Pull request #12

index 1eb25aa..0f158ca 100644
@@ -1,7 +1,9 @@
 DESCRIPTION = "FarSight is an audio/video conferencing framework specifically designed for Instant Messengers."
 HOMEPAGE = "http://farsight.sf.net"
 SRC_URI = "http://farsight.freedesktop.org/releases/farsight2/${P}.tar.gz"
-LICENSE = "unknown"
+
+LICENSE = "LGPLv2.1"
+LIC_FILES_CHKSUM = "file://COPYING;md5=fbc093901857fcd118f065f900982c24"
 
 DEPENDS = "libnice glib-2.0 libxml2 zlib dbus gstreamer gst-plugins-base"
 

index 81f9c98..3cac198 100644
@@ -2,7 +2,12 @@ DESCRIPTION = "Libnice is an implementation of the IETF's draft Interactice Conn
 HOMEPAGE = "http://nice.freedesktop.org/wiki/"
 SRC_URI = "http://nice.freedesktop.org/releases/libnice-${PV}.tar.gz"
 
-LICENSE = "LGPL/MPL"
+LICENSE = "LGPLv2.1 MPLv1.1"
+LIC_FILES_CHKSUM = "file://COPYING;md5=9c42325015702feda4f4d2f19a55b767 \
+                    file://COPYING.LGPL;md5=2d5025d4aa3495befef8f17206a5b0a1 \
+                    file://COPYING.MPL;md5=3c617710e51cdbe0fc00716f056dfb1a \
+"
+
 DEPENDS = "glib-2.0 gstreamer"
 
 inherit autotools

deleted file mode 100644
index 436fe07..0000000
@@ -1,15 +0,0 @@
-DESCRIPTION = "tangoGPS is a map and GPS application using Openstreetmap"
-AUTHOR = "Marcus Bauer <[email protected]>"
-HOMEPAGE = "http://tangogps.org/"
-SECTION = "x11/applications"
-LICENSE = "GPLv2"
-PRIORITY = "optional"
-DEPENDS = "curl gtk+ gconf sqlite3 libexif libsoup-2.4"
-
-SRC_URI = "http://www.tangogps.org/downloads/tangogps-${PV}.tar.gz;name=archive"
-S = "${WORKDIR}/tangogps-${PV}"
-
-inherit autotools pkgconfig
-
-RRECOMMENDS_${PN} = "gpsd"
-RRECOMMENDS_shr = "fso-gpsd"

index ab682f3..a5706d3 100644
@@ -1,4 +1,16 @@
-require tangogps.inc
+DESCRIPTION = "tangoGPS is a map and GPS application using Openstreetmap"
+AUTHOR = "Marcus Bauer <[email protected]>"
+HOMEPAGE = "http://tangogps.org/"
+SECTION = "x11/applications"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=59530bdf33659b29e73d4adb9f9f6552"
+PRIORITY = "optional"
+DEPENDS = "curl gtk+ gconf sqlite3 libexif libsoup-2.4"
 
-SRC_URI[archive.md5sum] = "0f07ede94a21eb84f5e017fa88a1fc3d"
-SRC_URI[archive.sha256sum] = "660fdf89ef3c379f2fc0c2a9d0c9d3bfa5345835786b72bf9f513ba9ec2c812a"
+SRC_URI = "http://www.tangogps.org/downloads/${P}.tar.gz"
+SRC_URI[md5sum] = "0f07ede94a21eb84f5e017fa88a1fc3d"
+SRC_URI[sha256sum] = "660fdf89ef3c379f2fc0c2a9d0c9d3bfa5345835786b72bf9f513ba9ec2c812a"
+
+inherit autotools pkgconfig
+
+RRECOMMENDS_${PN} = "gpsd"

index 96a2345..91d5176 100644
@@ -1,6 +1,7 @@
 DESCRIPTION = "multi-protocol instant messaging client"
 SECTION = "x11/network"
-LICENSE = "GPL"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
 DEPENDS = "python startup-notification avahi gtk+ ncurses gnutls virtual/libintl gstreamer dbus"
 INC_PR = "r0"
 

new file mode 100644
index 0000000..fdc023f
@@ -0,0 +1,15 @@
+DESCRIPTION = "Simple tool for input event debugging."
+HOMEPAGE = "http://people.freedesktop.org/~whot/evtest/"
+AUTHOR = "Vojtech Pavlik <[email protected]>"
+SECTION = "console/utils"
+PRIORITY = "optional"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
+
+DEPENDS = "libxml2"
+
+SRC_URI = "http://cgit.freedesktop.org/~whot/evtest/snapshot/evtest-${PV}.tar.bz2;name=archive"
+SRC_URI[archive.md5sum] = "770d6af03affe976bdbe3ad1a922c973"
+SRC_URI[archive.sha256sum] = "3d34123c68014dae6f7c19144ef79ea2915fa7a2f89ea35ca375a9cf9e191473"
+
+inherit autotools

new file mode 100644
index 0000000..c01db06
@@ -0,0 +1,47 @@
+# udev rules for gpsd
+# $Id$
+#
+# GPSes don't have their own USB device class.  They're serial-over-USB
+# devices, so what you see is actually the ID of the serial-over-USB chip.
+# Fortunately, just two of these account for over 80% of consumer-grade
+# GPS sensors.  The gpsd.hotplug.wrapper script will tell a running gpsd
+# that it should look at the device that just went active, because it
+# might be a GPS.
+#
+# The following setup works on Debian - something similar will apply on 
+# other distributions:
+# 
+#   /etc/udev/gpsd.rules
+#   /etc/udev/rules.d/025_gpsd.rules -> ../gpsd.rules
+#   /lib/udev/gpsd.hotplug.wrapper
+#   /lib/udev/gpsd.hotplug
+# 
+# Setting the link in /etc/udev/rules.d activates the rule and determines
+# when to run it on boot (similar to init.d processing).
+
+SUBSYSTEM!="tty", GOTO="gpsd_rules_end"
+
+# Prolific Technology, Inc. PL2303 Serial Port
+ATTR{idVendor}=="067b", ATTR{idProduct}=="2303", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# ATEN International Co., Ltd UC-232A Serial Port [pl2303]
+ATTR{idVendor}=="0557", ATTR{idProduct}=="2008", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# FTDI 8U232AM
+ATTR{idVendor}=="0403", ATTR{idProduct}=="6001", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# Cypress M8/CY7C64013 (DeLorme uses these)
+ATTR{idVendor}=="1163", ATTR{idProduct}=="0100", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# PS-360 OEM (Microsoft GPS sold with Street and Trips 2005)
+ATTR{idVendor}=="067b", ATTR{idProduct}=="aaa0", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# Garmin International GPSmap, various models (tested with Garmin GPS 18 USB)
+ATTR{idVendor}=="091e", ATTR{idProduct}=="0003", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# Cygnal Integrated Products, Inc. CP210x Composite Device (Used by Holux m241)
+ATTR{idVendor}=="10c4", ATTR{idProduct}=="ea60", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# u-blox AG, u-blox 5 (tested with Navilock NL-402U)
+ATTR{idVendor}=="1546", ATTR{idProduct}=="01a5", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# FTDI FT232
+ATTR{idVendor}=="0403", ATTR{idProduct}=="6001", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+# u-blox 4
+SYSFS{idVendor}=="1546", SYSFS{idProduct}=="01a4", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+
+ACTION=="remove", RUN+="/lib/udev/gpsd.hotplug.wrapper"
+
+LABEL="gpsd_rules_end"

136 lines not on this page · raw message

new file mode 100644
index 0000000..0ceff03
@@ -0,0 +1,5 @@
+# If you must specify a non-NMEA driver, uncomment and modify the next line
+GPSD_SOCKET="/var/run/gpsd.sock"
+GPSD_OPTIONS="" 
+GPS_DEVICES=""
+

new file mode 100644
index 0000000..7b78a72
@@ -0,0 +1,16 @@
+Index: gpsd-2.95/Makefile.am
+===================================================================
+--- gpsd-2.95.orig/Makefile.am	2010-08-26 15:31:38.804330723 +0200
++++ gpsd-2.95/Makefile.am	2010-08-26 15:31:57.170020341 +0200
+@@ -253,9 +253,9 @@
+ # Warning: This overrides autoconf's normal link-line generation process
+ if LIBGPSMM_ENABLE
+ libgps_la_SOURCES += libgpsmm.cpp
+-libgps_la_LINK = /bin/sh ./libtool --tag=CXX --mode=link g++ $(libgps_la_LDFLAGS) -o $@
++libgps_la_LINK = $(LIBTOOL) --tag=CXX --mode=link g++ $(libgps_la_LDFLAGS) -o $@
+ else
+-libgps_la_LINK = /bin/sh ./libtool --tag=CC --mode=link gcc $(libgps_la_LDFLAGS) -o $@
++libgps_la_LINK = $(LIBTOOL) --tag=CC --mode=link gcc $(libgps_la_LDFLAGS) -o $@
+ endif
+ 
+ nodist_libgpsd_la_SOURCES = packet_names.h ais_json.i

102 lines not on this page · raw message

new file mode 100644
index 0000000..8b685ac
@@ -0,0 +1,16 @@
+DESCRIPTION = "FoxtrotGPS is a map and GPS application using OpenStreetMap"
+AUTHOR = "Joshua Judson Rosen <[email protected]>"
+HOMEPAGE = "http://www.foxtrotgps.org/"
+SECTION = "x11/applications"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=59530bdf33659b29e73d4adb9f9f6552"
+PRIORITY = "optional"
+DEPENDS = "curl gtk+ gconf libglade sqlite3 libexif gpsd"
+
+SRC_URI = "http://www.foxtrotgps.org/releases/${P}.tar.gz"
+SRC_URI[md5sum] = "982d14cdb0439cc4d6aa6cefc232124d"
+SRC_URI[sha256sum] = "059158fd8e61137e2e6d6e01685add7fb85cce8483faa99efb01187f2ba50841"
+
+inherit autotools pkgconfig
+
+RRECOMMENDS_${PN} = "gpsd"

new file mode 100644
index 0000000..d3267ac
@@ -0,0 +1 @@
+BBCLASSEXTEND = "native"

new file mode 100644
index 0000000..7660ad9
@@ -0,0 +1,24 @@
+SECTION = "libs"
+LICENSE = "GD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=c97638cafd3581eb87abd37332137669"
+DESCRIPTION = "gd is a library used to create PNG, JPEG, or WBMP images."
+DEPENDS = "freetype libpng jpeg zlib"
+PR = "r4"
+
+SRC_URI = "http://www.libgd.org/releases/gd-2.0.36RC1.tar.gz"
+SRC_URI[md5sum] = "39ac48e6d5e0012a3bd2248a0102f209"
+SRC_URI[sha256sum] = "dd7c1795271221b9237769b96b8cec7fbdc5db7b8954d864ead51fc1296a6ac8"
+
+S = "${WORKDIR}/gd-2.0.36RC1"
+
+inherit autotools binconfig gettext
+
+EXTRA_OECONF += " --with-zlib=${STAGING_LIBDIR}/.. \
+                  --with-png=${STAGING_LIBDIR}/.. \
+                  --with-jpeg=${STAGING_LIBDIR}/.. \
+                  --with-freetype \
+                  --without-fontconfig \
+                  --without-xpm \
+                  --without-x"
+
+EXTRA_OEMAKE = 'LDFLAGS="${LDFLAGS}"'

new file mode 100644
index 0000000..317b6bc
@@ -0,0 +1,42 @@
+DESCRIPTION = "Library for rendering SVG files"
+SECTION = "x11/utils"
+DEPENDS = "bzip2 gtk+ libcroco cairo libart-lgpl libxml2 popt xineramaproto"
+DEPENDS_virtclass-native = "cairo-native pango-native gdk-pixbuf-native"
+LICENSE = "LGPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f \
+                    file://COPYING.LIB;md5=f30a9716ef3762e3467a2f62bf790f0a \
+"
+
+PR = "r1"
+
+inherit gnome
+
+SRC_URI[archive.md5sum] = "6bb1993f9180176e45d6084089f47aa8"
+SRC_URI[archive.sha256sum] = "e82fb920901e211a54cff5df88c327bedec8565b324e2f529f428f492361c60f"
+
+EXTRA_OECONF_virtclass-native = "--disable-mozilla-plugin"
+
+BBCLASSEXTEND = "native"
+
+PACKAGES =+ "librsvg-gtk librsvg-gtk-dbg librsvg-gtk-dev rsvg"
+
+FILES_${PN} = "${libdir}/*.so.*"
+FILES_rsvg = "${bindir}/rsvg \
+	      ${bindir}/rsvg-view \
+	      ${bindir}/rsvg-convert \
+	      ${datadir}/pixmaps/svg-viewer.svg"
+FILES_librsvg-gtk = "${libdir}/gtk-2.0/*/*/*.so"
+FILES_librsvg-gtk-dev += "${libdir}/gtk-2.0/*.la \
+			  ${libdir}/gtk-2.0/*/*.la \
+			  ${libdir}/gtk-2.0/*/*/*.la \
+			  "
+FILES_librsvg-gtk-dbg += "${libdir}/gtk-2.0/.debug \
+                          ${libdir}/gtk-2.0/*/*/.debug"
+
+pkg_postinst_librsvg-gtk() {
+if [ "x$D" != "x" ]; then
+        exit 1
+fi
+        gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
+}
+

new file mode 100644
index 0000000..f8ad0af
@@ -0,0 +1,11 @@
+--- /tmp/Makefile.PL.in	2008-10-01 10:39:38.000000000 +0200
++++ ImageMagick-6.4.4/PerlMagick/Makefile.PL.in	2008-10-01 10:40:25.000000000 +0200
+@@ -87,6 +87,8 @@
+ 
+    # Use same compiler as ImageMagick
+    'PERLMAINCC'	=> '@PERLMAINCC@ @OPENMP_CFLAGS@',
++   'AR' => '@AR@',
++   'LD' => '@PERLMAINCC@',
+ 
+    # Set Perl installation prefix to ImageMagick installation prefix
+ #   'PREFIX'	=> '@prefix@',

new file mode 100644
index 0000000..40f9736
@@ -0,0 +1,34 @@
+DESCRIPTION = "ImageMagick is an image convertion tools"
+SECTION = "console/utils"
+LICENSE = "ImageMagick"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=e1ebcc1358b9f81eba64255fc5da6892"
+# FIXME: There is much more checked libraries. All should be added or explicitly disabled to get consistent results.
+DEPENDS = "lcms bzip2 jpeg libpng librsvg tiff zlib"
+
+PR = "r7"
+
+PATCHSET = "1"
+SRC_URI = "ftp://ftp.nluug.nl/pub/ImageMagick/ImageMagick-${PV}-${PATCHSET}.tar.bz2 \
+           file://PerlMagic_MakePatch.patch \
+          "
+SRC_URI[md5sum] = "882ff241f6ad39655541d5055596f93b"
+SRC_URI[sha256sum] = "5a5b2779707bfd9816cf17d8f53d242c05005092da192a898ac10961b3b19dda"
+
+S = "${WORKDIR}/ImageMagick-${PV}"
+
+inherit autotools binconfig pkgconfig
+
+EXTRA_OECONF = "--program-prefix= --without-x --without-freetype --without-perl --disable-openmp"
+
+FILES_${PN} += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.so \
+                ${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.la \
+                ${libdir}/ImageMagick-${IMVER}/config/ \
+                ${datadir}/ImageMagick-${IMVER}"
+
+FILES_${PN}-dev += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/*.a"
+
+FILES_${PN}-dbg += "${libdir}/ImageMagick-${IMVER}/modules-Q16/*/.debug/*"
+
+BBCLASSEXTEND = "native"
+
+LEAD_SONAME = "libMagickCore.so.*"

new file mode 100644
index 0000000..a897a3d
@@ -0,0 +1,27 @@
+DESCRIPTION = "A portable audio library"
+SECTION = "libs/multimedia"
+PRIORITY = "optional"
+LICENSE = "PortAudio"
+LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=26107732c2ab637c5710446fcfaf02df"
+SRCREV = "1387"
+PV = "v19+svnr${SRCPV}"
+PR = "r0"
+
+SRC_URI = "svn://www.portaudio.com/repos/portaudio;module=trunk;proto=http"
+S = "${WORKDIR}/trunk"
+
+inherit autotools
+
+TESTS = "  pa_devs patest1      patest_hang patest_many                   patest_prime patest_sine patest_stop     patest_write_sine        \
+pa_fuzz    patest_buffer        patest_in_overflow  patest_maxsines       patest_read_record  patest_sine8         patest_sync              \
+pa_minlat  patest_callbackstop  patest_latency      patest_multi_sine     patest_record       patest_sine_formats  patest_toomanysines      \
+paqa_devs  patest_clip          patest_leftright    patest_out_underflow  patest_ringmix      patest_sine_time     patest_underflow         \
+paqa_errs  patest_dither        patest_longsine     patest_pink           patest_saw          patest_start_stop    patest_wire"
+
+# DEFINES = PA_USE_OSS=1 HAVE_LIBPTHREAD=1
+# DEFINES += PA_LITTLE_ENDIAN
+
+# INCLUDEPATH = ../pa_common
+
+PACKAGES += "portaudio-examples"
+FILES_portaudio-examples = "${bindir}"

new file mode 100644
index 0000000..a053e4c
@@ -0,0 +1,43 @@
+Index: alsa-oss-1.0.15/alsa/stdioemu.c
+===================================================================
+--- alsa-oss-1.0.15.orig/alsa/stdioemu.c	2007-10-15 10:50:40.000000000 +0200
++++ alsa-oss-1.0.15/alsa/stdioemu.c	2008-07-21 22:17:06.303161438 +0200
+@@ -37,7 +37,9 @@
+ #endif
+ 
+ #include <stdio.h>
++#ifdef HAVE_LIBIO_H
+ #include <libio.h>
++#endif
+ 
+ struct fd_cookie {
+ 	int fd;
+@@ -99,7 +101,11 @@
+ 
+ 	if (open_mode && fdc->fd > 0) {
+ 		result = fopencookie (fdc,"w", fns);
++#ifdef HAVE_FILENO
+ 		result->_fileno = fdc->fd;		/* ugly patchy slimy kludgy hack */
++#else
++		result->__filedes = fdc->fd;
++#endif
+ 	}
+ 	return result;
+ }
+Index: alsa-oss-1.0.15/configure.in
+===================================================================
+--- alsa-oss-1.0.15.orig/configure.in	2007-10-15 10:50:40.000000000 +0200
++++ alsa-oss-1.0.15/configure.in	2008-07-21 22:16:11.719837298 +0200
+@@ -33,6 +33,12 @@
+   LIBS="$OLD_LIBS"
+ fi
+ 
++AC_CHECK_HEADERS_ONCE([libio.h])
++
++AC_CHECK_MEMBER([struct _IO_FILE._fileno],
++		[AC_DEFINE([HAVE_FILENO], [1],[Define if _fileno exists.])],
++		[],[])
++
+ AC_OUTPUT(Makefile alsa/Makefile alsa/aoss alsa/aoss.old \
+ 	  oss-redir/Makefile test/Makefile \
+           alsa/testaoss test/testaoss)

new file mode 100644
index 0000000..52634c1
@@ -0,0 +1,22 @@
+DESCRIPTION = "Alsa OSS Compatibility Package"
+SECTION = "libs/multimedia"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=393a5ca445f6965873eca0259a17f833"
+DEPENDS = "alsa-lib"
+PR = "r1"
+
+SRC_URI = "ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-${PV}.tar.bz2 \
+	   file://libio.patch \
+	  "
+
+inherit autotools
+
+LEAD_SONAME = "libaoss.so.0"
+
+do_configure_prepend () {
+	touch NEWS README AUTHORS ChangeLog
+	sed -i "s/libaoss.so/${LEAD_SONAME}/" ${S}/alsa/aoss.in
+}
+
+SRC_URI[md5sum] = "1b1850c2fc91476a73d50f537cbd402f"
+SRC_URI[sha256sum] = "8d009e23e2cbee1691ec3c95d1838056a804d98440eae7715d6c3aebc710f9ca"

new file mode 100644
index 0000000..b3e4b7a
@@ -0,0 +1,6615 @@
+Index: lang/usenglish/Makefile
+===================================================================
+--- flite-1.3-release/lang/usenglish/Makefile	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/lang/usenglish/Makefile	(.../release-1.2)	(revision 7)
+@@ -38,6 +38,7 @@
+ DIRNAME=lang/usenglish
+ BUILD_DIRS = 
+ ALL_DIRS= 
++include $(TOP)/config/config
+ H = usenglish.h us_int_accent_cart.h us_int_tone_cart.h us_durz_cart.h \
+     us_ffeatures.h us_phrasing_cart.h us_text.h us_f0.h us_nums_cart.h
+ SRCS = us_int_accent_cart.c us_int_tone_cart.c us_f0_model.c \
+@@ -45,7 +46,11 @@
+        us_phoneset.c us_ffeatures.c us_phrasing_cart.c \
+        us_gpos.c us_text.c us_expand.c us_postlex.c \
+        us_nums_cart.c us_aswd.c usenglish.c 
+-OBJS = $(SRCS:.c=.o)
++ifdef SHFLAGS
++OBJS := $(SRCS:.c=.os)
++else
++OBJS := $(SRCS:.c=.o)
++endif
+ SCM=
+ FILES = Makefile $(SCM) $(SRCS) $(H)
+ LIBNAME = flite_usenglish
+Index: lang/cmu_us_kal/Makefile
+===================================================================
+--- flite-1.3-release/lang/cmu_us_kal/Makefile	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/lang/cmu_us_kal/Makefile	(.../release-1.2)	(revision 7)
+@@ -43,7 +43,12 @@
+        cmu_us_kal_lpc.c \
+        cmu_us_kal_res.c \
+        cmu_us_kal_residx.c
+-OBJS = $(SRCS:.c=.o)
++include $(TOP)/config/config
++ifdef SHFLAGS
++OBJS := $(SRCS:.c=.os)
++else
++OBJS := $(SRCS:.c=.o)
++endif
+ SCM=
+ FILES = Makefile $(SCM) $(SRCS) $(H)
+ LIBNAME = flite_cmu_us_kal
+Index: lang/cmu_us_kal16/Makefile
+===================================================================
+--- flite-1.3-release/lang/cmu_us_kal16/Makefile	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/lang/cmu_us_kal16/Makefile	(.../release-1.2)	(revision 7)
+@@ -44,7 +44,12 @@
+        cmu_us_kal16_lpc.c \
+        cmu_us_kal16_res.c \
+        cmu_us_kal16_residx.c
+-OBJS = $(SRCS:.c=.o)
++include $(TOP)/config/config
++ifdef SHFLAGS
++OBJS := $(SRCS:.c=.os)
++else
++OBJS := $(SRCS:.c=.o)
++endif
+ SCM=
+ FILES = Makefile $(SCM) $(SRCS) $(H)
+ LIBNAME = flite_cmu_us_kal16
+Index: lang/cmu_time_awb/Makefile
+===================================================================
+--- flite-1.3-release/lang/cmu_time_awb/Makefile	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/lang/cmu_time_awb/Makefile	(.../release-1.2)	(revision 7)
+@@ -45,7 +45,12 @@
+ 	cmu_time_awb_mcep.c \
+ 	cmu_time_awb_lpc.c \
+ 	cmu_time_awb_lex_entry.c
+-OBJS = $(SRCS:.c=.o)
++include $(TOP)/config/config
++ifdef SHFLAGS
++OBJS := $(SRCS:.c=.os)
++else
++OBJS := $(SRCS:.c=.o)
++endif
+ SCM=
+ FILES = Makefile $(SCM) $(SRCS) $(H)
+ LIBNAME = flite_cmu_time_awb
+Index: lang/cmulex/Makefile
+===================================================================
+--- flite-1.3-release/lang/cmulex/Makefile	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/lang/cmulex/Makefile	(.../release-1.2)	(revision 7)
+@@ -38,13 +38,20 @@
+ DIRNAME=lang/cmulex
+ BUILD_DIRS = 
+ ALL_DIRS= 
++
+ H = cmu_lts_model.h cmulex.h
+ SRCS = cmu_lts_rules.c cmu_lts_model.c \
+        cmu_lex.c cmu_lex_entries.c cmu_lex_data.c
+ LEX_DATA_INCLUDES = cmu_lex_data_raw.c cmu_lex_num_bytes.c \
+      cmu_lex_phones_huff_table.c cmu_lex_entries_huff_table.c
+ 
+-OBJS = $(SRCS:.c=.o)
++include $(TOP)/config/config
++ifdef SHFLAGS
++OBJS := $(SRCS:.c=.os)
++else
++OBJS := $(SRCS:.c=.o)
++endif
++
+ SCRIPTS=make_cmulex  
+ 
+ SCM=
+Index: configure
+===================================================================
+--- flite-1.3-release/configure	(.../flite-1.3-orig)	(revision 7)
++++ flite-1.3-release/configure	(.../release-1.2)	(revision 7)
+@@ -1,324 +1,38 @@
+ #! /bin/sh
++
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.57.
++# Generated automatically using autoconf version 2.13 
++# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+ #
+-# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+-# Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+-## --------------------- ##
+-## M4sh Initialization.  ##
+-## --------------------- ##
+ 
+-# Be Bourne compatible
+-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+-  emulate sh
+-  NULLCMD=:
+-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+-  # is contrary to our usage.  Disable this feature.
+-  alias -g '${1+"$@"}'='"$@"'
+-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+-  set -o posix
+-fi
+-
+-# Support unset when possible.
+-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+-  as_unset=unset
+-else
+-  as_unset=false
+-fi
+-
+-
+-# Work around bugs in pre-3.0 UWIN ksh.
+-$as_unset ENV MAIL MAILPATH
+-PS1='$ '
+-PS2='> '
+-PS4='+ '
+-
+-# NLS nuisances.
+-for as_var in \
+-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+-  LC_TELEPHONE LC_TIME
+-do
+-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+-    eval $as_var=C; export $as_var
+-  else
+-    $as_unset $as_var
+-  fi
+-done
+-
+-# Required to use basename.
+-if expr a : '\(a\)' >/dev/null 2>&1; then
+-  as_expr=expr
+-else
+-  as_expr=false
+-fi
+-
+-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+-  as_basename=basename
+-else
+-  as_basename=false
+-fi
+-
+-
+-# Name of the executable.
+-as_me=`$as_basename "$0" ||
+-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+-	 X"$0" : 'X\(//\)$' \| \
+-	 X"$0" : 'X\(/\)$' \| \
+-	 .     : '\(.\)' 2>/dev/null ||
+-echo X/"$0" |
+-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+-  	  /^X\/\(\/\).*/{ s//\1/; q; }
+-  	  s/.*/./; q'`
+-
+-
+-# PATH needs CR, and LINENO needs CR and PATH.
+-# Avoid depending upon Character Ranges.
+-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+-as_cr_digits='0123456789'
+-as_cr_alnum=$as_cr_Letters$as_cr_digits
+-
+-# The user is always right.
+-if test "${PATH_SEPARATOR+set}" != set; then
+-  echo "#! /bin/sh" >conf$$.sh
+-  echo  "exit 0"   >>conf$$.sh
+-  chmod +x conf$$.sh
+-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+-    PATH_SEPARATOR=';'
+-  else
+-    PATH_SEPARATOR=:
+-  fi
+-  rm -f conf$$.sh
+-fi
+-
+-
+-  as_lineno_1=$LINENO
+-  as_lineno_2=$LINENO
+-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+-  test "x$as_lineno_1" != "x$as_lineno_2" &&
+-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+-  # Find who we are.  Look in the path if we contain no path at all
+-  # relative or not.
+-  case $0 in
+-    *[\\/]* ) as_myself=$0 ;;
+-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+-done
+-
+-       ;;
+-  esac
+-  # We did not find ourselves, most probably we were run as `sh COMMAND'
+-  # in which case we are not to be found in the path.
+-  if test "x$as_myself" = x; then
+-    as_myself=$0
+-  fi
+-  if test ! -f "$as_myself"; then
+-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+-   { (exit 1); exit 1; }; }
+-  fi
+-  case $CONFIG_SHELL in
+-  '')
+-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for as_base in sh bash ksh sh5; do
+-	 case $as_dir in
+-	 /*)
+-	   if ("$as_dir/$as_base" -c '
+-  as_lineno_1=$LINENO
+-  as_lineno_2=$LINENO
+-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+-  test "x$as_lineno_1" != "x$as_lineno_2" &&
+-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+-	     CONFIG_SHELL=$as_dir/$as_base
+-	     export CONFIG_SHELL
+-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+-	   fi;;
+-	 esac
+-       done
+-done
+-;;
+-  esac
+-
+-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+-  # uniformly replaced by the line number.  The first 'sed' inserts a
+-  # line-number line before each line; the second 'sed' does the real
+-  # work.  The second script uses 'N' to pair each line-number line
+-  # with the numbered line, and appends trailing '-' during
+-  # substitution so that $LINENO is not a special case at line end.
+-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+-  sed '=' <$as_myself |
+-    sed '
+-      N
+-      s,$,-,
+-      : loop
+-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+-      t loop
+-      s,-$,,
+-      s,^['$as_cr_digits']*\n,,
+-    ' >$as_me.lineno &&
+-  chmod +x $as_me.lineno ||
+-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+-   { (exit 1); exit 1; }; }
+-
+-  # Don't try to exec as it changes $[0], causing all sort of problems
+-  # (the dirname of $[0] is not the place where we might find the
+-  # original and so on.  Autoconf is especially sensible to this).
+-  . ./$as_me.lineno
+-  # Exit status is that of the last command.
+-  exit
+-}
+-
+-
+-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+-  *c*,-n*) ECHO_N= ECHO_C='
+-' ECHO_T='	' ;;
+-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+-esac
+-
+-if expr a : '\(a\)' >/dev/null 2>&1; then
+-  as_expr=expr
+-else
+-  as_expr=false
+-fi
+-
+-rm -f conf$$ conf$$.exe conf$$.file
+-echo >conf$$.file
+-if ln -s conf$$.file conf$$ 2>/dev/null; then
+-  # We could just check for DJGPP; but this test a) works b) is more generic
+-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+-  if test -f conf$$.exe; then
+-    # Don't use ln at all; we don't have any links
+-    as_ln_s='cp -p'
+-  else
+-    as_ln_s='ln -s'
+-  fi
+-elif ln conf$$.file conf$$ 2>/dev/null; then
+-  as_ln_s=ln
+-else
+-  as_ln_s='cp -p'
+-fi
+-rm -f conf$$ conf$$.exe conf$$.file
+-
+-if mkdir -p . 2>/dev/null; then
+-  as_mkdir_p=:
+-else
+-  as_mkdir_p=false
+-fi
+-
+-as_executable_p="test -f"
+-
+-# Sed expression to map a string onto a valid CPP name.
+-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+-
+-# Sed expression to map a string onto a valid variable name.
+-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+-
+-
+-# IFS
+-# We need space, tab and new line, in precisely that order.
+-as_nl='
+-'
+-IFS=" 	$as_nl"
+-
+-# CDPATH.
+-$as_unset CDPATH
+-
+-
+-# Name of the host.
+-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+-# so uname gets run too.
+-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+-
+-exec 6>&1
+-
+-#
+-# Initializations.
+-#
++# Defaults:
++ac_help=
+ ac_default_prefix=/usr/local
+-ac_config_libobj_dir=.
+-cross_compiling=no
+-subdirs=
+-MFLAGS=
+-MAKEFLAGS=
+-SHELL=${CONFIG_SHELL-/bin/sh}
++# Any additions from configure.in:
++ac_help="$ac_help
++  --disable-shared     without shared library support"
++ac_help="$ac_help
++  --disable-sockets     without socket support"
++ac_help="$ac_help
++  --with-audio          with specific audio support (none linux freebsd etc) "
++ac_help="$ac_help
++  --with-lang           with language "
++ac_help="$ac_help
++  --with-vox            with vox "
++ac_help="$ac_help
++  --with-lex            with lexicon "
+ 
+-# Maximum number of lines to put in a shell here document.
+-# This variable seems obsolete.  It should probably be removed, and
+-# only ac_max_sed_lines should be used.
+-: ${ac_max_here_lines=38}
+-
+-# Identity of this package.
+-PACKAGE_NAME=
+-PACKAGE_TARNAME=
+-PACKAGE_VERSION=
+-PACKAGE_STRING=
+-PACKAGE_BUGREPORT=
+-
+-ac_unique_file="include/flite.h"
+-# Factoring default headers for most tests.
+-ac_includes_default="\
+-#include <stdio.h>
+-#if HAVE_SYS_TYPES_H
+-# include <sys/types.h>
+-#endif
+-#if HAVE_SYS_STAT_H
+-# include <sys/stat.h>
+-#endif
+-#if STDC_HEADERS
+-# include <stdlib.h>
+-# include <stddef.h>
+-#else
+-# if HAVE_STDLIB_H
+-#  include <stdlib.h>
+-# endif
+-#endif
+-#if HAVE_STRING_H
+-# if !STDC_HEADERS && HAVE_MEMORY_H
+-#  include <memory.h>
+-# endif
+-# include <string.h>
+-#endif
+-#if HAVE_STRINGS_H
+-# include <strings.h>
+-#endif
+-#if HAVE_INTTYPES_H
+-# include <inttypes.h>
+-#else
+-# if HAVE_STDINT_H
+-#  include <stdint.h>
+-# endif
+-#endif
+-#if HAVE_UNISTD_H
+-# include <unistd.h>
+-#endif"
+-
+-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT RANLIB ac_ct_RANLIB INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA AR ac_ct_AR TARGET_OS TARGET_CPU M68KCC LEXDEFS VOXDEFS HOST_OS HOST_CPU OTHERLIBS SHFLAGS MMAPTYPE STDIOTYPE CPP EGREP AUDIODRIVER AUDIODEFS AUDIOLIBS FL_LANG FL_VOX FL_LEX LIBOBJS LTLIBOBJS'
+-ac_subst_files=''
+-
+ # Initialize some variables set by options.
+-ac_init_help=
+-ac_init_version=false
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+-cache_file=/dev/null
++build=NONE
++cache_file=./config.cache
+ exec_prefix=NONE
++host=NONE
+ no_create=
++nonopt=NONE
+ no_recursion=
+ prefix=NONE
+ program_prefix=NONE
+@@ -327,15 +41,10 @@
+ silent=
+ site=
+ srcdir=
++target=NONE
+ verbose=
+ x_includes=NONE
+ x_libraries=NONE
+-
+-# Installation directory options.
+-# These are left unexpanded so users can "make install exec_prefix=/foo"
+-# and all the variables that are supposed to be based on exec_prefix
+-# by default will actually change.
+-# Use braces instead of parens because sh, perl, etc. also accept them.
+ bindir='${exec_prefix}/bin'
+ sbindir='${exec_prefix}/sbin'
+ libexecdir='${exec_prefix}/libexec'
+@@ -349,9 +58,17 @@
+ infodir='${prefix}/info'
+ mandir='${prefix}/man'
+ 
++# Initialize some other variables.
++subdirs=
++MFLAGS= MAKEFLAGS=
++SHELL=${CONFIG_SHELL-/bin/sh}
++# Maximum number of lines to put in a shell here document.
++ac_max_here_lines=12
++
+ ac_prev=
+ for ac_option
+ do
++
+   # If the previous option needs an argument, assign it.
+   if test -n "$ac_prev"; then
+     eval "$ac_prev=\$ac_option"
+@@ -359,59 +76,59 @@
+     continue
+   fi
+ 
+-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
++  case "$ac_option" in
++  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
++  *) ac_optarg= ;;
++  esac
+ 
+   # Accept the important Cygnus configure options, so we can diagnose typos.
+ 
+-  case $ac_option in
++  case "$ac_option" in
+ 
+   -bindir | --bindir | --bindi | --bind | --bin | --bi)
+     ac_prev=bindir ;;
+   -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+-    bindir=$ac_optarg ;;
++    bindir="$ac_optarg" ;;
+ 
+   -build | --build | --buil | --bui | --bu)
+-    ac_prev=build_alias ;;
++    ac_prev=build ;;
+   -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+-    build_alias=$ac_optarg ;;
++    build="$ac_optarg" ;;
+ 
+   -cache-file | --cache-file | --cache-fil | --cache-fi \
+   | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+     ac_prev=cache_file ;;
+   -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+   | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+-    cache_file=$ac_optarg ;;
++    cache_file="$ac_optarg" ;;
+ 
+-  --config-cache | -C)
+-    cache_file=config.cache ;;
+-
+   -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+     ac_prev=datadir ;;
+   -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+   | --da=*)
+-    datadir=$ac_optarg ;;
++    datadir="$ac_optarg" ;;
+ 
+   -disable-* | --disable-*)
+-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
++    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+     # Reject names that are not valid shell variable names.
+-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+-   { (exit 1); exit 1; }; }
+-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+-    eval "enable_$ac_feature=no" ;;
++    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
++      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
++    fi
++    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
++    eval "enable_${ac_feature}=no" ;;
+ 
+   -enable-* | --enable-*)
+-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
++    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+     # Reject names that are not valid shell variable names.
+-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+-   { (exit 1); exit 1; }; }
+-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+-    case $ac_option in
+-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
++    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
++      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
++    fi
++    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
++    case "$ac_option" in
++      *=*) ;;
+       *) ac_optarg=yes ;;
+     esac
+-    eval "enable_$ac_feature='$ac_optarg'" ;;
++    eval "enable_${ac_feature}='$ac_optarg'" ;;
+ 
+   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -420,47 +137,95 @@
+   -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+   | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+   | --exec=* | --exe=* | --ex=*)
+-    exec_prefix=$ac_optarg ;;
++    exec_prefix="$ac_optarg" ;;
+ 
+   -gas | --gas | --ga | --g)
+     # Obsolete; use --with-gas.
+     with_gas=yes ;;
+ 
+-  -help | --help | --hel | --he | -h)
+-    ac_init_help=long ;;
+-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+-    ac_init_help=recursive ;;
+-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+-    ac_init_help=short ;;
++  -help | --help | --hel | --he)
++    # Omit some internal or obsolete options to make the list less imposing.
++    # This message is too long to be a string in the A/UX 3.1 sh.
++    cat << EOF
++Usage: configure [options] [host]
++Options: [defaults in brackets after descriptions]
++Configuration:
++  --cache-file=FILE       cache test results in FILE
++  --help                  print this message
++  --no-create             do not create output files
++  --quiet, --silent       do not print \`checking...' messages
++  --version               print the version of autoconf that created configure
++Directory and file names:
++  --prefix=PREFIX         install architecture-independent files in PREFIX
++                          [$ac_default_prefix]
++  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
++                          [same as prefix]
++  --bindir=DIR            user executables in DIR [EPREFIX/bin]
++  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
++  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
++  --datadir=DIR           read-only architecture-independent data in DIR
++                          [PREFIX/share]
++  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
++  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
++                          [PREFIX/com]
++  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
++  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
++  --includedir=DIR        C header files in DIR [PREFIX/include]
++  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
++  --infodir=DIR           info documentation in DIR [PREFIX/info]
++  --mandir=DIR            man documentation in DIR [PREFIX/man]
++  --srcdir=DIR            find the sources in DIR [configure dir or ..]
++  --program-prefix=PREFIX prepend PREFIX to installed program names
++  --program-suffix=SUFFIX append SUFFIX to installed program names
++  --program-transform-name=PROGRAM
++                          run sed PROGRAM on installed program names
++EOF
++    cat << EOF
++Host type:
++  --build=BUILD           configure for building on BUILD [BUILD=HOST]
++  --host=HOST             configure for HOST [guessed]
++  --target=TARGET         configure for TARGET [TARGET=HOST]
++Features and packages:
++  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
++  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
++  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
++  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
++  --x-includes=DIR        X include files are in DIR
++  --x-libraries=DIR       X library files are in DIR
++EOF
++    if test -n "$ac_help"; then
++      echo "--enable and --with options recognized:$ac_help"
++    fi
++    exit 0 ;;
+ 
+   -host | --host | --hos | --ho)
+-    ac_prev=host_alias ;;
++    ac_prev=host ;;
+   -host=* | --host=* | --hos=* | --ho=*)
+-    host_alias=$ac_optarg ;;
++    host="$ac_optarg" ;;
+ 
+   -includedir | --includedir | --includedi | --included | --include \
+   | --includ | --inclu | --incl | --inc)
+     ac_prev=includedir ;;
+   -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+   | --includ=* | --inclu=* | --incl=* | --inc=*)
+-    includedir=$ac_optarg ;;
++    includedir="$ac_optarg" ;;
+ 
+   -infodir | --infodir | --infodi | --infod | --info | --inf)
+     ac_prev=infodir ;;
+   -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+-    infodir=$ac_optarg ;;
++    infodir="$ac_optarg" ;;
+ 
+   -libdir | --libdir | --libdi | --libd)
+     ac_prev=libdir ;;
+   -libdir=* | --libdir=* | --libdi=* | --libd=*)
+-    libdir=$ac_optarg ;;
++    libdir="$ac_optarg" ;;
+ 
+   -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+   | --libexe | --libex | --libe)
+     ac_prev=libexecdir ;;
+   -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+   | --libexe=* | --libex=* | --libe=*)
+-    libexecdir=$ac_optarg ;;
++    libexecdir="$ac_optarg" ;;
+ 
+   -localstatedir | --localstatedir | --localstatedi | --localstated \
+   | --localstate | --localstat | --localsta | --localst \
+@@ -469,19 +234,19 @@
+   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+   | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+   | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+-    localstatedir=$ac_optarg ;;
++    localstatedir="$ac_optarg" ;;
+ 
+   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+     ac_prev=mandir ;;
+   -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+-    mandir=$ac_optarg ;;
++    mandir="$ac_optarg" ;;
+ 
+   -nfp | --nfp | --nf)
+     # Obsolete; use --without-fp.
+     with_fp=no ;;
+ 
+   -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+-  | --no-cr | --no-c | -n)
++  | --no-cr | --no-c)
+     no_create=yes ;;
+ 
+   -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+@@ -495,26 +260,26 @@
+   -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+   | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+   | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+-    oldincludedir=$ac_optarg ;;
++    oldincludedir="$ac_optarg" ;;
+ 
+   -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+     ac_prev=prefix ;;
+   -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+-    prefix=$ac_optarg ;;
++    prefix="$ac_optarg" ;;
+ 
+   -program-prefix | --program-prefix | --program-prefi | --program-pref \
+   | --program-pre | --program-pr | --program-p)
+     ac_prev=program_prefix ;;
+   -program-prefix=* | --program-prefix=* | --program-prefi=* \
+   | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+-    program_prefix=$ac_optarg ;;
++    program_prefix="$ac_optarg" ;;
+ 
+   -program-suffix | --program-suffix | --program-suffi | --program-suff \
+   | --program-suf | --program-su | --program-s)
+     ac_prev=program_suffix ;;
+   -program-suffix=* | --program-suffix=* | --program-suffi=* \
+   | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+-    program_suffix=$ac_optarg ;;
++    program_suffix="$ac_optarg" ;;
+ 
+   -program-transform-name | --program-transform-name \
+   | --program-transform-nam | --program-transform-na \
+@@ -531,7 +296,7 @@
+   | --program-transfo=* | --program-transf=* \
+   | --program-trans=* | --program-tran=* \
+   | --progr-tra=* | --program-tr=* | --program-t=*)
+-    program_transform_name=$ac_optarg ;;
++    program_transform_name="$ac_optarg" ;;
+ 
+   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+   | -silent | --silent | --silen | --sile | --sil)
+@@ -541,7 +306,7 @@
+     ac_prev=sbindir ;;
+   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+   | --sbi=* | --sb=*)
+-    sbindir=$ac_optarg ;;
++    sbindir="$ac_optarg" ;;
+ 
+   -sharedstatedir | --sharedstatedir | --sharedstatedi \
+   | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+@@ -552,57 +317,58 @@
+   | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+   | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+   | --sha=* | --sh=*)
+-    sharedstatedir=$ac_optarg ;;
++    sharedstatedir="$ac_optarg" ;;
+ 
+   -site | --site | --sit)
+     ac_prev=site ;;
+   -site=* | --site=* | --sit=*)
+-    site=$ac_optarg ;;
++    site="$ac_optarg" ;;
+ 
+   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+     ac_prev=srcdir ;;
+   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+-    srcdir=$ac_optarg ;;
++    srcdir="$ac_optarg" ;;
+ 
+   -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+   | --syscon | --sysco | --sysc | --sys | --sy)
+     ac_prev=sysconfdir ;;
+   -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+   | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+-    sysconfdir=$ac_optarg ;;
++    sysconfdir="$ac_optarg" ;;
+ 
+   -target | --target | --targe | --targ | --tar | --ta | --t)
+-    ac_prev=target_alias ;;
++    ac_prev=target ;;
+   -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+-    target_alias=$ac_optarg ;;
++    target="$ac_optarg" ;;
+ 
+   -v | -verbose | --verbose | --verbos | --verbo | --verb)
+     verbose=yes ;;
+ 
+-  -version | --version | --versio | --versi | --vers | -V)
+-    ac_init_version=: ;;
++  -version | --version | --versio | --versi | --vers)
++    echo "configure generated by autoconf version 2.13"
++    exit 0 ;;
+ 
+   -with-* | --with-*)
+-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
++    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+     # Reject names that are not valid shell variable names.
+-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+-   { (exit 1); exit 1; }; }
++    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
++      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
++    fi
+     ac_package=`echo $ac_package| sed 's/-/_/g'`
+-    case $ac_option in
+-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
++    case "$ac_option" in
++      *=*) ;;
+       *) ac_optarg=yes ;;
+     esac
+-    eval "with_$ac_package='$ac_optarg'" ;;
++    eval "with_${ac_package}='$ac_optarg'" ;;
+ 
+   -without-* | --without-*)
+-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
++    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+     # Reject names that are not valid shell variable names.
+-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+-      { echo "$as_me: error: invalid package name: $ac_package" >&2
+-   { (exit 1); exit 1; }; }
+-    ac_package=`echo $ac_package | sed 's/-/_/g'`
+-    eval "with_$ac_package=no" ;;
++    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
++      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
++    fi
++    ac_package=`echo $ac_package| sed 's/-/_/g'`
++    eval "with_${ac_package}=no" ;;
+ 
+   --x)
+     # Obsolete; use --with-x.
+@@ -613,110 +379,99 @@
+     ac_prev=x_includes ;;
+   -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+   | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+-    x_includes=$ac_optarg ;;
++    x_includes="$ac_optarg" ;;
+ 
+   -x-libraries | --x-libraries | --x-librarie | --x-librari \
+   | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+     ac_prev=x_libraries ;;
+   -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+-    x_libraries=$ac_optarg ;;
++    x_libraries="$ac_optarg" ;;
+ 
+-  -*) { echo "$as_me: error: unrecognized option: $ac_option
+-Try \`$0 --help' for more information." >&2
+-   { (exit 1); exit 1; }; }
++  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+     ;;
+ 
+-  *=*)
+-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+-    # Reject names that are not valid shell variable names.
+-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+-   { (exit 1); exit 1; }; }
+-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+-    eval "$ac_envvar='$ac_optarg'"
+-    export $ac_envvar ;;
+-
+   *)
+-    # FIXME: should be removed in autoconf 3.0.
+-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
++    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
++      echo "configure: warning: $ac_option: invalid host type" 1>&2
++    fi
++    if test "x$nonopt" != xNONE; then
++      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
++    fi
++    nonopt="$ac_option"
+     ;;
+ 
+   esac
+ done
+ 
+ if test -n "$ac_prev"; then
+-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+-  { echo "$as_me: error: missing argument to $ac_option" >&2
+-   { (exit 1); exit 1; }; }
++  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+ fi
+ 
+-# Be sure to have absolute paths.
+-for ac_var in exec_prefix prefix
+-do
+-  eval ac_val=$`echo $ac_var`
+-  case $ac_val in
+-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+-   { (exit 1); exit 1; }; };;
+-  esac
+-done
++trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+ 
+-# Be sure to have absolute paths.
+-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+-              localstatedir libdir includedir oldincludedir infodir mandir
++# File descriptor usage:
++# 0 standard input
++# 1 file creation
++# 2 errors and warnings
++# 3 some systems may open it to /dev/tty
++# 4 used on the Kubota Titan
++# 6 checking for... messages and results
++# 5 compiler messages saved in config.log
++if test "$silent" = yes; then
++  exec 6>/dev/null
++else
++  exec 6>&1
++fi
++exec 5>./config.log
++
++echo "\
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++" 1>&5
++
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Also quote any args containing shell metacharacters.
++ac_configure_args=
++for ac_arg
+ do
+-  eval ac_val=$`echo $ac_var`
+-  case $ac_val in
+-    [\\/$]* | ?:[\\/]* ) ;;
+-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+-   { (exit 1); exit 1; }; };;
++  case "$ac_arg" in
++  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
++  | --no-cr | --no-c) ;;
++  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
++  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
++  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
++  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
++  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+   esac
+ done
+ 
+-# There might be people who depend on the old broken behavior: `$host'
+-# used to hold the argument of --host etc.
+-# FIXME: To remove some day.
+-build=$build_alias
+-host=$host_alias
+-target=$target_alias
++# NLS nuisances.
++# Only set these to C if already set.  These must not be set unconditionally
++# because not all systems understand e.g. LANG=C (notably SCO).
++# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
++# Non-C LC_CTYPE values break the ctype check.
++if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
++if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
++if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
++if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+ 
+-# FIXME: To remove some day.
+-if test "x$host_alias" != x; then
+-  if test "x$build_alias" = x; then
+-    cross_compiling=maybe
+-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+-    If a cross compiler is detected then cross compile mode will be used." >&2
+-  elif test "x$build_alias" != "x$host_alias"; then
+-    cross_compiling=yes
+-  fi
+-fi
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -rf conftest* confdefs.h
++# AIX cpp loses on an empty file, so make sure it contains at least a newline.
++echo > confdefs.h
+ 
+-ac_tool_prefix=
+-test -n "$host_alias" && ac_tool_prefix=$host_alias-
++# A filename unique to this package, relative to the directory that
++# configure is in, which we can look for to find out if srcdir is correct.
++ac_unique_file=include/flite.h
+ 
+-test "$silent" = yes && exec 6>/dev/null
+-
+-
+ # Find the source files, if location was not specified.
+ if test -z "$srcdir"; then
+   ac_srcdir_defaulted=yes
+   # Try the directory containing this script, then its parent.
+-  ac_confdir=`(dirname "$0") 2>/dev/null ||
+-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+-         X"$0" : 'X\(//\)[^/]' \| \
+-         X"$0" : 'X\(//\)$' \| \
+-         X"$0" : 'X\(/\)' \| \
+-         .     : '\(.\)' 2>/dev/null ||
+-echo X"$0" |
+-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+-  	  /^X\(\/\/\)$/{ s//\1/; q; }
+-  	  /^X\(\/\).*/{ s//\1/; q; }
+-  	  s/.*/./; q'`
++  ac_prog=$0
++  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
++  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+   srcdir=$ac_confdir
+   if test ! -r $srcdir/$ac_unique_file; then
+     srcdir=..
+@@ -726,441 +481,13 @@
+ fi
+ if test ! -r $srcdir/$ac_unique_file; then
+   if test "$ac_srcdir_defaulted" = yes; then
+-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+-   { (exit 1); exit 1; }; }
++    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+   else
+-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+-   { (exit 1); exit 1; }; }
++    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+   fi
+ fi
+-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+-   { (exit 1); exit 1; }; }
+-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+-ac_env_build_alias_set=${build_alias+set}
+-ac_env_build_alias_value=$build_alias
+-ac_cv_env_build_alias_set=${build_alias+set}
+-ac_cv_env_build_alias_value=$build_alias
+-ac_env_host_alias_set=${host_alias+set}
+-ac_env_host_alias_value=$host_alias
+-ac_cv_env_host_alias_set=${host_alias+set}
+-ac_cv_env_host_alias_value=$host_alias
+-ac_env_target_alias_set=${target_alias+set}
+-ac_env_target_alias_value=$target_alias
+-ac_cv_env_target_alias_set=${target_alias+set}
+-ac_cv_env_target_alias_value=$target_alias
+-ac_env_CC_set=${CC+set}
+-ac_env_CC_value=$CC
+-ac_cv_env_CC_set=${CC+set}
+-ac_cv_env_CC_value=$CC
+-ac_env_CFLAGS_set=${CFLAGS+set}
+-ac_env_CFLAGS_value=$CFLAGS
+-ac_cv_env_CFLAGS_set=${CFLAGS+set}
+-ac_cv_env_CFLAGS_value=$CFLAGS
+-ac_env_LDFLAGS_set=${LDFLAGS+set}
+-ac_env_LDFLAGS_value=$LDFLAGS
+-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+-ac_cv_env_LDFLAGS_value=$LDFLAGS
+-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+-ac_env_CPPFLAGS_value=$CPPFLAGS
+-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+-ac_env_CPP_set=${CPP+set}
+-ac_env_CPP_value=$CPP
+-ac_cv_env_CPP_set=${CPP+set}
+-ac_cv_env_CPP_value=$CPP
++srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+ 
+-#
+-# Report the --help message.
+-#
+-if test "$ac_init_help" = "long"; then
+-  # Omit some internal or obsolete options to make the list less imposing.
+-  # This message is too long to be a string in the A/UX 3.1 sh.
+-  cat <<_ACEOF
+-\`configure' configures this package to adapt to many kinds of systems.
+-
+-Usage: $0 [OPTION]... [VAR=VALUE]...
+-
+-To assign environment variables (e.g., CC, CFLAGS...), specify them as
+-VAR=VALUE.  See below for descriptions of some of the useful variables.
+-
+-Defaults for the options are specified in brackets.
+-
+-Configuration:
+-  -h, --help              display this help and exit
+-      --help=short        display options specific to this package
+-      --help=recursive    display the short help of all the included packages
+-  -V, --version           display version information and exit
+-  -q, --quiet, --silent   do not print \`checking...' messages
+-      --cache-file=FILE   cache test results in FILE [disabled]
+-  -C, --config-cache      alias for \`--cache-file=config.cache'
+-  -n, --no-create         do not create output files
+-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+-
+-_ACEOF
+-
+-  cat <<_ACEOF
+-Installation directories:
+-  --prefix=PREFIX         install architecture-independent files in PREFIX
+-                          [$ac_default_prefix]
+-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+-                          [PREFIX]
+-
+-By default, \`make install' will install all the files in
+-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+-for instance \`--prefix=\$HOME'.
+-
+-For better control, use the options below.
+-
+-Fine tuning of the installation directories:
+-  --bindir=DIR           user executables [EPREFIX/bin]
+-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+-  --libexecdir=DIR       program executables [EPREFIX/libexec]
+-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+-  --libdir=DIR           object code libraries [EPREFIX/lib]
+-  --includedir=DIR       C header files [PREFIX/include]
+-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+-  --infodir=DIR          info documentation [PREFIX/info]
+-  --mandir=DIR           man documentation [PREFIX/man]
+-_ACEOF
+-
+-  cat <<\_ACEOF
+-
+-System types:
+-  --build=BUILD     configure for building on BUILD [guessed]
+-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+-  --target=TARGET   configure for building compilers for TARGET [HOST]
+-_ACEOF
+-fi
+-
+-if test -n "$ac_init_help"; then
+-
+-  cat <<\_ACEOF
+-
+-Optional Features:
+-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+-  --disable-shared     without shared library support
+-  --disable-sockets     without socket support
+-
+-Optional Packages:
+-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+-  --with-audio          with specific audio support (none linux freebsd etc)
+-  --with-lang           with language
+-  --with-vox            with vox
+-  --with-lex            with lexicon
+-
+-Some influential environment variables:
+-  CC          C compiler command
+-  CFLAGS      C compiler flags
+-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+-              nonstandard directory <lib dir>
+-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+-              headers in a nonstandard directory <include dir>
+-  CPP         C preprocessor
+-
+-Use these variables to override the choices made by `configure' or to help
+-it to find libraries and programs with nonstandard names/locations.
+-
+-_ACEOF
+-fi
+-
+-if test "$ac_init_help" = "recursive"; then
+-  # If there are subdirs, report their specific --help.
+-  ac_popdir=`pwd`
+-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+-    test -d $ac_dir || continue
+-    ac_builddir=.
+-
+-if test "$ac_dir" != .; then
+-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+-  # A "../" for each directory in $ac_dir_suffix.
+-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+-else
+-  ac_dir_suffix= ac_top_builddir=
+-fi
+-
+-case $srcdir in
+-  .)  # No --srcdir option.  We are building in place.
+-    ac_srcdir=.
+-    if test -z "$ac_top_builddir"; then
+-       ac_top_srcdir=.
+-    else
+-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+-    fi ;;
+-  [\\/]* | ?:[\\/]* )  # Absolute path.
+-    ac_srcdir=$srcdir$ac_dir_suffix;
+-    ac_top_srcdir=$srcdir ;;
+-  *) # Relative path.
+-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+-esac
+-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+-# absolute.
+-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+-
+-    cd $ac_dir
+-    # Check for guested configure; otherwise get Cygnus style configure.
+-    if test -f $ac_srcdir/configure.gnu; then
+-      echo
+-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+-    elif test -f $ac_srcdir/configure; then
+-      echo
+-      $SHELL $ac_srcdir/configure  --help=recursive
+-    elif test -f $ac_srcdir/configure.ac ||
+-           test -f $ac_srcdir/configure.in; then
+-      echo
+-      $ac_configure --help
+-    else
+-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+-    fi
+-    cd $ac_popdir
+-  done
+-fi
+-
+-test -n "$ac_init_help" && exit 0
+-if $ac_init_version; then
+-  cat <<\_ACEOF
+-
+-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+-Free Software Foundation, Inc.
+-This configure script is free software; the Free Software Foundation
+-gives unlimited permission to copy, distribute and modify it.
+-_ACEOF
+-  exit 0
+-fi
+-exec 5>config.log
+-cat >&5 <<_ACEOF
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+-
+-It was created by $as_me, which was
+-generated by GNU Autoconf 2.57.  Invocation command line was
+-
+-  $ $0 $@
+-
+-_ACEOF
+-{
+-cat <<_ASUNAME
+-## --------- ##
+-## Platform. ##
+-## --------- ##
+-
+-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+-uname -m = `(uname -m) 2>/dev/null || echo unknown`
+-uname -r = `(uname -r) 2>/dev/null || echo unknown`
+-uname -s = `(uname -s) 2>/dev/null || echo unknown`
+-uname -v = `(uname -v) 2>/dev/null || echo unknown`
+-
+-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+-
+-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+-
+-_ASUNAME
+-
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  echo "PATH: $as_dir"
+-done
+-
+-} >&5
+-
+-cat >&5 <<_ACEOF
+-
+-
+-## ----------- ##
+-## Core tests. ##
+-## ----------- ##
+-
+-_ACEOF
+-
+-
+-# Keep a trace of the command line.
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Strip out --silent because we don't want to record it for future runs.
+-# Also quote any args containing shell meta-characters.
+-# Make two passes to allow for proper duplicate-argument suppression.
+-ac_configure_args=
+-ac_configure_args0=
+-ac_configure_args1=
+-ac_sep=
+-ac_must_keep_next=false
+-for ac_pass in 1 2
+-do
+-  for ac_arg
+-  do
+-    case $ac_arg in
+-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+-    | -silent | --silent | --silen | --sile | --sil)
+-      continue ;;
+-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+-    esac
+-    case $ac_pass in
+-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+-    2)
+-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+-      if test $ac_must_keep_next = true; then
+-        ac_must_keep_next=false # Got value, back to normal.
+-      else
+-        case $ac_arg in
+-          *=* | --config-cache | -C | -disable-* | --disable-* \
+-          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+-          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+-          | -with-* | --with-* | -without-* | --without-* | --x)
+-            case "$ac_configure_args0 " in
+-              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+-            esac
+-            ;;
+-          -* ) ac_must_keep_next=true ;;
+-        esac
+-      fi
+-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+-      # Get rid of the leading space.
+-      ac_sep=" "
+-      ;;
+-    esac
+-  done
+-done
+-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+-
+-# When interrupted or exit'd, cleanup temporary files, and complete
+-# config.log.  We remove comments because anyway the quotes in there
+-# would cause problems or look ugly.
+-# WARNING: Be sure not to use single quotes in there, as some shells,
+-# such as our DU 5.0 friend, will then `close' the trap.
+-trap 'exit_status=$?
+-  # Save into config.log some information that might help in debugging.
+-  {
+-    echo
+-
+-    cat <<\_ASBOX
+-## ---------------- ##
+-## Cache variables. ##
+-## ---------------- ##
+-_ASBOX
+-    echo
+-    # The following way of writing the cache mishandles newlines in values,
+-{
+-  (set) 2>&1 |
+-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+-    *ac_space=\ *)
+-      sed -n \
+-        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+-    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+-      ;;
+-    *)
+-      sed -n \
+-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+-      ;;
+-    esac;
+-}
+-    echo
+-
+-    cat <<\_ASBOX
+-## ----------------- ##
+-## Output variables. ##
+-## ----------------- ##
+-_ASBOX
+-    echo
+-    for ac_var in $ac_subst_vars
+-    do
+-      eval ac_val=$`echo $ac_var`
+-      echo "$ac_var='"'"'$ac_val'"'"'"
+-    done | sort
+-    echo
+-
+-    if test -n "$ac_subst_files"; then
+-      cat <<\_ASBOX
+-## ------------- ##
+-## Output files. ##
+-## ------------- ##
+-_ASBOX
+-      echo
+-      for ac_var in $ac_subst_files
+-      do
+-	eval ac_val=$`echo $ac_var`
+-        echo "$ac_var='"'"'$ac_val'"'"'"
+-      done | sort
+-      echo
+-    fi
+-
+-    if test -s confdefs.h; then
+-      cat <<\_ASBOX
+-## ----------- ##
+-## confdefs.h. ##
+-## ----------- ##
+-_ASBOX
+-      echo
+-      sed "/^$/d" confdefs.h | sort
+-      echo
+-    fi
+-    test "$ac_signal" != 0 &&
+-      echo "$as_me: caught signal $ac_signal"
+-    echo "$as_me: exit $exit_status"
+-  } >&5
+-  rm -f core core.* *.core &&
+-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+-    exit $exit_status
+-     ' 0
+-for ac_signal in 1 2 13 15; do
+-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+-done
+-ac_signal=0
+-
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -rf conftest* confdefs.h
+-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+-echo >confdefs.h
+-
+-# Predefined preprocessor variables.
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_NAME "$PACKAGE_NAME"
+-_ACEOF
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+-_ACEOF
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_VERSION "$PACKAGE_VERSION"
+-_ACEOF
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_STRING "$PACKAGE_STRING"
+-_ACEOF
+-
+-
+-cat >>confdefs.h <<_ACEOF
+-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+-_ACEOF
+-
+-
+-# Let the site file select an alternate cache file if it wants to.
+ # Prefer explicitly selected file to automatically selected ones.
+ if test -z "$CONFIG_SITE"; then
+   if test "x$prefix" != xNONE; then
+@@ -1171,106 +498,42 @@
+ fi
+ for ac_site_file in $CONFIG_SITE; do
+   if test -r "$ac_site_file"; then
+-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+-echo "$as_me: loading site script $ac_site_file" >&6;}
+-    sed 's/^/| /' "$ac_site_file" >&5
++    echo "loading site script $ac_site_file"
+     . "$ac_site_file"
+   fi
+ done
+ 
+ if test -r "$cache_file"; then
+-  # Some versions of bash will fail to source /dev/null (special
+-  # files actually), so we avoid doing that.
+-  if test -f "$cache_file"; then
+-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+-echo "$as_me: loading cache $cache_file" >&6;}
+-    case $cache_file in
+-      [\\/]* | ?:[\\/]* ) . $cache_file;;
+-      *)                      . ./$cache_file;;
+-    esac
+-  fi
++  echo "loading cache $cache_file"
++  . $cache_file
+ else
+-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+-echo "$as_me: creating cache $cache_file" >&6;}
+-  >$cache_file
++  echo "creating cache $cache_file"
++  > $cache_file
+ fi
+ 
+-# Check that the precious variables saved in the cache have kept the same
+-# value.
+-ac_cache_corrupted=false
+-for ac_var in `(set) 2>&1 |
+-               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+-  eval ac_new_set=\$ac_env_${ac_var}_set
+-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+-  eval ac_new_val="\$ac_env_${ac_var}_value"
+-  case $ac_old_set,$ac_new_set in
+-    set,)
+-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+-      ac_cache_corrupted=: ;;
+-    ,set)
+-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+-      ac_cache_corrupted=: ;;
+-    ,);;
+-    *)
+-      if test "x$ac_old_val" != "x$ac_new_val"; then
+-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+-echo "$as_me:   former value:  $ac_old_val" >&2;}
+-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+-echo "$as_me:   current value: $ac_new_val" >&2;}
+-        ac_cache_corrupted=:
+-      fi;;
+-  esac
+-  # Pass precious variables to config.status.
+-  if test "$ac_new_set" = set; then
+-    case $ac_new_val in
+-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+-    *) ac_arg=$ac_var=$ac_new_val ;;
+-    esac
+-    case " $ac_configure_args " in
+-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+-    esac
+-  fi
+-done
+-if $ac_cache_corrupted; then
+-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+-   { (exit 1); exit 1; }; }
+-fi
+-
+ ac_ext=c
++# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
++ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
++ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
++cross_compiling=$ac_cv_prog_cc_cross
+ 
++ac_exeext=
++ac_objext=o
++if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
++  # Stardent Vistra SVR4 grep lacks -e, says [email protected].
++  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
++    ac_n= ac_c='
++' ac_t='	'
++  else
++    ac_n=-n ac_c= ac_t=
++  fi
++else
++  ac_n= ac_c='\c' ac_t=
++fi
+ 
+ 
+ 
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+   if test -f $ac_dir/install-sh; then
+@@ -1281,740 +544,312 @@
+     ac_aux_dir=$ac_dir
+     ac_install_sh="$ac_aux_dir/install.sh -c"
+     break
+-  elif test -f $ac_dir/shtool; then
+-    ac_aux_dir=$ac_dir
+-    ac_install_sh="$ac_aux_dir/shtool install -c"
+-    break
+   fi
+ done
+ if test -z "$ac_aux_dir"; then
+-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+-   { (exit 1); exit 1; }; }
++  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+ fi
+-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
++ac_config_guess=$ac_aux_dir/config.guess
++ac_config_sub=$ac_aux_dir/config.sub
++ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+ 
+-# Make sure we can run config.sub.
+-$ac_config_sub sun4 >/dev/null 2>&1 ||
+-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+-   { (exit 1); exit 1; }; }
+ 
+-echo "$as_me:$LINENO: checking build system type" >&5
+-echo $ECHO_N "checking build system type... $ECHO_C" >&6
+-if test "${ac_cv_build+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  ac_cv_build_alias=$build_alias
+-test -z "$ac_cv_build_alias" &&
+-  ac_cv_build_alias=`$ac_config_guess`
+-test -z "$ac_cv_build_alias" &&
+-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+-   { (exit 1); exit 1; }; }
+-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+-   { (exit 1); exit 1; }; }
++# Do some error checking and defaulting for the host and target type.
++# The inputs are:
++#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
++#
++# The rules are:
++# 1. You are not allowed to specify --host, --target, and nonopt at the
++#    same time.
++# 2. Host defaults to nonopt.
++# 3. If nonopt is not specified, then host defaults to the current host,
++#    as determined by config.guess.
++# 4. Target and build default to nonopt.
++# 5. If nonopt is not specified, then target and build default to host.
+ 
++# The aliases save the names the user supplied, while $host etc.
++# will get canonicalized.
++case $host---$target---$nonopt in
++NONE---*---* | *---NONE---* | *---*---NONE) ;;
++*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
++esac
++
++
++# Make sure we can run config.sub.
++if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
++else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+ fi
+-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+-echo "${ECHO_T}$ac_cv_build" >&6
+-build=$ac_cv_build
+-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ 
++echo $ac_n "checking host system type""... $ac_c" 1>&6
++echo "configure:585: checking host system type" >&5
+ 
+-echo "$as_me:$LINENO: checking host system type" >&5
+-echo $ECHO_N "checking host system type... $ECHO_C" >&6
+-if test "${ac_cv_host+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  ac_cv_host_alias=$host_alias
+-test -z "$ac_cv_host_alias" &&
+-  ac_cv_host_alias=$ac_cv_build_alias
+-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+-   { (exit 1); exit 1; }; }
++host_alias=$host
++case "$host_alias" in
++NONE)
++  case $nonopt in
++  NONE)
++    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
++    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
++    fi ;;
++  *) host_alias=$nonopt ;;
++  esac ;;
++esac
+ 
+-fi
+-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+-echo "${ECHO_T}$ac_cv_host" >&6
+-host=$ac_cv_host
+-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
++host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++echo "$ac_t""$host" 1>&6
+ 
++echo $ac_n "checking target system type""... $ac_c" 1>&6
++echo "configure:606: checking target system type" >&5
+ 
+-echo "$as_me:$LINENO: checking target system type" >&5
+-echo $ECHO_N "checking target system type... $ECHO_C" >&6
+-if test "${ac_cv_target+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  ac_cv_target_alias=$target_alias
+-test "x$ac_cv_target_alias" = "x" &&
+-  ac_cv_target_alias=$ac_cv_host_alias
+-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+-   { (exit 1); exit 1; }; }
++target_alias=$target
++case "$target_alias" in
++NONE)
++  case $nonopt in
++  NONE) target_alias=$host_alias ;;
++  *) target_alias=$nonopt ;;
++  esac ;;
++esac
+ 
+-fi
+-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+-echo "${ECHO_T}$ac_cv_target" >&6
+-target=$ac_cv_target
+-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
++target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++echo "$ac_t""$target" 1>&6
+ 
++echo $ac_n "checking build system type""... $ac_c" 1>&6
++echo "configure:624: checking build system type" >&5
+ 
+-# The aliases save the names the user supplied, while $host etc.
+-# will get canonicalized.
+-test -n "$target_alias" &&
++build_alias=$build
++case "$build_alias" in
++NONE)
++  case $nonopt in
++  NONE) build_alias=$host_alias ;;
++  *) build_alias=$nonopt ;;
++  esac ;;
++esac
++
++build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
++build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++echo "$ac_t""$build" 1>&6
++
++test "$host_alias" != "$target_alias" &&
+   test "$program_prefix$program_suffix$program_transform_name" = \
+     NONENONEs,x,x, &&
+   program_prefix=${target_alias}-
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}gcc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$CC"; then
+-  ac_cv_prog_CC="$CC" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+ 
+-fi
+-fi
+-CC=$ac_cv_prog_CC
+-if test -n "$CC"; then
+-  echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-fi
+-if test -z "$ac_cv_prog_CC"; then
+-  ac_ct_CC=$CC
+-  # Extract the first word of "gcc", so it can be a program name with args.
++# Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
++echo "configure:649: checking for $ac_word" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+-  if test -n "$ac_ct_CC"; then
+-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_ac_ct_CC="gcc"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
+-fi
+-fi
+-ac_ct_CC=$ac_cv_prog_ac_ct_CC
+-if test -n "$ac_ct_CC"; then
+-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-echo "${ECHO_T}$ac_ct_CC" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-  CC=$ac_ct_CC
+-else
+-  CC="$ac_cv_prog_CC"
+-fi
+-
+-if test -z "$CC"; then
+-  if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}cc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+   if test -n "$CC"; then
+   ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_CC="${ac_tool_prefix}cc"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
++  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
++  ac_dummy="$PATH"
++  for ac_dir in $ac_dummy; do
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$ac_word; then
++      ac_cv_prog_CC="gcc"
++      break
++    fi
++  done
++  IFS="$ac_save_ifs"
+ fi
+ fi
+-CC=$ac_cv_prog_CC
++CC="$ac_cv_prog_CC"
+ if test -n "$CC"; then
+-  echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6
++  echo "$ac_t""$CC" 1>&6
+ else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
++  echo "$ac_t""no" 1>&6
+ fi
+ 
+-fi
+-if test -z "$ac_cv_prog_CC"; then
+-  ac_ct_CC=$CC
+-  # Extract the first word of "cc", so it can be a program name with args.
+-set dummy cc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$ac_ct_CC"; then
+-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_ac_ct_CC="cc"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
+-fi
+-fi
+-ac_ct_CC=$ac_cv_prog_ac_ct_CC
+-if test -n "$ac_ct_CC"; then
+-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-echo "${ECHO_T}$ac_ct_CC" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-  CC=$ac_ct_CC
+-else
+-  CC="$ac_cv_prog_CC"
+-fi
+-
+-fi
+ if test -z "$CC"; then
+   # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
++echo "configure:679: checking for $ac_word" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   if test -n "$CC"; then
+   ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
++  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+   ac_prog_rejected=no
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+-       ac_prog_rejected=yes
+-       continue
+-     fi
+-    ac_cv_prog_CC="cc"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
++  ac_dummy="$PATH"
++  for ac_dir in $ac_dummy; do
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$ac_word; then
++      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
++        ac_prog_rejected=yes
++	continue
++      fi
++      ac_cv_prog_CC="cc"
++      break
++    fi
++  done
++  IFS="$ac_save_ifs"
+ if test $ac_prog_rejected = yes; then
+   # We found a bogon in the path, so make sure we never use it.
+   set dummy $ac_cv_prog_CC
+   shift
+-  if test $# != 0; then
++  if test $# -gt 0; then
+     # We chose a different compiler from the bogus one.
+     # However, it has the same basename, so the bogon will be chosen
+     # first if we set CC to just the basename; use the full file name.
+     shift
+-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
++    set dummy "$ac_dir/$ac_word" "$@"
++    shift
++    ac_cv_prog_CC="$@"
+   fi
+ fi
+ fi
+ fi
+-CC=$ac_cv_prog_CC
++CC="$ac_cv_prog_CC"
+ if test -n "$CC"; then
+-  echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6
++  echo "$ac_t""$CC" 1>&6
+ else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
++  echo "$ac_t""no" 1>&6
+ fi
+ 
+-fi
+-if test -z "$CC"; then
+-  if test -n "$ac_tool_prefix"; then
+-  for ac_prog in cl
+-  do
+-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++  if test -z "$CC"; then
++    case "`uname -s`" in
++    *win32* | *WIN32*)
++      # Extract the first word of "cl", so it can be a program name with args.
++set dummy cl; ac_word=$2
++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
++echo "configure:730: checking for $ac_word" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   if test -n "$CC"; then
+   ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
++  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
++  ac_dummy="$PATH"
++  for ac_dir in $ac_dummy; do
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$ac_word; then
++      ac_cv_prog_CC="cl"
++      break
++    fi
++  done
++  IFS="$ac_save_ifs"
+ fi
+ fi
+-CC=$ac_cv_prog_CC
++CC="$ac_cv_prog_CC"
+ if test -n "$CC"; then
+-  echo "$as_me:$LINENO: result: $CC" >&5
+-echo "${ECHO_T}$CC" >&6
++  echo "$ac_t""$CC" 1>&6
+ else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
++  echo "$ac_t""no" 1>&6
+ fi
+-
+-    test -n "$CC" && break
+-  done
+-fi
+-if test -z "$CC"; then
+-  ac_ct_CC=$CC
+-  for ac_prog in cl
+-do
+-  # Extract the first word of "$ac_prog", so it can be a program name with args.
+-set dummy $ac_prog; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$ac_ct_CC"; then
+-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_ac_ct_CC="$ac_prog"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
++ ;;
++    esac
+   fi
+-done
+-done
+-
++  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+ fi
+-fi
+-ac_ct_CC=$ac_cv_prog_ac_ct_CC
+-if test -n "$ac_ct_CC"; then
+-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+-echo "${ECHO_T}$ac_ct_CC" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+ 
+-  test -n "$ac_ct_CC" && break
+-done
++echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
++echo "configure:762: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+ 
+-  CC=$ac_ct_CC
+-fi
++ac_ext=c
++# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
++ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
++cross_compiling=$ac_cv_prog_cc_cross
+ 
+-fi
++cat > conftest.$ac_ext << EOF
+ 
++#line 773 "configure"
++#include "confdefs.h"
+ 
+-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: no acceptable C compiler found in \$PATH
+-See \`config.log' for more details." >&2;}
+-   { (exit 1); exit 1; }; }
+-
+-# Provide some information about the compiler.
+-echo "$as_me:$LINENO:" \
+-     "checking for C compiler version" >&5
+-ac_compiler=`set X $ac_compile; echo $2`
+-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }
+-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }
+-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }
+-
+-cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-
+-int
+-main ()
+-{
+-
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-ac_clean_files_save=$ac_clean_files
+-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+-# Try to create an executable without -o first, disregard a.out.
+-# It will help us diagnose broken compilers, and finding out an intuition
+-# of exeext.
+-echo "$as_me:$LINENO: checking for C compiler default output" >&5
+-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+-  (eval $ac_link_default) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; then
+-  # Find the output, starting from the most likely.  This scheme is
+-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+-# resort.
+-
+-# Be careful to initialize this variable, since it used to be cached.
+-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+-ac_cv_exeext=
+-# b.out is created by i960 compilers.
+-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+-do
+-  test -f "$ac_file" || continue
+-  case $ac_file in
+-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+-        ;;
+-    conftest.$ac_ext )
+-        # This is the source file.
+-        ;;
+-    [ab].out )
+-        # We found the default executable, but exeext='' is most
+-        # certainly right.
+-        break;;
+-    *.* )
+-        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+-        # FIXME: I believe we export ac_cv_exeext for Libtool,
+-        # but it would be cool to find out if it's true.  Does anybody
+-        # maintain Libtool? --akim.
+-        export ac_cv_exeext
+-        break;;
+-    * )
+-        break;;
+-  esac
+-done
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: C compiler cannot create executables
+-See \`config.log' for more details." >&2;}
+-   { (exit 77); exit 77; }; }
+-fi
+-
+-ac_exeext=$ac_cv_exeext
+-echo "$as_me:$LINENO: result: $ac_file" >&5
+-echo "${ECHO_T}$ac_file" >&6
+-
+-# Check the compiler produces executables we can run.  If not, either
+-# the compiler is broken, or we cross compile.
+-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+-# If not cross compiling, check that we can run a simple program.
+-if test "$cross_compiling" != yes; then
+-  if { ac_try='./$ac_file'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-    cross_compiling=no
++main(){return(0);}
++EOF
++if { (eval echo configure:778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
++  ac_cv_prog_cc_works=yes
++  # If we can't run a trivial program, we are probably using a cross compiler.
++  if (./conftest; exit) 2>/dev/null; then
++    ac_cv_prog_cc_cross=no
+   else
+-    if test "$cross_compiling" = maybe; then
+-	cross_compiling=yes
+-    else
+-	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'.
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'.
+-See \`config.log' for more details." >&2;}
+-   { (exit 1); exit 1; }; }
+-    fi
++    ac_cv_prog_cc_cross=yes
+   fi
++else
++  echo "configure: failed program was:" >&5
++  cat conftest.$ac_ext >&5
++  ac_cv_prog_cc_works=no
+ fi
+-echo "$as_me:$LINENO: result: yes" >&5
+-echo "${ECHO_T}yes" >&6
++rm -fr conftest*
++ac_ext=c
++# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
++ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
++cross_compiling=$ac_cv_prog_cc_cross
+ 
+-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+-ac_clean_files=$ac_clean_files_save
+-# Check the compiler produces executables we can run.  If not, either
+-# the compiler is broken, or we cross compile.
+-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+-echo "$as_me:$LINENO: result: $cross_compiling" >&5
+-echo "${ECHO_T}$cross_compiling" >&6
+-
+-echo "$as_me:$LINENO: checking for suffix of executables" >&5
+-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+-  (eval $ac_link) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; then
+-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+-# work properly (i.e., refer to `conftest.exe'), while it won't with
+-# `rm'.
+-for ac_file in conftest.exe conftest conftest.*; do
+-  test -f "$ac_file" || continue
+-  case $ac_file in
+-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+-          export ac_cv_exeext
+-          break;;
+-    * ) break;;
+-  esac
+-done
+-else
+-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+-See \`config.log' for more details." >&2;}
+-   { (exit 1); exit 1; }; }
++echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
++if test $ac_cv_prog_cc_works = no; then
++  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+ fi
++echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
++echo "configure:804: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
++echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
++cross_compiling=$ac_cv_prog_cc_cross
+ 
+-rm -f conftest$ac_cv_exeext
+-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+-echo "${ECHO_T}$ac_cv_exeext" >&6
+-
+-rm -f conftest.$ac_ext
+-EXEEXT=$ac_cv_exeext
+-ac_exeext=$EXEEXT
+-echo "$as_me:$LINENO: checking for suffix of object files" >&5
+-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+-if test "${ac_cv_objext+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
++echo "configure:809: checking whether we are using GNU C" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+-  cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-
+-int
+-main ()
+-{
+-
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.o conftest.obj
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; then
+-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+-  case $ac_file in
+-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+-       break;;
+-  esac
+-done
++  cat > conftest.c <<EOF
++#ifdef __GNUC__
++  yes;
++#endif
++EOF
++if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
++  ac_cv_prog_gcc=yes
+ else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: cannot compute suffix of object files: cannot compile
+-See \`config.log' for more details." >&2;}
+-   { (exit 1); exit 1; }; }
++  ac_cv_prog_gcc=no
+ fi
+-
+-rm -f conftest.$ac_cv_objext conftest.$ac_ext
+ fi
+-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+-echo "${ECHO_T}$ac_cv_objext" >&6
+-OBJEXT=$ac_cv_objext
+-ac_objext=$OBJEXT
+-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+ 
+-int
+-main ()
+-{
+-#ifndef __GNUC__
+-       choke me
+-#endif
++echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+ 
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  ac_compiler_gnu=yes
++if test $ac_cv_prog_gcc = yes; then
++  GCC=yes
+ else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-ac_compiler_gnu=no
++  GCC=
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
+-ac_cv_c_compiler_gnu=$ac_compiler_gnu
+ 
+-fi
+-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+-GCC=`test $ac_compiler_gnu = yes && echo yes`
+-ac_test_CFLAGS=${CFLAGS+set}
+-ac_save_CFLAGS=$CFLAGS
+-CFLAGS="-g"
+-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+-if test "${ac_cv_prog_cc_g+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++ac_test_CFLAGS="${CFLAGS+set}"
++ac_save_CFLAGS="$CFLAGS"
++CFLAGS=
++echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
++echo "configure:837: checking whether ${CC-cc} accepts -g" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+-  cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-
+-int
+-main ()
+-{
+-
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
++  echo 'void f(){}' > conftest.c
++if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+   ac_cv_prog_cc_g=yes
+ else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++  ac_cv_prog_cc_g=no
++fi
++rm -f conftest*
+ 
+-ac_cv_prog_cc_g=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
+-fi
+-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
++
++echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+-  CFLAGS=$ac_save_CFLAGS
++  CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+   if test "$GCC" = yes; then
+     CFLAGS="-g -O2"
+@@ -2028,304 +863,37 @@
+     CFLAGS=
+   fi
+ fi
+-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  ac_cv_prog_cc_stdc=no
+-ac_save_CC=$CC
+-cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-#include <stdarg.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+-struct buf { int x; };
+-FILE * (*rcsopen) (struct buf *, struct stat *, int);
+-static char *e (p, i)
+-     char **p;
+-     int i;
+-{
+-  return p[i];
+-}
+-static char *f (char * (*g) (char **, int), char **p, ...)
+-{
+-  char *s;
+-  va_list v;
+-  va_start (v,p);
+-  s = g (p, va_arg (v,int));
+-  va_end (v);
+-  return s;
+-}
+-int test (int i, double x);
+-struct s1 {int (*f) (int a);};
+-struct s2 {int (*f) (double a);};
+-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+-int argc;
+-char **argv;
+-int
+-main ()
+-{
+-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-# Don't try gcc -ansi; that turns off useful extensions and
+-# breaks some systems' header files.
+-# AIX			-qlanglvl=ansi
+-# Ultrix and OSF/1	-std1
+-# HP-UX 10.20 and later	-Ae
+-# HP-UX older versions	-Aa -D_HPUX_SOURCE
+-# SVR4			-Xc -D__EXTENSIONS__
+-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+-do
+-  CC="$ac_save_CC $ac_arg"
+-  rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  ac_cv_prog_cc_stdc=$ac_arg
+-break
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+ 
+-fi
+-rm -f conftest.$ac_objext
+-done
+-rm -f conftest.$ac_ext conftest.$ac_objext
+-CC=$ac_save_CC
+-
+-fi
+-
+-case "x$ac_cv_prog_cc_stdc" in
+-  x|xno)
+-    echo "$as_me:$LINENO: result: none needed" >&5
+-echo "${ECHO_T}none needed" >&6 ;;
+-  *)
+-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+-esac
+-
+-# Some people use a C++ compiler to compile C.  Since we use `exit',
+-# in C++ we need to declare it.  In case someone uses the same compiler
+-# for both compiling C and C++ we need to have the C++ compiler decide
+-# the declaration of exit, since it's the most demanding environment.
+-cat >conftest.$ac_ext <<_ACEOF
+-#ifndef __cplusplus
+-  choke me
+-#endif
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  for ac_declaration in \
+-   ''\
+-   '#include <stdlib.h>' \
+-   'extern "C" void std::exit (int) throw (); using std::exit;' \
+-   'extern "C" void std::exit (int); using std::exit;' \
+-   'extern "C" void exit (int) throw ();' \
+-   'extern "C" void exit (int);' \
+-   'void exit (int);'
+-do
+-  cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-#include <stdlib.h>
+-$ac_declaration
+-int
+-main ()
+-{
+-exit (42);
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  :
++# Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
++echo "configure:871: checking for $ac_word" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-continue
+-fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
+-  cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-$ac_declaration
+-int
+-main ()
+-{
+-exit (42);
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+-  (eval $ac_compile) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-         { ac_try='test -s conftest.$ac_objext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  break
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
+-done
+-rm -f conftest*
+-if test -n "$ac_declaration"; then
+-  echo '#ifdef __cplusplus' >>confdefs.h
+-  echo $ac_declaration      >>confdefs.h
+-  echo '#endif'             >>confdefs.h
+-fi
+-
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-
+-if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_RANLIB+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+   if test -n "$RANLIB"; then
+   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
++  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
++  ac_dummy="$PATH"
++  for ac_dir in $ac_dummy; do
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$ac_word; then
++      ac_cv_prog_RANLIB="ranlib"
++      break
++    fi
++  done
++  IFS="$ac_save_ifs"
++  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+ fi
+ fi
+-RANLIB=$ac_cv_prog_RANLIB
++RANLIB="$ac_cv_prog_RANLIB"
+ if test -n "$RANLIB"; then
+-  echo "$as_me:$LINENO: result: $RANLIB" >&5
+-echo "${ECHO_T}$RANLIB" >&6
++  echo "$ac_t""$RANLIB" 1>&6
+ else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
++  echo "$ac_t""no" 1>&6
+ fi
+ 
+-fi
+-if test -z "$ac_cv_prog_RANLIB"; then
+-  ac_ct_RANLIB=$RANLIB
+-  # Extract the first word of "ranlib", so it can be a program name with args.
+-set dummy ranlib; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$ac_ct_RANLIB"; then
+-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_ac_ct_RANLIB="ranlib"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
+-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+-fi
+-fi
+-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+-if test -n "$ac_ct_RANLIB"; then
+-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-  RANLIB=$ac_ct_RANLIB
+-else
+-  RANLIB="$ac_cv_prog_RANLIB"
+-fi
+-
+ # Find a good install program.  We prefer a C program (faster),
+ # so one script is as good as another.  But avoid the broken or
+ # incompatible versions:
+@@ -2333,306 +901,158 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
+-# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
++echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
++echo "configure:910: checking for a BSD compatible install" >&5
+ if test -z "$INSTALL"; then
+-if test "${ac_cv_path_install+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  # Account for people who put trailing slashes in PATH elements.
+-case $as_dir/ in
+-  ./ | .// | /cC/* | \
+-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+-  /usr/ucb/* ) ;;
+-  *)
+-    # OSF1 and SCO ODT 3.0 have their own names for install.
+-    # Don't use installbsd from OSF since it installs stuff as root
+-    # by default.
+-    for ac_prog in ginstall scoinst install; do
+-      for ac_exec_ext in '' $ac_executable_extensions; do
+-        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+-          if test $ac_prog = install &&
+-            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+-            # AIX install.  It has an incompatible calling convention.
+-            :
+-          elif test $ac_prog = install &&
+-            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+-            # program-specific install script used by HP pwplus--don't use.
+-            :
+-          else
+-            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+-            break 3
+-          fi
+-        fi
++    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
++  for ac_dir in $PATH; do
++    # Account for people who put trailing slashes in PATH elements.
++    case "$ac_dir/" in
++    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
++    *)
++      # OSF1 and SCO ODT 3.0 have their own names for install.
++      # Don't use installbsd from OSF since it installs stuff as root
++      # by default.
++      for ac_prog in ginstall scoinst install; do
++        if test -f $ac_dir/$ac_prog; then
++	  if test $ac_prog = install &&
++            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
++	    # AIX install.  It has an incompatible calling convention.
++	    :
++	  else
++	    ac_cv_path_install="$ac_dir/$ac_prog -c"
++	    break 2
++	  fi
++	fi
+       done
+-    done
+-    ;;
+-esac
+-done
++      ;;
++    esac
++  done
++  IFS="$ac_save_IFS"
+ 
+-
+ fi
+   if test "${ac_cv_path_install+set}" = set; then
+-    INSTALL=$ac_cv_path_install
++    INSTALL="$ac_cv_path_install"
+   else
+     # As a last resort, use the slow shell script.  We don't cache a
+     # path for INSTALL within a source directory, because that will
+     # break other packages using the cache if that directory is
+     # removed, or if the path is relative.
+-    INSTALL=$ac_install_sh
++    INSTALL="$ac_install_sh"
+   fi
+ fi
+-echo "$as_me:$LINENO: result: $INSTALL" >&5
+-echo "${ECHO_T}$INSTALL" >&6
++echo "$ac_t""$INSTALL" 1>&6
+ 
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+ 
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+ 
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+ 
+-if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
++if test $host != $build; then
++  ac_tool_prefix=${host_alias}-
++else
++  ac_tool_prefix=
++fi
++
++# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ar; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_AR+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
++echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
++echo "configure:971: checking for $ac_word" >&5
++if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
++  echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   if test -n "$AR"; then
+   ac_cv_prog_AR="$AR" # Let the user override the test.
+ else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_AR="${ac_tool_prefix}ar"
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

new file mode 100644
index 0000000..e1e7aed

Lines of this file are not shown. View the raw message.

new file mode 100644
index 0000000..51012e6

Lines of this file are not shown. View the raw message.

new file mode 100644
index 0000000..401c836

Lines of this file are not shown. View the raw message.

new file mode 100644
index 0000000..d15d496
@@ -0,0 +1,27 @@
+require espeak.inc
+
+inherit native
+
+PACKAGES = "${PN}"
+FILES_${PN} = "${layout_datadir}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+TARGET_ARCH = "${MACHINE_ARCH}"
+
+do_compile() {
+        # Fixing byte order of phoneme data files
+        cd "${S}/platforms/big_endian"
+        sed -i '/^ *CC *=/d' Makefile
+        sed -i 's/\(.*BYTE_ORDER\)/#undef BYTE_ORDER\n#define BYTE_ORDER BIG_ENDIAN\n\1/' espeak-phoneme-data.c
+        oe_runmake
+        ./espeak-phoneme-data "${S}/espeak-data"
+        cp -f phondata phonindex phontab "${S}/espeak-data"
+}
+
+do_install() {
+        install -d ${D}${layout_datadir}/espeak-data
+        install -m 0644 ${S}/espeak-data/phon* ${D}${layout_datadir}/espeak-data
+}
+
+SRC_URI[md5sum] = "5c7b292d0537232868b4ac1317d76c02"
+SRC_URI[sha256sum] = "77f406c345362185ec4f362bf49f61d202e01ac9b9cd5c14f803195a544ce6d3"

new file mode 100644
index 0000000..98a1765
@@ -0,0 +1,10 @@
+DESCRIPTION = "eSpeak is a compact open source software speech synthesizer"
+SECTION = "base"
+LICENSE = "GPLv3"
+LIC_FILES_CHKSUM = "file://License.txt;md5=cb7a20edb4c9f5f478de6523dcd7362c"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/espeak/espeak-${PV}-source.zip"
+
+S = "${WORKDIR}/espeak-${PV}-source"
+
+DEPENDS = "portaudio-v19"

42 lines not on this page · raw message

new file mode 100644
index 0000000..d333b92
@@ -0,0 +1,6 @@
+
+def get_navit_fpu_setting(bb, d):
+	if bb.data.getVar('TARGET_FPU', d, 1) in [ 'soft' ]:
+		return "--enable-avoid-float"
+	return ""
+

339 lines not on this page · raw message

70 lines not on this page · raw message

new file mode 100644
index 0000000..116ff43
@@ -0,0 +1,35 @@
+DESCRIPTION = "Navit is a car navigation system with routing engine."
+LICENSE = "GPLv2"
+# taken from main navit package
+LIC_FILES_CHKSUM = "file://${WORKDIR}/GPL-2;md5=751419260aa954499f7abaabaa882bbe"
+SECTION = "x11/applications"
+DEPENDS = "glib-2.0 gtk+ imagemagick-native librsvg-native"
+
+#only icons present in the package
+PACKAGE_ARCH = "all"
+
+PV = "0.1.0+svnr${SRCPV}"
+PR = "r2"
+
+EXTRA_OECONF = "--disable-binding-python --disable-gui-sdl --disable-samplemap --enable-avoid-float --enable-avoid-unaligned  --enable-svg2png-scaling-flag=32 --disable-speech-speech-dispatcher"
+
+S = "${WORKDIR}/xpm"
+
+inherit autotools
+
+FILES_${PN} = " /usr/share/navit/xpm/"
+
+SRCREV = "3915"
+
+#use different URL than navit_svn does, to prevent upgrade/downgrade cycle in downloads dir
+SRC_URI = "svn://[email protected]/svnroot/navit/trunk/navit/navit;module=xpm;proto=https \
+           file://GPL-2 \
+           file://configure.in"
+
+do_configure_prepend() {
+  cp ${WORKDIR}/configure.in ${S}/
+  # replace include with just xpmdir variable
+  sed -i 's#.*Makefile.inc.*#xpmdir=$(pkgdatadir)/xpm#g' ${S}/Makefile.am
+  # don't install desktopfile and icons
+  sed -i 's/^\(EXTRADIST.*\) $(DESKTOPFILE_DATA) $(ICON128_DATA) $(ICON22_DATA) \(.*\)$/\1\2/g' ${S}/Makefile.am
+}

93 lines not on this page · raw message

new file mode 100644
index 0000000..6f59f20
@@ -0,0 +1,24 @@
+                <!-- If you have the reiseplaner maps installed, set enabled="yes" in the next line and set the path correctly -->
+                <mapset enabled="no">
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map"/>
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map/smp1.smp"/>
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map/smp2.smp"/>
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map/smp3.smp"/>
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map/smp4.smp"/>
+                        <map type="mg" enabled="yes" data="/opt/reiseplaner/travel/DE.map/smp5.smp"/>
+                </mapset>
+
+                <!-- If you dont want to use the sample map, either set enabled="no" in the next line or remove the xml file from the maps directory -->
+                <mapset enabled="no">
+                        <xi:include href="$NAVIT_SHAREDIR/maps/*.xml"/>
+                </mapset>
+
+                <!-- Mapset template for openstreetmaps -->
+                <mapset enabled="yes">
+                        <map type="binfile" enabled="yes" data="/media/mmc2/MapsNavit/osm_europe.bin"/>
+                </mapset>
+
+                <!-- Mapset template for garmin maps -->
+                <mapset enabled="no">
+                        <map type="garmin" enabled="yes" data="/path/to/img" debug="4"/>
+                </mapset>

45 lines not on this page · raw message

new file mode 100644
index 0000000..2d0f9ff
@@ -0,0 +1,15 @@
+                <!-- osd items allow to position display and control items directly on top of the map: -->
+                <osd enabled="no" type="compass"/>
+                <osd enabled="no" type="eta"/>
+                <osd enabled="no" type="navigation_distance_to_target"/>
+                <osd enabled="no" type="navigation"/>
+                <osd enabled="no" type="navigation_distance_to_next"/>
+                <osd enabled="no" type="navigation_next_turn"/>
+
+                <!-- Commands include gui_internal_menu, gui_internal_fullscreen, zoom_in and zoom_out.
+                         Usage of negative values change the button origins. x="0" y="0" specifies the top left, x="-0" y="-0" the bottom right corner.
+                         It's always the top left corner of the icon, so you need to consider the icon's size when you enter the values. -->
+                <osd enabled="no" type="button" x="0" y="0" command="gui.fullscreen()" src="toggle_fullscreen.xpm"/>
+                <osd enabled="no" type="button" x="-96" y="0" command="gui.menu()" src="menu.xpm"/>
+                <osd enabled="no" type="button" x="-96" y="-96" command="zoom_in()" src="zoom_in.xpm"/>
+                <osd enabled="no" type="button" x="0" y="-96" command="zoom_out()" src="zoom_out.xpm"/>

new file mode 100644
index 0000000..015b055
@@ -0,0 +1,6 @@
+<plugins>
+	<plugin path="$NAVIT_LIBDIR/*/${NAVIT_LIBPREFIX}lib*.so" ondemand="yes"/>
+	<plugin path="$NAVIT_LIBDIR/autoload/${NAVIT_LIBPREFIX}lib*.so"/>
+	<plugin path="$NAVIT_LIBDIR/*/${NAVIT_LIBPREFIX}libbinding_dbus.so" active="yes"/>
+	<plugin path="$NAVIT_LIBDIR/*/${NAVIT_LIBPREFIX}libgraphics_null.so" active="no"/>
+</plugins>

new file mode 100644
index 0000000..28c4990
@@ -0,0 +1,8 @@
+                <!-- Navit provides speech output in text format.
+                         If you have a speech synthesizer like festival lite installed, you can get turn by turn directions out of navit. Please set the "cps"-value to how many characters your tts engine approximately speaks per second.
+                         The default is text output to the shell -->
+                <!-- <speech type="cmdline" data="echo 'Fix the speech tag in navit.xml to let navit say:' '%s'" cps="15"/> -->
+                <!-- <speech type="cmdline" data="espeak -s 150 -v czech '%s' &amp;"/> -->
+                <!-- <speech type="cmdline" data="flite -t '%s'"/> -->
+                <!-- <speech type="cmdline" data="/usr/local/bin/say.sh '%s'"/> -->
+                <speech type="cmdline" data="espeak '%s' &amp;"/>

new file mode 100644
index 0000000..b5484fa
@@ -0,0 +1,8 @@
+require navit.inc
+
+SRCREV = "4495"
+PV = "0.2.0+svnr${SRCPV}"
+PR = "${INC_PR}.12"
+
+S = "${WORKDIR}/navit"
+SRC_URI += "svn://[email protected]/svnroot/navit/trunk;module=navit;proto=http "