virtio and vhost-net performance enhancements
Subsystems (7)
Michael S. Tsirkin
maintainercover virtio and vhost-net performance enhancements
OK, here's a large patchset that implements the virtio spec update that I sent earlier. It supercedes the PUBLISH_USED_IDX patches
I sent out earlier.
I know it's a lot to ask but please test, and please consider for 2.6.40 :)
I see nice performance improvements: one run showed going from 12 to 18 Gbit/s host to guest with netperf, but I did not spend a lot of time testing performance, so no guarantees it's not a fluke, I hope others will try this out and report.
Pls note I will be away from keyboard for the next week.
Essentially we change virtio ring notification hand-off to work like the one in Xen -
each side publishes an event index, the other one notifies when it reaches that value -
With the one difference that event index starts at 0, same as request index (in xen event index starts at 1).
Each side of the handoff has a feature bit independent of the other one, so we can have e.g. interrupts handled in the new way and exits in the old one.
This is actually what made the patchset larger:
we run out of feature bits so I had to add some more. I tested various combinations of hosts and guests and this code seems to be solid.
With the indexes in place it becomes possbile to request an event after many requests (and not just on the next one as done now). This shall fix the TX queue overrun which currently triggers a storm of interrupts.
The patches are mostly independent and can also be cherry-picked, hopefully there won't be much need of that.
One dependency I'd like to note is on two cleanup patches:
the patch removing batching of available index updates and the patch fixing ring capability checks in virtio-net. This simplified code a bit and made the following patch simpler.
I could unwrap the dependency but prefer as is.
The patchset is on top of net-next which at the time I last rebased was 15ecd03 - so roughly 2.6.39-rc2.
qemu patch will follow shortly.
Rusty, I think (in the hope it will come to that) it will be easier to merge vhost and virtio bits in one go. Can all go in through your tree (Dave in the past acked a very similar patch so should not be a problem) or from me to Dave Miller.
I see nice performance improvements: e.g. from 12 to 18 Gbit/s host to guest with netperf, but did not spend a lot of time testing performance, and I will be away from keyboard for the next week. I hope others will try this out and report.
Michael S. Tsirkin (17):
virtio: 64 bit features
virtio_test: update for 64 bit features
vhost: fix 64 bit features
virtio: don't delay avail index update
virtio: used event index interface
virtio_ring: avail event index interface virtio ring: inline function to check for events
virtio_ring: support for used_event idx feature
virtio: use avail_event index
vhost: utilize used_event index
vhost: support avail_event idx
virtio_test: support used_event index
virtio_test: avail_event index support
virtio: add api for delayed callbacks
virtio_net: delay TX callbacks
virtio_net: fix TX capacity checks using new API
virtio_net: limit xmit polling
Shirley Ma (1):
virtio_ring: Add capacity check API
drivers/lguest/lguest_device.c | 8 +- drivers/net/virtio_net.c | 25 ++++--- drivers/s390/kvm/kvm_virtio.c | 8 +- drivers/vhost/net.c | 12 ++-- drivers/vhost/test.c | 6 +- drivers/vhost/vhost.c | 139 ++++++++++++++++++++++++++++++---------- drivers/vhost/vhost.h | 30 ++++++--- drivers/virtio/virtio.c | 8 +- drivers/virtio/virtio_pci.c | 34 ++++++++-- drivers/virtio/virtio_ring.c | 105 +++++++++++++++++++++++++++--- include/linux/virtio.h | 16 ++++- include/linux/virtio_config.h | 15 +++-- include/linux/virtio_pci.h | 9 ++- include/linux/virtio_ring.h | 30 ++++++++- tools/virtio/virtio_test.c | 39 ++++++++++- 15 files changed, 377 insertions(+), 107 deletions(-)
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 1/18 virtio: 64 bit features
Extend features to 64 bit so we can use more
transport bits.
--- drivers/lguest/lguest_device.c | 8 ++++---- drivers/s390/kvm/kvm_virtio.c | 8 ++++---- drivers/virtio/virtio.c | 8 ++++---- drivers/virtio/virtio_pci.c | 34 ++++++++++++++++++++++++++++------ drivers/virtio/virtio_ring.c | 2 ++ include/linux/virtio.h | 2 +- include/linux/virtio_config.h | 15 +++++++++------ include/linux/virtio_pci.h | 9 ++++++++- 8 files changed, 60 insertions(+), 26 deletions(-)
drivers/lguest/lguest_device.c +4 -4
@@ -93,17 +93,17 @@ static unsigned desc_size(const struct lguest_device_desc *desc) }/* This gets the device's feature bits. */ -static u32 lg_get_features (struct virtio_device *vdev) +static u64 lg_get_features (struct virtio_device *vdev) {unsigned int i; -u32 features =0 ; +u64 features =0 ;struct lguest_device_desc *desc =to_lgdev (vdev)->desc;u8 *in_features =lg_features (desc);/* We do this the slow but generic way. */ -for (i =0 ; i <min (desc->feature_len *8 ,32 ); i++) +for (i =0 ; i <min (desc->feature_len *8 ,64 ); i++)if (in_features[i /8 ] & (1 << (i %8 ))) - features |= (1 << i); + features |= (1ull << i);return features; }
drivers/s390/kvm/kvm_virtio.c +4 -4
@@ -79,16 +79,16 @@ static unsigned desc_size(const struct kvm_device_desc *desc) }/* This gets the device's feature bits. */ -static u32 kvm_get_features (struct virtio_device *vdev) +static u64 kvm_get_features (struct virtio_device *vdev) {unsigned int i; -u32 features =0 ; +u64 features =0 ;struct kvm_device_desc *desc =to_kvmdev (vdev)->desc;u8 *in_features =kvm_vq_features (desc); -for (i =0 ; i <min (desc->feature_len *8 ,32 ); i++) +for (i =0 ; i <min (desc->feature_len *8 ,64 ); i++)if (in_features[i /8 ] & (1 << (i %8 ))) - features |= (1 << i); + features |= (1ull << i);return features; }
drivers/virtio/virtio.c +4 -4
@@ -112,7 +112,7 @@ static int virtio_dev_probe(struct device *_d) struct virtio_device *dev = container_of(_d,struct virtio_device,dev);struct virtio_driver *drv =container_of (dev->dev.driver, struct virtio_driver, driver); -u32 device_features; +u64 device_features;/* We have a driver! */ add_status (dev,VIRTIO_CONFIG_S_DRIVER );
@@ -124,14 +124,14 @@ static int virtio_dev_probe(struct device *_d)memset (dev->features,0 ,sizeof (dev->features));for (i =0 ; i < drv->feature_table_size; i++) {unsigned int f = drv->feature_table[i]; -BUG_ON (f >=32 ); -if (device_features & (1 << f)) +BUG_ON (f >=64 ); +if (device_features & (1ull << f))set_bit (f, dev->features); }/* Transport features always preserved to pass to finalize_features. */ for (i =VIRTIO_TRANSPORT_F_START ; i <VIRTIO_TRANSPORT_F_END ; i++) -if (device_features & (1 << i)) +if (device_features & (1ull << i))set_bit (i, dev->features); dev->config->finalize_features (dev);
drivers/virtio/virtio_pci.c +28 -6
@@ -44,6 +44,8 @@ struct virtio_pci_devicespinlock_t lock;struct list_head virtqueues; +/* 64 bit features */ +int features_hi;/* MSI-X support */ int msix_enabled;int intx_enabled;
@@ -103,26 +105,46 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) }/* virtio config->get_features() implementation */ -static u32 vp_get_features (struct virtio_device *vdev) +static u64 vp_get_features (struct virtio_device *vdev) {struct virtio_pci_device *vp_dev =to_vp_device (vdev); +u32 flo, fhi; -/* When someone needs more than 32 feature bits, we'll need to +/* When someone needs more than 32 feature bits, we need to * steal a bit to indicate that the rest are somewhere else. */ -return ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES ); + flo =ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES ); +if (flo & (0x1 <<VIRTIO_F_FEATURES_HI )) { + vp_dev->features_hi =1 ; +iowrite32 (0x1 <<VIRTIO_F_FEATURES_HI , + vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES ); + fhi =ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES_HI ); + }else { + vp_dev->features_hi =0 ; + fhi =0 ; + } +return (((u64 )fhi) <<32 ) | flo; }/* virtio config->finalize_features() implementation */ static void vp_finalize_features (struct virtio_device *vdev) {struct virtio_pci_device *vp_dev =to_vp_device (vdev); +u32 flo, fhi;/* Give virtio_ring a chance to accept features. */ vring_transport_features (vdev); -/* We only support 32 feature bits. */ -BUILD_BUG_ON (ARRAY_SIZE (vdev->features) !=1 ); -iowrite32 (vdev->features[0 ], vp_dev->ioaddr+VIRTIO_PCI_GUEST_FEATURES ); +/* We only support 64 feature bits. */ +BUILD_BUG_ON (ARRAY_SIZE (vdev->features) !=64 /BITS_PER_LONG ); + flo = vdev->features[0 ]; + fhi = vdev->features[64 /BITS_PER_LONG -1 ] >> (BITS_PER_LONG -32 ); +iowrite32 (flo, vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES ); +if (flo & (0x1 <<VIRTIO_F_FEATURES_HI )) { + vp_dev->features_hi =1 ; +iowrite32 (fhi, vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES_HI ); + }else { + vp_dev->features_hi =0 ; + } }/* virtio config->get() implementation */
drivers/virtio/virtio_ring.c +2 -0
@@ -469,6 +469,8 @@ void vring_transport_features(struct virtio_device *vdev)for (i =VIRTIO_TRANSPORT_F_START ; i <VIRTIO_TRANSPORT_F_END ; i++) {switch (i) { +case VIRTIO_F_FEATURES_HI : +break ;case VIRTIO_RING_F_INDIRECT_DESC :break ;default :
include/linux/virtio.h +1 -1
@@ -105,7 +105,7 @@ struct virtio_device {struct virtio_config_ops *config;struct list_head vqs;/* Note that this is a Linux set_bit-style bitmap. */ -unsigned long features[1 ]; +unsigned long features[64 /BITS_PER_LONG ];void *priv; };
include/linux/virtio_config.h +9 -6
@@ -18,16 +18,19 @@/* We've given up on this device. */ #define VIRTIO_CONFIG_S_FAILED 0x80 -/* Some virtio feature bits (currently bits 28 through 31) are reserved for the +/* Some virtio feature bits (currently bits 28 through 39) are reserved for the * transport being used (eg. virtio_ring), the rest are per-device feature * bits. */ #define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 32 +#define VIRTIO_TRANSPORT_F_END 40/* Do we get callbacks when the ring is completely used, even if we've * suppressed them? */ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 +/* Enables feature bits 32 to 63 (only really required for virtio_pci). */ +#define VIRTIO_F_FEATURES_HI 31 +#ifdef __KERNEL__#include <linux/err.h> #include <linux/virtio.h>
@@ -72,7 +75,7 @@* @del_vqs: free virtqueues found by find_vqs(). * @get_features: get the array of feature bits for this device. * vdev: the virtio_device -* Returns the first 32 feature bits (all we currently need). +* Returns the first 64 feature bits (all we currently need). * @finalize_features: confirm what device features we'll be using. * vdev: the virtio_device * This gives the final feature bits for the device: it can change
@@ -92,7 +95,7 @@ struct virtio_config_ops {vq_callback_t *callbacks[], const char *names[]);void (*del_vqs)(struct virtio_device *); -u32 (*get_features)(struct virtio_device *vdev); +u64 (*get_features)(struct virtio_device *vdev);void (*finalize_features)(struct virtio_device *vdev); };
@@ -110,9 +113,9 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, {/* Did you forget to fix assumptions on max features? */ if (__builtin_constant_p (fbit)) -BUILD_BUG_ON (fbit >=32 ); +BUILD_BUG_ON (fbit >=64 );else -BUG_ON (fbit >=32 ); +BUG_ON (fbit >=64 );if (fbit <VIRTIO_TRANSPORT_F_START )virtio_check_driver_offered_feature (vdev, fbit);
include/linux/virtio_pci.h +8 -1
@@ -55,9 +55,16 @@/* Vector value used to disable MSI for queue */ #define VIRTIO_MSI_NO_VECTOR 0xffff +/* An extended 32-bit r/o bitmask of the features supported by the host */ +#define VIRTIO_PCI_HOST_FEATURES_HI 24 + +/* An extended 32-bit r/w bitmask of features activated by the guest */ +#define VIRTIO_PCI_GUEST_FEATURES_HI 28 +/* The remaining space is defined by each driver as the per-driver * configuration space */ -#define VIRTIO_PCI_CONFIG (dev) ((dev)->msix_enabled ? 24 : 20) +#define VIRTIO_PCI_CONFIG (dev) ((dev)->features_hi ? 32 : \ + (dev)->msix_enabled ? 24 : 20)/* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 1/18 virtio: 64 bit features
In reply to Michael S. TsirkinExtend features to 64 bit so we can use more
transport bits.
--- drivers/lguest/lguest_device.c | 8 ++++---- drivers/s390/kvm/kvm_virtio.c | 8 ++++---- drivers/virtio/virtio.c | 8 ++++---- drivers/virtio/virtio_pci.c | 34 ++++++++++++++++++++++++++++------ drivers/virtio/virtio_ring.c | 2 ++ include/linux/virtio.h | 2 +- include/linux/virtio_config.h | 15 +++++++++------ include/linux/virtio_pci.h | 9 ++++++++- 8 files changed, 60 insertions(+), 26 deletions(-)
drivers/lguest/lguest_device.c +4 -4
@@ -93,17 +93,17 @@ static unsigned desc_size(const struct lguest_device_desc *desc) }/* This gets the device's feature bits. */ -static u32 lg_get_features (struct virtio_device *vdev) +static u64 lg_get_features (struct virtio_device *vdev) {unsigned int i; -u32 features =0 ; +u64 features =0 ;struct lguest_device_desc *desc =to_lgdev (vdev)->desc;u8 *in_features =lg_features (desc);/* We do this the slow but generic way. */ -for (i =0 ; i <min (desc->feature_len *8 ,32 ); i++) +for (i =0 ; i <min (desc->feature_len *8 ,64 ); i++)if (in_features[i /8 ] & (1 << (i %8 ))) - features |= (1 << i); + features |= (1ull << i);return features; }
drivers/s390/kvm/kvm_virtio.c +4 -4
@@ -79,16 +79,16 @@ static unsigned desc_size(const struct kvm_device_desc *desc) }/* This gets the device's feature bits. */ -static u32 kvm_get_features (struct virtio_device *vdev) +static u64 kvm_get_features (struct virtio_device *vdev) {unsigned int i; -u32 features =0 ; +u64 features =0 ;struct kvm_device_desc *desc =to_kvmdev (vdev)->desc;u8 *in_features =kvm_vq_features (desc); -for (i =0 ; i <min (desc->feature_len *8 ,32 ); i++) +for (i =0 ; i <min (desc->feature_len *8 ,64 ); i++)if (in_features[i /8 ] & (1 << (i %8 ))) - features |= (1 << i); + features |= (1ull << i);return features; }
drivers/virtio/virtio.c +4 -4
@@ -112,7 +112,7 @@ static int virtio_dev_probe(struct device *_d) struct virtio_device *dev = container_of(_d,struct virtio_device,dev);struct virtio_driver *drv =container_of (dev->dev.driver, struct virtio_driver, driver); -u32 device_features; +u64 device_features;/* We have a driver! */ add_status (dev,VIRTIO_CONFIG_S_DRIVER );
@@ -124,14 +124,14 @@ static int virtio_dev_probe(struct device *_d)memset (dev->features,0 ,sizeof (dev->features));for (i =0 ; i < drv->feature_table_size; i++) {unsigned int f = drv->feature_table[i]; -BUG_ON (f >=32 ); -if (device_features & (1 << f)) +BUG_ON (f >=64 ); +if (device_features & (1ull << f))set_bit (f, dev->features); }/* Transport features always preserved to pass to finalize_features. */ for (i =VIRTIO_TRANSPORT_F_START ; i <VIRTIO_TRANSPORT_F_END ; i++) -if (device_features & (1 << i)) +if (device_features & (1ull << i))set_bit (i, dev->features); dev->config->finalize_features (dev);
drivers/virtio/virtio_pci.c +28 -6
@@ -44,6 +44,8 @@ struct virtio_pci_devicespinlock_t lock;struct list_head virtqueues; +/* 64 bit features */ +int features_hi;/* MSI-X support */ int msix_enabled;int intx_enabled;
@@ -103,26 +105,46 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) }/* virtio config->get_features() implementation */ -static u32 vp_get_features (struct virtio_device *vdev) +static u64 vp_get_features (struct virtio_device *vdev) {struct virtio_pci_device *vp_dev =to_vp_device (vdev); +u32 flo, fhi; -/* When someone needs more than 32 feature bits, we'll need to +/* When someone needs more than 32 feature bits, we need to * steal a bit to indicate that the rest are somewhere else. */ -return ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES ); + flo =ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES ); +if (flo & (0x1 <<VIRTIO_F_FEATURES_HI )) { + vp_dev->features_hi =1 ; +iowrite32 (0x1 <<VIRTIO_F_FEATURES_HI , + vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES ); + fhi =ioread32 (vp_dev->ioaddr +VIRTIO_PCI_HOST_FEATURES_HI ); + }else { + vp_dev->features_hi =0 ; + fhi =0 ; + } +return (((u64 )fhi) <<32 ) | flo; }/* virtio config->finalize_features() implementation */ static void vp_finalize_features (struct virtio_device *vdev) {struct virtio_pci_device *vp_dev =to_vp_device (vdev); +u32 flo, fhi;/* Give virtio_ring a chance to accept features. */ vring_transport_features (vdev); -/* We only support 32 feature bits. */ -BUILD_BUG_ON (ARRAY_SIZE (vdev->features) !=1 ); -iowrite32 (vdev->features[0 ], vp_dev->ioaddr+VIRTIO_PCI_GUEST_FEATURES ); +/* We only support 64 feature bits. */ +BUILD_BUG_ON (ARRAY_SIZE (vdev->features) !=64 /BITS_PER_LONG ); + flo = vdev->features[0 ]; + fhi = vdev->features[64 /BITS_PER_LONG -1 ] >> (BITS_PER_LONG -32 ); +iowrite32 (flo, vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES ); +if (flo & (0x1 <<VIRTIO_F_FEATURES_HI )) { + vp_dev->features_hi =1 ; +iowrite32 (fhi, vp_dev->ioaddr +VIRTIO_PCI_GUEST_FEATURES_HI ); + }else { + vp_dev->features_hi =0 ; + } }/* virtio config->get() implementation */
drivers/virtio/virtio_ring.c +2 -0
@@ -469,6 +469,8 @@ void vring_transport_features(struct virtio_device *vdev)for (i =VIRTIO_TRANSPORT_F_START ; i <VIRTIO_TRANSPORT_F_END ; i++) {switch (i) { +case VIRTIO_F_FEATURES_HI : +break ;case VIRTIO_RING_F_INDIRECT_DESC :break ;default :
include/linux/virtio.h +1 -1
@@ -105,7 +105,7 @@ struct virtio_device {struct virtio_config_ops *config;struct list_head vqs;/* Note that this is a Linux set_bit-style bitmap. */ -unsigned long features[1 ]; +unsigned long features[64 /BITS_PER_LONG ];void *priv; };
include/linux/virtio_config.h +9 -6
@@ -18,16 +18,19 @@/* We've given up on this device. */ #define VIRTIO_CONFIG_S_FAILED 0x80 -/* Some virtio feature bits (currently bits 28 through 31) are reserved for the +/* Some virtio feature bits (currently bits 28 through 39) are reserved for the * transport being used (eg. virtio_ring), the rest are per-device feature * bits. */ #define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 32 +#define VIRTIO_TRANSPORT_F_END 40/* Do we get callbacks when the ring is completely used, even if we've * suppressed them? */ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 +/* Enables feature bits 32 to 63 (only really required for virtio_pci). */ +#define VIRTIO_F_FEATURES_HI 31 +#ifdef __KERNEL__#include <linux/err.h> #include <linux/virtio.h>
@@ -72,7 +75,7 @@* @del_vqs: free virtqueues found by find_vqs(). * @get_features: get the array of feature bits for this device. * vdev: the virtio_device -* Returns the first 32 feature bits (all we currently need). +* Returns the first 64 feature bits (all we currently need). * @finalize_features: confirm what device features we'll be using. * vdev: the virtio_device * This gives the final feature bits for the device: it can change
@@ -92,7 +95,7 @@ struct virtio_config_ops {vq_callback_t *callbacks[], const char *names[]);void (*del_vqs)(struct virtio_device *); -u32 (*get_features)(struct virtio_device *vdev); +u64 (*get_features)(struct virtio_device *vdev);void (*finalize_features)(struct virtio_device *vdev); };
@@ -110,9 +113,9 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, {/* Did you forget to fix assumptions on max features? */ if (__builtin_constant_p (fbit)) -BUILD_BUG_ON (fbit >=32 ); +BUILD_BUG_ON (fbit >=64 );else -BUG_ON (fbit >=32 ); +BUG_ON (fbit >=64 );if (fbit <VIRTIO_TRANSPORT_F_START )virtio_check_driver_offered_feature (vdev, fbit);
include/linux/virtio_pci.h +8 -1
@@ -55,9 +55,16 @@/* Vector value used to disable MSI for queue */ #define VIRTIO_MSI_NO_VECTOR 0xffff +/* An extended 32-bit r/o bitmask of the features supported by the host */ +#define VIRTIO_PCI_HOST_FEATURES_HI 24 + +/* An extended 32-bit r/w bitmask of features activated by the guest */ +#define VIRTIO_PCI_GUEST_FEATURES_HI 28 +/* The remaining space is defined by each driver as the per-driver * configuration space */ -#define VIRTIO_PCI_CONFIG (dev) ((dev)->msix_enabled ? 24 : 20) +#define VIRTIO_PCI_CONFIG (dev) ((dev)->features_hi ? 32 : \ + (dev)->msix_enabled ? 24 : 20)/* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 2/18 virtio_test: update for 64 bit features
In reply to Michael S. TsirkinExtend the virtio_test tool so it can work with
64 bit features.
--- tools/virtio/virtio_test.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
tools/virtio/virtio_test.c +6 -2
@@ -55,7 +55,6 @@ void vhost_vq_setup(struct vdev_info *dev, struct vq_info *info) {struct vhost_vring_state state = { .index = info->idx };struct vhost_vring_file file = { .index = info->idx }; -unsigned long long features = dev->vdev.features[0 ];struct vhost_vring_addr addr = { .index = info->idx, .desc_user_addr = (uint64_t )(unsigned long )info->vring.desc,
@@ -63,6 +62,10 @@ void vhost_vq_setup(struct vdev_info *dev, struct vq_info *info) .used_user_addr = (uint64_t)(unsigned long)info->vring.used, };int r; +unsigned long long features = dev->vdev.features[0 ]; +if (sizeof features >sizeof dev->vdev.features[0 ]) + features |= ((unsigned long long )dev->vdev.features[1 ]) <<32 ; + r =ioctl (dev->control,VHOST_SET_FEATURES , &features);assert (r >=0 ); state.num = info->vring.num;
@@ -107,7 +110,8 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features)int r;memset (dev,0 ,sizeof *dev); dev->vdev.features[0 ] = features; - dev->vdev.features[1 ] = features >>32 ; +if (sizeof features >sizeof dev->vdev.features[0 ]) + dev->vdev.features[1 ] = features >>32 ; dev->buf_size =1024 ; dev->buf =malloc (dev->buf_size);assert (dev->buf);
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 3/18 vhost: fix 64 bit features
In reply to Michael S. TsirkinUpdate vhost_has_feature to make it work correctly for bit > 32.
--- drivers/vhost/vhost.h | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/vhost/vhost.h +4 -4
@@ -117,7 +117,7 @@ struct vhost_dev {struct vhost_memory __rcu *memory;struct mm_struct *mm;struct mutex mutex; -unsigned acked_features; +u64 acked_features;struct vhost_virtqueue *vqs;int nvqs;struct file *log_file;
@@ -169,14 +169,14 @@ enum { (1 << VIRTIO_NET_F_MRG_RXBUF), }; -static inline int vhost_has_feature (struct vhost_dev *dev,int bit) +static inline bool vhost_has_feature (struct vhost_dev *dev,int bit) { -unsigned acked_features; +u64 acked_features;/* TODO: check that we are running from vhost_worker or dev mutex is * held? */ acked_features =rcu_dereference_index_check (dev->acked_features,1 ); -return acked_features & (1 << bit); +return acked_features & (1ull << bit); }#endif
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 4/18 virtio: don't delay avail index update
In reply to Michael S. TsirkinUpdate avail index immediately instead of upon kick:
for virtio-net RX this helps parallelism with the host.
--- drivers/virtio/virtio_ring.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)
drivers/virtio/virtio_ring.c +5 -10
@@ -86,8 +86,6 @@ struct vring_virtqueueunsigned int num_free;/* Head of free buffer list. */ unsigned int free_head; -/* Number we've added since last sync. */ -unsigned int num_added;/* Last used index we've seen. */ u16 last_used_idx;
@@ -224,8 +222,12 @@ add_head:/* Put entry in available array (but don't update avail->idx until they * do sync). FIXME: avoid modulus here? */ - avail = (vq->vring.avail->idx + vq->num_added++) % vq->vring.num; + avail = vq->vring.avail->idx % vq->vring.num; vq->vring.avail->ring[avail] = head; +/* Descriptors and available array need to be set before we expose the +* new available array entries. */ +virtio_wmb (); + vq->vring.avail->idx++;pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);
@@ -238,12 +240,6 @@ void virtqueue_kick(struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);START_USE (vq); -/* Descriptors and available array need to be set before we expose the -* new available array entries. */ -virtio_wmb (); - - vq->vring.avail->idx += vq->num_added; - vq->num_added =0 ;/* Need to update avail index before checking if we should notify */ virtio_mb ();
@@ -430,7 +426,6 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->notify = notify; vq->broken = false; vq->last_used_idx =0 ; - vq->num_added =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG vq->in_use = false;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 4/18 virtio: don't delay avail index update
In reply to Michael S. TsirkinUpdate avail index immediately instead of upon kick:
for virtio-net RX this helps parallelism with the host.
--- drivers/virtio/virtio_ring.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-)
drivers/virtio/virtio_ring.c +5 -10
@@ -86,8 +86,6 @@ struct vring_virtqueueunsigned int num_free;/* Head of free buffer list. */ unsigned int free_head; -/* Number we've added since last sync. */ -unsigned int num_added;/* Last used index we've seen. */ u16 last_used_idx;
@@ -224,8 +222,12 @@ add_head:/* Put entry in available array (but don't update avail->idx until they * do sync). FIXME: avoid modulus here? */ - avail = (vq->vring.avail->idx + vq->num_added++) % vq->vring.num; + avail = vq->vring.avail->idx % vq->vring.num; vq->vring.avail->ring[avail] = head; +/* Descriptors and available array need to be set before we expose the +* new available array entries. */ +virtio_wmb (); + vq->vring.avail->idx++;pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);
@@ -238,12 +240,6 @@ void virtqueue_kick(struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);START_USE (vq); -/* Descriptors and available array need to be set before we expose the -* new available array entries. */ -virtio_wmb (); - - vq->vring.avail->idx += vq->num_added; - vq->num_added =0 ;/* Need to update avail index before checking if we should notify */ virtio_mb ();
@@ -430,7 +426,6 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->notify = notify; vq->broken = false; vq->last_used_idx =0 ; - vq->num_added =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG vq->in_use = false;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 5/18 virtio: used event index interface
In reply to Michael S. TsirkinDefine a new feature bit for the guest to utilize a used_event index (like Xen) instead if a flag bit to enable/disable interrupts.
--- include/linux/virtio_ring.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
include/linux/virtio_ring.h +9 -0
@@ -29,6 +29,10 @@/* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt +* at the end of the avail ring. Host should ignore the avail->flags field. */ +#define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ struct vring_desc {/* Address (guest-physical). */
@@ -83,6 +87,7 @@ struct vring {* __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; +* __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[];
@@ -93,6 +98,10 @@ struct vring {* struct vring_used_elem used[num]; * }; */ +/* We publish the used event index at the end of the available ring. +* It is at the end for backwards compatibility. */ +#define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align) {
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 05/18] virtio: used event index interface
Quoted 32 lines · Michael S. Tsirkin
Define a new feature bit for the guest to utilize a
used_eventindex (like Xen) instead if a flag bit to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +2
-0@@ -29,6 +29,10 @@/* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt +* at the end of the avail ring. Host should ignore the avail->flags field. */ +#define
VIRTIO_RING_F_USED_EVENT_IDX29
+
/* Virtio ring descriptors: 16 bytes. These can chain together via
"next". */ structvring_desc{include/linux/virtio_ring.h +1
-0/* Address (guest-physical). */ @@ -83,6 +87,7 @@ struct vring {* __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; +* __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[];
include/linux/virtio_ring.h struct vring { · line 107
Quoted 10 lines
include/linux/virtio_ring.h +4
-0@@ -93,6 +98,10 @@ struct vring {* struct vring_used_elem used[num]; * }; */ +/* We publish the used event index at the end of the available ring. +* It is at the end for backwards compatibility. */ +#define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align) {
You should update the vring_size procedure to account for the extra field at the end of the available ring by change the "(2 + num)" to "(3 + num)":
return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
Tom
Michael S. Tsirkin
maintainerRe: [PATCH 05/18] virtio: used event index interface
Quoted 46 lines · Tom Lendacky
Quoted 32 lines · Michael S. Tsirkin
Define a new feature bit for the guest to utilize a
used_eventindex (like Xen) instead if a flag bit to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +2
-0@@ -29,6 +29,10 @@/* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt +* at the end of the avail ring. Host should ignore the avail->flags field. */ +#define
VIRTIO_RING_F_USED_EVENT_IDX29
+
/* Virtio ring descriptors: 16 bytes. These can chain together via
"next". */ structvring_desc{include/linux/virtio_ring.h +1
-0/* Address (guest-physical). */ @@ -83,6 +87,7 @@ struct vring {* __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; +* __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[]; include/linux/virtio_ring.h struct vring { · line 107
Quoted 10 lines
include/linux/virtio_ring.h +4
-0@@ -93,6 +98,10 @@ struct vring {* struct vring_used_elem used[num]; * }; */ +/* We publish the used event index at the end of the available ring. +* It is at the end for backwards compatibility. */ +#define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align) {You should update the
vring_sizeprocedure to account for the extra field at the end of the available ring by change the "(2 + num)" to "(3 + num)":
Quoted 3 lines
return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)Tom
In practice it gives the same result because of the alignment, but sure. Thanks!
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: [PATCH 05/18] virtio: used event index interface
In reply to Tom LendackyQuoted 46 lines · Tom Lendacky
Quoted 32 lines · Michael S. Tsirkin
Define a new feature bit for the guest to utilize a
used_eventindex (like Xen) instead if a flag bit to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +2
-0@@ -29,6 +29,10 @@/* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt +* at the end of the avail ring. Host should ignore the avail->flags field. */ +#define
VIRTIO_RING_F_USED_EVENT_IDX29
+
/* Virtio ring descriptors: 16 bytes. These can chain together via
"next". */ structvring_desc{include/linux/virtio_ring.h +1
-0/* Address (guest-physical). */ @@ -83,6 +87,7 @@ struct vring {* __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; +* __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[]; include/linux/virtio_ring.h struct vring { · line 107
Quoted 10 lines
include/linux/virtio_ring.h +4
-0@@ -93,6 +98,10 @@ struct vring {* struct vring_used_elem used[num]; * }; */ +/* We publish the used event index at the end of the available ring. +* It is at the end for backwards compatibility. */ +#define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align) {You should update the
vring_sizeprocedure to account for the extra field at the end of the available ring by change the "(2 + num)" to "(3 + num)":
Quoted 3 lines
return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)Tom
In practice it gives the same result because of the alignment, but sure. Thanks!
Signature · 1 line
MST
Re: [PATCH 05/18] virtio: used event index interface
In reply to Michael S. TsirkinQuoted 32 lines · Michael S. Tsirkin
Define a new feature bit for the guest to utilize a
used_eventindex (like Xen) instead if a flag bit to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +2
-0@@ -29,6 +29,10 @@/* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt +* at the end of the avail ring. Host should ignore the avail->flags field. */ +#define
VIRTIO_RING_F_USED_EVENT_IDX29
+
/* Virtio ring descriptors: 16 bytes. These can chain together via
"next". */ structvring_desc{include/linux/virtio_ring.h +1
-0/* Address (guest-physical). */ @@ -83,6 +87,7 @@ struct vring {* __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; +* __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[];
include/linux/virtio_ring.h struct vring { · line 107
Quoted 10 lines
include/linux/virtio_ring.h +4
-0@@ -93,6 +98,10 @@ struct vring {* struct vring_used_elem used[num]; * }; */ +/* We publish the used event index at the end of the available ring. +* It is at the end for backwards compatibility. */ +#define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align) {
You should update the vring_size procedure to account for the extra field at the end of the available ring by change the "(2 + num)" to "(3 + num)":
return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
Tom
Michael S. Tsirkin
maintainerPATCH 6/18 virtio_ring: avail event index interface
In reply to Michael S. TsirkinDefine a new feature bit for the host to
declare that it uses an avail_event index
(like Xen) instead of a feature bit
to enable/disable interrupts.
--- include/linux/virtio_ring.h | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)
include/linux/virtio_ring.h +8 -3
@@ -32,6 +32,9 @@/* The Guest publishes the used index for which it expects an interrupt * at the end of the avail ring. Host should ignore the avail->flags field. */ #define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ struct vring_desc {
@@ -96,11 +99,13 @@ struct vring {* __u16 used_flags; * __u16 used_idx; * struct vring_used_elem used[num]; +* __u16 avail_event_idx; * }; */ -/* We publish the used event index at the end of the available ring. -* It is at the end for backwards compatibility. */ +/* We publish the used event index at the end of the available ring, and vice +* versa. They are at the end for backwards compatibility. */ #define vring_used_event (vr) ((vr)->avail->ring[(vr)->num]) +#define vring_avail_event (vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])static inline void vring_init (struct vring *vr,unsigned int num,void *p,unsigned long align)
@@ -116,7 +121,7 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) {return ((sizeof (struct vring_desc ) * num +sizeof (__u16) * (2 + num) + align -1 ) & ~(align -1 )) - +sizeof (__u16) *2 +sizeof (struct vring_used_elem ) * num; + +sizeof (__u16) *3 +sizeof (struct vring_used_elem ) * num; }#ifdef __KERNEL__
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 06/18] virtio_ring: avail event index interface
Quoted 15 lines · Michael S. Tsirkin
Define a new feature bit for the host to
declare that it uses anavail_eventindex
(like Xen) instead of a feature bit
to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)include/linux/virtio_ring.h +0
-0
include/linux/virtio_ring.h line 37
Quoted 6 lines
include/linux/virtio_ring.h +3
-0@@ -32,6 +32,9 @@/* The Guest publishes the used index for which it expects an interrupt * at the end of the avail ring. Host should ignore the avail->flags field. */ #define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32
Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 06/18] virtio_ring: avail event index interface
Quoted 27 lines · Rusty Russell
Quoted 15 lines · Michael S. Tsirkin
Define a new feature bit for the host to
declare that it uses anavail_eventindex
(like Xen) instead of a feature bit
to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)include/linux/virtio_ring.h +0
-0include/linux/virtio_ring.h line 37
Quoted 6 lines
include/linux/virtio_ring.h +3
-0@@ -32,6 +32,9 @@/* The Guest publishes the used index for which it expects an interrupt * at the end of the avail ring. Host should ignore the avail->flags field. */ #define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
Signature · 1 line
MST
Re: [PATCH 06/18] virtio_ring: avail event index interface
Quoted 16 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Quoted 8 lines
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 06/18] virtio_ring: avail event index interface
Quoted 24 lines · Rusty Russell
Quoted 23 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Quoted 7 lines
Quoted 1 line
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Thanks,
Rusty.
Yes, I know. But if we do expand feature bits anyway, for debugging and profiling if nothing else it's useful to have them separate ... If you take both why does the order matter?
Signature · 1 line
MST
Re: [PATCH 06/18] virtio_ring: avail event index interface
Quoted 30 lines · Michael S. Tsirkin
Quoted 29 lines · Rusty Russell
Quoted 16 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.Quoted 8 lines
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Quoted 6 lines
Quoted 2 lines
Thanks,
Rusty.Yes, I know. But if we do expand feature bits anyway, for debugging and profiling if nothing else it's useful to have them separate ... If you take both why does the order matter?
Damage control. Then if something breaks, it doesn't break everything.
Cheers,
Rusty.
Re: [PATCH 06/18] virtio_ring: avail event index interface
In reply to Michael S. TsirkinQuoted 30 lines · Michael S. Tsirkin
Quoted 29 lines · Rusty Russell
Quoted 16 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.Quoted 8 lines
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Quoted 6 lines
Quoted 2 lines
Thanks,
Rusty.Yes, I know. But if we do expand feature bits anyway, for debugging and profiling if nothing else it's useful to have them separate ... If you take both why does the order matter?
Damage control. Then if something breaks, it doesn't break everything.
Cheers,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 06/18] virtio_ring: avail event index interface
In reply to Rusty RussellQuoted 24 lines · Rusty Russell
Quoted 23 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Quoted 7 lines
Quoted 1 line
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Thanks,
Rusty.
Yes, I know. But if we do expand feature bits anyway, for debugging and profiling if nothing else it's useful to have them separate ... If you take both why does the order matter?
Signature · 1 line
MST
Re: [PATCH 06/18] virtio_ring: avail event index interface
In reply to Michael S. TsirkinQuoted 16 lines · Michael S. Tsirkin
Quoted 10 lines · Rusty Russell
include/linux/virtio_ring.h line 37
Quoted 4 lines · Michael S. Tsirkin
#define
VIRTIO_RING_F_USED_EVENT_IDX29include/linux/virtio_ring.h +3
-0+/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Quoted 8 lines
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
If we combine them into one, then these patches no longer depend on the feature bit expansion, which is worthwhile (though I'll take both).
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 06/18] virtio_ring: avail event index interface
In reply to Rusty RussellQuoted 27 lines · Rusty Russell
Quoted 15 lines · Michael S. Tsirkin
Define a new feature bit for the host to
declare that it uses anavail_eventindex
(like Xen) instead of a feature bit
to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)include/linux/virtio_ring.h +0
-0include/linux/virtio_ring.h line 37
Quoted 6 lines
include/linux/virtio_ring.h +3
-0@@ -32,6 +32,9 @@/* The Guest publishes the used index for which it expects an interrupt * at the end of the avail ring. Host should ignore the avail->flags field. */ #define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Quoted 4 lines
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Hmm, it makes debugging easier as each side can disable publishing separately - I used it all the time when I saw e.g. networking stuck to guess whether I need to investigate the interrupt or the exit handling.
But I'm not hung up on this.
Let me know pls.
Signature · 1 line
MST
Re: [PATCH 06/18] virtio_ring: avail event index interface
In reply to Michael S. TsirkinQuoted 15 lines · Michael S. Tsirkin
Define a new feature bit for the host to
declare that it uses anavail_eventindex
(like Xen) instead of a feature bit
to enable/disable interrupts.Signed-off-by Michael S. Tsirkin <[email protected]>--- include/linux/virtio_ring.h | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-)include/linux/virtio_ring.h +0
-0
include/linux/virtio_ring.h line 37
Quoted 6 lines
include/linux/virtio_ring.h +3
-0@@ -32,6 +32,9 @@/* The Guest publishes the used index for which it expects an interrupt * at the end of the avail ring. Host should ignore the avail->flags field. */ #define VIRTIO_RING_F_USED_EVENT_IDX 29 +/* The Host publishes the avail index for which it expects a kick +* at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_AVAIL_EVENT_IDX 32
Are you really sure we want to separate the two? Seems a little simpler to have one bit to mean "we're publishing our threshold". For someone implementing this from scratch, it's a little simpler.
Or are there cases where the old style makes more sense?
Thanks,
Rusty.
Michael S. Tsirkin
maintainerPATCH 7/18 virtio ring: inline function to check for events
In reply to Michael S. TsirkinWith the new used_event and avail_event and features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.
Note that Xen has similar logic for notification hold-off in include/xen/interface/io/ring.h with req_event and req_prod corresponding to event_idx + 1 and new_idx respectively. +1 comes from the fact that req_event and req_prod in Xen start at 1, while event index in virtio starts at 0.
--- include/linux/virtio_ring.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
include/linux/virtio_ring.h +14 -0
@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) +sizeof (__u16) *3 +sizeof (struct vring_used_elem ) * num; } +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if +* we have just incremented index from old to new_idx, +* should we trigger an event? */ +static inline int vring_need_event (__u16 event_idx,__u16 new_idx,__u16 old) +{ +/* Note: Xen has similar logic for notification hold-off +* in include/xen/interface/io/ring.h with req_event and req_prod +* corresponding to event_idx + 1 and new_idx respectively. +* Note also that req_event and req_prod in Xen start at 1, +* event indexes in virtio start at 0. */ +return (__u16)(new_idx - event_idx -1 ) < (__u16)(new_idx - old); +} +#ifdef __KERNEL__#include <linux/irqreturn.h> struct virtio_device ;
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 07/18] virtio ring: inline function to check for events
Quoted 20 lines · Michael S. Tsirkin
With the new
used_eventandavail_eventand features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.Note that Xen has similar logic for notification hold-off in
include/xen/interface/io/ring.hwithreq_eventandreq_prodcorresponding toevent_idx+ 1 andnew_idxrespectively. +1 comes from the fact thatreq_eventandreq_prodin Xen start at 1, while event index in virtio starts at 0.Signed-off-by Michael S. Tsirkin <[email protected]>---
include/linux/virtio_ring.h | 14 ++++++++++++++1 files changed, 14 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +0
-0
include/linux/virtio_ring.h static inline unsigned vring_size(unsigned int num, unsigned long align) · line 128
Quoted 5 lines
include/linux/virtio_ring.h +2
-0@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; } +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if
s/other size/other side/ ?
Stefan
Michael S. Tsirkin
maintainerRe: [PATCH 07/18] virtio ring: inline function to check for events
Quoted 24 lines · Stefan Hajnoczi
Quoted 23 lines · Michael S. Tsirkin
With the new
used_eventandavail_eventand features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.Note that Xen has similar logic for notification hold-off in
include/xen/interface/io/ring.hwithreq_eventandreq_prodcorresponding toevent_idx+ 1 andnew_idxrespectively. +1 comes from the fact thatreq_eventandreq_prodin Xen start at 1, while event index in virtio starts at 0.Signed-off-by Michael S. Tsirkin <[email protected]>---
include/linux/virtio_ring.h | 14 ++++++++++++++1 files changed, 14 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +0
-0@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; }
Quoted 6 lines
include/linux/virtio_ring.h static inline unsigned vring_size(unsigned int num, unsigned long align) · line 128
Quoted 2 lines
include/linux/virtio_ring.h +2
-0+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if s/other size/other side/ ?
Stefan
Exactly. Good catch, thanks.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: [PATCH 07/18] virtio ring: inline function to check for events
In reply to Stefan HajnocziQuoted 24 lines · Stefan Hajnoczi
Quoted 23 lines · Michael S. Tsirkin
With the new
used_eventandavail_eventand features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.Note that Xen has similar logic for notification hold-off in
include/xen/interface/io/ring.hwithreq_eventandreq_prodcorresponding toevent_idx+ 1 andnew_idxrespectively. +1 comes from the fact thatreq_eventandreq_prodin Xen start at 1, while event index in virtio starts at 0.Signed-off-by Michael S. Tsirkin <[email protected]>---
include/linux/virtio_ring.h | 14 ++++++++++++++1 files changed, 14 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +0
-0@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; }
Quoted 6 lines
include/linux/virtio_ring.h static inline unsigned vring_size(unsigned int num, unsigned long align) · line 128
Quoted 2 lines
include/linux/virtio_ring.h +2
-0+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if s/other size/other side/ ?
Stefan
Exactly. Good catch, thanks.
Signature · 1 line
MST
Re: [PATCH 07/18] virtio ring: inline function to check for events
In reply to Michael S. TsirkinQuoted 20 lines · Michael S. Tsirkin
With the new
used_eventandavail_eventand features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.Note that Xen has similar logic for notification hold-off in
include/xen/interface/io/ring.hwithreq_eventandreq_prodcorresponding toevent_idx+ 1 andnew_idxrespectively. +1 comes from the fact thatreq_eventandreq_prodin Xen start at 1, while event index in virtio starts at 0.Signed-off-by Michael S. Tsirkin <[email protected]>---
include/linux/virtio_ring.h | 14 ++++++++++++++1 files changed, 14 insertions(+), 0 deletions(-)include/linux/virtio_ring.h +0
-0
include/linux/virtio_ring.h static inline unsigned vring_size(unsigned int num, unsigned long align) · line 128
Quoted 5 lines
include/linux/virtio_ring.h +2
-0@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; } +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if
s/other size/other side/ ?
Stefan
Michael S. Tsirkin
maintainerPATCH 7/18 virtio ring: inline function to check for events
In reply to Michael S. TsirkinWith the new used_event and avail_event and features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header.
Note that Xen has similar logic for notification hold-off in include/xen/interface/io/ring.h with req_event and req_prod corresponding to event_idx + 1 and new_idx respectively. +1 comes from the fact that req_event and req_prod in Xen start at 1, while event index in virtio starts at 0.
--- include/linux/virtio_ring.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
include/linux/virtio_ring.h +14 -0
@@ -124,6 +124,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) +sizeof (__u16) *3 +sizeof (struct vring_used_elem ) * num; } +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if +* we have just incremented index from old to new_idx, +* should we trigger an event? */ +static inline int vring_need_event (__u16 event_idx,__u16 new_idx,__u16 old) +{ +/* Note: Xen has similar logic for notification hold-off +* in include/xen/interface/io/ring.h with req_event and req_prod +* corresponding to event_idx + 1 and new_idx respectively. +* Note also that req_event and req_prod in Xen start at 1, +* event indexes in virtio start at 0. */ +return (__u16)(new_idx - event_idx -1 ) < (__u16)(new_idx - old); +} +#ifdef __KERNEL__#include <linux/irqreturn.h> struct virtio_device ;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 8/18 virtio_ring: support for used_event idx feature
In reply to Michael S. TsirkinAdd support for the used_event idx feature: when enabling interrupts, publish the current avail index value to the host so that we get interrupts on the next update.
--- drivers/virtio/virtio_ring.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
drivers/virtio/virtio_ring.c +14 -0
@@ -320,6 +320,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i];detach_buf (vq, i); vq->last_used_idx++; +/* If we expect an interrupt for the next entry, tell host +* by writing event index and flush out the write before +* the read in the next get_buf call. */ +if (!(vq->vring.avail->flags &VRING_AVAIL_F_NO_INTERRUPT )) { +vring_used_event (&vq->vring) = vq->last_used_idx; +virtio_mb (); + } +END_USE (vq);return ret; }
@@ -341,7 +349,11 @@ bool virtqueue_enable_cb(struct virtqueue *_vq)/* We optimistically turn back on interrupts, then check if there was * more to do. */ +/* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to +* either clear the flags bit or point the event index at the next +* entry. Always do both to keep code simple. */ vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT ; +vring_used_event (&vq->vring) = vq->last_used_idx;virtio_mb ();if (unlikely (more_used (vq))) {END_USE (vq);
@@ -468,6 +480,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_INDIRECT_DESC :break ; +case VIRTIO_RING_F_USED_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 08/18] virtio_ring: support for used_event idx feature
Quoted 15 lines · Michael S. Tsirkin
Add support for the
used_eventidx feature: when enabling interrupts, publish the current avail index value to the host so that we get interrupts on the next update.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)drivers/virtio/virtio_ring.c +0
-0@@ -320,6 +320,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i];
drivers/virtio/virtio_ring.c void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) · line 330
Quoted 10 lines
drivers/virtio/virtio_ring.c +8
-0detach_buf (vq, i); vq->last_used_idx++; +/* If we expect an interrupt for the next entry, tell host +* by writing event index and flush out the write before +* the read in the next get_buf call. */ +if (!(vq->vring.avail->flags &VRING_AVAIL_F_NO_INTERRUPT )) { +vring_used_event (&vq->vring) = vq->last_used_idx; +virtio_mb (); + } +
Hmm, so you're still using the avail->flags; it's just if thresholding is enabled the host will ignore it?
It's a little subtle, but it keeps this patch small. Perhaps we'll want to make it more explicit later.
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 08/18] virtio_ring: support for used_event idx feature
Quoted 30 lines · Rusty Russell
Quoted 15 lines · Michael S. Tsirkin
Add support for the
used_eventidx feature: when enabling interrupts, publish the current avail index value to the host so that we get interrupts on the next update.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)drivers/virtio/virtio_ring.c +0
-0@@ -320,6 +320,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i];drivers/virtio/virtio_ring.c void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) · line 330
Quoted 10 lines
drivers/virtio/virtio_ring.c +8
-0detach_buf (vq, i); vq->last_used_idx++; +/* If we expect an interrupt for the next entry, tell host +* by writing event index and flush out the write before +* the read in the next get_buf call. */ +if (!(vq->vring.avail->flags &VRING_AVAIL_F_NO_INTERRUPT )) { +vring_used_event (&vq->vring) = vq->last_used_idx; +virtio_mb (); + } +Hmm, so you're still using the
avail->flags; it's just if thresholding is enabled the host will ignore it?
Quoted 1 line
It's a little subtle, but it keeps this patch small.
Right, that's exactly why I do it this way.
Quoted 4 lines
Perhaps we'll want to make it more explicit later.
Thanks,
Rusty.
Yes, e.g. it might be better to avoid touching that cache line, and track the current status in a private field in the guest. But I was unable to measure any effect from doing it either way.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: [PATCH 08/18] virtio_ring: support for used_event idx feature
In reply to Rusty RussellQuoted 30 lines · Rusty Russell
Quoted 15 lines · Michael S. Tsirkin
Add support for the
used_eventidx feature: when enabling interrupts, publish the current avail index value to the host so that we get interrupts on the next update.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)drivers/virtio/virtio_ring.c +0
-0@@ -320,6 +320,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i];drivers/virtio/virtio_ring.c void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) · line 330
Quoted 10 lines
drivers/virtio/virtio_ring.c +8
-0detach_buf (vq, i); vq->last_used_idx++; +/* If we expect an interrupt for the next entry, tell host +* by writing event index and flush out the write before +* the read in the next get_buf call. */ +if (!(vq->vring.avail->flags &VRING_AVAIL_F_NO_INTERRUPT )) { +vring_used_event (&vq->vring) = vq->last_used_idx; +virtio_mb (); + } +Hmm, so you're still using the
avail->flags; it's just if thresholding is enabled the host will ignore it?
Quoted 1 line
It's a little subtle, but it keeps this patch small.
Right, that's exactly why I do it this way.
Quoted 4 lines
Perhaps we'll want to make it more explicit later.
Thanks,
Rusty.
Yes, e.g. it might be better to avoid touching that cache line, and track the current status in a private field in the guest. But I was unable to measure any effect from doing it either way.
Signature · 1 line
MST
Re: [PATCH 08/18] virtio_ring: support for used_event idx feature
In reply to Michael S. TsirkinQuoted 15 lines · Michael S. Tsirkin
Add support for the
used_eventidx feature: when enabling interrupts, publish the current avail index value to the host so that we get interrupts on the next update.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)drivers/virtio/virtio_ring.c +0
-0@@ -320,6 +320,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i];
drivers/virtio/virtio_ring.c void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) · line 330
Quoted 10 lines
drivers/virtio/virtio_ring.c +8
-0detach_buf (vq, i); vq->last_used_idx++; +/* If we expect an interrupt for the next entry, tell host +* by writing event index and flush out the write before +* the read in the next get_buf call. */ +if (!(vq->vring.avail->flags &VRING_AVAIL_F_NO_INTERRUPT )) { +vring_used_event (&vq->vring) = vq->last_used_idx; +virtio_mb (); + } +
Hmm, so you're still using the avail->flags; it's just if thresholding is enabled the host will ignore it?
It's a little subtle, but it keeps this patch small. Perhaps we'll want to make it more explicit later.
Thanks,
Rusty.
Michael S. Tsirkin
maintainerPATCH 9/18 virtio: use avail_event index
In reply to Michael S. TsirkinUse the new avail_event feature to reduce the number of exits from the guest.
--- drivers/virtio/virtio_ring.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +38 -1
@@ -82,6 +82,15 @@ struct vring_virtqueue/* Host supports indirect buffers */ bool indirect; +/* Host publishes avail event idx */ +bool event; + +/* Is kicked_avail below valid? */ +bool kicked_avail_valid; + +/* avail idx value we already kicked. */ +u16 kicked_avail; +/* Number of free buffers */ unsigned int num_free;/* Head of free buffer list. */
@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);
@@ -236,6 +251,23 @@ add_head: }EXPORT_SYMBOL_GPL (virtqueue_add_buf_gfp); + +static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true; +return vring_need_event (vring_avail_event (&vq->vring), new, old); +} +void virtqueue_kick (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);
@@ -244,7 +276,7 @@ void virtqueue_kick(struct virtqueue *_vq)/* Need to update avail index before checking if we should notify */ virtio_mb (); -if (!(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY )) +if (vring_notify (vq))/* Prod other side to tell it about changes. */ vq->notify (&vq->vq);
@@ -437,6 +469,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->vq.name = name; vq->notify = notify; vq->broken = false; + vq->kicked_avail_valid = false; + vq->kicked_avail =0 ; vq->last_used_idx =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG
@@ -444,6 +478,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,#endif vq->indirect =virtio_has_feature (vdev,VIRTIO_RING_F_INDIRECT_DESC ); + vq->event =virtio_has_feature (vdev,VIRTIO_RING_F_AVAIL_EVENT_IDX );/* No callback? Tell other side not to bother us. */ if (!callback)
@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 09/18] virtio: use avail_event index
Quoted 30 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 39++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +9
-0@@ -82,6 +82,15 @@ struct vring_virtqueue/* Host supports indirect buffers */ bool indirect; +/* Host publishes avail event idx */ +bool event; + +/* Is kicked_avail below valid? */ +bool kicked_avail_valid; + +/* avail idx value we already kicked. */ +u16 kicked_avail; +/* Number of free buffers */ unsigned int num_free;/* Head of free buffer list. */
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 9 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
vq->kicked_avail_valid should be set to false here.
Tom
Quoted 62 lines
drivers/virtio/virtio_ring.c +23
-1pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);@@ -236,6 +251,23 @@ add_head: }EXPORT_SYMBOL_GPL (virtqueue_add_buf_gfp); + +static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true; +return vring_need_event (vring_avail_event (&vq->vring), new, old); +} +void virtqueue_kick (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);@@ -244,7 +276,7 @@ void virtqueue_kick(struct virtqueue *_vq)/* Need to update avail index before checking if we should notify */ virtio_mb (); -if (!(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY )) +if (vring_notify (vq))/* Prod other side to tell it about changes. */ vq->notify (&vq->vq);@@ -437,6 +469,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->vq.name = name; vq->notify = notify; vq->broken = false; + vq->kicked_avail_valid = false; + vq->kicked_avail =0 ; vq->last_used_idx =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG @@ -444,6 +478,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,#endif vq->indirect =virtio_has_feature (vdev,VIRTIO_RING_F_INDIRECT_DESC ); + vq->event =virtio_has_feature (vdev,VIRTIO_RING_F_AVAIL_EVENT_IDX );/* No callback? Tell other side not to bother us. */ if (!callback)@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
Quoted 44 lines · Tom Lendacky
Quoted 30 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 39++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +9
-0@@ -82,6 +82,15 @@ struct vring_virtqueue/* Host supports indirect buffers */ bool indirect; +/* Host publishes avail event idx */ +bool event; + +/* Is kicked_avail below valid? */ +bool kicked_avail_valid; + +/* avail idx value we already kicked. */ +u16 kicked_avail; +/* Number of free buffers */ unsigned int num_free;/* Head of free buffer list. */ drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 9 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
vq->kicked_avail_validshould be set to false here.
Quoted 1 line
Tom
Right, good catch.
Quoted 62 lines
Quoted 62 lines
drivers/virtio/virtio_ring.c +23
-1pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);@@ -236,6 +251,23 @@ add_head: }EXPORT_SYMBOL_GPL (virtqueue_add_buf_gfp); + +static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true; +return vring_need_event (vring_avail_event (&vq->vring), new, old); +} +void virtqueue_kick (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);@@ -244,7 +276,7 @@ void virtqueue_kick(struct virtqueue *_vq)/* Need to update avail index before checking if we should notify */ virtio_mb (); -if (!(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY )) +if (vring_notify (vq))/* Prod other side to tell it about changes. */ vq->notify (&vq->vq);@@ -437,6 +469,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->vq.name = name; vq->notify = notify; vq->broken = false; + vq->kicked_avail_valid = false; + vq->kicked_avail =0 ; vq->last_used_idx =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG @@ -444,6 +478,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,#endif vq->indirect =virtio_has_feature (vdev,VIRTIO_RING_F_INDIRECT_DESC ); + vq->event =virtio_has_feature (vdev,VIRTIO_RING_F_AVAIL_EVENT_IDX );/* No callback? Tell other side not to bother us. */ if (!callback)@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Tom LendackyQuoted 44 lines · Tom Lendacky
Quoted 30 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 39++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +9
-0@@ -82,6 +82,15 @@ struct vring_virtqueue/* Host supports indirect buffers */ bool indirect; +/* Host publishes avail event idx */ +bool event; + +/* Is kicked_avail below valid? */ +bool kicked_avail_valid; + +/* avail idx value we already kicked. */ +u16 kicked_avail; +/* Number of free buffers */ unsigned int num_free;/* Head of free buffer list. */ drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 9 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
vq->kicked_avail_validshould be set to false here.
Quoted 1 line
Tom
Right, good catch.
Quoted 62 lines
Quoted 62 lines
drivers/virtio/virtio_ring.c +23
-1pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);@@ -236,6 +251,23 @@ add_head: }EXPORT_SYMBOL_GPL (virtqueue_add_buf_gfp); + +static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true; +return vring_need_event (vring_avail_event (&vq->vring), new, old); +} +void virtqueue_kick (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);@@ -244,7 +276,7 @@ void virtqueue_kick(struct virtqueue *_vq)/* Need to update avail index before checking if we should notify */ virtio_mb (); -if (!(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY )) +if (vring_notify (vq))/* Prod other side to tell it about changes. */ vq->notify (&vq->vq);@@ -437,6 +469,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->vq.name = name; vq->notify = notify; vq->broken = false; + vq->kicked_avail_valid = false; + vq->kicked_avail =0 ; vq->last_used_idx =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG @@ -444,6 +478,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,#endif vq->indirect =virtio_has_feature (vdev,VIRTIO_RING_F_INDIRECT_DESC ); + vq->event =virtio_has_feature (vdev,VIRTIO_RING_F_AVAIL_EVENT_IDX );/* No callback? Tell other side not to bother us. */ if (!callback)@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Michael S. TsirkinQuoted 30 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Signed-off-by Michael S. Tsirkin <[email protected]>--- drivers/virtio/virtio_ring.c | 39++++++++++++++++++++++++++++++++++++++- 1 files changed, 38 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +9
-0@@ -82,6 +82,15 @@ struct vring_virtqueue/* Host supports indirect buffers */ bool indirect; +/* Host publishes avail event idx */ +bool event; + +/* Is kicked_avail below valid? */ +bool kicked_avail_valid; + +/* avail idx value we already kicked. */ +u16 kicked_avail; +/* Number of free buffers */ unsigned int num_free;/* Head of free buffer list. */
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 9 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
vq->kicked_avail_valid should be set to false here.
Tom
Quoted 62 lines
drivers/virtio/virtio_ring.c +23
-1pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);@@ -236,6 +251,23 @@ add_head: }EXPORT_SYMBOL_GPL (virtqueue_add_buf_gfp); + +static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true; +return vring_need_event (vring_avail_event (&vq->vring), new, old); +} +void virtqueue_kick (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);@@ -244,7 +276,7 @@ void virtqueue_kick(struct virtqueue *_vq)/* Need to update avail index before checking if we should notify */ virtio_mb (); -if (!(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY )) +if (vring_notify (vq))/* Prod other side to tell it about changes. */ vq->notify (&vq->vq);@@ -437,6 +469,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->vq.name = name; vq->notify = notify; vq->broken = false; + vq->kicked_avail_valid = false; + vq->kicked_avail =0 ; vq->last_used_idx =0 ;list_add_tail (&vq->vq.list, &vdev->vqs);#ifdef DEBUG @@ -444,6 +478,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,#endif vq->indirect =virtio_has_feature (vdev,VIRTIO_RING_F_INDIRECT_DESC ); + vq->event =virtio_has_feature (vdev,VIRTIO_RING_F_AVAIL_EVENT_IDX );/* No callback? Tell other side not to bother us. */ if (!callback)@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Michael S. TsirkinQuoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.
Figures here would be nice :)
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 10 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
If they don't, they're already buggy. Simply do:
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
drivers/virtio/virtio_ring.c add_head: · line 267
Quoted 13 lines
drivers/virtio/virtio_ring.c +13
-0+static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true;
This is the only place you actually used kicked_avail_valid. Is it possible to initialize it in such a way that you can remove this?
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Does this belong in a prior patch?
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
Quoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
Quoted 12 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 10 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Hmm, but does it say that somewhere?
It seems that most drivers use locking to prevent posting more buffers while they drain the used ring, and also kick at least once in vq->num buffers, which I guess in the end would work out fine as vq num is never as large as 2^15.
Quoted 8 lines
Quoted 8 lines
drivers/virtio/virtio_ring.c +8
-0+static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid;
Quoted 8 lines
drivers/virtio/virtio_ring.c add_head: · line 267
Quoted 5 lines
drivers/virtio/virtio_ring.c +5
-0+ old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true;This is the only place you actually used
kicked_avail_valid. Is it possible to initialize it in such a way that you can remove this?
If we kill the code above as you suggested, likely yes. Maybe an explicit flag is more obvious?
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 2 lines
Thanks,
Rusty.
Well if we don't support the feature in the ring we should not ack the feature, right?
Re: [PATCH 09/18] virtio: use avail_event index
Quoted 8 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
Quoted 15 lines
Quoted 13 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 11 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.
Quoted 12 lines
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
Quoted 11 lines · Rusty Russell
Quoted 8 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
:)
Quoted 15 lines
Quoted 15 lines
Quoted 14 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 11 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Quoted 5 lines
Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.
Well one can imagine a driver doing:
while (virtqueue_get_buf()) {
virtqueue_add_buf()
}
virtqueue_kick()which looks sensible (batch kicks) but might
process any number of bufs between kicks.
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
Quoted 22 lines
Quoted 12 lines
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
Re: [PATCH 09/18] virtio: use avail_event index
Quoted 9 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()which looks sensible (batch kicks) but might
process any number of bufs between kicks.
No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
Quoted 8 lines · Rusty Russell
Quoted 7 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()
Quoted 7 lines
Quoted 2 lines
which looks sensible (batch kicks) but might
process any number of bufs between kicks.No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
Yes, I think we should - this way host and guest can process data in parallel without a kick.
My patchset included that simply because it's one index less to be confused about.
Quoted 9 lines
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 8 lines · Rusty Russell
Quoted 7 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()
Quoted 7 lines
Quoted 2 lines
which looks sensible (batch kicks) but might
process any number of bufs between kicks.No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
Yes, I think we should - this way host and guest can process data in parallel without a kick.
My patchset included that simply because it's one index less to be confused about.
Quoted 9 lines
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 8 lines · Rusty Russell
Quoted 7 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()
Quoted 7 lines
Quoted 2 lines
which looks sensible (batch kicks) but might
process any number of bufs between kicks.No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
That's actually what one of the early patches in the series did. I guess I can try and reorder the patches, I do believe it makes sense to publish immediately as this way
host can work in parallel with the guest.
Quoted 9 lines
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
I guess I'll just need to do the legwork and check then.
Signature · 1 line
MST
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 8 lines · Rusty Russell
Quoted 7 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()
Quoted 7 lines
Quoted 2 lines
which looks sensible (batch kicks) but might
process any number of bufs between kicks.No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
That's actually what one of the early patches in the series did. I guess I can try and reorder the patches, I do believe it makes sense to publish immediately as this way
host can work in parallel with the guest.
Quoted 9 lines
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
I guess I'll just need to do the legwork and check then.
Signature · 1 line
MST
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Michael S. TsirkinQuoted 9 lines · Michael S. Tsirkin
Well one can imagine a driver doing:
while (virtqueue_get_buf()) { virtqueue_add_buf() } virtqueue_kick()which looks sensible (batch kicks) but might
process any number of bufs between kicks.
No, we currently only expose the buffers in the kick, so it can only fill the ring doing that.
We could change that (and maybe that's worth looking at)...
Quoted 2 lines
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
I'm pretty sure we don't have this kind of 'echo' driver yet. Drivers tend to take OS requests and queue them. The only one which does anything even partially sophisticated is the net driver...
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 11 lines · Rusty Russell
Quoted 8 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
:)
Quoted 15 lines
Quoted 15 lines
Quoted 14 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 11 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Quoted 5 lines
Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.
Well one can imagine a driver doing:
while (virtqueue_get_buf()) {
virtqueue_add_buf()
}
virtqueue_kick()which looks sensible (batch kicks) but might
process any number of bufs between kicks.
If we look at drivers closely enough, I think none of them do the equivalent of the above, but not 100% sure.
Quoted 22 lines
Quoted 12 lines
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 1 line · Rusty Russell
On Sun, 15 May 2011 16:55:41 +0300, "Michael S. Tsirkin" <[email protected]>
Quoted 2 lines · wrote:
Quoted 2 lines · Rusty Russell
Quoted 1 line
On Wed, 4 May 2011 23:51:47 +0300, "Michael S. Tsirkin" <[email protected]>
Quoted 8 lines · wrote:
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
I'm working on getting some benchmark results for the patches. I should hopefully have something in the next day or two.
Tom
Quoted 54 lines
Quoted 17 lines
Quoted 15 lines
drivers/virtio/virtio_ring.c add_head: · line 247
Quoted 13 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.Quoted 17 lines
Quoted 17 lines
Quoted 4 lines
drivers/virtio/virtio_ring.c +0
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;drivers/virtio/virtio_ring.c void vring_transport_features(struct · line 524
Quoted 10 lines
drivers/virtio/virtio_ring.c +2
-0case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 1 line · Rusty Russell
On Sun, 15 May 2011 16:55:41 +0300, "Michael S. Tsirkin" <[email protected]>
Quoted 2 lines · wrote:
Quoted 2 lines · Rusty Russell
Quoted 1 line
On Wed, 4 May 2011 23:51:47 +0300, "Michael S. Tsirkin" <[email protected]>
Quoted 8 lines · wrote:
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
I'm working on getting some benchmark results for the patches. I should hopefully have something in the next day or two.
Tom
Quoted 54 lines
Quoted 17 lines
Quoted 15 lines
drivers/virtio/virtio_ring.c add_head: · line 247
Quoted 13 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.Quoted 17 lines
Quoted 17 lines
Quoted 4 lines
drivers/virtio/virtio_ring.c +0
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev) break;drivers/virtio/virtio_ring.c void vring_transport_features(struct · line 524
Quoted 10 lines
drivers/virtio/virtio_ring.c +2
-0case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Michael S. TsirkinQuoted 8 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
I mean benchmarks of some kind.
Quoted 15 lines
Quoted 13 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 11 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Quoted 1 line
Hmm, but does it say that somewhere?
AFAICT it's a corollary of:
1) You have a finite ring of size <= 2^16.
2) You need to kick the other side once you've done some work.
Quoted 12 lines
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 5 lines
Quoted 2 lines
Thanks,
Rusty.Well if we don't support the feature in the ring we should not ack the feature, right?
Ah, you're right.
Thanks,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 09/18] virtio: use avail_event index
In reply to Rusty RussellQuoted 5 lines · Rusty Russell
Quoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.Figures here would be nice :)
You mean ASCII art in comments?
Quoted 12 lines
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 10 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;If they don't, they're already buggy. Simply do:
Quoted 1 line
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
Hmm, but does it say that somewhere?
It seems that most drivers use locking to prevent posting more buffers while they drain the used ring, and also kick at least once in vq->num buffers, which I guess in the end would work out fine as vq num is never as large as 2^15.
Quoted 8 lines
Quoted 8 lines
drivers/virtio/virtio_ring.c +8
-0+static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid;
Quoted 8 lines
drivers/virtio/virtio_ring.c add_head: · line 267
Quoted 5 lines
drivers/virtio/virtio_ring.c +5
-0+ old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true;This is the only place you actually used
kicked_avail_valid. Is it possible to initialize it in such a way that you can remove this?
If we kill the code above as you suggested, likely yes. Maybe an explicit flag is more obvious?
Quoted 12 lines
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);Does this belong in a prior patch?
Quoted 2 lines
Thanks,
Rusty.
Well if we don't support the feature in the ring we should not ack the feature, right?
Re: [PATCH 09/18] virtio: use avail_event index
In reply to Michael S. TsirkinQuoted 2 lines · Michael S. Tsirkin
Use the new
avail_eventfeature to reduce the number of exits from the guest.
Figures here would be nice :)
drivers/virtio/virtio_ring.c add_head: · line 245
Quoted 10 lines
drivers/virtio/virtio_ring.c +6
-0@@ -228,6 +237,12 @@ add_head:* new available array entries. */ virtio_wmb (); vq->vring.avail->idx++; +/* If the driver never bothers to kick in a very long while, +* avail index might wrap around. If that happens, invalidate +* kicked_avail index we stored. TODO: make sure all drivers +* kick at least once in 2^16 and remove this. */ +if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) + vq->kicked_avail_valid = true;
If they don't, they're already buggy. Simply do:
WARN_ON(vq->vring.avail->idx == vq->kicked_avail);
drivers/virtio/virtio_ring.c add_head: · line 267
Quoted 13 lines
drivers/virtio/virtio_ring.c +13
-0+static bool vring_notify (struct vring_virtqueue *vq) +{ +u16 old, new; +bool v; +if (!vq->event) +return !(vq->vring.used->flags &VRING_USED_F_NO_NOTIFY ); + + v = vq->kicked_avail_valid; + old = vq->kicked_avail; + new = vq->kicked_avail = vq->vring.avail->idx; + vq->kicked_avail_valid = true; +if (unlikely (!v)) +return true;
This is the only place you actually used kicked_avail_valid. Is it possible to initialize it in such a way that you can remove this?
drivers/virtio/virtio_ring.c void vring_transport_features(struct virtio_device *vdev) · line 524
Quoted 9 lines
drivers/virtio/virtio_ring.c +2
-0@@ -482,6 +517,8 @@ void vring_transport_features(struct virtio_device *vdev)break ;case VIRTIO_RING_F_USED_EVENT_IDX :break ; +case VIRTIO_RING_F_AVAIL_EVENT_IDX : +break ;default :/* We don't understand this bit. */ clear_bit (i, vdev->features);
Does this belong in a prior patch?
Thanks,
Rusty.
Michael S. Tsirkin
maintainerPATCH 10/18 vhost: utilize used_event index
In reply to Michael S. TsirkinSupport the new used_event index. When acked, utilize it to reduce the # of interrupts sent to the guest.
--- drivers/vhost/vhost.c | 74 +++++++++++++++++++++++++++++++++++++------------ drivers/vhost/vhost.h | 7 ++++ 2 files changed, 63 insertions(+), 18 deletions(-)
drivers/vhost/vhost.c +56 -18
@@ -37,6 +37,8 @@ enum { VHOST_MEMORY_F_LOG = 0x1, }; +#define vhost_used_event (vq) ((u16 __user *)&vq->avail->ring[vq->num]) +static void vhost_poll_func (struct file *file,wait_queue_head_t *wqh,poll_table *pt) {
@@ -161,6 +163,8 @@ static void vhost_vq_reset(struct vhost_dev *dev, vq->last_avail_idx =0 ; vq->avail_idx =0 ; vq->last_used_idx =0 ; + vq->signalled_used =0 ; + vq->signalled_used_valid = false; vq->used_flags =0 ; vq->log_used = false; vq->log_addr =-1ull ;
@@ -489,14 +493,15 @@ static int memory_access_ok(struct vhost_dev *d, struct vhost_memory *mem,return 1 ; } -static int vq_access_ok (unsigned int num, +static int vq_access_ok (struct vhost_dev *d,unsigned int num,struct vring_desc __user *desc,struct vring_avail __user *avail,struct vring_used __user *used) { +size_t sa =vhost_has_feature (d,VIRTIO_RING_F_USED_EVENT_IDX ) ?2 :0 ;return access_ok (VERIFY_READ , desc, num *sizeof *desc) &&access_ok (VERIFY_READ , avail, -sizeof *avail + num *sizeof *avail->ring) && +sizeof *avail + num *sizeof *avail->ring + sa) &&access_ok (VERIFY_WRITE , used,sizeof *used + num *sizeof *used->ring); }
@@ -531,7 +536,7 @@ static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base)/* Caller should have vq mutex and device mutex */ int vhost_vq_access_ok (struct vhost_virtqueue *vq) { -return vq_access_ok (vq->num, vq->desc, vq->avail, vq->used) && +return vq_access_ok (vq->dev, vq->num, vq->desc, vq->avail, vq->used) &&vq_log_access_ok (vq, vq->log_base); }
@@ -577,6 +582,7 @@ static int init_used(struct vhost_virtqueue *vq,if (r)return r; + vq->signalled_used_valid = false;return get_user (vq->last_used_idx, &used->idx); }
@@ -674,7 +680,7 @@ static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp)* If it is not, we don't as size might not have been setup. * We will verify when backend is configured. */ if (vq->private_data) { -if (!vq_access_ok (vq->num, +if (!vq_access_ok (d, vq->num, (void __user *)(unsigned long )a.desc_user_addr, (void __user *)(unsigned long )a.avail_user_addr, (void __user *)(unsigned long )a.used_user_addr)) {
@@ -1267,6 +1273,12 @@ int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len)eventfd_signal (vq->log_ctx,1 ); } vq->last_used_idx++; +/* If the driver never bothers to signal in a very long while, +* used index might wrap around. If that happens, invalidate +* signalled_used index we stored. TODO: make sure driver +* signals at least once in 2^16 and remove this. */ +if (unlikely (vq->last_used_idx == vq->signalled_used)) + vq->signalled_used_valid = false;return 0 ; }
@@ -1275,6 +1287,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, unsigned count) {struct vring_used_elem __user *used; +u16 old, new;int start; start = vq->last_used_idx % vq->num;
@@ -1292,7 +1305,14 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, ((void __user *)used - (void __user *)vq->used), count * sizeof *used); } - vq->last_used_idx += count; + old = vq->last_used_idx; + new = (vq->last_used_idx += count); +/* If the driver never bothers to signal in a very long while, +* used index might wrap around. If that happens, invalidate +* signalled_used index we stored. TODO: make sure driver +* signals at least once in 2^16 and remove this. */ +if (unlikely ((u16)(new - vq->signalled_used) < (u16)(new - old))) + vq->signalled_used_valid = false;return 0 ; }
@@ -1331,29 +1351,47 @@ int vhost_add_used_n(struct vhost_virtqueue *vq, struct vring_used_elem *heads,return r; } -/* This actually signals the guest, using eventfd. */ -void vhost_signal (struct vhost_dev *dev,struct vhost_virtqueue *vq) +static bool vhost_notify (struct vhost_dev *dev,struct vhost_virtqueue *vq) { -__u16 flags; - +__u16 old, new, event; +bool v;/* Flush out used index updates. This is paired * with the barrier that the Guest executes when enabling * interrupts. */ smp_mb (); -if (__get_user (flags, &vq->avail->flags)) { -vq_err (vq,"Failed to get flags" ); -return ; +if (vhost_has_feature (dev,VIRTIO_F_NOTIFY_ON_EMPTY ) && +unlikely (vq->avail_idx == vq->last_avail_idx)) +return true; + +if (!vhost_has_feature (dev,VIRTIO_RING_F_USED_EVENT_IDX )) { +__u16 flags; +if (__get_user (flags, &vq->avail->flags)) { +vq_err (vq,"Failed to get flags" ); +return true; + } +return !(flags &VRING_AVAIL_F_NO_INTERRUPT ); } + old = vq->signalled_used; + v = vq->signalled_used_valid; + new = vq->signalled_used = vq->last_used_idx; + vq->signalled_used_valid = true; -/* If they don't want an interrupt, don't signal, unless empty. */ -if ((flags &VRING_AVAIL_F_NO_INTERRUPT ) && - (vq->avail_idx != vq->last_avail_idx || - !vhost_has_feature (dev,VIRTIO_F_NOTIFY_ON_EMPTY ))) -return ; +if (unlikely (!v)) +return true; + +if (get_user (event,vhost_used_event (vq))) { +vq_err (vq,"Failed to get used event idx" ); +return true; + } +return vring_need_event (event, new, old); +} +/* This actually signals the guest, using eventfd. */ +void vhost_signal (struct vhost_dev *dev,struct vhost_virtqueue *vq) +{/* Signal the Guest tell them we used something up. */ -if (vq->call_ctx) +if (vq->call_ctx &&vhost_notify (dev, vq))eventfd_signal (vq->call_ctx,1 ); }
drivers/vhost/vhost.h +7 -0
@@ -84,6 +84,12 @@ struct vhost_virtqueue {/* Used flags */ u16 used_flags; +/* Last used index value we have signalled on */ +u16 signalled_used; + +/* Last used index value we have signalled on */ +bool signalled_used_valid; +/* Log writes to used structure. */ bool log_used;u64 log_addr;
@@ -164,6 +170,7 @@ int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,enum {VHOST_FEATURES = (1 <<VIRTIO_F_NOTIFY_ON_EMPTY ) | (1 <<VIRTIO_RING_F_INDIRECT_DESC ) | + (1 <<VIRTIO_RING_F_USED_EVENT_IDX ) | (1 <<VHOST_F_LOG_ALL ) | (1 <<VHOST_NET_F_VIRTIO_NET_HDR ) | (1 <<VIRTIO_NET_F_MRG_RXBUF ),
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 11/18 vhost: support avail_event idx
In reply to Michael S. TsirkinAdd support for the new avail_event feature in vhost_net and vhost test modules.
--- drivers/vhost/net.c | 12 ++++---- drivers/vhost/test.c | 6 ++-- drivers/vhost/vhost.c | 65 +++++++++++++++++++++++++++++++++++++------------ drivers/vhost/vhost.h | 17 +++++++------ 4 files changed, 67 insertions(+), 33 deletions(-)
drivers/vhost/net.c +6 -6
@@ -144,7 +144,7 @@ static void handle_tx(struct vhost_net *net) }mutex_lock (&vq->mutex); -vhost_disable_notify (vq); +vhost_disable_notify (&net->dev, vq);if (wmem < sock->sk->sk_sndbuf /2 )tx_poll_stop (net);
@@ -166,8 +166,8 @@ static void handle_tx(struct vhost_net *net)set_bit (SOCK_ASYNC_NOSPACE , &sock->flags);break ; } -if (unlikely (vhost_enable_notify (vq))) { -vhost_disable_notify (vq); +if (unlikely (vhost_enable_notify (&net->dev, vq))) { +vhost_disable_notify (&net->dev, vq);continue ; }break ;
@@ -315,7 +315,7 @@ static void handle_rx(struct vhost_net *net)return ;mutex_lock (&vq->mutex); -vhost_disable_notify (vq); +vhost_disable_notify (&net->dev, vq); vhost_hlen = vq->vhost_hlen; sock_hlen = vq->sock_hlen;
@@ -334,10 +334,10 @@ static void handle_rx(struct vhost_net *net)break ;/* OK, now we need to know about added descriptors. */ if (!headcount) { -if (unlikely (vhost_enable_notify (vq))) { +if (unlikely (vhost_enable_notify (&net->dev, vq))) {/* They have slipped one in as we were * doing that: check again. */ -vhost_disable_notify (vq); +vhost_disable_notify (&net->dev, vq);continue ; }/* Nothing new? Wait for eventfd to tell us
drivers/vhost/test.c +3 -3
@@ -49,7 +49,7 @@ static void handle_vq(struct vhost_test *n)return ;mutex_lock (&vq->mutex); -vhost_disable_notify (vq); +vhost_disable_notify (&n->dev, vq);for (;;) { head = vhost_get_vq_desc(&n->dev, vq, vq->iov,
@@ -61,8 +61,8 @@ static void handle_vq(struct vhost_test *n)break ;/* Nothing new? Wait for eventfd to tell us they refilled. */ if (head == vq->num) { -if (unlikely (vhost_enable_notify (vq))) { -vhost_disable_notify (vq); +if (unlikely (vhost_enable_notify (&n->dev, vq))) { +vhost_disable_notify (&n->dev, vq);continue ; }break ;
drivers/vhost/vhost.c +49 -16
135 lines not on this page · raw message
drivers/vhost/vhost.h +9 -8
@@ -155,8 +155,8 @@ void vhost_add_used_and_signal(struct vhost_dev *, struct vhost_virtqueue *,void vhost_add_used_and_signal_n (struct vhost_dev *,struct vhost_virtqueue *,struct vring_used_elem *heads,unsigned count);void vhost_signal (struct vhost_dev *,struct vhost_virtqueue *); -void vhost_disable_notify (struct vhost_virtqueue *); -bool vhost_enable_notify (struct vhost_virtqueue *); +void vhost_disable_notify (struct vhost_dev *,struct vhost_virtqueue *); +bool vhost_enable_notify (struct vhost_dev *,struct vhost_virtqueue *);int vhost_log_write (struct vhost_virtqueue *vq,struct vhost_log *log,unsigned int log_num,u64 len);
@@ -168,12 +168,13 @@ int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, }while (0 ) enum { -VHOST_FEATURES = (1 <<VIRTIO_F_NOTIFY_ON_EMPTY ) | - (1 <<VIRTIO_RING_F_INDIRECT_DESC ) | - (1 <<VIRTIO_RING_F_USED_EVENT_IDX ) | - (1 <<VHOST_F_LOG_ALL ) | - (1 <<VHOST_NET_F_VIRTIO_NET_HDR ) | - (1 << VIRTIO_NET_F_MRG_RXBUF), +VHOST_FEATURES = (1ULL <<VIRTIO_F_NOTIFY_ON_EMPTY ) | + (1ULL <<VIRTIO_RING_F_INDIRECT_DESC ) | + (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ) | + (1ULL <<VIRTIO_RING_F_AVAIL_EVENT_IDX ) | + (1ULL <<VHOST_F_LOG_ALL ) | + (1ULL <<VHOST_NET_F_VIRTIO_NET_HDR ) | + (1ULL << VIRTIO_NET_F_MRG_RXBUF), };static inline bool vhost_has_feature (struct vhost_dev *dev,int bit)
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 12/18 virtio_test: support used_event index
In reply to Michael S. TsirkinAdd ability to test the new used_event feature,
enable by default.
--- tools/virtio/virtio_test.c | 18 ++++++++++++++++-- 1 files changed, 16 insertions(+), 2 deletions(-)
tools/virtio/virtio_test.c +16 -2
@@ -210,18 +210,29 @@ const struct option longopts[] = { .val = 'i', }, { + .name = "used-event-idx", + .val = 'U', + }, + { + .name = "no-used-event-idx", + .val = 'u', + }, + { } };static void help () { -fprintf (stderr,"Usage: virtio_test [--help] [--no-indirect]\n" ); +fprintf (stderr,"Usage: virtio_test [--help]" +" [--no-indirect] " +" [--no-used-event-idx]\n" ); }int main (int argc,char **argv) {struct vdev_info dev; -unsigned long long features =1ULL <<VIRTIO_RING_F_INDIRECT_DESC ; +unsigned long long features = (1ULL <<VIRTIO_RING_F_INDIRECT_DESC ) | + (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX );int o;for (;;) {
@@ -238,6 +249,9 @@ int main(int argc, char **argv)case 'i' : features &= ~(1ULL <<VIRTIO_RING_F_INDIRECT_DESC );break ; +case 'u' : + features &= ~(1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ); +break ;default :assert (0 );break ;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 13/18 virtio_test: avail_event index support
In reply to Michael S. TsirkinAdd ability to test the new avail_event feature,
enable by default.
--- tools/virtio/virtio_test.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-)
tools/virtio/virtio_test.c +15 -2
@@ -202,6 +202,14 @@ const struct option longopts[] = { .val = 'h', }, { + .name = "avail-event-idx", + .val = 'A', + }, + { + .name = "no-avail-event-idx", + .val = 'a', + }, + { .name = "indirect", .val = 'I', },
@@ -224,7 +232,8 @@ const struct option longopts[] = {static void help () {fprintf (stderr,"Usage: virtio_test [--help]" -" [--no-indirect] " +" [--no-indirect]" +" [--no-avail-event-idx]" " [--no-used-event-idx]\n" ); }
@@ -232,7 +241,8 @@ int main(int argc, char **argv) {struct vdev_info dev;unsigned long long features = (1ULL <<VIRTIO_RING_F_INDIRECT_DESC ) | - (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ); + (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ) | + (1ULL <<VIRTIO_RING_F_AVAIL_EVENT_IDX );int o;for (;;) {
@@ -243,6 +253,9 @@ int main(int argc, char **argv)case '?' :help ();exit (2 ); +case 'a' : + features &= ~(1ULL <<VIRTIO_RING_F_AVAIL_EVENT_IDX ); +break ;case 'h' :help (); goto done;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 13/18 virtio_test: avail_event index support
In reply to Michael S. TsirkinAdd ability to test the new avail_event feature,
enable by default.
--- tools/virtio/virtio_test.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-)
tools/virtio/virtio_test.c +15 -2
@@ -202,6 +202,14 @@ const struct option longopts[] = { .val = 'h', }, { + .name = "avail-event-idx", + .val = 'A', + }, + { + .name = "no-avail-event-idx", + .val = 'a', + }, + { .name = "indirect", .val = 'I', },
@@ -224,7 +232,8 @@ const struct option longopts[] = {static void help () {fprintf (stderr,"Usage: virtio_test [--help]" -" [--no-indirect] " +" [--no-indirect]" +" [--no-avail-event-idx]" " [--no-used-event-idx]\n" ); }
@@ -232,7 +241,8 @@ int main(int argc, char **argv) {struct vdev_info dev;unsigned long long features = (1ULL <<VIRTIO_RING_F_INDIRECT_DESC ) | - (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ); + (1ULL <<VIRTIO_RING_F_USED_EVENT_IDX ) | + (1ULL <<VIRTIO_RING_F_AVAIL_EVENT_IDX );int o;for (;;) {
@@ -243,6 +253,9 @@ int main(int argc, char **argv)case '?' :help ();exit (2 ); +case 'a' : + features &= ~(1ULL <<VIRTIO_RING_F_AVAIL_EVENT_IDX ); +break ;case 'h' :help (); goto done;
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 14/18 virtio: add api for delayed callbacks
In reply to Michael S. TsirkinAdd an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new used_event feature.
--- drivers/virtio/virtio_ring.c | 27 +++++++++++++++++++++++++++ include/linux/virtio.h | 9 +++++++++ 2 files changed, 36 insertions(+), 0 deletions(-)
drivers/virtio/virtio_ring.c +27 -0
@@ -397,6 +397,33 @@ bool virtqueue_enable_cb(struct virtqueue *_vq) }EXPORT_SYMBOL_GPL (virtqueue_enable_cb); +bool virtqueue_enable_cb_delayed (struct virtqueue *_vq) +{ +struct vring_virtqueue *vq =to_vvq (_vq); +int bufs; + +START_USE (vq); + +/* We optimistically turn back on interrupts, then check if there was +* more to do. */ +/* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to +* either clear the flags bit or point the event index at the next +* entry. Always do both to keep code simple. */ + vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT ; +/* TODO: tune this threshold */ + bufs = (vq->vring.avail->idx - vq->last_used_idx) *3 /4 ; +vring_used_event (&vq->vring) = vq->last_used_idx + bufs; +virtio_mb (); +if (unlikely (vq->vring.used->idx - vq->last_used_idx > bufs)) { +END_USE (vq); +return false; + } + +END_USE (vq); +return true; +} +EXPORT_SYMBOL_GPL (virtqueue_enable_cb_delayed); +void *virtqueue_detach_unused_buf (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);
include/linux/virtio.h +9 -0
@@ -51,6 +51,13 @@ struct virtqueue {* This re-enables callbacks; it returns "false" if there are pending * buffers in the queue, to detect a possible race between the driver * checking for more work, and enabling callbacks. +* virtqueue_enable_cb_delayed: restart callbacks after disable_cb. +* vq: the struct virtqueue we're talking about. +* This re-enables callbacks but hints to the other side to delay +* interrupts until most of the available buffers have been processed; +* it returns "false" if there are many pending buffers in the queue, +* to detect a possible race between the driver checking for more work, +* and enabling callbacks. * virtqueue_detach_unused_buf: detach first unused buffer * vq: the struct virtqueue we're talking about. * Returns NULL or the "data" token handed to add_buf
@@ -86,6 +93,8 @@ void virtqueue_disable_cb(struct virtqueue *vq);bool virtqueue_enable_cb (struct virtqueue *vq); +bool virtqueue_enable_cb_delayed (struct virtqueue *vq); +void *virtqueue_detach_unused_buf (struct virtqueue *vq);/**
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 14/18] virtio: add api for delayed callbacks
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.
Since you're going to add a capacity query anyway, why not add the threshold argument here?
Then the caller can choose how much space it needs. Maybe net and block will want different things...
Cheers,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 14/18] virtio: add api for delayed callbacks
Quoted 7 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 6 lines
Then the caller can choose how much space it needs. Maybe net and block will want different things...
Cheers,
Rusty.
Hmm, maybe. OK.
Signature · 1 line
MST
Re: [PATCH 14/18] virtio: add api for delayed callbacks
Quoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.
Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 14/18] virtio: add api for delayed callbacks
Quoted 15 lines · Rusty Russell
Quoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 5 lines
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
I tried doing that and remembered the real reason I went for this API:
capacity is limited by descriptor table space, not
used ring space: each entry in the used ring frees up multiple entries in the descriptor ring. Thus the ring can't provide callback after capacity is N: capacity is only available after we get bufs.
We could try and make the API pass in the number of freed bufs, however:
- this is not really what virtio-net cares about (it cares about capacity)
- if the driver passes a number > number of outstanding bufs, it will never get a callback. So to stay correct the driver will need to track number of outstanding requests. The simpler API avoids that.
APIs are easy to change so I'm guessing it's not a major blocker:
we can change later when e.g. block tries to
pass in some kind of extra hint: we'll be smarter
about how this API can change then.
Right?
Signature · 1 line
MST
Re: [PATCH 14/18] virtio: add api for delayed callbacks
Quoted 23 lines · Michael S. Tsirkin
Quoted 15 lines · Rusty Russell
Quoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 5 lines
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
Quoted 7 lines
I tried doing that and remembered the real reason I went for this API:
capacity is limited by descriptor table space, not
used ring space: each entry in the used ring frees up multiple entries in the descriptor ring. Thus the ring can't provide callback after capacity is N: capacity is only available after we get bufs.
I think this indicates a problem, but I haven't reviewed your patches except very cursorily. I am slack...
Quoted 3 lines
We could try and make the API pass in the number of freed bufs, however:
- this is not really what virtio-net cares about (it cares about capacity)
Yes, max sg elements and max requests are separate, though in the current virtio implementation remaining sg <= remaining request slots.
That's why we currently feed back remaining descriptors to the driver, not the number of request slots.
This implies that the thresholds should refer to descriptor numbers (ie. wake me when there are this many descriptors freed), not the used ring at all. Which means we're barking up the wrong tree...
I think this needs more thought.
Quoted 3 lines
- if the driver passes a number > number of outstanding bufs, it will never get a callback. So to stay correct the driver will need to track number of outstanding requests. The simpler API avoids that.
I think the driver should simply say "wake me when you have this many descriptors free". And set it during initialization, rather than every time. The virtio_ring code should handle it from there.
Perhaps that can be done with the current technique, where the virtio_ring makes an educated guess on when sufficient capacity will be available...
Cheers,
Rusty.
Re: [PATCH 14/18] virtio: add api for delayed callbacks
In reply to Michael S. TsirkinQuoted 23 lines · Michael S. Tsirkin
Quoted 15 lines · Rusty Russell
Quoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 5 lines
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
Quoted 7 lines
I tried doing that and remembered the real reason I went for this API:
capacity is limited by descriptor table space, not
used ring space: each entry in the used ring frees up multiple entries in the descriptor ring. Thus the ring can't provide callback after capacity is N: capacity is only available after we get bufs.
I think this indicates a problem, but I haven't reviewed your patches except very cursorily. I am slack...
Quoted 3 lines
We could try and make the API pass in the number of freed bufs, however:
- this is not really what virtio-net cares about (it cares about capacity)
Yes, max sg elements and max requests are separate, though in the current virtio implementation remaining sg <= remaining request slots.
That's why we currently feed back remaining descriptors to the driver, not the number of request slots.
This implies that the thresholds should refer to descriptor numbers (ie. wake me when there are this many descriptors freed), not the used ring at all. Which means we're barking up the wrong tree...
I think this needs more thought.
Quoted 3 lines
- if the driver passes a number > number of outstanding bufs, it will never get a callback. So to stay correct the driver will need to track number of outstanding requests. The simpler API avoids that.
I think the driver should simply say "wake me when you have this many descriptors free". And set it during initialization, rather than every time. The virtio_ring code should handle it from there.
Perhaps that can be done with the current technique, where the virtio_ring makes an educated guess on when sufficient capacity will be available...
Cheers,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 14/18] virtio: add api for delayed callbacks
In reply to Rusty RussellQuoted 15 lines · Rusty Russell
Quoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 5 lines
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
I tried doing that and remembered the real reason I went for this API:
capacity is limited by descriptor table space, not
used ring space: each entry in the used ring frees up multiple entries in the descriptor ring. Thus the ring can't provide callback after capacity is N: capacity is only available after we get bufs.
We could try and make the API pass in the number of freed bufs, however:
- this is not really what virtio-net cares about (it cares about capacity)
- if the driver passes a number > number of outstanding bufs, it will never get a callback. So to stay correct the driver will need to track number of outstanding requests. The simpler API avoids that.
APIs are easy to change so I'm guessing it's not a major blocker:
we can change later when e.g. block tries to
pass in some kind of extra hint: we'll be smarter
about how this API can change then.
Right?
Signature · 1 line
MST
Re: [PATCH 14/18] virtio: add api for delayed callbacks
In reply to Michael S. TsirkinQuoted 6 lines · Michael S. Tsirkin
Quoted 5 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.
Quoted 7 lines
Quoted 2 lines
Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
No, it's always a hint anyway: you can be notified before the threshold is reached. But best make it explicit I think.
Cheers,
Rusty.
Michael S. Tsirkin
maintainerRe: [PATCH 14/18] virtio: add api for delayed callbacks
In reply to Rusty RussellQuoted 7 lines · Rusty Russell
Quoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.Since you're going to add a capacity query anyway, why not add the threshold argument here?
I thought that if we keep the API kind of generic there might be more of a chance that future transports will be able to implement it. For example, with an old host we can't commit to a specific index.
Quoted 6 lines
Then the caller can choose how much space it needs. Maybe net and block will want different things...
Cheers,
Rusty.
Hmm, maybe. OK.
Signature · 1 line
MST
Re: [PATCH 14/18] virtio: add api for delayed callbacks
In reply to Michael S. TsirkinQuoted 3 lines · Michael S. Tsirkin
Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new
used_eventfeature.
Since you're going to add a capacity query anyway, why not add the threshold argument here?
Then the caller can choose how much space it needs. Maybe net and block will want different things...
Cheers,
Rusty.
Michael S. Tsirkin
maintainerPATCH 15/18 virtio_net: delay TX callbacks
In reply to Michael S. TsirkinAsk for delayed callbacks on TX ring full, to give the other side more of a chance to make progress.
--- drivers/net/virtio_net.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/virtio_net.c +1 -1
@@ -609,7 +609,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)* before it gets out of hand. Naturally, this wastes entries. */ if (capacity <2 +MAX_SKB_FRAGS ) {netif_stop_queue (dev); -if (unlikely (!virtqueue_enable_cb (vi->svq))) { +if (unlikely (!virtqueue_enable_cb_delayed (vi->svq))) {/* More just got used, free them then recheck. */ capacity +=free_old_xmit_skbs (vi);if (capacity >=2 +MAX_SKB_FRAGS ) {
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 15/18 virtio_net: delay TX callbacks
In reply to Michael S. TsirkinAsk for delayed callbacks on TX ring full, to give the other side more of a chance to make progress.
--- drivers/net/virtio_net.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/virtio_net.c +1 -1
@@ -609,7 +609,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)* before it gets out of hand. Naturally, this wastes entries. */ if (capacity <2 +MAX_SKB_FRAGS ) {netif_stop_queue (dev); -if (unlikely (!virtqueue_enable_cb (vi->svq))) { +if (unlikely (!virtqueue_enable_cb_delayed (vi->svq))) {/* More just got used, free them then recheck. */ capacity +=free_old_xmit_skbs (vi);if (capacity >=2 +MAX_SKB_FRAGS ) {
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 16/18 virtio_ring: Add capacity check API
In reply to Michael S. TsirkinQuoted 1 line
From: Shirley Ma <[email protected]>
---
I'm not sure who wrote this first anymore :)
But it's a simple patch.
drivers/virtio/virtio_ring.c | 8 ++++++++ include/linux/virtio.h | 5 +++++ 2 files changed, 13 insertions(+), 0 deletions(-)
drivers/virtio/virtio_ring.c +8 -0
@@ -365,6 +365,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) }EXPORT_SYMBOL_GPL (virtqueue_get_buf); +int virtqueue_get_capacity (struct virtqueue *_vq) +{ +struct vring_virtqueue *vq =to_vvq (_vq); + +return vq->num_free; +} +EXPORT_SYMBOL_GPL (virtqueue_get_capacity); +void virtqueue_disable_cb (struct virtqueue *_vq) {struct vring_virtqueue *vq =to_vvq (_vq);
include/linux/virtio.h +5 -0
@@ -42,6 +42,9 @@ struct virtqueue {* vq: the struct virtqueue we're talking about. * len: the length written into the buffer * Returns NULL or the "data" token handed to add_buf. +* virtqueue_get_capacity: get the current capacity of the queue +* vq: the struct virtqueue we're talking about. +* Returns remaining capacity of the queue. * virtqueue_disable_cb: disable callbacks * vq: the struct virtqueue we're talking about. * Note that this is not necessarily synchronous, hence unreliable and only
@@ -89,6 +92,8 @@ void virtqueue_kick(struct virtqueue *vq);void *virtqueue_get_buf (struct virtqueue *vq,unsigned int *len); +int virtqueue_get_capacity (struct virtqueue *vq); +void virtqueue_disable_cb (struct virtqueue *vq);bool virtqueue_enable_cb (struct virtqueue *vq);
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 17/18 virtio_net: fix TX capacity checks using new API
In reply to Michael S. Tsirkinvirtio net uses the number of sg entries to check for TX ring capacity freed. But this gives incorrect results when indirect buffers are used. Use the new capacity API instead.
--- drivers/net/virtio_net.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-)
drivers/net/virtio_net.c +4 -5
@@ -509,19 +509,17 @@ again:return received; } -static unsigned int free_old_xmit_skbs (struct virtnet_info *vi) +static void free_old_xmit_skbs (struct virtnet_info *vi) {struct sk_buff *skb; -unsigned int len, tot_sgs =0 ; +unsigned int len;while ((skb =virtqueue_get_buf (vi->svq, &len)) !=NULL ) {pr_debug ("Sent skb %p\n" , skb); vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++; - tot_sgs +=skb_vnet_hdr (skb)->num_sg;dev_kfree_skb_any (skb); } -return tot_sgs; }static int xmit_skb (struct virtnet_info *vi,struct sk_buff *skb)
@@ -611,7 +609,8 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)netif_stop_queue (dev);if (unlikely (!virtqueue_enable_cb_delayed (vi->svq))) {/* More just got used, free them then recheck. */ - capacity +=free_old_xmit_skbs (vi); +free_old_xmit_skbs (vi); + capacity =virtqueue_get_capacity (vi->svq);if (capacity >=2 +MAX_SKB_FRAGS ) {netif_start_queue (dev);virtqueue_disable_cb (vi->svq);
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 18/18 virtio_net: limit xmit polling
In reply to Michael S. TsirkinCurrent code might introduce a lot of latency variation if there are many pending bufs at the time we attempt to transmit a new one. This is bad for real-time applications and can't be good for TCP either.
Free up just enough to both clean up all buffers eventually and to be able to xmit the next packet.
--- drivers/net/virtio_net.c | 18 +++++++++++------- 1 files changed, 11 insertions(+), 7 deletions(-)
drivers/net/virtio_net.c +11 -7
@@ -509,17 +509,23 @@ again:return received; } -static void free_old_xmit_skbs (struct virtnet_info *vi) +static bool free_old_xmit_skbs (struct virtnet_info *vi,int capacity) {struct sk_buff *skb;unsigned int len; +bool c; +/* We try to free up at least 2 skbs per one sent, so that we'll get +* all of the memory back if they are used fast enough. */ +int n =2 ; -while ((skb =virtqueue_get_buf (vi->svq, &len)) !=NULL ) { +while ((c =virtqueue_get_capacity (vi->svq) >= capacity) && --n >0 && + (skb =virtqueue_get_buf (vi->svq, &len)) !=NULL ) {pr_debug ("Sent skb %p\n" , skb); vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++;dev_kfree_skb_any (skb); } +return c; }static int xmit_skb (struct virtnet_info *vi,struct sk_buff *skb)
@@ -574,8 +580,8 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)struct virtnet_info *vi =netdev_priv (dev);int capacity; -/* Free up any pending old buffers before queueing new ones. */ -free_old_xmit_skbs (vi); +/* Free enough pending old buffers to enable queueing new ones. */ +free_old_xmit_skbs (vi,2 +MAX_SKB_FRAGS );/* Try to transmit */ capacity =xmit_skb (vi, skb);
@@ -609,9 +615,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)netif_stop_queue (dev);if (unlikely (!virtqueue_enable_cb_delayed (vi->svq))) {/* More just got used, free them then recheck. */ -free_old_xmit_skbs (vi); - capacity =virtqueue_get_capacity (vi->svq); -if (capacity >=2 +MAX_SKB_FRAGS ) { +if (!likely (free_old_xmit_skbs (vi,2 +MAX_SKB_FRAGS ))) {netif_start_queue (dev);virtqueue_disable_cb (vi->svq); }
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainercover virtio and vhost-net performance enhancements
In reply to Michael S. TsirkinHere are a couple of minor fixes suggested on list. Applies on top of the previous patchset.
As before result pushed here:git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git vhost-net-next-event-idx-v1
Michael S. Tsirkin (3):
virtio: fix avail event support
virtio_ring: check used_event offset
virtio_ring: need_event api comment fix
drivers/virtio/virtio_ring.c | 2 +- include/linux/virtio_ring.h | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 1/3 virtio: fix avail event support
make valid flag false, not true, on overrun
--- drivers/virtio/virtio_ring.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +1 -1
@@ -242,7 +242,7 @@ add_head:* kicked_avail index we stored. TODO: make sure all drivers * kick at least once in 2^16 and remove this. */ if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) - vq->kicked_avail_valid = true; + vq->kicked_avail_valid = false;pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 1/3 virtio: fix avail event support
In reply to Michael S. Tsirkinmake valid flag false, not true, on overrun
--- drivers/virtio/virtio_ring.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/virtio/virtio_ring.c +1 -1
@@ -242,7 +242,7 @@ add_head:* kicked_avail index we stored. TODO: make sure all drivers * kick at least once in 2^16 and remove this. */ if (unlikely (vq->vring.avail->idx == vq->kicked_avail)) - vq->kicked_avail_valid = true; + vq->kicked_avail_valid = false;pr_debug ("Added buffer head %i to %p\n" , head, vq);END_USE (vq);
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 2/3 virtio_ring: check used_event offset
In reply to Michael S. TsirkinNothing's wrong with vring_size as is, but it's nice to check that the new field in the avail ring won't overlow into the used ring.
--- include/linux/virtio_ring.h | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
include/linux/virtio_ring.h +7 -1
@@ -119,7 +119,13 @@ static inline void vring_init(struct vring *vr, unsigned int num, void *p,static inline unsigned vring_size (unsigned int num,unsigned long align) { -return ((sizeof (struct vring_desc ) * num +sizeof (__u16) * (2 + num) +#ifdef __KERNEL__ +/* Older versions did not have used_event field at the end of the +* avail ring. Used ring offset must be compatible with such devices. */ +size_t s =sizeof (struct vring_desc ) * num +sizeof (__u16) * (2 + num); +BUG_ON (ALIGN (s, align) !=ALIGN (s +sizeof (__u16), align)); +#endif +return ((sizeof (struct vring_desc ) * num +sizeof (__u16) * (3 + num) + align -1 ) & ~(align -1 )) +sizeof (__u16) *3 +sizeof (struct vring_used_elem ) * num; }
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 2/3 virtio_ring: check used_event offset
In reply to Michael S. TsirkinNothing's wrong with vring_size as is, but it's nice to check that the new field in the avail ring won't overlow into the used ring.
--- include/linux/virtio_ring.h | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
include/linux/virtio_ring.h +7 -1
@@ -119,7 +119,13 @@ static inline void vring_init(struct vring *vr, unsigned int num, void *p,static inline unsigned vring_size (unsigned int num,unsigned long align) { -return ((sizeof (struct vring_desc ) * num +sizeof (__u16) * (2 + num) +#ifdef __KERNEL__ +/* Older versions did not have used_event field at the end of the +* avail ring. Used ring offset must be compatible with such devices. */ +size_t s =sizeof (struct vring_desc ) * num +sizeof (__u16) * (2 + num); +BUG_ON (ALIGN (s, align) !=ALIGN (s +sizeof (__u16), align)); +#endif +return ((sizeof (struct vring_desc ) * num +sizeof (__u16) * (3 + num) + align -1 ) & ~(align -1 )) +sizeof (__u16) *3 +sizeof (struct vring_used_elem ) * num; }
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainerPATCH 3/3 virtio_ring: need_event api comment fix
In reply to Michael S. Tsirkinfix typo in a comment: size -> side
--- include/linux/virtio_ring.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/virtio_ring.h +1 -1
@@ -131,7 +131,7 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) }/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ -/* Assuming a given event_idx value from the other size, if +/* Assuming a given event_idx value from the other side, if * we have just incremented index from old to new_idx, * should we trigger an event? */ static inline int vring_need_event (__u16 event_idx,__u16 new_idx,__u16 old)
Signature · 1 line
1.7.5.53.gc233e
Re: [PATCH 3/3] virtio_ring: need_event api comment fix
Quoted 4 lines · Michael S. Tsirkin
fix typo in a comment: size -> side
Reported-by Stefan Hajnoczi <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>
I could smerge these together for you, but I *really* want benchmarks in these commit messages.
Thanks,
Rusty.
PS. Was away last week, hence the delay on this...
Re: [PATCH 3/3] virtio_ring: need_event api comment fix
In reply to Michael S. TsirkinQuoted 4 lines · Michael S. Tsirkin
fix typo in a comment: size -> side
Reported-by Stefan Hajnoczi <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>
I could smerge these together for you, but I *really* want benchmarks in these commit messages.
Thanks,
Rusty.
PS. Was away last week, hence the delay on this...
Michael S. Tsirkin
maintainerPATCH 3/3 virtio_ring: need_event api comment fix
In reply to Michael S. Tsirkinfix typo in a comment: size -> side
--- include/linux/virtio_ring.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/virtio_ring.h +1 -1
@@ -131,7 +131,7 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) }/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ -/* Assuming a given event_idx value from the other size, if +/* Assuming a given event_idx value from the other side, if * we have just incremented index from old to new_idx, * should we trigger an event? */ static inline int vring_need_event (__u16 event_idx,__u16 new_idx,__u16 old)
Signature · 1 line
1.7.5.53.gc233e
Michael S. Tsirkin
maintainercover virtio and vhost-net performance enhancements
In reply to Michael S. TsirkinHere are a couple of minor fixes suggested on list. Applies on top of the previous patchset.
As before result pushed here:git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git vhost-net-next-event-idx-v1
Michael S. Tsirkin (3):
virtio: fix avail event support
virtio_ring: check used_event offset
virtio_ring: need_event api comment fix
drivers/virtio/virtio_ring.c | 2 +- include/linux/virtio_ring.h | 10 ++++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
Signature · 1 line
1.7.5.53.gc233e
"Michael S. Tsirkin" <[email protected]> wrote on 05/05/2011 02:20:18 AM:
Quoted 7 lines
[PATCH 00/18] virtio and vhost-net performance enhancements
OK, here's a large patchset that implements the virtio spec update that I sent earlier. It supercedes the
PUBLISH_USED_IDXpatches
I sent out earlier.I know it's a lot to ask but please test, and please consider for
2.6.40 :)
Quoted 6 lines
I see nice performance improvements: one run showed going from 12 to 18 Gbit/s host to guest with netperf, but I did not spend a lot of time testing performance, so no guarantees it's not a fluke, I hope others will try this out and report.
Pls note I will be away from keyboard for the next week.
I tested with the git tree (which also contains the later additional patch), and get this error on guest:
May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure:
-28
...
The network stops after that and requires a modprobe "restart" to get it working again. This is with the new qemu/vhost/virtio-net.
Please let me know if I am missing something.
thanks,
- KK
"Michael S. Tsirkin" <[email protected]> wrote on 05/05/2011 02:20:18 AM:
Quoted 7 lines
[PATCH 00/18] virtio and vhost-net performance enhancements
OK, here's a large patchset that implements the virtio spec update that I sent earlier. It supercedes the
PUBLISH_USED_IDXpatches
I sent out earlier.I know it's a lot to ask but please test, and please consider for
2.6.40 :)
Quoted 6 lines
I see nice performance improvements: one run showed going from 12 to 18 Gbit/s host to guest with netperf, but I did not spend a lot of time testing performance, so no guarantees it's not a fluke, I hope others will try this out and report.
Pls note I will be away from keyboard for the next week.
I tested with the git tree (which also contains the later additional patch), and get this error on guest:
May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure: -28 May 11 08:06:08 localhost kernel: net eth0: Unexpected TX queue failure:
-28
...
The network stops after that and requires a modprobe "restart" to get it working again. This is with the new qemu/vhost/virtio-net.
Please let me know if I am missing something.
thanks,
- KK