ARM: tegra: Add Toshiba AC100 support
Subsystems (3)
v2 cover ARM: tegra: Add Toshiba AC100 support
These patches add initial support for the Toshiba AC100 / Dynabook AZ netbook. The code will not be able to boot the machine as the proprietary bootloader uses a different machine type (V1 bl: tegra_generic, V2 bl: harmony). Support for u-boot is being worked on.
The patches are intended for 2.6.40. Depending on the review (and community progress), I hope to be able to submit more hardware support patches.
Marc Dietrich (2):
Add initial support for the Toshiba AC100/Dynabook AZ netbook Add PAZ00 to tegra_defconfig
arch/arm/configs/tegra_defconfig | 1 + arch/arm/mach-tegra/Kconfig | 5 + arch/arm/mach-tegra/Makefile | 3 + arch/arm/mach-tegra/board-paz00-pinmux.c | 157 ++++++++++++++++++++++++++++++ arch/arm/mach-tegra/board-paz00.c | 128 ++++++++++++++++++++++++ arch/arm/mach-tegra/board-paz00.h | 29 ++++++ 6 files changed, 323 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-tegra/board-paz00-pinmux.c create mode 100644 arch/arm/mach-tegra/board-paz00.c create mode 100644 arch/arm/mach-tegra/board-paz00.h
PATCH v2 1/2 Add initial support for the Toshiba AC100/Dynabook AZ netbook
This patch adds the config infrastructure, the pinmux and basic board setup code for PAZ00 (name of board inside the AC100/AZ).
--- arch/arm/mach-tegra/Kconfig | 5 + arch/arm/mach-tegra/Makefile | 3 + arch/arm/mach-tegra/board-paz00-pinmux.c | 157 ++++++++++++++++++++++++++++++ arch/arm/mach-tegra/board-paz00.c | 128 ++++++++++++++++++++++++ arch/arm/mach-tegra/board-paz00.h | 29 ++++++ 5 files changed, 322 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-tegra/board-paz00-pinmux.c create mode 100644 arch/arm/mach-tegra/board-paz00.c create mode 100644 arch/arm/mach-tegra/board-paz00.h
arch/arm/mach-tegra/Kconfig +5 -0
@@ -33,6 +33,11 @@ config MACH_KAEN help Support for the Kaen version of Seaboard +config MACH_PAZ00 + bool "Paz00 board" + help + Support for the Toshiba AC100/Dynabook AZ netbook + config MACH_SEABOARD bool "Seaboard board" help
arch/arm/mach-tegra/Makefile +3 -0
@@ -22,6 +22,9 @@ obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o +obj-${CONFIG_MACH_PAZ00} += board-paz00.o +obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o + obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
arch/arm/mach-tegra/board-paz00-pinmux.c new file +157 -0
157 lines not on this page · raw message
arch/arm/mach-tegra/board-paz00.c new file +128 -0
128 lines not on this page · raw message
arch/arm/mach-tegra/board-paz00.h new file +29 -0
@@ -0,0 +1,29 @@ +/* +* arch/arm/mach-tegra/board-paz00.h +* +* Copyright (C) 2010 Marc Dietrich <[email protected]> +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#ifndef _MACH_TEGRA_BOARD_PAZ00_H +#define _MACH_TEGRA_BOARD_PAZ00_H + +#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 +#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 +#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 +#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 + +void paz00_pinmux_init (void ); + +#endif
Signature · 1 line
1.7.1
PATCH v2 1/2 Add initial support for the Toshiba AC100/Dynabook AZ netbook
Quoted 4 lines · Marc Dietrich
This patch adds the config infrastructure, the pinmux and basic board setup code for PAZ00 (name of board inside the AC100/AZ).
Signed-off-by Marc Dietrich <[email protected]>
Thanks, looks good. Picked up in boards-for-next for .39, I don't see a reason to not merge it earlier than .40.
I sqashed the config change in with my defconfig update.
-Olof
PATCH v2 2/2 Add PAZ00 to tegra_defconfig
In reply to Marc DietrichSubject says it all, this one adds PAZ00 to tegra_defconfig.
--- arch/arm/configs/tegra_defconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/configs/tegra_defconfig +1 -0
@@ -21,6 +21,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y CONFIG_MACH_HARMONY=y +CONFIG_MACH_PAZ00=y CONFIG_TEGRA_DEBUG_UARTD=y CONFIG_ARM_ERRATA_742230=y CONFIG_NO_HZ=y
Signature · 1 line
1.7.1