Skip to contentSkip to conversation

- [DOCS] Removed Fedora 14 bitbake native note

PATCH Applied [email protected] 3 participants 6 messages Mar 25, 2011

lore
Share & tools
lore
#0 lore raw

cover - [DOCS] Removed Fedora 14 bitbake native note

From: Scott Rifenbark <[email protected]>

[BUGID# 931] - I have removed the Note indicating that the user must run 'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0

The Colin Walters patch can be ignored.

Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: srifenbark/qs-work
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=srifenbark/qs-work

Thanks,
<[email protected]>
---

Scott Rifenbark (2):
documentation/yocto-project-qs/yocto-project-qs.xml: Bug reference
added courtesy Colin Walters
documentation/yocto-project-qs/yocto-project-qs.xml: [BUGID# 931] -
Removed Fedora 14 bitbake native note

 .../yocto-project-qs/yocto-project-qs.xml          |    9 ---------
 1 files changed, 0 insertions(+), 9 deletions(-)
#1 lore raw

PATCH 1/2 documentation/yocto-project-qs/yocto-project-qs.xml: Bug reference added courtesy Colin Walters

From: Scott Rifenbark <[email protected]>

In the Quick Start there is a note indicating that you should run 'bitbake make-native' followed by 'bitbake poky-image-sato' if you are running Fedora 14 or another distribution that ships with GNU. Colin Walters submitted a patch that offerred an URL for further explanation on a Make Bug. The URL is
http://www.mail-archive.com/[email protected]/msg06220.html. Rather than submit Colin's patch verbatim I updated the note to include the reference with a little different wording.

This extra information submitted by Colin will be very helpful.

---
 .../yocto-project-qs/yocto-project-qs.xml          |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)
documentation/yocto-project-qs/yocto-project-qs.xml +4 -2
index 4cb50a5..e6a1da9 100644
@@ -289,8 +289,10 @@
              </literallayout>
              <note><para>
                  If you are running Fedora 14 or another distribution 
-                 that ships with GNU make v3.82 you need to run the following two 
-                 <command>bitbake</command> commands instead:
+                 that ships with GNU, run the following two <filename>BitBake</filename>
+                 commands.  
+                 For more information, see
+                 <ulink url='http://www.mail-archive.com/[email protected]/msg06220.html'></ulink>.
                  <literallayout class='monospaced'>
      $ bitbake make-native
      $ bitbake poky-image-sato
Signature · 1 line
1.7.1
#3 lore raw

PATCH 2/2 documentation/yocto-project-qs/yocto-project-qs.xml: [BUGID# 931] - Removed Fedora 14 bitbake native note

In reply to [email protected]

From: Scott Rifenbark <[email protected]>

[BUGID# 931] - I have removed the Note indicating that the user must run 'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0

---
 .../yocto-project-qs/yocto-project-qs.xml          |   11 -----------
 1 files changed, 0 insertions(+), 11 deletions(-)
documentation/yocto-project-qs/yocto-project-qs.xml +0 -11
index e6a1da9..b1040a2 100644
@@ -288,17 +288,6 @@
      $ bitbake poky-image-sato
              </literallayout>
              <note><para>
-                 If you are running Fedora 14 or another distribution 
-                 that ships with GNU, run the following two <filename>BitBake</filename>
-                 commands.  
-                 For more information, see
-                 <ulink url='http://www.mail-archive.com/[email protected]/msg06220.html'></ulink>.
-                 <literallayout class='monospaced'>
-     $ bitbake make-native
-     $ bitbake poky-image-sato
-                 </literallayout>
-             </para></note>
-             <note><para>
                  BitBake requires Python 2.6.  For more information on this requirement, 
                  see the FAQ appendix in the 
                  <ulink url='http://www.yoctoproject.org/docs/poky-ref-manual/poky-ref-manual.html'>
Signature · 1 line
1.7.1
#5 lore raw
In reply to [email protected]
Quoted 17 lines · On Fri, 2011-03-25 at 10:40 -0600, [email protected] wrote:

From: Scott Rifenbark <[email protected]>

[BUGID# 931] - I have removed the Note indicating that the user must run 'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0

The Colin Walters patch can be ignored.

Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: srifenbark/qs-work
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=srifenbark/qs-work

Thanks,
<[email protected]>
---

Quoted 5 lines

Scott Rifenbark (2):
documentation/yocto-project-qs/yocto-project-qs.xml: Bug reference
added courtesy Colin Walters
documentation/yocto-project-qs/yocto-project-qs.xml: [BUGID# 931] -
Removed Fedora 14 bitbake native note

Merged to master, thanks.

Richard

#2 lore raw

Re: [PATCH 1/2] documentation/yocto-project-qs/yocto-project-qs.xml: Bug reference added courtesy Colin Walters

In reply to [email protected]

Are you sure that you even need to use make-native? I am building fine on Fedora 14 without running it.

Quoted 54 lines

-----Original Message-----
From: [email protected] [mailto:poky- [email protected]] On Behalf Of [email protected]
Sent: Friday, March 25, 2011 9:41 AM
To: [email protected]
Subject: [poky] [PATCH 1/2] documentation/yocto-project-qs/yocto- project-qs.xml: Bug reference added courtesy Colin Walters

From: Scott Rifenbark <[email protected]>

In the Quick Start there is a note indicating that you should run 'bitbake make-native' followed by 'bitbake poky-image-sato' if you are running Fedora 14 or another distribution that ships with GNU. Colin Walters submitted a patch that offerred an URL for further explanation on a Make Bug. The URL is
http://www.mail-archive.com/[email protected]/msg06220.html. Rather than submit Colin's patch verbatim I updated the note to include the reference with a little different wording.

This extra information submitted by Colin will be very helpful.

---
.../yocto-project-qs/yocto-project-qs.xml | 6 ++++--

1 files changed, 4 insertions(+), 2 deletions(-)
documentation/yocto-project-qs/yocto-project-qs.xml +0 -1
index 4cb50a5..e6a1da9 100644
@@ -289,8 +289,10 @@
             </literallayout>
             <note><para>
                 If you are running Fedora 14 or another distribution
-                 that ships with GNU make v3.82 you need to run the

following two

documentation/yocto-project-qs/yocto-project-qs.xml +1 -1
-                 <command>bitbake</command> commands instead:
+                 that ships with GNU, run the following two

<filename>BitBake</filename>

documentation/yocto-project-qs/yocto-project-qs.xml +3 -0
+                 commands.
+                 For more information, see
+                 <ulink url='http://www.mail-archive.com/bug-

[email protected]/msg06220.html'></ulink>.
<literallayout class='monospaced'>
$ bitbake make-native
$ bitbake poky-image-sato
--
1.7.1

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

#4 lore raw

Re: [PATCH 2/2] documentation/yocto-project-qs/yocto-project-qs.xml: [BUGID# 931] - Removed Fedora 14 bitbake native note

In reply to [email protected]

Ooops - ignore my last email - sorry.

Quoted 53 lines

-----Original Message-----
From: [email protected] [mailto:poky- [email protected]] On Behalf Of [email protected]
Sent: Friday, March 25, 2011 9:41 AM
To: [email protected]
Subject: [poky] [PATCH 2/2] documentation/yocto-project-qs/yocto- project-qs.xml: [BUGID# 931] - Removed Fedora 14 bitbake native note

From: Scott Rifenbark <[email protected]>

[BUGID# 931] - I have removed the Note indicating that the user must run 'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0

---
.../yocto-project-qs/yocto-project-qs.xml | 11 -----------

1 files changed, 0 insertions(+), 11 deletions(-)
documentation/yocto-project-qs/yocto-project-qs.xml +0 -2
index e6a1da9..b1040a2 100644
@@ -288,17 +288,6 @@
     $ bitbake poky-image-sato
             </literallayout>
             <note><para>
-                 If you are running Fedora 14 or another distribution
-                 that ships with GNU, run the following two

<filename>BitBake</filename>

documentation/yocto-project-qs/yocto-project-qs.xml +0 -3
-                 commands.
-                 For more information, see
-                 <ulink url='http://www.mail-archive.com/bug-

[email protected]/msg06220.html'></ulink>.

documentation/yocto-project-qs/yocto-project-qs.xml +0 -6
-                 <literallayout class='monospaced'>
-     $ bitbake make-native
-     $ bitbake poky-image-sato
-                 </literallayout>
-             </para></note>
-             <note><para>
                 BitBake requires Python 2.6.  For more information on

this requirement,
see the FAQ appendix in the
<ulink url='http://www.yoctoproject.org/docs/poky-ref-
manual/poky-ref-manual.html'>
--
1.7.1

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky