linux-yocto: consolidated pull request

PATCH Applied Bruce Ashfield 2 participants 5 messages Mar 5, 2012 – Mar 13, 2012

lore

Share & tools

lore

Bruce Ashfield

author

2012-03-05 04:10 UTC #0 lore raw

cover linux-yocto: consolidated pull request

Richard/Saul,

Here's the latest consolidated kernel pull request. The patches are as follows:

3/3 is the kernel updates:

- v3.0.23 stable update
- v3.2.9 stable update
- 3.0/3.2: fri2 updates (pch + configuration changes) from Darren Hart
- 3.0: pvr merge from Kishore Bodke
- linux-yocto/rt: update to 3.0.23-rt38
- linux-yocto/rt: update to 3.2.9-rt15

These have been built for all qemu targets, and built for the appropriate hardware platforms.

2/3 is the switch to use the 'bareclone' option that I had previously sent to be added to bitbake. Using this, the management of the linux-yocto branches in the build directory is much easier, and it removes the remaining restrictions around bare vs non-bare clones.

1/3 is linux-yocto: respect FILESPATH directories. This came from debugging the patching issues found with the linux-korg recipe. The solution (outside of re-writing the entire routine to python .. which I will do shortly) was to add a new routine that returns both the absolute patch source and the url's subdirectory. Using this all patches in WORKDIR, regardless of where they are on FILESPATH can be found. I tested linux-korg, and patching of all the kernels with this in place.

All three changes are isolated, so you can pick them up in any order that makes sense.

Cheers,

Bruce

cc Darren Hart <[email protected]>

cc Kishore Bodke <[email protected]>

The following changes since commit a439d32dd843d10a9f65cc858b02422fac7deb50:

soc-family.inc: to be included in machine.conf to add SOC_FAMILY to MACHINEOVERRIDE (2012-03-04 05:41:11 -0800)

are available in the git repository at:
git://git.pokylinux.org/poky-contrib zedd/kernel-oe
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel-oe

Bruce Ashfield (3):
linux-yocto: respect FILESPATH directories
linux-yocto: use bareclone option
linux-yocto: v3.2.9, v3.0.23 + fixes and updates

 meta/classes/kernel-yocto.bbclass                 |   30 ++++++++++++++++++---
 meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb   |   12 ++++----
 meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb   |   13 ++++-----
 meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb |   10 +++---
 meta/recipes-kernel/linux/linux-yocto_2.6.37.bb   |    4 +-
 meta/recipes-kernel/linux/linux-yocto_3.0.bb      |   20 +++++++-------
 meta/recipes-kernel/linux/linux-yocto_3.2.bb      |   21 +++++++-------
 7 files changed, 65 insertions(+), 45 deletions(-)

Signature · 1 line

1.7.4.1

Bruce Ashfield

author

2012-03-05 04:10 UTC #1 lore raw

PATCH 1/3 linux-yocto: respect FILESPATH directories

During the work to enhance the ability to specify out of tree kernel features, an assumption was made about PN being part of a patch path. This assumption is incorrect, since patches can be anywhere in the valid FILESPATH.

To make locating the patches in WORKDIR simple, we can just query patch.bbclass and return both the absolute directory of the patch and the subdirectory as it was specified on the src_uri.

Signed-off-by Bruce Ashfield <[email protected]>

---
 meta/classes/kernel-yocto.bbclass |   30 ++++++++++++++++++++++++++----
 1 files changed, 26 insertions(+), 4 deletions(-)

meta/classes/kernel-yocto.bbclass +26 -4

index 187e3cc..6bee84d 100644
@@ -1,6 +1,8 @@
 S = "${WORKDIR}/linux"
 
 
+# returns local (absolute) path names for all valid patches in the
+# src_uri
 def find_patches(d):
 	patches=src_patches(d)
 	patch_list=[]

@@ -10,6 +12,7 @@ def find_patches(d):
 
 	return patch_list
 
+# returns all the elements from the src uri that are .scc files
 def find_sccs(d):
 	sources=src_patches(d, True)
 	sources_list=[]

@@ -20,6 +23,22 @@ def find_sccs(d):
 
 	return sources_list
 
+# this is different from find_patches, in that it returns a colon separated
+# list of <patches>:<subdir> instead of just a list of patches
+def find_urls(d):
+	patches=src_patches(d)
+	fetch = bb.fetch2.Fetch([], d)
+	patch_list=[]
+	for p in patches:
+		_, _, local, _, _, _ = bb.decodeurl(p)
+		for url in fetch.urls:
+			urldata = fetch.ud[url]
+			if urldata.localpath == local:
+				patch_list.append(local+':'+urldata.path)
+
+        return patch_list
+
+
 do_patch() {
 	cd ${S}
 	if [ -f ${WORKDIR}/defconfig ]; then

@@ -51,8 +70,8 @@ do_patch() {
 		exit 1
 	fi
 
-	patches="${@" ".join(find_patches(d))}"
 	sccs="${@" ".join(find_sccs(d))}"
+	patches_and_dirs="${@" ".join(find_urls(d))}"
 
 	# This loops through all patches, and looks for directories that do
 	# not already have feature descriptions. If a directory doesn't have

@@ -66,14 +85,16 @@ do_patch() {
 	# to be repeated on the SRC_URI line .. which is more intutive
 	set +e
 	patch_dirs=
-	for p in ${patches}; do
+	for pp in ${patches_and_dirs}; do
+	        p=`echo $pp | cut -f1 -d:`
+		wp=`echo $pp | cut -f2 -d:`
 		pdir=`dirname ${p}`
 		pname=`basename ${p}`
 		scc=`find ${pdir} -maxdepth 1 -name '*.scc'`
 		if [ -z "${scc}" ]; then
 			# there is no scc file. We need to switch to someplace that we know
 		        # we can create content (the workdir)
-			workdir_subdir=`echo ${pdir} | sed "s%^.*/${PN}%%" | sed 's%^/%%'`
+			workdir_subdir=`dirname ${wp}`
 			suggested_dir="${WORKDIR}/${workdir_subdir}"
 			echo ${gen_feature_dirs} | grep -q ${suggested_dir}
 			if [ $? -ne 0 ]; then

@@ -82,7 +103,8 @@ do_patch() {
 			# we call the file *.scc_tmp, so the test above will continue to find
 			# that patches from a common subdirectory don't have a scc file and 
 			# they'll be placed in order, into this file. We'll rename it later.
-			echo "patch ${pname}" >> ${suggested_dir}/gen_${workdir_subdir}_desc.scc_tmp
+			gen_feature_name="gen_`echo ${workdir_subdir} | sed 's%/%%g'`_desc.scc_tmp"
+			echo "patch ${pname}" >> ${WORKDIR}/${workdir_subdir}/${gen_feature_name}
 		else
 			suggested_dir="${pdir}"
 		fi

Signature · 1 line

1.7.4.1

Bruce Ashfield

author

2012-03-05 04:10 UTC #2 lore raw

PATCH 2/3 linux-yocto: use bareclone option

In reply to Bruce Ashfield

Instead of specifying nocheckout=1, it provides a better workflow if the linux-yocto recipes use the new bareclone=1 option to get a mirrored copy of the source repository. This allows all local and remote branches to be available during the kernel build and development cycle.

Signed-off-by Bruce Ashfield <[email protected]>

---
 meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb   |    4 ++--
 meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb   |    4 ++--
 meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb |    4 ++--
 meta/recipes-kernel/linux/linux-yocto_2.6.37.bb   |    4 ++--
 meta/recipes-kernel/linux/linux-yocto_3.0.bb      |    4 ++--
 meta/recipes-kernel/linux/linux-yocto_3.2.bb      |    4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb +2 -2

index 8090535..8120300 100644
@@ -18,10 +18,10 @@ SRCREV_machine ?= "03705f7f066d83b4cd3a6088781d47e3b9e45b71"
 SRCREV_machine_qemuppc ?= "c8b184e8171f6f5a8017be4c5bf1e7a38c3f3002"
 SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
 
-PR = "r1"
+PR = "r2"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0.git;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0.git;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
 # Omit broken machines from COMPATIBLE_MACHINE
 #   qemuppc hangs at boot

meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb +2 -2

index bbb227f..e5db5df 100644
@@ -19,10 +19,10 @@ SRCREV_machine_qemuppc ?= "470deb222a704f84f3acf3a013a19d2da399d511"
 SRCREV_meta ?= "4c648bbbc7d2204d1b24f444aebb10f91c4ecae3"
 
 
-PR = "r0"
+PR = "r1"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.2.git;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.2.git;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
 # Omit broken machines from COMPATIBLE_MACHINE
 #   qemuppc hangs at boot

meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb +2 -2

index 32d502f..61706ea 100644
@@ -10,10 +10,10 @@ LINUX_VERSION ?= "3.0.22"
 SRCREV_machine ?= "c578f3a1f357142a6e02a1df4ae9aa16f45094d6"
 SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
 
-PR = "r1"
+PR = "r2"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta \
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta \
            file://core.cfg \
            file://serial.cfg \
            file://ext2.cfg \

meta/recipes-kernel/linux/linux-yocto_2.6.37.bb +2 -2

index 27c7558..d3da75c 100644
@@ -20,10 +20,10 @@ SRCREV_machine_qemux86-64 = "af2bfbe5f757361b5b027a24d67a93bfdfaaf33c"
 SRCREV_machine = "4ae8f8605c81c39b959948e23f7123294a5dfb3f"
 SRCREV_meta = "aeea99683c7283f1f3320bf2ee7085ee252d4e7e"
 
-PR = "r22"
+PR = "r23"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-2.6.37;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-2.6.37;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
 COMPATIBLE_MACHINE = "(qemuarm|qemux86|qemuppc|qemumips|qemux86-64)"

meta/recipes-kernel/linux/linux-yocto_3.0.bb +2 -2

index 58e1f6b..819bf70 100644
@@ -20,10 +20,10 @@ SRCREV_machine_qemux86-64 ?= "14fe1742198bd5a85fbcf6e53d336838ff87b2ef"
 SRCREV_machine ?= "c578f3a1f357142a6e02a1df4ae9aa16f45094d6"
 SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
 
-PR = "r3"
+PR = "r4"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.0;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
 COMPATIBLE_MACHINE = "(qemuarm|qemux86|qemuppc|qemumips|qemux86-64)"

meta/recipes-kernel/linux/linux-yocto_3.2.bb +2 -2

index ecde039..bad6f5e 100644
@@ -26,10 +26,10 @@ SRCREV_machine_qemux86-64 ?= "f54af84c64408a0259a919d1fd2405c0115c0a0b"
 SRCREV_machine ?= "21ab5dca134a6bf1316aa59f69f9ee9e091d5702"
 SRCREV_meta ?= "4c648bbbc7d2204d1b24f444aebb10f91c4ecae3"
 
-PR = "r0"
+PR = "r1"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.2;protocol=git;nocheckout=1;branch=${KBRANCH},meta;name=machine,meta"
+SRC_URI = "git://git.yoctoproject.org/linux-yocto-3.2;protocol=git;bareclone=1;branch=${KBRANCH},meta;name=machine,meta"
 
 COMPATIBLE_MACHINE = "(qemuarm|qemux86|qemuppc|qemumips|qemux86-64)"

Signature · 1 line

1.7.4.1

Bruce Ashfield

author

2012-03-05 04:10 UTC #3 lore raw

PATCH 3/3 linux-yocto: v3.2.9, v3.0.23 + fixes and updates

In reply to Bruce Ashfield

This is an update of the linux-yocto 3.0 and 3.2 SRCREVs to bring in the following updates:

These have been built for all qemu targets, and built for the appropriate hardware platforms.

Signed-off-by Bruce Ashfield <[email protected]>

---
 meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb   |    8 ++++----
 meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb   |    9 ++++-----
 meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb |    6 +++---
 meta/recipes-kernel/linux/linux-yocto_3.0.bb      |   18 +++++++++---------
 meta/recipes-kernel/linux/linux-yocto_3.2.bb      |   19 +++++++++----------
 5 files changed, 29 insertions(+), 31 deletions(-)

meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb +4 -4

index 8120300..e944416 100644
@@ -11,12 +11,12 @@ KMACHINE_qemumips = "mti-malta32-be"
 KBRANCH = "yocto/standard/preempt-rt/base"
 KBRANCH_qemuppc = "yocto/standard/preempt-rt/qemu-ppc32"
 
-LINUX_VERSION ?= "3.0.22"
+LINUX_VERSION ?= "3.0.23"
 LINUX_KERNEL_TYPE = "preempt-rt"
 
-SRCREV_machine ?= "03705f7f066d83b4cd3a6088781d47e3b9e45b71"
-SRCREV_machine_qemuppc ?= "c8b184e8171f6f5a8017be4c5bf1e7a38c3f3002"
-SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
+SRCREV_machine ?= "49d1d57f98a9ac378a1f12f5d23301c11495a5df"
+SRCREV_machine_qemuppc ?= "7b3162e269c49c6a4653d43292c62c188add8d67"
+SRCREV_meta ?= "e559129b4a6f39f68b75141096b2d516cf7a7f35"
 
 PR = "r2"
 PV = "${LINUX_VERSION}+git${SRCPV}"

meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb +4 -5

index e5db5df..efb1bc9 100644
@@ -11,13 +11,12 @@ KMACHINE_qemumips = "mti-malta32-be"
 KBRANCH = "standard/preempt-rt/base"
 KBRANCH_qemuppc = "standard/preempt-rt/qemu-ppc32"
 
-LINUX_VERSION ?= "3.2.8"
+LINUX_VERSION ?= "3.2.9"
 LINUX_KERNEL_TYPE = "preempt-rt"
 
-SRCREV_machine ?= "6ab03c43328172425a6f632bff694a8da6c99f0e"
-SRCREV_machine_qemuppc ?= "470deb222a704f84f3acf3a013a19d2da399d511"
-SRCREV_meta ?= "4c648bbbc7d2204d1b24f444aebb10f91c4ecae3"
-
+SRCREV_machine ?= "3652b606f1ab7769a7ecc86c70d22db4ef99fb2a"
+SRCREV_machine_qemuppc ?= "0c8f5214bc15699b41369751cdecea45f717c79c"
+SRCREV_meta ?= "fa83c7b0b47d1aa3e25594ddbcd125a1108d3aaa"
 
 PR = "r1"
 PV = "${LINUX_VERSION}+git${SRCPV}"

meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb +3 -3

index 61706ea..5cad513 100644
@@ -5,10 +5,10 @@ require recipes-kernel/linux/linux-yocto.inc
 KMACHINE = "yocto/standard/base"
 KBRANCH = "${KMACHINE}"
 
-LINUX_VERSION ?= "3.0.22"
+LINUX_VERSION ?= "3.0.23"
 
-SRCREV_machine ?= "c578f3a1f357142a6e02a1df4ae9aa16f45094d6"
-SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
+SRCREV_machine ?= "8fd24b3570ab995848e4123ef13bac64e2c924be"
+SRCREV_meta ?= "e559129b4a6f39f68b75141096b2d516cf7a7f35"
 
 PR = "r2"
 PV = "${LINUX_VERSION}+git${SRCPV}"

meta/recipes-kernel/linux/linux-yocto_3.0.bb +9 -9

index 819bf70..d76bac8 100644
@@ -10,15 +10,15 @@ KMACHINE_qemuarm  = "yocto/standard/arm-versatile-926ejs"
 
 KBRANCH = "${KMACHINE}"
 
-LINUX_VERSION ?= "3.0.22"
-
-SRCREV_machine_qemuarm ?= "6d4d3334bf648b97a0d44b7833060f4da40840d5"
-SRCREV_machine_qemumips ?= "1d8d58d120c92510be8a97b0ed493a25a3010d6c"
-SRCREV_machine_qemuppc ?= "804aff4612bb7a53ac4679412c2a78bc06e3c4ce"
-SRCREV_machine_qemux86 ?= "7b0476fde681e828417d8fa86c47b0ca539ade70"
-SRCREV_machine_qemux86-64 ?= "14fe1742198bd5a85fbcf6e53d336838ff87b2ef"
-SRCREV_machine ?= "c578f3a1f357142a6e02a1df4ae9aa16f45094d6"
-SRCREV_meta ?= "d7b46785d6781e2c23d754f35f09bebd3b74b5bb"
+LINUX_VERSION ?= "3.0.23"
+
+SRCREV_machine_qemuarm ?= "927c56dcc7dc9199923a86cc0dac741b6b080953"
+SRCREV_machine_qemumips ?= "b1f7eb611a30a46692c11ea1164d17f0d44e911b"
+SRCREV_machine_qemuppc ?= "16f1ebf66ce2b58cbfc0ff7c8883c91c883e216a"
+SRCREV_machine_qemux86 ?= "bc2cb6560d3dedf8337b5df8228a6e8002b6a98c"
+SRCREV_machine_qemux86-64 ?= "b9cbe895ce0c259b4684355ea1602402b2653ca5"
+SRCREV_machine ?= "8fd24b3570ab995848e4123ef13bac64e2c924be"
+SRCREV_meta ?= "e559129b4a6f39f68b75141096b2d516cf7a7f35"
 
 PR = "r4"
 PV = "${LINUX_VERSION}+git${SRCPV}"

meta/recipes-kernel/linux/linux-yocto_3.2.bb +9 ~~-10~~

index bad6f5e..2d2542a 100644
@@ -15,16 +15,15 @@ KBRANCH_qemuppc  = "standard/default/qemu-ppc32"
 KBRANCH_qemumips = "standard/default/mti-malta32-be"
 KBRANCH_qemuarm  = "standard/default/arm-versatile-926ejs"
 
-LINUX_VERSION ?= "3.2.8"
-
-
-SRCREV_machine_qemuarm ?= "2fdc18ce2b9bf95519a02640cb45930ae7587dd4"
-SRCREV_machine_qemumips ?= "2b2a6bad57fe403f1180c4b9021210da87d02c20"
-SRCREV_machine_qemuppc ?= "eabeabc4c8a17822772895d3ba22989ae18a58c3"
-SRCREV_machine_qemux86 ?= "ea5bd45e564520ca4ecdb10f7af63263d5fe33f7"
-SRCREV_machine_qemux86-64 ?= "f54af84c64408a0259a919d1fd2405c0115c0a0b"
-SRCREV_machine ?= "21ab5dca134a6bf1316aa59f69f9ee9e091d5702"
-SRCREV_meta ?= "4c648bbbc7d2204d1b24f444aebb10f91c4ecae3"
+LINUX_VERSION ?= "3.2.9"
+
+SRCREV_machine_qemuarm ?= "a4d4d3dd9a69611bd1915626d1f2e9f2b1571b39"
+SRCREV_machine_qemumips ?= "79a0a4c9872ebc70af688f9b09f6be4e4d2249e0"
+SRCREV_machine_qemuppc ?= "74364f1062a219eb242d7cb300a404516c297601"
+SRCREV_machine_qemux86 ?= "ea0a62d6821aede782c2b9457639f1ca7f2ddc07"
+SRCREV_machine_qemux86-64 ?= "626165edf65281d9b933a6129e935c7a73ab63a7"
+SRCREV_machine ?= "6f164ae4ef5aeec2bef40a1b936ac1f9b9db46ba"
+SRCREV_meta ?= "fa83c7b0b47d1aa3e25594ddbcd125a1108d3aaa"
 
 PR = "r1"
 PV = "${LINUX_VERSION}+git${SRCPV}"

Signature · 1 line

1.7.4.1

Saul Wold

Applied

2012-03-13 16:03 UTC #4 lore raw

In reply to Bruce Ashfield

Quoted 51 lines · Bruce Ashfield

Richard/Saul,
Here's the latest consolidated kernel pull request. The patches are as follows:
3/3 is the kernel updates:
- v3.0.23 stable update
- v3.2.9 stable update
- 3.0/3.2: fri2 updates (pch + configuration changes) from Darren Hart
- 3.0: pvr merge from Kishore Bodke
- linux-yocto/rt: update to 3.0.23-rt38
- linux-yocto/rt: update to 3.2.9-rt15
These have been built for all qemu targets, and built for the appropriate hardware platforms.
2/3 is the switch to use the 'bareclone' option that I had previously sent to be added to bitbake. Using this, the management of the linux-yocto branches in the build directory is much easier, and it removes the remaining restrictions around bare vs non-bare clones.
1/3 is linux-yocto: respect FILESPATH directories. This came from debugging the patching issues found with the linux-korg recipe. The solution (outside of re-writing the entire routine to python .. which I will do shortly) was to add a new routine that returns both the absolute patch source and the url's subdirectory. Using this all patches in WORKDIR, regardless of where they are on FILESPATH can be found. I tested linux-korg, and patching of all the kernels with this in place.
All three changes are isolated, so you can pick them up in any order that makes sense.
Cheers,
Bruce
cc Darren Hart<[email protected]>
cc Kishore Bodke<[email protected]>
The following changes since commit a439d32dd843d10a9f65cc858b02422fac7deb50:
   soc-family.inc: to be included in machine.conf to add SOC_FAMILY to MACHINEOVERRIDE (2012-03-04 05:41:11 -0800)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib zedd/kernel-oe
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=zedd/kernel-oe
Bruce Ashfield (3):
linux-yocto: respect FILESPATH directories
linux-yocto: use bareclone option
linux-yocto: v3.2.9, v3.0.23 + fixes and updates

Quoted 9 lines

  meta/classes/kernel-yocto.bbclass                 |   30 ++++++++++++++++++---
  meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb   |   12 ++++----
  meta/recipes-kernel/linux/linux-yocto-rt_3.2.bb   |   13 ++++-----
  meta/recipes-kernel/linux/linux-yocto-tiny_3.0.bb |   10 +++---
  meta/recipes-kernel/linux/linux-yocto_2.6.37.bb   |    4 +-
  meta/recipes-kernel/linux/linux-yocto_3.0.bb      |   20 +++++++-------
  meta/recipes-kernel/linux/linux-yocto_3.2.bb      |   21 +++++++-------
  7 files changed, 65 insertions(+), 45 deletions(-)

Merged into OE-Core

Thanks
Sau!