create meta-initramfs layer

Signed-off-by Andrea Adami <[email protected]>

---
 .../linux/files/qvga/logo_linux_clut224.ppm.bz2    |  Bin 0 -> 5547 bytes .../linux/files/vga/logo_linux_clut224.ppm.bz2     |  Bin 0 -> 6436 bytes ...xx_sharpsl-retain-ops-structure-on-collie.patch |   34 +++++ .../linux/linux-kexecboot-3.1/akita/defconfig      |  132 ++++++++++++++++++ .../linux/linux-kexecboot-3.1/c7x0/defconfig       |  134 ++++++++++++++++++ .../linux/linux-kexecboot-3.1/collie/defconfig     |  144 ++++++++++++++++++++ .../linux-kexecboot-3.1/locomo_kbd_tweak-r2.patch  |   66 +++++++++ .../linux/linux-kexecboot-3.1/poodle/defconfig     |  136 ++++++++++++++++++

 .../linux/linux-kexecboot-3.1/spitz/defconfig      |  132 ++++++++++++++++++
 .../linux/linux-kexecboot-3.1/tosa/defconfig       |  134 ++++++++++++++++++
 .../recipes-kernel/linux/linux-kexecboot.inc       |  136 ++++++++++++++++++
 .../recipes-kernel/linux/linux-kexecboot_3.1.bb    |   15 ++
 12 files changed, 1063 insertions(+), 0 deletions(-)

 create mode 100644 meta-initramfs/recipes-kernel/linux/files/qvga/logo_linux_clut224.ppm.bz2
 create mode 100644 meta-initramfs/recipes-kernel/linux/files/vga/logo_linux_clut224.ppm.bz2
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/0001-pcmcia-pxa2xx_sharpsl-retain-ops-structure-on-collie.patch create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/akita/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/c7x0/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/collie/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/locomo_kbd_tweak-r2.patch
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/poodle/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/spitz/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/tosa/defconfig
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot.inc
 create mode 100644 meta-initramfs/recipes-kernel/linux/linux-kexecboot_3.1.bb

meta-initramfs/recipes-kernel/linux/files/qvga/logo_linux_clut224.ppm.bz2 new file binary +0 -0

new file mode 100644
index 0000000000000000000000000000000000000000..ddc39a3c64dfadcd18c3d3f4489378c59fd649cc
GIT binary patch

meta-initramfs/recipes-kernel/linux/files/vga/logo_linux_clut224.ppm.bz2 new file binary +0 -0

new file mode 100644
index 0000000000000000000000000000000000000000..c3aeaac1833469a6de74f75a77d655d600c5bd99
GIT binary patch

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/0001-pcmcia-pxa2xx_sharpsl-retain-ops-structure-on-collie.patch new file +34 -0

new file mode 100644
index 0000000..d86b47d
@@ -0,0 +1,34 @@
+From 31d99c4c9f14e571ca0e22c5862dd5b6a871e2dd Mon Sep 17 00:00:00 2001
+From: Dmitry Eremin-Solenikov <[email protected]>
+Date: Fri, 5 Aug 2011 15:32:23 +0400
+Subject: [PATCH] pcmcia/pxa2xx_sharpsl: retain ops structure on collie
+
+The pxa2xx_sharpsl driver part is also used on collie, which (as
+a StrongARM board) has different expectations for PCMCIA drivers.
+So, on collie place sharpsl_pcmcia_ops in .data section rather than
+in __initdata.
+
+Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>
+---
+ drivers/pcmcia/pxa2xx_sharpsl.c |    4 ++++
+ 1 files changed, 4 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
+index 81af2b3..1b5b749 100644
+--- a/drivers/pcmcia/pxa2xx_sharpsl.c
++++ b/drivers/pcmcia/pxa2xx_sharpsl.c
+@@ -222,7 +222,11 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+       sharpsl_pcmcia_init_reset(skt);
+ }
+
++#ifdef CONFIG_SA1100_COLLIE
++static struct pcmcia_low_level sharpsl_pcmcia_ops = {
++#else
+ static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
++#endif
+       .owner                  = THIS_MODULE,
+       .hw_init                = sharpsl_pcmcia_hw_init,
+       .hw_shutdown            = sharpsl_pcmcia_hw_shutdown,
+--
+1.7.2.5
+

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/akita/defconfig new file +132 -0

new file mode 100644
index 0000000..b066839
@@ -0,0 +1,132 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttyS0,115200n8 fbcon=rotate:1 loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_SHARPSL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PXA=y
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_I2C_COMPAT is not set
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CORGI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/c7x0/defconfig new file +134 -0

new file mode 100644
index 0000000..b08e27e
@@ -0,0 +1,134 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttyS0,115200n8 loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_SHARPSL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PXA=y
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_W100=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CORGI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SA1100=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/collie/defconfig new file +144 -0

new file mode 100644
index 0000000..ce1299d
@@ -0,0 +1,144 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SA1100=y
+CONFIG_SA1100_COLLIE=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_SA1100=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttySA0,115200n8 fbcon=rotate:1 mem=64M loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_APM_EMULATION=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_CFI_I1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SA1100=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+CONFIG_BATTERY_COLLIE=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+CONFIG_MCP_UCB1200_TS=y
+CONFIG_FB=y
+CONFIG_FB_SA1100=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SA1100=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/locomo_kbd_tweak-r2.patch new file +66 -0

new file mode 100644
index 0000000..0d47ade
@@ -0,0 +1,66 @@
+ drivers/input/keyboard/locomokbd.c |   61 +++++++++++++++++++++++--------------
+ 1 file changed, 39 insertions(+), 22 deletions(-)
+
+Index: linux-2.6.26-rc4/drivers/input/keyboard/locomokbd.c
+===================================================================
+--- linux-2.6.26-rc4.orig/drivers/input/keyboard/locomokbd.c   2008-05-26 19:08:11.000000000 +0100
++++ linux-2.6.26-rc4/drivers/input/keyboard/locomokbd.c        2008-06-01 18:35:55.000000000 +0100
+@@ -41,25 +41,32 @@
+
+ #define LOCOMOKBD_NUMKEYS     128
+
+-#define KEY_ACTIVITY          KEY_F16
+-#define KEY_CONTACT           KEY_F18
+-#define KEY_CENTER            KEY_F15
++#define LOCOMO_KEY_CALENDER   KEY_LEFTCTRL
++#define LOCOMO_KEY_ADDRESS    KEY_LEFTALT     /* Needed for SysRQ */
++#define LOCOMO_KEY_HOME               KEY_SYSRQ       /* Needed for SysRQ */
++#define LOCOMO_KEY_MENU               KEY_F12
++#define LOCOMO_KEY_MAIL               KEY_F10
++#define LOCOMO_KEY_OK         KEY_F11         /* Don't hardwire to KEY_RETURN */
++#define LOCOMO_KEY_CANCEL     KEY_POWER
++#define LOCOMO_KEY_CENTER     KEY_F5          /* Don't hardwire to KEY_RETURN */
+
+-static const unsigned char
++#define LOCOMO_KEY_FN         KEY_F9
++
++static const unsigned char
+ locomokbd_keycode[LOCOMOKBD_NUMKEYS] __devinitconst = {
+-      0, KEY_ESC, KEY_ACTIVITY, 0, 0, 0, 0, 0, 0, 0,                          /* 0 - 9 */
+-      0, 0, 0, 0, 0, 0, 0, KEY_MENU, KEY_HOME, KEY_CONTACT,                   /* 10 - 19 */
+-      0, 0, 0, 0, 0, 0, 0, 0, 0, 0,                                           /* 20 - 29 */
+-      0, 0, 0, KEY_CENTER, 0, KEY_MAIL, 0, 0, 0, 0,                           /* 30 - 39 */
+-      0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT,                                   /* 40 - 49 */
+-      KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T,           /* 50 - 59 */
+-      KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, KEY_ENTER, 0, 0,                    /* 60 - 69 */
+-      KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0,       /* 70 - 79 */
+-      0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J,              /* 80 - 89 */
+-      KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0,                           /* 90 - 99 */
+-      0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A,         /* 100 - 109 */
+-      KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0,              /* 110 - 119 */
+-      KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0             /* 120 - 128 */
++      0, LOCOMO_KEY_CANCEL, LOCOMO_KEY_CALENDER, LOCOMO_KEY_HOME, 0, 0, 0, 0, 0, 0,   /* 0 - 9 */
++      0, 0, 0, 0, 0, 0, 0, LOCOMO_KEY_MENU, 0, LOCOMO_KEY_ADDRESS,                    /* 10 - 19 */
++      0, 0, 0, 0, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0,                                     /* 20 - 29 */
++      0, 0, 0, LOCOMO_KEY_CENTER, 0, LOCOMO_KEY_MAIL, 0, 0, 0, 0,                     /* 30 - 39 */
++      0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RIGHT,                                           /* 40 - 49 */
++      KEY_UP, KEY_LEFT, 0, 0, KEY_P, 0, KEY_O, KEY_I, KEY_Y, KEY_T,                   /* 50 - 59 */
++      KEY_E, KEY_W, 0, 0, 0, 0, KEY_DOWN, LOCOMO_KEY_OK, 0, 0,                        /* 60 - 69 */
++      KEY_BACKSPACE, 0, KEY_L, KEY_U, KEY_H, KEY_R, KEY_D, KEY_Q, 0, 0,               /* 70 - 79 */
++      0, 0, 0, 0, 0, 0, KEY_ENTER, KEY_RIGHTSHIFT, KEY_K, KEY_J,                      /* 80 - 89 */
++      KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0,                                   /* 90 - 99 */
++      0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A,                 /* 100 - 109 */
++      KEY_LEFTSHIFT, KEY_TAB, LOCOMO_KEY_FN, 0, 0, 0, 0, 0, 0, 0,                     /* 110 - 119 */
++      KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0                     /* 120 - 128 */
+ };
+
+ #define KB_ROWS                       16
+@@ -68,7 +75,7 @@
+ #define SCANCODE(c,r)         ( ((c)<<4) + (r) + 1 )
+
+ #define KB_DELAY              8
+-#define SCAN_INTERVAL         (HZ/10)
++#define SCAN_INTERVAL         (HZ/20)
+
+ struct locomokbd {
+       unsigned char keycode[LOCOMOKBD_NUMKEYS];

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/poodle/defconfig new file +136 -0

new file mode 100644
index 0000000..68c37e6
@@ -0,0 +1,136 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y
+CONFIG_MACH_POODLE=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttyS0,115200n8 fbcon=rotate:1 loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_APM_EMULATION=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_SHARPSL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PXA=y
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SA1100=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/spitz/defconfig new file +132 -0

new file mode 100644
index 0000000..b066839
@@ -0,0 +1,132 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttyS0,115200n8 fbcon=rotate:1 loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_SHARPSL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PXA=y
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_I2C_COMPAT is not set
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CORGI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot-3.1/tosa/defconfig new file +134 -0

new file mode 100644
index 0000000..59cf640
@@ -0,0 +1,134 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="initramfs.cpio.lzma"
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_LZMA=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_LBDAF is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y
+CONFIG_MACH_TOSA=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 console=ttyS0,115200n8 loglevel=3"
+CONFIG_KEXEC=y
+CONFIG_APM_EMULATION=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_TMIO=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_PXA=y
+CONFIG_PATA_PCMCIA=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_APMPOWER=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TC6393XB=y
+CONFIG_FB=y
+CONFIG_FB_TMIO=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_TOSA=y
+CONFIG_BACKLIGHT_TOSA=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SA1100=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

meta-initramfs/recipes-kernel/linux/linux-kexecboot.inc new file +136 -0

new file mode 100644
index 0000000..28b9ec2
@@ -0,0 +1,136 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+INC_PR = "r2"
+
+inherit kernel siteinfo
+
+# FILESEXTRAPATHS cannot be used, because it puts extra paths before FILESPATH and we need it at the end
+# only as fallback for patches available only in linux-PV dir and ie defconfigs needs to go from linux-kexecboot-PV
+FILESPATH_append = ":${FILE_DIRNAME}/linux-${PV}"
+
+DEPENDS += "xz-native"
+
+# Kernel bootlogo is distro-specific (default is OE logo).
+# Logo resolution (qvga, vga, ...) is machine-specific.
+LOGO_SIZE ?= "."
+# To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
+# to your kernel recipe, and then structure your logos for each resolution
+# accordingly.
+
+# Set the verbosity of kernel messages during runtime
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
+CMDLINE_DEBUG ?= "loglevel=3"
+
+# Note we set loglevel=3 and master console on serial to protect bootlogo.
+
+PACKAGES = ""
+PROVIDES = ""
+
+KERNEL_IMAGE_BASE_NAME = "${KERNEL_IMAGETYPE}-kexecboot-${PV}-${PR}-${MACHINE}"
+KERNEL_IMAGE_SYMLINK_NAME = "${KERNEL_IMAGETYPE}-kexecboot-${MACHINE}"
+
+LOCALVERSION ?= ""
+
+# we want the smallest size
+INITRAMFS_IMAGE = "initramfs-kexecboot-klibc-image"
+
+kernel_conf_variable() {
+        CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+        if test "$2" = "n"
+        then
+                echo "# CONFIG_$1 is not set" >> ${S}/.config
+        else
+                echo "CONFIG_$1=$2" >> ${S}/.config
+        fi
+}
+
+do_configure_prepend() {
+
+        echo "" > ${S}/.config
+        CONF_SED_SCRIPT=""
+
+        #
+        # CONFIG_CMDLINE mangling
+        #
+        kernel_conf_variable CMDLINE_BOOL y
+        kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""
+
+        # mips and x86
+        kernel_conf_variable CMDLINE_OVERRIDE y
+
+        # sh only
+        kernel_conf_variable CMDLINE_OVERWRITE y
+        kernel_conf_variable CMDLINE_EXTEND n
+
+        #
+        # endian support
+        #
+        if [ "${SITEINFO_ENDIANNESS}" = "be" ]; then
+                kernel_conf_variable CPU_BIG_ENDIAN y
+        fi
+
+        #
+        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it is going to be used
+        #
+        if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+                install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+                kernel_conf_variable LOGO y
+                kernel_conf_variable LOGO_LINUX_CLUT224 y
+        fi
+
+        # When enabling thumb for userspace we also need thumb support in the kernel
+        if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
+                kernel_conf_variable ARM_THUMB y
+        fi
+
+        kernel_conf_variable LOCALVERSION "\"${LOCALVERSION}\""
+        kernel_conf_variable LOCALVERSION_AUTO n
+
+        # Force sane defaults for kexec-enabled kernels and keep size small
+        kernel_conf_variable BLK_DEV_INITRD y
+        kernel_conf_variable KEXEC y
+        CONF_SED_SCRIPT="$CONF_SED_SCRIPT /=m/d;"
+        kernel_conf_variable MODULES n
+        if ${@base_contains("CMDLINE_DEBUG", "debug", "true", "false", d)}; then
+                kernel_conf_variable DEBUG_LL y
+                kernel_conf_variable PRINTK y
+                kernel_conf_variable EARLY_PRINTK y
+                kernel_conf_variable BUG y
+                kernel_conf_variable DEBUG_ERRORS y
+                kernel_conf_variable DEBUG_BUGVERBOSE y
+                kernel_conf_variable DEBUG_KERNEL y
+        else
+                kernel_conf_variable DEBUG_ERRORS n
+                kernel_conf_variable DEBUG_BUGVERBOSE n
+                kernel_conf_variable DEBUG_KERNEL n
+        fi
+
+        # Force lzma for arm kernels only
+        if [ "${ARCH}" = "arm" ] ; then
+                CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_KERNEL/d;"
+                CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_RD/d;"
+                CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_INITRAMFS_COMPRESSION/d;"
+                CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_INITRAMFS_SOURCE/d;"
+                kernel_conf_variable KERNEL_LZMA y
+                kernel_conf_variable RD_LZMA y
+                kernel_conf_variable INITRAMFS_COMPRESSION_LZMA y
+                kernel_conf_variable INITRAMFS_SOURCE "\"initramfs.cpio.lzma\""
+        fi
+
+        sed -e "${CONF_SED_SCRIPT}" \
+                        < '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        yes '' | oe_runmake oldconfig
+}
+
+do_populate_sysroot() {
+        :
+}
+
+do_install() {
+        :
+}
+

meta-initramfs/recipes-kernel/linux/linux-kexecboot_3.1.bb new file +15 -1

new file mode 100644
index 0000000..466efd4
@@ -0,0 +1,15 @@
+require linux-kexecboot.inc
+
+PR = "${INC_PR}.8"
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI += "${KERNELORG_MIRROR}/linux/kernel/v3.x/linux-${PV}.tar.bz2;name=kernel \
+           ${KERNELORG_MIRROR}/linux/kernel/v3.x/patch-${PV}.10.bz2;apply=yes;name=stablepatch \
+           file://defconfig \
+           file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 \
+           "
+
+SRC_URI[kernel.md5sum] = "8d43453f8159b2332ad410b19d86a931"
+SRC_URI[kernel.sha256sum] = "2573d2378c754b0c602b57586e9311e5b38c5d1e6c137f02873833633a4b9359"
+SRC_URI[stablepatch.md5sum] = "a8e1c25a93a685ec2a1c3a808715fe9d"
+SRC_URI[stablepatch.sha256sum] = "f25126052d1a083a415ddd313b40c7fcdb3742f40474cb4a826af7e43fee29d3"
--

1.7.3.4

Signed-off-by Andrea Adami <[email protected]> ---

meta-initramfs/README          |   14 ++++++++++++++ 
meta-initramfs/conf/layer.conf |   11 +++++++++++

+Interim layer maintainer: Koen Kooi <[email protected]>

* (purged from device specific settings)

Signed-off-by Andrea Adami <[email protected]>

---
 .../recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb     |   61 ++++++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot-klibc_git.bb   |   12 ++++ meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc |   54 +++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot_git.bb         |    9 +++

 4 files changed, 136 insertions(+), 0 deletions(-)

 create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb

meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb new file +61 -0

new file mode 100644
index 0000000..84c1116
@@ -0,0 +1,61 @@
+DESCRIPTION = "Configuration file for kexecboot"
+SECTION = "base"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
+
+PR = "r13"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRC_URI = "file://icon.xpm"
+
+CMDLINE ?= ""
+CMDLINE_DEBUG ?= "${@base_conditional('DISTRO_TYPE', 'release', 'quiet', 'debug',d)}"
+
+# Note: for qvga the label is currently limited to about 24 chars
+KEXECBOOT_LABEL ?= "${@d.getVar('DISTRO', True) or d.getVar('DISTRO_VERSION', True)}-${MACHINE}"
+
+do_configure_prepend () {
+    install -m 0644 ${WORKDIR}/icon.xpm ${S}
+}
+
+do_install_prepend () {
+echo '# First kernel stanza.
+# Specify full kernel path on target.
+KERNEL=/boot/${KERNEL_IMAGETYPE}
+
+# Show this label in kexecboot menu.
+LABEL=${KEXECBOOT_LABEL}
+#
+# Append this tags to the kernel cmdline.
+APPEND=${CMDLINE} ${CMDLINE_DEBUG}
+#
+# Specify optional initrd/initramfs.
+# INITRD=/boot/initramfs.cpio.gz
+#
+# Specify full path for a custom icon for the menu-item.
+# If not set, use device-icons as default (NAND, SD, CF, ...).
+# ICON=/boot/icon.xpm
+#
+# Priority of item in kexecboot menu.
+# Items with highest priority will be shown at top of menu.
+# Default: 0 (lowest, ordered by device ordering)
+# PRIORITY=10
+#
+#
+# Second kernel stanza.
+# KERNEL=/boot/${KERNEL_IMAGETYPE}-test
+# LABEL=${DISTRO}-${MACHINE}-test
+# APPEND=${CMDLINE}
+#' >> ${S}/boot.cfg
+}
+
+do_install () {
+        install -d ${D}/boot
+        install -m 0644 boot.cfg ${D}/boot/boot.cfg
+        install -m 0644 icon.xpm ${D}/boot/icon.xpm
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += "/boot/*"

meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb new file +12 -0

new file mode 100644
index 0000000..0d6d00f
@@ -0,0 +1,12 @@
+RDEPENDS_${PN} = "kexec-klibc"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+# the binary is statically linked against klibc
+inherit klibc
+
+require kexecboot.inc

meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc new file +54 -0

new file mode 100644
index 0000000..a205904
@@ -0,0 +1,54 @@
+###########################
+# Configure options:
+#
+#  --enable-static-linking compile kexecboot as static executable [default=no]
+#  --enable-fbui           support framebuffer menu [default=yes]
+#  --enable-fbui-width     limit FB UI width to specified value [default=no]
+#  --enable-fbui-height    limit FB UI height to specified value [default=no]
+#  --enable-textui         support console text user interface [default=no]
+#  --enable-cfgfiles       support config files [default=yes]
+#  --enable-icons          support custom icons (depends on fbui) [default=yes]
+#  --enable-zaurus         compile Sharp Zaurus specific code [default=no]
+#  --enable-zimage         compile with zImage support [default=yes]
+#  --enable-uimage         compile with uImage support [default=no]
+#  --enable-machine-kernel look for machine-specific zImage kernel [default=no]
+#  --enable-devices-recreating
+#                          enable devices re-creating [default=yes]
+#  --enable-debug          enable debug output [default=no]
+#  --enable-host-debug     allow for non-destructive executing of kexecboot on
+#                            host system [default=no]
+#  --enable-numkeys        enable menu item selection by keys [0-9] [default=yes]
+#  --enable-bg-buffer      enable buffer for pre-drawed FB GUI background
+#
+#  --enable-timeout        allow to boot 1st kernel after timeout in seconds
+#                            [default=no]
+#  --enable-delay          specify delay before device scanning, allowing
+#                            initialization of old CF/SD cards [default=1]
+#  --enable-bpp            enable support of specified bpp modes
+#                            (all,32,24,18,16,4,2,1) [default=all]
+#  --enable-evdev-rate     change evdev (keyboard/mouse) repeat rate
+#                            in milliseconds e.g. "1000,250" [default=no]
+#  --with-kexec-binary     look for kexec binary at path
+#                            [default="/usr/sbin/kexec"]
+##########################
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+inherit autotools
+
+EXTRA_OECONF = "--enable-delay=2 --enable-evdev-rate=1000,250"
+
+do_install () {
+        install -d ${D}${bindir}
+        install -m 0755 kexecboot ${D}${bindir}/
+        install -d ${D}/proc
+        install -d ${D}/mnt
+        install -d ${D}/dev
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt /dev"
+
+pkg_postinst_${PN} () {
+        ln -sf ${bindir}/kexecboot $D/init
+}

meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb new file +9 -1

new file mode 100644
index 0000000..1341461
@@ -0,0 +1,9 @@
+RDEPENDS_${PN} = "kexec"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+require kexecboot.inc
--

1.7.3.4

Quoted 1 line · Andrea Adami

* (purged from device specific settings)

Quoted 174 lines

Signed-off-by Andrea Adami <[email protected]>

---
 .../recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb     |   61 ++++++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot-klibc_git.bb   |   12 ++++ meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc |   54 +++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot_git.bb         |    9 +++

 4 files changed, 136 insertions(+), 0 deletions(-)

 create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb

meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb new file +61 -0

new file mode 100644
index 0000000..84c1116
@@ -0,0 +1,61 @@
+DESCRIPTION = "Configuration file for kexecboot"
+SECTION = "base"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
+
+PR = "r13"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRC_URI = "file://icon.xpm"
+
+CMDLINE ?= ""
+CMDLINE_DEBUG ?= "${@base_conditional('DISTRO_TYPE', 'release', 'quiet', 'debug',d)}"
+
+# Note: for qvga the label is currently limited to about 24 chars
+KEXECBOOT_LABEL ?= "${@d.getVar('DISTRO', True) or d.getVar('DISTRO_VERSION', True)}-${MACHINE}"
+
+do_configure_prepend () {
+    install -m 0644 ${WORKDIR}/icon.xpm ${S}
+}
+
+do_install_prepend () {
+echo '# First kernel stanza.
+# Specify full kernel path on target.
+KERNEL=/boot/${KERNEL_IMAGETYPE}
+
+# Show this label in kexecboot menu.
+LABEL=${KEXECBOOT_LABEL}
+#
+# Append this tags to the kernel cmdline.
+APPEND=${CMDLINE} ${CMDLINE_DEBUG}
+#
+# Specify optional initrd/initramfs.
+# INITRD=/boot/initramfs.cpio.gz
+#
+# Specify full path for a custom icon for the menu-item.
+# If not set, use device-icons as default (NAND, SD, CF, ...).
+# ICON=/boot/icon.xpm
+#
+# Priority of item in kexecboot menu.
+# Items with highest priority will be shown at top of menu.
+# Default: 0 (lowest, ordered by device ordering)
+# PRIORITY=10
+#
+#
+# Second kernel stanza.
+# KERNEL=/boot/${KERNEL_IMAGETYPE}-test
+# LABEL=${DISTRO}-${MACHINE}-test
+# APPEND=${CMDLINE}
+#' >> ${S}/boot.cfg
+}
+
+do_install () {
+        install -d ${D}/boot
+        install -m 0644 boot.cfg ${D}/boot/boot.cfg
+        install -m 0644 icon.xpm ${D}/boot/icon.xpm
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += "/boot/*"

meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb new file +12 -0

new file mode 100644
index 0000000..0d6d00f
@@ -0,0 +1,12 @@
+RDEPENDS_${PN} = "kexec-klibc"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+# the binary is statically linked against klibc
+inherit klibc
+
+require kexecboot.inc

meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc new file +54 -0

new file mode 100644
index 0000000..a205904
@@ -0,0 +1,54 @@
+###########################
+# Configure options:
+#
+#  --enable-static-linking compile kexecboot as static executable [default=no]
+#  --enable-fbui           support framebuffer menu [default=yes]
+#  --enable-fbui-width     limit FB UI width to specified value [default=no]
+#  --enable-fbui-height    limit FB UI height to specified value [default=no]
+#  --enable-textui         support console text user interface [default=no]
+#  --enable-cfgfiles       support config files [default=yes]
+#  --enable-icons          support custom icons (depends on fbui) [default=yes]
+#  --enable-zaurus         compile Sharp Zaurus specific code [default=no]
+#  --enable-zimage         compile with zImage support [default=yes]
+#  --enable-uimage         compile with uImage support [default=no]
+#  --enable-machine-kernel look for machine-specific zImage kernel [default=no]
+#  --enable-devices-recreating
+#                          enable devices re-creating [default=yes]
+#  --enable-debug          enable debug output [default=no]
+#  --enable-host-debug     allow for non-destructive executing of kexecboot on
+#                            host system [default=no]
+#  --enable-numkeys        enable menu item selection by keys [0-9] [default=yes]
+#  --enable-bg-buffer      enable buffer for pre-drawed FB GUI background
+#
+#  --enable-timeout        allow to boot 1st kernel after timeout in seconds
+#                            [default=no]
+#  --enable-delay          specify delay before device scanning, allowing
+#                            initialization of old CF/SD cards [default=1]
+#  --enable-bpp            enable support of specified bpp modes
+#                            (all,32,24,18,16,4,2,1) [default=all]
+#  --enable-evdev-rate     change evdev (keyboard/mouse) repeat rate
+#                            in milliseconds e.g. "1000,250" [default=no]
+#  --with-kexec-binary     look for kexec binary at path
+#                            [default="/usr/sbin/kexec"]
+##########################
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+inherit autotools
+
+EXTRA_OECONF = "--enable-delay=2 --enable-evdev-rate=1000,250"
+
+do_install () {
+        install -d ${D}${bindir}
+        install -m 0755 kexecboot ${D}${bindir}/
+        install -d ${D}/proc
+        install -d ${D}/mnt
+        install -d ${D}/dev
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt /dev"
+
+pkg_postinst_${PN} () {
+        ln -sf ${bindir}/kexecboot $D/init
+}

meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb new file +9 -1

new file mode 100644
index 0000000..1341461
@@ -0,0 +1,9 @@
+RDEPENDS_${PN} = "kexec"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+require kexecboot.inc
--

Quoted 2 lines

1.7.3.4

Unfortunately I forgot to add /kexecboot-cfg/icon.xpm I'll send a separate patch to fix the things in meta-initramfs.

Regards

Andrea

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Quoted 2 lines · Andrea Adami

Quoted 1 line · Andrea Adami

* (purged from device specific settings)

With this patchset applied to meta-oe and current meta-handheld master I get strange bitbake error while parsing:

OE qemux86-64@shr ~/shr-core $ bitbake mcnavi
Pseudo is not present but is required, building this first before the main build
NOTE: Out of date cache found, rebuilding...
ERROR: Command execution failed: Exited with 1                                                                                                                                                                                | ETA:  0:00:36
Summary: There were 0 ERROR messages shown, returning a non-zero exit code.

IIRC someone reported same error message yesterday on IRC or ML.

Removing meta-handheld from bblayers.conf allows me to finish parsing and adding new meta-initramfs to bblayers.conf works too.

Maybe it's some require/include/inherit without corresponding file available, but for those it was showing reasonable error message before..

Cheers,

Quoted 181 lines

Quoted 175 lines

Signed-off-by Andrea Adami <[email protected]>

---
 .../recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb     |   61 ++++++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot-klibc_git.bb   |   12 ++++ meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc |   54 +++++++++++++++++ .../recipes-bsp/kexecboot/kexecboot_git.bb         |    9 +++

 4 files changed, 136 insertions(+), 0 deletions(-)

 create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc create mode 100644 meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb

meta-initramfs/recipes-bsp/kexecboot/kexecboot-cfg_0.1.bb new file +61 -0

new file mode 100644
index 0000000..84c1116
@@ -0,0 +1,61 @@
+DESCRIPTION = "Configuration file for kexecboot"
+SECTION = "base"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
+
+PR = "r13"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRC_URI = "file://icon.xpm"
+
+CMDLINE ?= ""
+CMDLINE_DEBUG ?= "${@base_conditional('DISTRO_TYPE', 'release', 'quiet', 'debug',d)}"
+
+# Note: for qvga the label is currently limited to about 24 chars
+KEXECBOOT_LABEL ?= "${@d.getVar('DISTRO', True) or d.getVar('DISTRO_VERSION', True)}-${MACHINE}"
+
+do_configure_prepend () {
+    install -m 0644 ${WORKDIR}/icon.xpm ${S}
+}
+
+do_install_prepend () {
+echo '# First kernel stanza.
+# Specify full kernel path on target.
+KERNEL=/boot/${KERNEL_IMAGETYPE}
+
+# Show this label in kexecboot menu.
+LABEL=${KEXECBOOT_LABEL}
+#
+# Append this tags to the kernel cmdline.
+APPEND=${CMDLINE} ${CMDLINE_DEBUG}
+#
+# Specify optional initrd/initramfs.
+# INITRD=/boot/initramfs.cpio.gz
+#
+# Specify full path for a custom icon for the menu-item.
+# If not set, use device-icons as default (NAND, SD, CF, ...).
+# ICON=/boot/icon.xpm
+#
+# Priority of item in kexecboot menu.
+# Items with highest priority will be shown at top of menu.
+# Default: 0 (lowest, ordered by device ordering)
+# PRIORITY=10
+#
+#
+# Second kernel stanza.
+# KERNEL=/boot/${KERNEL_IMAGETYPE}-test
+# LABEL=${DISTRO}-${MACHINE}-test
+# APPEND=${CMDLINE}
+#' >> ${S}/boot.cfg
+}
+
+do_install () {
+        install -d ${D}/boot
+        install -m 0644 boot.cfg ${D}/boot/boot.cfg
+        install -m 0644 icon.xpm ${D}/boot/icon.xpm
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += "/boot/*"

meta-initramfs/recipes-bsp/kexecboot/kexecboot-klibc_git.bb new file +12 -0

new file mode 100644
index 0000000..0d6d00f
@@ -0,0 +1,12 @@
+RDEPENDS_${PN} = "kexec-klibc"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+# the binary is statically linked against klibc
+inherit klibc
+
+require kexecboot.inc

meta-initramfs/recipes-bsp/kexecboot/kexecboot.inc new file +54 -0

new file mode 100644
index 0000000..a205904
@@ -0,0 +1,54 @@
+###########################
+# Configure options:
+#
+#  --enable-static-linking compile kexecboot as static executable [default=no]
+#  --enable-fbui           support framebuffer menu [default=yes]
+#  --enable-fbui-width     limit FB UI width to specified value [default=no]
+#  --enable-fbui-height    limit FB UI height to specified value [default=no]
+#  --enable-textui         support console text user interface [default=no]
+#  --enable-cfgfiles       support config files [default=yes]
+#  --enable-icons          support custom icons (depends on fbui) [default=yes]
+#  --enable-zaurus         compile Sharp Zaurus specific code [default=no]
+#  --enable-zimage         compile with zImage support [default=yes]
+#  --enable-uimage         compile with uImage support [default=no]
+#  --enable-machine-kernel look for machine-specific zImage kernel [default=no]
+#  --enable-devices-recreating
+#                          enable devices re-creating [default=yes]
+#  --enable-debug          enable debug output [default=no]
+#  --enable-host-debug     allow for non-destructive executing of kexecboot on
+#                            host system [default=no]
+#  --enable-numkeys        enable menu item selection by keys [0-9] [default=yes]
+#  --enable-bg-buffer      enable buffer for pre-drawed FB GUI background
+#
+#  --enable-timeout        allow to boot 1st kernel after timeout in seconds
+#                            [default=no]
+#  --enable-delay          specify delay before device scanning, allowing
+#                            initialization of old CF/SD cards [default=1]
+#  --enable-bpp            enable support of specified bpp modes
+#                            (all,32,24,18,16,4,2,1) [default=all]
+#  --enable-evdev-rate     change evdev (keyboard/mouse) repeat rate
+#                            in milliseconds e.g. "1000,250" [default=no]
+#  --with-kexec-binary     look for kexec binary at path
+#                            [default="/usr/sbin/kexec"]
+##########################
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+inherit autotools
+
+EXTRA_OECONF = "--enable-delay=2 --enable-evdev-rate=1000,250"
+
+do_install () {
+        install -d ${D}${bindir}
+        install -m 0755 kexecboot ${D}${bindir}/
+        install -d ${D}/proc
+        install -d ${D}/mnt
+        install -d ${D}/dev
+}
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt /dev"
+
+pkg_postinst_${PN} () {
+        ln -sf ${bindir}/kexecboot $D/init
+}

meta-initramfs/recipes-bsp/kexecboot/kexecboot_git.bb new file +9 -1

new file mode 100644
index 0000000..1341461
@@ -0,0 +1,9 @@
+RDEPENDS_${PN} = "kexec"
+PV = "0.5.9"
+PR = "r8+gitr${SRCREV}"
+
+SRC_URI = "git://git.linuxtogo.org/home/groups/kexecboot/kexecboot.git;protocol=git "
+SRCREV = "8f1d3cc3d9c650c6a6c88f83071185d6ee0ef9c7"
+S = "${WORKDIR}/git"
+
+require kexecboot.inc
--

Quoted 2 lines

1.7.3.4

Unfortunately I forgot to add /kexecboot-cfg/icon.xpm I'll send a separate patch to fix the things in meta-initramfs.

Quoted 8 lines

Regards

Andrea

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

--
Martin 'JaMa' Jansa     jabber: [email protected]

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

With this patchset applied to meta-oe and current meta-handheld master I get strange bitbake error while parsing:

OE qemux86-64@shr ~/shr-core $ bitbake mcnavi
Pseudo is not present but is required, building this first before the main build NOTE: Out of date cache found, rebuilding...
ERROR: Command execution failed: Exited with 1

                                                                     | ETA:

0:00:36 Summary: There were 0 ERROR messages shown, returning a non-zero
exit code.

IIRC someone reported same error message yesterday on IRC or ML.

Removing meta-handheld from bblayers.conf allows me to finish parsing and adding new meta-initramfs to bblayers.conf works too.

Maybe it's some require/include/inherit without corresponding file available, but for those it was showing reasonable error message before..