGS with ccflags-y.
--- drivers/video/intelfb/Makefile | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)
drivers/video/intelfb/Makefile +1 -4
@@ -4,7 +4,4 @@ intelfb-y := intelfbdrv.o intelfbhw.o intelfb-$(CONFIG_FB_INTEL_I2C) += intelfb_i2c.o intelfb-objs := $(intelfb-y) -ifdef CONFIG_FB_INTEL_DEBUG -#EXTRA_CFLAGS += -DDEBUG -DVERBOSE -DREGDUMP -EXTRA_CFLAGS += -DDEBUG -DREGDUMP -endif +ccflags-$(CONFIG_FB_INTEL_DEBUG) := -DDEBUG -DREGDUMP
Signature · 1 line
1.7.3.4
Quoted 29 lines · matt mooney
Hi Michal,
These are the patches that never made their way into the linux-next tree. I have added all of the acks that came through.
Thanks,
mattmatt mooney (27):
kernel: change to new flag variable
alpha: change to new flag variables
arm: change to new flag variables
h8300: change to new flag variable
ia64: change to new flag variables
m68k: change to new flag variables
microblaze: change to new flag variable
mips: change to new flag variable
s390: change to new flag variable
um: change to new flag variables
xtensa: change to new flag variable
fs: change to new flag variable
char: change to new flag variable
dma: change to new flag variable
hwmon: change to new flag variable
ide: change to new flag variable
ieee802154: change to new flag variable
isdn: change to new flag variable
memstick: change to new flag variable
Quoted 8 lines
message: change to new flag variable
misc: change to new flag variable
net: change to new flag variable
pps: change to new flag variable
rapidio: change to new flag variable
rtc: change to new flag variable
scsi: change to new flag variable
video: change to new flag variable
I committed these to kbuild.2.6.git#trivial and will send a pull request to Linus.
Thanks,
Michal
Geert Uytterhoeven
maintainerQuoted 8 lines · Michal Marek
Quoted 4 lines · matt mooney
These are the patches that never made their way into the linux-next tree. I have added all of the acks that came through.
m68k: change to new flag variables
I committed these to kbuild.2.6.git#trivial and will send a pull request to Linus.
JFYI, the m68k one went in last night through the m68k tree.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Quoted 11 lines · Geert Uytterhoeven
Quoted 8 lines · Michal Marek
Quoted 4 lines · matt mooney
These are the patches that never made their way into the linux-next tree. I have added all of the acks that came through.
m68k: change to new flag variables
I committed these to kbuild.2.6.git#trivial and will send a pull request to Linus.
JFYI, the m68k one went in last night through the m68k tree.
I did a rebase onto linux-next and back, so that I don't duplicate patches that have been picked up by subsystem maintainers already. This is the resulting shortlog, m68k is not there:
matt mooney (25):
kernel: change to new flag variable
arm: change to new flag variables
h8300: change to new flag variable
ia64: change to new flag variables
microblaze: change to new flag variable
mips: change to new flag variable
s390: change to new flag variable
um: change to new flag variables
xtensa: change to new flag variable
fs: change to new flag variable
char: change to new flag variable
dma: change to new flag variable
hwmon: change to new flag variable
ide: change to new flag variable
ieee802154: change to new flag variable
isdn: change to new flag variable
memstick: change to new flag variable
message: change to new flag variable
misc: change to new flag variable
net: change to new flag variable
pps: change to new flag variable
rapidio: change to new flag variable
rtc: change to new flag variable
scsi: change to new flag variable
video: change to new flag variable
I guess I should be more verbose than "thanks, applied" next time :).
Michal