Skip to contentSkip to conversation

tune-ppc476.inc: support ppc476

PATCH Applied Peter Seebach 3 participants 4 messages Jul 16, 2012 – Jul 19, 2012

lore
Share & tools
lore
#0 lore raw

cover tune-ppc476.inc: support ppc476

One of the BSPs we support uses a 476-family chip, so we have a tuning for it in our custom toolchain layer. Sending a tuning upstream too because someone else might want it. Has been lightly tested with the oe-core toolchain; it at least allows compiles.

The following changes since commit 20405bdab18b7a2b101f818e72863d289d5945e4:
Bruce Ashfield (1):
linux-yocto/3.0: perf scripting support

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib seebs/ppc476
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=seebs/ppc476

Peter Seebach (1):
tune-ppc476.inc: Support ppc476

 meta/conf/machine/include/tune-ppc476.inc |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
 create mode 100644 meta/conf/machine/include/tune-ppc476.inc
#1 lore raw

PATCH 1/1 tune-ppc476.inc: Support ppc476

A couple of boards use chips which perform noticably better when optimized for the 476. Add a trivial tune file to let them run better.

---
 meta/conf/machine/include/tune-ppc476.inc |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
 create mode 100644 meta/conf/machine/include/tune-ppc476.inc
meta/conf/machine/include/tune-ppc476.inc new file +14 -0
new file mode 100644
index 0000000..5d10261
@@ -0,0 +1,14 @@
+DEFAULTTUNE ?= "ppc476"
+
+require conf/machine/include/powerpc/arch-powerpc.inc
+
+TUNEVALID[ppc476] = "Enable ppc476 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "ppc476", "-mcpu=476", "", d)}"
+
+AVAILTUNES += "ppc476"
+TUNE_FEATURES_tune-ppc476 = "m32 fpu-hard ppc476"
+TUNE_PKGARCH_tune-ppc476 = "ppc476"
+PACKAGE_EXTRA_ARCHS_tune-ppc476 = "${PACKAGE_EXTRA_ARCHS_tune-powerpc} ppc476"
+
+# glibc configure options to get 476 specific library (for sqrt)
+GLIBC_EXTRA_OECONF += "${@bb.utils.contains("TUNE_FEATURES", "ppc476", "-with-cpu=476", "", d)}"
Signature · 1 line
1.7.0.4
#2 lore raw

Re: [PATCH 1/1] tune-ppc476.inc: Support ppc476

Quoted 1 line · Peter Seebach

+GLIBC_EXTRA_OECONF += "${@bb.utils.contains("TUNE_FEATURES", "ppc476", "-with-cpu=476", "", d)}"

have you built an OE internal toolchain with this successfully.?

Applied
#3 lore raw
In reply to Peter Seebach
Quoted 19 lines · Peter Seebach

One of the BSPs we support uses a 476-family chip, so we have a tuning for it in our custom toolchain layer. Sending a tuning upstream too because someone else might want it. Has been lightly tested with the oe-core toolchain; it at least allows compiles.

The following changes since commit 20405bdab18b7a2b101f818e72863d289d5945e4:
Bruce Ashfield (1):
linux-yocto/3.0: perf scripting support

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib seebs/ppc476
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=seebs/ppc476

Peter Seebach (1):

   tune-ppc476.inc: Support ppc476
  meta/conf/machine/include/tune-ppc476.inc |   14 ++++++++++++++
  1 files changed, 14 insertions(+), 0 deletions(-)
Quoted 9 lines

create mode 100644 meta/conf/machine/include/tune-ppc476.inc

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core

Merged into OE-Core

Thanks
Sau!