Skip to contentSkip to conversation

DSA: Enable cascading for multiple 6131 chips

PATCH In review Barry Grussling 2 participants 3 messages Jun 21, 2011 – Jun 25, 2011

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover DSA: Enable cascading for multiple 6131 chips

I found that the Cascade Port field of the 6131 was always set to 0xe which results in from_cpu frames being discarded. This means cascading style multi chip DSA configuration didn't work for me. I am a little confused by this since we configure the DSA routing table a little further down in the function.

It seems like we need to enable cascading by setting the Cascade Port field to 0xf if we are in a multi-chip scenario.

V2 changes are for whitespace to meet coding style.

Barry Grussling (1):
Allow cascading to work with 6131 chip

 net/dsa/mv88e6131.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
#1 lore raw

PATCH v2 1/1 Allow cascading to work with 6131 chip

---
 net/dsa/mv88e6131.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
net/dsa/mv88e6131.c +6 -2
index 45f7411..dc43419 100644
@@ -118,10 +118,14 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
 
 	/*
-	 * Disable cascade port functionality, and set the switch's
+	 * Disable cascade port functionality unless this device is
+	 * used in a cascade configuration, and set the switch's
 	 * DSA device number.
 	 */
-	REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
+	if (ds->dst->pd->nr_chips > 1)
+		REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f));
+	else
+		REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
 
 	/*
 	 * Send all frames with destination addresses matching
Signature · 1 line
1.7.0.4
maintainer
#2 lore raw

Re: [PATCH V2 1/1] Allow cascading to work with 6131 chip

From: Barry Grussling <[email protected]>
Date: Tue, 21 Jun 2011 07:55:56 -0700

Quoted 3 lines
---
 net/dsa/mv88e6131.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)

No commit log message, no signoff...

Please read Documentation/SubmittingPatches, in particular sections 2 "Describe your changes" and 12 "Sign your work".