Patches from the Debian policycoreutils package
cover Patches from the Debian policycoreutils package
Hi,
Please find here the patches that Russell Coker has applied to the debian policycoreutils Debian package.
Could you please merge them.
Cheers
Laurent Bigonville
Laurent Bigonville (1):
Remove policycoreutils/run_init/open_init_pty.c
Russell Coker (2):
Patch for mcstrans to not abort when it sees a squeeze config file Add new open_init_pty that doesn't waste CPU time
policycoreutils/mcstrans/src/mcstrans.c | 7 + policycoreutils/run_init/Makefile | 11 +- policycoreutils/run_init/open_init_pty.c | 399 -------------------------- policycoreutils/run_init/open_init_pty.cpp | 423 ++++++++++++++++++++++++++++ 4 files changed, 436 insertions(+), 404 deletions(-) delete mode 100644 policycoreutils/run_init/open_init_pty.c create mode 100644 policycoreutils/run_init/open_init_pty.cpp
Signature · 7 lines
1.7.10 -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
PATCH 1/3 Patch for mcstrans to not abort when it sees a squeeze config file
From: Russell Coker <[email protected]>
--- policycoreutils/mcstrans/src/mcstrans.c | 7 +++++++ 1 file changed, 7 insertions(+)
policycoreutils/mcstrans/src/mcstrans.c +7 -0
@@ -745,6 +745,13 @@ process_trans(char *buffer) {if (*buffer ==0 )return 0 ; +/* special case for old format */ +if (!strcmp ("s0=" , buffer)) + { +syslog (LOG_ERR ,"Ignoring old format line \"s0=\"." ); +return 0 ; + } +char *delim =strpbrk (buffer,"=!>" );if (! delim) {syslog (LOG_ERR ,"invalid line (no !, = or >) %d" , lineno);
Signature · 7 lines
1.7.10 -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
PATCH 2/3 Add new open_init_pty that doesn't waste CPU time
In reply to Laurent BigonvilleFrom: Russell Coker <[email protected]>
--- policycoreutils/run_init/Makefile | 11 +- policycoreutils/run_init/open_init_pty.cpp | 423 ++++++++++++++++++++++++++++ 2 files changed, 429 insertions(+), 5 deletions(-) create mode 100644 policycoreutils/run_init/open_init_pty.cpp
policycoreutils/run_init/Makefile +6 -5
@@ -8,8 +8,9 @@ LOCALEDIR ?= /usr/share/locale PAMH = $(shell ls /usr/include/security/pam_appl.h 2>/dev/null) AUDITH = $(shell ls /usr/include/libaudit.h 2>/dev/null) -CFLAGS ?= -Werror -Wall -W +CFLAGS ?= -Werror -Wall -W -g -O2 override CFLAGS += -I$(PREFIX)/include -DUSE_NLS -DLOCALEDIR="\"$(LOCALEDIR)\"" -DPACKAGE="\"policycoreutils\"" +CPPFLAGS ?= $(CFLAGS) LDLIBS += -lselinux -L$(PREFIX)/lib ifeq ($(PAMH), /usr/include/security/pam_appl.h) override CFLAGS += -DUSE_PAM
@@ -23,17 +24,17 @@ ifeq ($(AUDITH), /usr/include/libaudit.h) LDLIBS += -laudit endif -TARGETS=$(patsubst %.c,%,$(wildcard *.c)) +TARGETS=open_init_pty run_init all: $(TARGETS) -open_init_pty: open_init_pty.c - $(LINK.c) $^ -ldl -lutil -o $@ +open_init_pty: open_init_pty.cpp + $(LINK.cpp) $^ -ldl -lutil -o $@ install: all test -d $(SBINDIR) || install -m 755 -d $(SBINDIR) - test -d $(MANDIR)/man1 || install -m 755 -d $(MANDIR)/man1 + test -d $(MANDIR)/man8 || install -m 755 -d $(MANDIR)/man8 install -m 755 run_init $(SBINDIR) install -m 755 open_init_pty $(SBINDIR) install -m 644 run_init.8 $(MANDIR)/man8/
policycoreutils/run_init/open_init_pty.cpp new file +423 -0
423 lines not on this page · raw message
Signature · 7 lines
1.7.10 -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
PATCH 3/3 Remove policycoreutils/run_init/open_init_pty.c
In reply to Laurent BigonvilleFrom: Laurent Bigonville <[email protected]>
--- policycoreutils/run_init/open_init_pty.c | 399 ------------------------------ 1 file changed, 399 deletions(-) delete mode 100644 policycoreutils/run_init/open_init_pty.c
policycoreutils/run_init/open_init_pty.c deleted +0 -399
@@ -1,399 +0,0 @@ -/* -*- Mode: C -*- -* open_init_pty.c --- -* Author : Manoj Srivastava ( [email protected] ) -* Created On : Fri Jan 14 10:48:28 2005 -* Created On Node : glaurung.internal.golden-gryphon.com -* Last Modified By : Manoj Srivastava -* Last Modified On : Thu Sep 15 00:57:00 2005 -* Last Machine Used: glaurung.internal.golden-gryphon.com -* Update Count : 92 -* Status : Unknown, Use with caution! -* HISTORY : -* Description : -* -* Distributed under the terms of the GNU General Public License v2 -* -* open_init_pty -* -* SYNOPSIS: -* -* This program allows a systems administrator to execute daemons -* which need to work in the initrc domain, and which need to have -* pty's as system_u:system_r:initrc_t -* -* USAGE: -* -* * arch-tag: a5583d39-72b9-4cdf-ba1b-5678ea4cbe20 -*/ - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <signal.h> -#include <errno.h> - -#include <sysexits.h> - -#include <pty.h> /* for openpty and forkpty */ -#include <utmp.h> /* for login_tty */ -#include <termios.h> -#include <fcntl.h> - -#include <sys/select.h> - -static struct termios saved_termios; -static int saved_fd =-1 ; -static enum {RESET ,RAW ,CBREAK } tty_state =RESET ; - -static int tty_semi_raw (int fd) -{ -struct termios buf; - -if (tty_state ==RESET ) { -if (tcgetattr (fd, &saved_termios) <0 ) { -return -1 ; - } - } - - buf = saved_termios; -/* -* echo off, canonical mode off, extended input processing off, -* signal chars off -*/ - buf.c_lflag &= ~(ECHO |ICANON |IEXTEN |ISIG ); -/* -* no SIGINT on break, CR-to-NL off, input parity check off, do not -* strip 8th bit on input,output flow control off -*/ - buf.c_iflag &= ~(BRKINT |ICRNL |INPCK |ISTRIP |IXON ); -/* Clear size bits, parity checking off */ - buf.c_cflag &= ~(CSIZE |PARENB ); -/* set 8 bits/char */ - buf.c_cflag |=CS8 ; -/* Output processing off -buf.c_oflag &= ~(OPOST); */ - - buf.c_cc[VMIN ] =1 ;/* one byte at a time, no timer */ - buf.c_cc[VTIME ] =0 ; -if (tcsetattr (fd,TCSANOW , &buf) <0 ) { -return -1 ; - }/* end of if(tcsetattr(fileno(stdin), TCSANOW, &buf) < 0) */ - tty_state =RAW ; - saved_fd = fd; -return 0 ; -} - -void tty_atexit (void ) -{ -if (tty_state !=CBREAK && tty_state !=RAW ) { -return ; - } - -if (tcsetattr (saved_fd,TCSANOW , &saved_termios) <0 ) { -return ; - }/* end of if(tcsetattr(fileno(stdin), TCSANOW, &buf) < 0) */ - tty_state =RESET ; -return ; -} - -int main (int argc,char *argv[]) -{ -pid_t child_pid; -struct termios tty_attr; -struct winsize window_size; -int pty_master; -int retval =0 ; - -/* for select */ -fd_set readfds; -fd_set writefds; -fd_set exceptfds; - -int err_count =0 ; - -/* for sigtimedwait() */ -struct timespec timeout; -char buf[16384 ]; - -if (argc ==1 ) { -printf ("usage: %s PROGRAM [ARGS]...\n" , argv[0 ]); -exit (1 ); - } - -sigset_t signal_set; -siginfo_t signalinfo; - -/* set up SIGCHLD */ -sigemptyset (&signal_set);/* no signals */ -sigaddset (&signal_set,SIGCHLD );/* Add sig child */ -sigprocmask (SIG_BLOCK , &signal_set,NULL );/* Block the signal */ - -/* Set both to 0, so sigtimed wait just does a poll */ - timeout.tv_sec =0 ; - timeout.tv_nsec =0 ; - -if (isatty (fileno (stdin))) { -/* get terminal parameters associated with stdout */ -if (tcgetattr (fileno (stdout), &tty_attr) <0 ) { -perror ("tcgetattr:" ); -exit (EX_OSERR ); - } - -/* end of if(tcsetattr(&tty_attr)) */ -/* get window size */ -if (ioctl (fileno (stdout),TIOCGWINSZ , &window_size) <0 ) { -perror ("ioctl stdout:" ); -exit (1 ); - } - - child_pid =forkpty (&pty_master,NULL , &tty_attr, &window_size); - }/* end of if(isatty(fileno(stdin))) */ -else {/* not interactive */ - child_pid =forkpty (&pty_master,NULL ,NULL ,NULL ); - } - -if (child_pid <0 ) { -perror ("forkpty():" ); -fflush (stdout); -fflush (stderr); -exit (EX_OSERR ); - }/* end of if(child_pid < 0) */ -if (child_pid ==0 ) { -/* in the child */ -struct termios s_tty_attr; -if (tcgetattr (fileno (stdin), &s_tty_attr)) { -perror ("Child:" ); -fflush (stdout); -fflush (stderr); -exit (EXIT_FAILURE ); - } -/* Turn off echo */ - s_tty_attr.c_lflag &= ~(ECHO |ECHOE |ECHOK |ECHONL ); -/* Also turn of NL to CR?LF on output */ - s_tty_attr.c_oflag &= ~(ONLCR ); -if (tcsetattr (fileno (stdin),TCSANOW , &s_tty_attr)) { -perror ("Child:" ); -exit (EXIT_FAILURE ); - } - {/* There is no reason to block sigchild for the process we -shall exec here */ -sigset_t chld_signal_set; -/* release SIGCHLD */ -sigemptyset (&chld_signal_set);/* no signals */ -sigaddset (&chld_signal_set,SIGCHLD );/* Add sig child */ -sigprocmask (SIG_UNBLOCK , &chld_signal_set,NULL );/* Unblock the signal */ - } - -if (execvp (argv[1 ], argv +1 )) { -perror ("Exec:" ); -fflush (stdout); -fflush (stderr); -exit (EXIT_FAILURE ); - } - } - -/* end of if(child_pid == 0) */ -/* -* OK. Prepare to handle IO from the child. We need to transfer -* everything from the child's stdout to ours. -*/ -FD_ZERO (&readfds); -FD_ZERO (&writefds); -FD_ZERO (&exceptfds); - -/* -* Read current file descriptor flags, preparing to do non blocking reads -*/ - retval =fcntl (pty_master,F_GETFL ); -if (retval <0 ) { -perror ("fcntl_get" ); -fflush (stdout); -fflush (stderr); -exit (EX_IOERR ); - } - -/* Set the connection to be non-blocking */ -if (fcntl (pty_master,F_SETFL , retval |O_NONBLOCK ) <0 ) { -perror ("fcnt_setFlag_nonblock:" ); -fflush (stdout); -fflush (stderr); -exit (1 ); - } - -FD_SET (pty_master, &readfds); -FD_SET (pty_master, &writefds); -FD_SET (fileno (stdin), &readfds); -if (isatty (fileno (stdin))) { -if (tty_semi_raw (fileno (stdin)) <0 ) { -perror ("Error: settingraw mode:" ); -fflush (stdout); -fflush (stderr); - }/* end of if(tty_raw(fileno(stdin)) < 0) */ -if (atexit (tty_atexit) <0 ) { -perror ("Atexit setup:" ); -fflush (stdout); -fflush (stderr); - }/* end of if(atexit(tty_atexit) < 0) */ - } - -/* ignore return from nice, but lower our priority */ - int ignore __attribute__ ((unused)) = nice(19); - -/* while no signal, we loop around */ - int done = 0; -while (!done) { -struct timeval interval; -fd_set t_readfds; -fd_set t_writefds; -fd_set t_exceptfds; -/* -* We still use a blocked signal, and check for SIGCHLD every -* loop, since waiting infinitely did not really help the load -* when running, say, top. -*/ - interval.tv_sec =0 ; - interval.tv_usec =200000 ;/* so, check for signals every 200 milli -seconds */ - - t_readfds = readfds; - t_writefds = writefds; - t_exceptfds = exceptfds; - -/* check for the signal */ - retval =sigtimedwait (&signal_set, &signalinfo, &timeout); - -if (retval ==SIGCHLD ) { -/* child terminated */ - done =1 ;/* in case they do not close off their -file descriptors */ - }else { -if (retval <0 ) { -if (errno !=EAGAIN ) { -perror ("sigtimedwait" ); -fflush (stdout); -fflush (stderr); -exit (EX_IOERR ); - }else { -/* No signal in set was delivered within the timeout period specified */ - } - } - }/* end of else */ - -if (select - (pty_master +1 , &t_readfds, &t_writefds, &t_exceptfds, - &interval) <0 ) { -perror ("Select:" ); -fflush (stdout); -fflush (stderr); -exit (EX_IOERR ); - } - -if (FD_ISSET (pty_master, &t_readfds)) { - retval =read (pty_master, buf, (unsigned int )16384 ); -if (retval <0 ) { -if (errno !=EINTR && errno !=EAGAIN ) {/* Nothing left to read? */ -fflush (stdout); -fflush (stderr); -/* fprintf(stderr, "DEBUG: %d: Nothing left to read?\n", __LINE__); */ -exit (EXIT_SUCCESS ); - }/* end of else */ - }/* end of if(retval < 0) */ -else { -if (retval ==0 ) { -if (++err_count >5 ) {/* child closed connection */ -fflush (stdout); -fflush (stderr); -/*fprintf(stderr, "DEBUG: %d: child closed connection?\n", __LINE__); */ -exit (EXIT_SUCCESS ); - } - }/* end of if(retval == 0) */ -else { -ssize_t nleft = retval; -ssize_t nwritten =0 ; -char *ptr = buf; -while (nleft >0 ) { -if ((nwritten = -write (fileno (stdout), ptr, - (unsigned int )nleft)) - <=0 ) { -if (errno ==EINTR ) { - nwritten =0 ; - }/* end of if(errno == EINTR) */ -else { -perror ("write" ); -fflush (stdout); -fflush (stderr); -exit (EXIT_SUCCESS ); - }/* end of else */ - }/* end of if((nwritten = write(sockfd, ptr, nleft)) <= 0) */ - nleft -= nwritten; - ptr += nwritten; - }/* end of while(nleft > 0) */ - -/* fprintf(stderr, "DEBUG: %d: wrote %d\n", __LINE__, retval); */ -fflush (stdout); - }/* end of else */ - }/* end of else */ - } -if (FD_ISSET (fileno (stdin), &t_readfds)) { -if (FD_ISSET (pty_master, &t_writefds)) { - retval = -read (fileno (stdin), buf, - (unsigned int )16384 ); -if (retval <0 ) { -if (errno !=EINTR && errno !=EAGAIN ) {/* Nothing left to read? */ -fflush (stdout); -fflush (stderr); -exit (EXIT_SUCCESS ); - }/* end of else */ - }/* end of if(retval < 0) */ -else { -if (retval ==0 ) { -if (++err_count >5 ) {/* lost controlling tty */ -fflush (stdout); -fflush (stderr); -exit (EXIT_SUCCESS ); - } - }/* end of if(retval == 0) */ -else { -ssize_t nleft = retval; -ssize_t nwritten =0 ; -char *ptr = buf; -while (nleft >0 ) { -if ((nwritten = -write (pty_master, - ptr, - (unsigned -int )nleft)) - <=0 ) { -if (errno == -EINTR ) { - nwritten - =0 ; - }/* end of if(errno == EINTR) */ -else { -perror - ("write" ); -fflush - (stdout); -fflush - (stderr); -exit (EXIT_SUCCESS ); - }/* end of else */ - }/* end of if((nwritten = write(sockfd, ptr, nleft)) <= 0) */ - nleft -= nwritten; - ptr += nwritten; - }/* end of while(nleft > 0) */ - -fflush (stdout); - }/* end of else */ - }/* end of else */ - }/* end of if(FD_ISSET(pty_master, &writefds)) */ - }/* something to read on stdin */ - }/* Loop */ - -fflush (stdout); -fflush (stderr); - -exit (EXIT_SUCCESS ); -}/* end of main() */
Signature · 7 lines
1.7.10 -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.