Skip to contentSkip to conversation

hybrid systemd/sysvinit

RFC PATCH In review Ross Burton 7 participants 30 messages Mar 11, 2013 – Mar 19, 2013

lore
Share & tools
lore
#0 lore raw

cover hybrid systemd/sysvinit

Hi,

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

The init manager used at image construction time is DISTRO_FEATURES_INITMAN (maybe this should be renamed) and that value is also backfilled into DISTRO_FEATURES.

The key change is that systemd.bbclass only recommends systemd, and will check that there's a systemctl binary before calling it - this allows packages built like this to be installed on a systemd-free image.

This is very much a RFC, I've done some basic testing but between illness and having to prepare for a presentation at this conference I've not been able to test it as much as I'd hoped. Review and testing very much appreciated.

Some metrics: adding the systemd feature but still using sysvinit when building the image results in just libsystemd-daemon and the service files being added to the image, with a negliable size increase.

Ross

The following changes since commit 1fd5b960dd36458b7b829f9094df18cd8b5ac201:

systemd: remove libsystemd-daemon linkage in libudev (2013-03-11 10:59:54 -0700)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib ross/systemd

for you to fetch changes up to ba7c15ae47ace8a15d97b4c58d2aa5b2ebb4c47a:

default-distrovars: don't add DISTRO_FEATURES_INITMAN to DISTRO_FEATURES (2013-03-11 12:17:49 -0700)

----------------------------------------------------------------
Radu Moisan (1):
busybox: add systemd enabling for syslog and klogd

Ross Burton (8):
systemd: merge udev-systemd into udev
systemd: make xz support (compressed journal) optional
default-providers: change udev selection logic update-rcd.bbclass: handle both sysvinit and systemd features being present
systemd: allow postinsts to run without systemd being present
systemd: add udev init script for hybrid sysvinit/systemd usage update-rc.d/systemd: change communication variable name
default-distrovars: don't add DISTRO_FEATURES_INITMAN to DISTRO_FEATURES

 meta/classes/systemd.bbclass                       |   37 ++++---
 meta/classes/update-rc.d.bbclass                   |    7 +-
 meta/conf/distro/include/default-distrovars.inc    |    2 +-
 meta/conf/distro/include/default-providers.inc     |    2 +-
 meta/recipes-core/busybox/busybox.inc              |   17 +++-
 meta/recipes-core/busybox/busybox_1.20.2.bb        |    2 +
 .../busybox/files/busybox-klogd.service.in         |    8 ++
 .../busybox/files/busybox-syslog.service.in        |   13 +++
 .../packagegroups/packagegroup-core-boot.bb        |    4 +-
 meta/recipes-core/systemd/systemd/init             |  101 ++++++++++++++++++++
 meta/recipes-core/systemd/systemd_197.bb           |   26 +++--
 11 files changed, 184 insertions(+), 35 deletions(-)
 create mode 100644 meta/recipes-core/busybox/files/busybox-klogd.service.in
 create mode 100644 meta/recipes-core/busybox/files/busybox-syslog.service.in
 create mode 100644 meta/recipes-core/systemd/systemd/init

Radu Moisan (1):
busybox: add systemd enabling for syslog and klogd

Ross Burton (8):
systemd: merge udev-systemd into udev
systemd: make xz support (compressed journal) optional
default-providers: change udev selection logic update-rcd.bbclass: handle both sysvinit and systemd features being
present
systemd: allow postinsts to run without systemd being present
systemd: add udev init script for hybrid sysvinit/systemd usage update-rc.d/systemd: change communication variable name
default-distrovars: don't add DISTRO_FEATURES_INITMAN to
DISTRO_FEATURES

 meta/classes/systemd.bbclass                       |   37 ++++---
 meta/classes/update-rc.d.bbclass                   |    7 +-
 meta/conf/distro/include/default-distrovars.inc    |    2 +-
 meta/conf/distro/include/default-providers.inc     |    2 +-
 meta/recipes-core/busybox/busybox.inc              |   17 +++-
 meta/recipes-core/busybox/busybox_1.20.2.bb        |    2 +
 .../busybox/files/busybox-klogd.service.in         |    8 ++
 .../busybox/files/busybox-syslog.service.in        |   13 +++
 .../packagegroups/packagegroup-core-boot.bb        |    4 +-
 meta/recipes-core/systemd/systemd/init             |  101 ++++++++++++++++++++
 meta/recipes-core/systemd/systemd_197.bb           |   26 +++--
 11 files changed, 184 insertions(+), 35 deletions(-)
 create mode 100644 meta/recipes-core/busybox/files/busybox-klogd.service.in
 create mode 100644 meta/recipes-core/busybox/files/busybox-syslog.service.in
 create mode 100644 meta/recipes-core/systemd/systemd/init
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/9 systemd: merge udev-systemd into udev

Merge the contents of udev-systemd, which is just the service files, into udev itself.

---
 meta/recipes-core/systemd/systemd_197.bb |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
meta/recipes-core/systemd/systemd_197.bb +4 -5
index 5180eef..962b120 100644
@@ -171,7 +171,7 @@ FILES_${PN} = " ${base_bindir}/* \
 FILES_${PN}-dbg += "${systemd_unitdir}/.debug ${systemd_unitdir}/*/.debug ${base_libdir}/security/.debug/"
 FILES_${PN}-dev += "${base_libdir}/security/*.la ${datadir}/dbus-1/interfaces/ ${sysconfdir}/rpm/macros.systemd"
 
-RDEPENDS_${PN} += "dbus udev-systemd"
+RDEPENDS_${PN} += "dbus"
 
 RRECOMMENDS_${PN} += "systemd-serialgetty \
                       util-linux-agetty \
@@ -179,7 +179,7 @@ RRECOMMENDS_${PN} += "systemd-serialgetty \
                       kernel-module-autofs4 kernel-module-unix kernel-module-ipv6 \
 "
 
-PACKAGES =+ "udev-dbg udev udev-consolekit udev-utils udev-systemd"
+PACKAGES =+ "udev-dbg udev udev-consolekit udev-utils"
 
 FILES_udev-dbg += "/lib/udev/.debug"
 
@@ -210,6 +210,8 @@ FILES_udev += "${base_sbindir}/udevd \
                /lib/udev/rules.d/95*.rules \
                ${base_libdir}/udev/hwdb.d \
                ${sysconfdir}/udev \
+               ${systemd_unitdir}/system/*udev* \
+               ${systemd_unitdir}/system/*.wants/*udev* \
               "
 
 FILES_udev-consolekit += "/lib/ConsoleKit"
@@ -217,9 +219,6 @@ RDEPENDS_udev-consolekit += "${@base_contains('DISTRO_FEATURES', 'x11', 'console
 
 FILES_udev-utils = "${bindir}/udevadm"
 
-FILES_udev-systemd = "${systemd_unitdir}/system/*udev* ${systemd_unitdir}/system/*.wants/*udev*"
-RDEPENDS_udev-systemd = "udev"
-
 # TODO:
 # u-a for runlevel and telinit
 
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/9 busybox: add systemd enabling for syslog and klogd

In reply to Ross Burton

From: Radu Moisan <[email protected]>

---
 meta/recipes-core/busybox/busybox.inc                 |   17 ++++++++++++++++-
 meta/recipes-core/busybox/busybox_1.20.2.bb           |    2 ++
 .../busybox/files/busybox-klogd.service.in            |    8 ++++++++
 .../busybox/files/busybox-syslog.service.in           |   13 +++++++++++++
 4 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-core/busybox/files/busybox-klogd.service.in
 create mode 100644 meta/recipes-core/busybox/files/busybox-syslog.service.in
meta/recipes-core/busybox/busybox.inc +16 -1
index fc6ca91..ddd2976 100644
@@ -23,6 +23,7 @@ FILES_${PN}-mdev = "${sysconfdir}/init.d/mdev ${sysconfdir}/mdev.conf"
 FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd"
 FILES_${PN}-udhcpc = "${sysconfdir}/udhcpc.d ${datadir}/udhcpc"
 FILES_${PN}-hwclock = "${sysconfdir}/init.d/hwclock.sh"
+FILES_${PN}-syslog = "${systemd_unitdir}/system/syslog.service"
 
 INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-syslog ${PN}-udhcpd ${PN}-mdev ${PN}-hwclock"
 
@@ -32,12 +33,16 @@ INITSCRIPT_NAME_${PN}-mdev = "mdev"
 INITSCRIPT_NAME_${PN}-hwclock = "hwclock.sh"
 INITSCRIPT_PARAMS_${PN}-mdev = "start 06 S ."
 INITSCRIPT_NAME_${PN}-udhcpd = "busybox-udhcpd" 
+
+SYSTEMD_PACKAGES = "${PN}-syslog"
+SYSTEMD_SERVICE_${PN}-syslog = "${PN}-syslog.service"
+
 CONFFILES_${PN}-syslog = "${sysconfdir}/syslog-startup.conf.${BPN}"
 CONFFILES_${PN}-mdev = "${sysconfdir}/mdev.conf"
 
 RRECOMMENDS_${PN} = "${PN}-syslog ${PN}-udhcpc"
 
-inherit cml1 update-rc.d
+inherit cml1 systemd update-rc.d
 
 # internal helper
 def busybox_cfg(feature, features, tokens, cnf, rem):
@@ -213,6 +218,16 @@ do_install () {
                fi
 	fi
 	install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
+
+    if ${@base_contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+        install -d ${D}${systemd_unitdir}/system
+        sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-syslog.service.in \
+            > ${D}${systemd_unitdir}/system/busybox-syslog.service
+        sed 's,@base_sbindir@,${base_sbindir},g' < ${WORKDIR}/busybox-klogd.service.in \
+            > ${D}${systemd_unitdir}/system/busybox-klogd.service
+
+        ln -sf /dev/null ${D}${systemd_unitdir}/system/syslog.service
+    fi
 }
 
 inherit update-alternatives
meta/recipes-core/busybox/busybox_1.20.2.bb +2 -0
index 783261e..a02cd38 100644
@@ -28,6 +28,8 @@ SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
            file://fix-for-spurious-testsuite-failure.patch \
            file://busybox-1.20.2-kernel_ver.patch \
            file://stat-usr-bin.patch \
+           file://busybox-syslog.service.in \
+           file://busybox-klogd.service.in \
            file://testsuite-du-du-k-works-fix-false-positive.patch"
 
 SRC_URI[tarball.md5sum] = "e025414bc6cd79579cc7a32a45d3ae1c"
meta/recipes-core/busybox/files/busybox-klogd.service.in new file +8 -0
new file mode 100644
index 0000000..d7c7755
@@ -0,0 +1,8 @@
+[Unit]
+Description=Kernel Logging Service
+
+[Service]
+ExecStart=@base_sbindir@/klogd -n
+
+[Install]
+WantedBy=multi-user.target
meta/recipes-core/busybox/files/busybox-syslog.service.in new file +13 -0
new file mode 100644
index 0000000..2e04321
@@ -0,0 +1,13 @@
+[Unit]
+Description=System Logging Service
+Wants=busybox-klogd.service
+
+[Service]
+EnvironmentFile=-/etc/default/busybox-syslog
+ExecStart=@base_sbindir@/syslogd -n $OPTIONS
+Sockets=syslog.socket
+
+[Install]
+WantedBy=multi-user.target
+Also=busybox-klogd.service
+Alias=syslog.service
Signature · 1 line
1.7.10.4
#3 lore raw

PATCH 3/9 systemd: make xz support (compressed journal) optional

In reply to Ross Burton

Defaults to enabled but if you don't want to use the journal and need some space, this can now be disabled.

---
 meta/recipes-core/systemd/systemd_197.bb |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
meta/recipes-core/systemd/systemd_197.bb +4 -2
index 962b120..9a66a4e 100644
@@ -11,7 +11,7 @@ PROVIDES = "udev"
 PE = "1"
 PR = "r4"
 
-DEPENDS = "xz kmod docbook-sgml-dtd-4.1-native intltool-native gperf-native acl readline dbus libcap libcgroup tcp-wrappers glib-2.0"
+DEPENDS = "kmod docbook-sgml-dtd-4.1-native intltool-native gperf-native acl readline dbus libcap libcgroup tcp-wrappers glib-2.0"
 DEPENDS += "${@base_contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
 
 SECTION = "base/shell"
@@ -43,9 +43,11 @@ LDFLAGS_libc-uclibc_append = " -lrt"
 
 GTKDOC_DOCDIR = "${S}/docs/"
 
-PACKAGECONFIG ??= ""
+PACKAGECONFIG ??= "xz"
 # Sign the journal for anti-tampering
 PACKAGECONFIG[gcrypt] = "--enable-gcrypt,--disable-gcrypt,libgcrypt"
+# Compress the journal
+PACKAGECONFIG[xz] = "--enable-xz,--disable-xz,xz"
 
 CACHED_CONFIGUREVARS = "ac_cv_path_KILL=${base_bindir}/kill"
 
Signature · 1 line
1.7.10.4
#4 lore raw

PATCH 4/9 default-providers: change udev selection logic

In reply to Ross Burton

Change the logic so that the udev provider is the standalone udev, unless the systemd DISTRO_FEATURE is set. This is required so that hybrid distros with both sysvinit and systemd will have a usable provider (in this case, systemd's udev).

---
 meta/conf/distro/include/default-providers.inc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/conf/distro/include/default-providers.inc +1 -1
index ebf2a09..f7ee789 100644
@@ -38,4 +38,4 @@ PREFERRED_PROVIDER_nativesdk-opkg ?= "nativesdk-opkg"
 PREFERRED_PROVIDER_console-tools ?= "kbd"
 PREFERRED_PROVIDER_gzip-native ?= "pigz-native"
 PREFERRED_PROVIDER_make ?= "make"
-PREFERRED_PROVIDER_udev ?= "${@base_contains('DISTRO_FEATURES','sysvinit','udev','',d)}${@base_contains('DISTRO_FEATURES','systemd','systemd','',d)}"
+PREFERRED_PROVIDER_udev ?= "${@base_contains('DISTRO_FEATURES','systemd','systemd','udev',d)}"
Signature · 1 line
1.7.10.4
#5 lore raw

PATCH 5/9 update-rcd.bbclass: handle both sysvinit and systemd features being present

In reply to Ross Burton

Run the helper if the sysvinit feature is present, or if the systemd feature is present but the systemd class hasn't been inherited. We want to run in the latter case as systemd has sysvinit compatibility, but we don't want to always so that pure systemd images don't have redundent sysvinit files.

---
 meta/classes/update-rc.d.bbclass                          |    9 ++++++---
 meta/recipes-core/packagegroups/packagegroup-core-boot.bb |    4 ++--
 2 files changed, 8 insertions(+), 5 deletions(-)
meta/classes/update-rc.d.bbclass +6 -3
index 65bf022..06b91c1 100644
@@ -75,9 +75,12 @@ python populate_packages_updatercd () {
         postrm += d.getVar('updatercd_postrm', True)
         d.setVar('pkg_postrm_%s' % pkg, postrm)
 
-    # If the systemd class has also been inherited, then don't do anything as
-    # the systemd units will override anything created by update-rc.d.
-    if not d.getVar("SYSTEMD_BBCLASS_ENABLED", True):
+    # Run if the sysvinit feature is present, or if the systemd feature is present
+    # but the systemd class hasn't been inherited.  We want to run in the latter case
+    # as systemd has sysvinit compatibility, but we don't want to always so that
+    # pure systemd images don't have redundent sysvinit files.
+    if "sysvinit" in d.getVar("DISTRO_FEATURES").split() or \
+       ("systemd" in d.getVar("DISTRO_FEATURES").split() and not d.getVar("SYSTEMD_BBCLASS_ENABLED", True)):
         pkgs = d.getVar('INITSCRIPT_PACKAGES', True)
         if pkgs == None:
             pkgs = d.getVar('UPDATERCPN', True)
meta/recipes-core/packagegroups/packagegroup-core-boot.bb +2 -2
index b9183a8..e73b46e 100644
@@ -27,7 +27,7 @@ RCONFLICTS_${PN} = "task-core-boot"
 VIRTUAL-RUNTIME_dev_manager ?= "udev"
 VIRTUAL-RUNTIME_login_manager ?= "tinylogin"
 VIRTUAL-RUNTIME_init_manager ?= "${DISTRO_FEATURES_INITMAN}"
-VIRTUAL-RUNTIME_initscripts ?= "${@base_contains('DISTRO_FEATURES', 'sysvinit', 'initscripts', '',d)}"
+VIRTUAL-RUNTIME_initscripts ?= "${@base_contains('DISTRO_FEATURES_INITMAN', 'sysvinit', 'initscripts', '',d)}"
 VIRTUAL-RUNTIME_keymaps ?= "keymaps"
 
 RDEPENDS_${PN} = "\
@@ -42,7 +42,7 @@ RDEPENDS_${PN} = "\
     ${VIRTUAL-RUNTIME_login_manager} \
     ${VIRTUAL-RUNTIME_init_manager} \
     ${VIRTUAL-RUNTIME_initscripts} \
-    ${@base_contains('DISTRO_FEATURES', 'systemd', 'systemd-compat-units', '',d)} \
+    ${@base_contains('DISTRO_FEATURES_INITMAN', 'systemd', 'systemd-compat-units', '',d)} \
     ${VIRTUAL-RUNTIME_dev_manager} \
     ${VIRTUAL-RUNTIME_update-alternatives} \
     ${MACHINE_ESSENTIAL_EXTRA_RDEPENDS}"
Signature · 1 line
1.7.10.4
#6 lore raw

Re: [PATCH 5/9] update-rcd.bbclass: handle both sysvinit and systemd features being present

Quoted 45 lines · Ross Burton

Run the helper if the sysvinit feature is present, or if the systemd feature is present but the systemd class hasn't been inherited. We want to run in the latter case as systemd has sysvinit compatibility, but we don't want to always so that pure systemd images don't have redundent sysvinit files.

---
 meta/classes/update-rc.d.bbclass                          |    9 ++++++---
 meta/recipes-core/packagegroups/packagegroup-core-boot.bb |    4 ++--
 2 files changed, 8 insertions(+), 5 deletions(-)
meta/classes/update-rc.d.bbclass +6 -3
index 65bf022..06b91c1 100644
@@ -75,9 +75,12 @@ python populate_packages_updatercd () {
         postrm += d.getVar('updatercd_postrm', True)
         d.setVar('pkg_postrm_%s' % pkg, postrm)
 
-    # If the systemd class has also been inherited, then don't do anything as
-    # the systemd units will override anything created by update-rc.d.
-    if not d.getVar("SYSTEMD_BBCLASS_ENABLED", True):
+    # Run if the sysvinit feature is present, or if the systemd feature is present
+    # but the systemd class hasn't been inherited.  We want to run in the latter case
+    # as systemd has sysvinit compatibility, but we don't want to always so that
+    # pure systemd images don't have redundent sysvinit files.
+    if "sysvinit" in d.getVar("DISTRO_FEATURES").split() or \
+       ("systemd" in d.getVar("DISTRO_FEATURES").split() and not d.getVar("SYSTEMD_BBCLASS_ENABLED", True)):
         pkgs = d.getVar('INITSCRIPT_PACKAGES', True)
         if pkgs == None:
             pkgs = d.getVar('UPDATERCPN', True)
meta/recipes-core/packagegroups/packagegroup-core-boot.bb +1 -1
index b9183a8..e73b46e 100644
@@ -27,7 +27,7 @@ RCONFLICTS_${PN} = "task-core-boot"
 VIRTUAL-RUNTIME_dev_manager ?= "udev"
 VIRTUAL-RUNTIME_login_manager ?= "tinylogin"
 VIRTUAL-RUNTIME_init_manager ?= "${DISTRO_FEATURES_INITMAN}"
-VIRTUAL-RUNTIME_initscripts ?= "${@base_contains('DISTRO_FEATURES', 'sysvinit', 'initscripts', '',d)}"
+VIRTUAL-RUNTIME_initscripts ?= "${@base_contains('DISTRO_FEATURES_INITMAN', 'sysvinit', 'initscripts', '',d)}"
 VIRTUAL-RUNTIME_keymaps ?= "keymaps"
 
 RDEPENDS_${PN} = "\

meta/recipes-core/packagegroups/packagegroup-core-boot.bb RDEPENDS_${PN} = "\ · line 45

Quoted 5 lines
meta/recipes-core/packagegroups/packagegroup-core-boot.bb +1 -1
@@ -42,7 +42,7 @@ RDEPENDS_${PN} = "\
     ${VIRTUAL-RUNTIME_login_manager} \
     ${VIRTUAL-RUNTIME_init_manager} \
     ${VIRTUAL-RUNTIME_initscripts} \
-    ${@base_contains('DISTRO_FEATURES', 'systemd', 'systemd-compat-units', '',d)} \
+    ${@base_contains('DISTRO_FEATURES_INITMAN', 'systemd', 'systemd-compat-units', '',d)} \

Why these 2 changes? I don't see any explanation in commit message.

Quoted 11 lines
meta/recipes-core/packagegroups/packagegroup-core-boot.bb +0 -0
     ${VIRTUAL-RUNTIME_dev_manager} \
     ${VIRTUAL-RUNTIME_update-alternatives} \
     ${MACHINE_ESSENTIAL_EXTRA_RDEPENDS}"
Signature · 7 lines
1.7.10.4


_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Signature · 1 line
Martin 'JaMa' Jansa     jabber: [email protected]
#7 lore raw

PATCH 6/9 systemd: allow postinsts to run without systemd being present

In reply to Ross Burton

These fragments may be used on a system that didn't actually boot with systemd, so check for systemctl first, and don't force systemd to be installed.

---
 meta/classes/systemd.bbclass |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)
meta/classes/systemd.bbclass +11 -16
index 564cd72..f622f9c 100644
@@ -24,19 +24,23 @@ if [ -n "$D" ]; then
     OPTS="--root=$D"
 fi
 
-systemctl $OPTS ${SYSTEMD_AUTO_ENABLE} ${SYSTEMD_SERVICE}
+if which systemctl >/dev/null; then
+	systemctl $OPTS ${SYSTEMD_AUTO_ENABLE} ${SYSTEMD_SERVICE}
 
-if [ -z "$D" -a "${SYSTEMD_AUTO_ENABLE}" = "enable" ]; then
-    systemctl start ${SYSTEMD_SERVICE}
+	if [ -z "$D" -a "${SYSTEMD_AUTO_ENABLE}" = "enable" ]; then
+		systemctl start ${SYSTEMD_SERVICE}
+	fi
 fi
 }
 
 systemd_prerm() {
-if [ -z "$D" ]; then
-    systemctl stop ${SYSTEMD_SERVICE}
-fi
+if which systemctl >/dev/null; then
+	if [ -z "$D" ]; then
+		systemctl stop ${SYSTEMD_SERVICE}
+	fi
 
-systemctl disable ${SYSTEMD_SERVICE}
+	systemctl disable ${SYSTEMD_SERVICE}
+fi
 }
 
 python systemd_populate_packages() {
@@ -56,14 +60,6 @@ python systemd_populate_packages() {
             bb.error('%s does not appear in package list, please add it' % pkg_systemd)
 
 
-    # Add a runtime dependency on systemd to pkg
-    def systemd_add_rdepends(pkg):
-        rdepends = d.getVar('RDEPENDS_' + pkg, True) or ""
-        if not 'systemd' in rdepends.split():
-            rdepends = '%s %s' % (rdepends, 'systemd')
-        d.setVar('RDEPENDS_' + pkg, rdepends)
-
-
     def systemd_generate_package_scripts(pkg):
         bb.debug(1, 'adding systemd calls to postinst/postrm for %s' % pkg)
 
@@ -156,7 +152,6 @@ python systemd_populate_packages() {
             systemd_check_package(pkg)
             if d.getVar('SYSTEMD_SERVICE_' + pkg, True):
                 systemd_generate_package_scripts(pkg)
-                systemd_add_rdepends(pkg)
         systemd_check_services()
 }
 
Signature · 1 line
1.7.10.4
#8 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

Ross Burton <[email protected]>

Quoted 3 lines · writes:

These fragments may be used on a system that didn't actually boot with systemd, so check for systemctl first, and don't force systemd to be installed.

Checking for existence of programs in scriplets is a bad hack which might hide real problems and the scriplets are getting more complicated by this.

Placing scriplets and related files into separate subpackages is a much cleaner solution.

Quoted 1 line

+if which systemctl >/dev/null; then

check with the shell builtin 'type $prog' is more portable and does not require the external 'which' program.

Enrico

#9 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

Quoted 4 lines · Enrico Scholz
Quoted 1 line

+if which systemctl >/dev/null; then

check with the shell builtin 'type $prog' is more portable and does not require the external 'which' program.

Tried that (type -p systemctl), and failed on the host. Really not sure why to be honest.

Ross

#10 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

Quoted 6 lines · Ross
Quoted 4 lines
Quoted 1 line

+if which systemctl >/dev/null; then

check with the shell builtin 'type $prog' is more portable and does not require the external 'which' program.

Tried that (type -p systemctl)

'type systemctl'; 'type -p ...' is a bashism.

Enrico

#11 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

Quoted 1 line · Enrico Scholz

'type systemctl'; 'type -p ...' is a bashism.

Pretty sure I tried both, and busybox source shows it won't error out on "-p". I'll try again.

Ross

#12 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

"Burton, Ross" <[email protected]>

Quoted 4 lines · writes:
Quoted 1 line

'type systemctl'; 'type -p ...' is a bashism.

Pretty sure I tried both, and busybox source shows it won't error out on "-p".

But 'dash' on host will fail.

Enrico

#13 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

In reply to Enrico Scholz
Quoted 6 lines · Enrico Scholz

Checking for existence of programs in scriplets is a bad hack which might hide real problems and the scriplets are getting more complicated by this.

Placing scriplets and related files into separate subpackages is a much cleaner solution.

Sure, but then you're just substituting one ugly hack for bigger problems including upgrade paths, which aren't actually solvable in a general way.

Ross

#14 lore raw

Re: [PATCH 6/9] systemd: allow postinsts to run without systemd being present

Quoted 9 lines · Ross
Quoted 6 lines

Checking for existence of programs in scriplets is a bad hack which might hide real problems and the scriplets are getting more complicated by this.

Placing scriplets and related files into separate subpackages is a much cleaner solution.

Sure, but then you're just substituting one ugly hack for bigger problems including upgrade

What is the problem with subpackages and upgrade paths?

Enrico

#15 lore raw

PATCH 7/9 systemd: add udev init script for hybrid sysvinit/systemd usage

In reply to Ross Burton

If a distro is built with both sysvinit and systemd then we may be booting systemd's udev on sysvinit, so add a sysvinit-style init script for udev (copied from udev).

---
 meta/recipes-core/systemd/systemd/init   |  101 ++++++++++++++++++++++++++++++
 meta/recipes-core/systemd/systemd_197.bb |   13 +++-
 2 files changed, 113 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-core/systemd/systemd/init
meta/recipes-core/systemd/systemd/init new file +101 -0
new file mode 100644
index 0000000..be3c379
@@ -0,0 +1,101 @@
+#!/bin/sh
+
+### BEGIN INIT INFO
+# Provides:          udev
+# Required-Start:    mountvirtfs
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Start udevd, populate /dev and load drivers.
+### END INIT INFO
+
+. /etc/init.d/functions
+
+export TZ=/etc/localtime
+
+[ -d /sys/class ] || exit 1
+[ -r /proc/mounts ] || exit 1
+[ -x /lib/udev/udevd ] || exit 1
+[ -f /etc/default/udev-cache ] && . /etc/default/udev-cache
+[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
+
+readfile () {
+   filename=$1
+   READDATA=""
+   if [ -r $filename ]; then
+       while read line; do
+           READDATA="$READDATA$line"
+       done < $filename
+   fi
+}
+
+case "$1" in
+  start)
+    export ACTION=add
+    # propagate /dev from /sys
+    echo "Starting udev"
+
+    # mount the tmpfs on /dev, if not already done
+    LANG=C awk '$2 == "/dev" && ($3 == "tmpfs" || $3 == "devtmpfs") { exit 1 }' /proc/mounts && {
+            mount -n -o mode=0755 -t tmpfs none "/dev"
+    }
+    [ -e /dev/pts ] || mkdir -m 0755 /dev/pts
+    [ -e /dev/shm ] || mkdir -m 1777 /dev/shm
+    mount -a -t tmpfs 2>/dev/null
+    mkdir -p /var/volatile/run
+
+    # cache handling
+    if [ "$DEVCACHE" != "" ]; then
+            readfile /proc/version
+            VERSION="$READDATA"
+            readfile /proc/cmdline
+            CMDLINE="$READDATA"
+            readfile /proc/devices
+            DEVICES="$READDATA"
+            readfile /proc/atags
+            ATAGS="$READDATA"
+
+            if [ -e $DEVCACHE ]; then
+                    readfile /etc/udev/cache.data
+                    if [ "$READDATA" = "$VERSION$CMDLINE$DEVICES$ATAGS" ]; then
+                            (cd /; tar xf $DEVCACHE > /dev/null 2>&1)
+                            not_first_boot=1
+                    fi
+
+                    echo "$VERSION$CMDLINE$DEVICES$ATAGS" > /dev/shm/udev.cache
+            fi
+    fi
+
+    # make_extra_nodes
+    killproc udevd > "/dev/null" 2>&1
+
+    # trigger the sorted events
+    echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
+    /lib/udev/udevd -d
+
+    /usr/bin/udevadm control --env=STARTUP=1
+    if [ "$not_first_boot" != "" ];then
+            /usr/bin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus  --subsystem-nomatch=graphics	 --subsystem-nomatch=backlight --subsystem-nomatch=video4linux	--subsystem-nomatch=platform
+            (/usr/bin/udevadm settle --timeout=3; /usr/bin/udevadm control --env=STARTUP=)&
+    else
+            /usr/bin/udevadm trigger --action=add
+            /usr/bin/udevadm settle
+    fi
+    ;;
+  stop)
+    echo "Stopping udevd"
+    start-stop-daemon --stop --name udevd --quiet
+    ;;
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+  status)
+    status udevd
+    ;;
+  *)
+    echo "Usage: $0 {start|stop|status|restart}"
+    exit 1
+esac
+exit 0
meta/recipes-core/systemd/systemd_197.bb +12 -1
index 9a66a4e..50d052f 100644
@@ -16,7 +16,7 @@ DEPENDS += "${@base_contains('DISTRO_FEATURES', 'pam', 'libpam', '', d)}"
 
 SECTION = "base/shell"
 
-inherit gtk-doc useradd pkgconfig autotools perlnative
+inherit gtk-doc useradd pkgconfig autotools perlnative update-rc.d
 
 SRC_URI = "http://www.freedesktop.org/software/systemd/systemd-${PV}.tar.xz \
            file://touchscreen.rules \
@@ -26,6 +26,7 @@ SRC_URI = "http://www.freedesktop.org/software/systemd/systemd-${PV}.tar.xz \
            file://00-create-volatile.conf \
            file://0001-systemd-analyze-rewrite-in-C.patch \
            file://udev-linkage.patch \
+           file://init \
           "
 SRC_URI[md5sum] = "56a860dceadfafe59f40141eb5223743"
 SRC_URI[sha256sum] = "e6857ea21ae24d7056e7b0f4c2aaaba73b8bf57025b8949c0a8af0c1bc9774b5"
@@ -101,6 +102,11 @@ do_install() {
 	install -m 0644 ${WORKDIR}/var-run.conf ${D}${sysconfdir}/tmpfiles.d/
 
 	install -m 0644 ${WORKDIR}/00-create-volatile.conf ${D}${sysconfdir}/tmpfiles.d/
+
+	if ${@base_contains('DISTRO_FEATURES','sysvinit','true','false',d)}; then
+		install -d ${D}${sysconfdir}/init.d
+		install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/udev
+	fi
 }
 
 python populate_packages_prepend (){
@@ -212,6 +218,7 @@ FILES_udev += "${base_sbindir}/udevd \
                /lib/udev/rules.d/95*.rules \
                ${base_libdir}/udev/hwdb.d \
                ${sysconfdir}/udev \
+               ${sysconfdir}/init.d/udev \
                ${systemd_unitdir}/system/*udev* \
                ${systemd_unitdir}/system/*.wants/*udev* \
               "
@@ -221,6 +228,10 @@ RDEPENDS_udev-consolekit += "${@base_contains('DISTRO_FEATURES', 'x11', 'console
 
 FILES_udev-utils = "${bindir}/udevadm"
 
+INITSCRIPT_PACKAGES = "udev"
+INITSCRIPT_NAME_udev = "udev"
+INITSCRIPT_PARAMS_udev = "start 03 S ."
+
 # TODO:
 # u-a for runlevel and telinit
 
Signature · 1 line
1.7.10.4
#16 lore raw

PATCH 8/9 update-rc.d/systemd: change communication variable name

In reply to Ross Burton

Rename SYSTEMD_BBCLASS_ENABLED to INHIBIT_UPDATERCD_BBCLASS to reflect it's side-effect for clarity.

---
 meta/classes/systemd.bbclass     |   10 ++++++----
 meta/classes/update-rc.d.bbclass |    8 +++-----
 2 files changed, 9 insertions(+), 9 deletions(-)
meta/classes/systemd.bbclass +6 -4
index f622f9c..e1129c6 100644
@@ -10,11 +10,13 @@ SYSTEMD_AUTO_ENABLE ??= "enable"
 # even if the systemd DISTRO_FEATURE isn't enabled.  As such don't make any
 # changes directly but check the DISTRO_FEATURES first.
 python __anonymous() {
-    if "systemd" in d.getVar("DISTRO_FEATURES", True).split():
+    features = d.getVar("DISTRO_FEATURES", True).split()
+    # If the distro features have systemd but not sysvinit, inhibit update-rcd
+    # from doing any work so that pure-systemd images don't have redundant init
+    # files.
+    if "systemd" in features and "sysvinit" not in features:
         d.appendVar("DEPENDS", " systemd-systemctl-native")
-        # Set a variable so that update-rcd.bbclass knows we're active and can
-        # disable itself.
-        d.setVar("SYSTEMD_BBCLASS_ENABLED", "1")
+        d.setVar("INHIBIT_UPDATERCD_BBCLASS", "1")
 }
 
 systemd_postinst() {
meta/classes/update-rc.d.bbclass +3 -5
index 06b91c1..e527fcc 100644
@@ -75,12 +75,10 @@ python populate_packages_updatercd () {
         postrm += d.getVar('updatercd_postrm', True)
         d.setVar('pkg_postrm_%s' % pkg, postrm)
 
-    # Run if the sysvinit feature is present, or if the systemd feature is present
-    # but the systemd class hasn't been inherited.  We want to run in the latter case
-    # as systemd has sysvinit compatibility, but we don't want to always so that
-    # pure systemd images don't have redundent sysvinit files.
+    # Check that this class isn't being inhibited (generally, by
+    # systemd.bbclass) before doing any work.
     if "sysvinit" in d.getVar("DISTRO_FEATURES").split() or \
-       ("systemd" in d.getVar("DISTRO_FEATURES").split() and not d.getVar("SYSTEMD_BBCLASS_ENABLED", True)):
+       not d.getVar("INHIBIT_UPDATERCD_BBCLASS", True):
         pkgs = d.getVar('INITSCRIPT_PACKAGES', True)
         if pkgs == None:
             pkgs = d.getVar('UPDATERCPN', True)
Signature · 1 line
1.7.10.4
#17 lore raw

PATCH 9/9 default-distrovars: don't add DISTRO_FEATURES_INITMAN to DISTRO_FEATURES

In reply to Ross Burton

It will be backfilled later, so don't add it to the default DISTRO_FEATURES.

---
 meta/conf/distro/include/default-distrovars.inc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/conf/distro/include/default-distrovars.inc +1 -1
index f0fec2a..eafbcc2 100644
@@ -18,7 +18,7 @@ DISTRO_FEATURES_LIBC_DEFAULT ?= "ipv4 ipv6 libc-backtrace libc-big-macros libc-b
 DISTRO_FEATURES_LIBC ?= "${DISTRO_FEATURES_LIBC_DEFAULT}"
 DISTRO_FEATURES_LIBC_class-nativesdk = "${DISTRO_FEATURES_LIBC_DEFAULT}"
 DISTRO_FEATURES_INITMAN ?= "sysvinit"
-DISTRO_FEATURES ?= "alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ${DISTRO_FEATURES_LIBC} ${DISTRO_FEATURES_INITMAN}"
+DISTRO_FEATURES ?= "alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 ${DISTRO_FEATURES_LIBC}"
 
 IMAGE_FEATURES ?= ""
 
Signature · 1 line
1.7.10.4
#18 lore raw
In reply to Ross Burton
Quoted 3 lines · Ross Burton

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

Ross

#19 lore raw
Quoted 5 lines · Ross
Quoted 3 lines · Ross Burton

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Quoted 9 lines

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#20 lore raw

Hi,

Quoted 3 lines · Otavio Salvador

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

I'd love Martin to speak for himself in this thread.

The big difference between meta-systemd and this series is that if you enable both, you'll get a few service files in the sysvinit images and probably libsystemd-daemon. In total we're talking about a 50K increase here which is for practical purposes negligible.

Are you objecting to the redundant service files (which you could remove in a image construction hook, along with anything else that can be wiped when you need to save every byte), or something else?

Ross

#21 lore raw
In reply to Otavio Salvador
Quoted 16 lines · Otavio Salvador
Quoted 5 lines · Ross
Quoted 3 lines · Ross Burton

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Quoted 9 lines

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

Quoted 3 lines

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

using different init manager is a separate problem than what Ross tried to address here isn't it ? I personally don't have a use case where I would upgrade live from 1.3 to 1.4 so for me I could easily accept a different solution for 1.4

Quoted 10 lines
Signature · 9 lines
-- 
Otavio Salvador                             O.S. Systems
E-mail: [email protected]  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
#22 lore raw
Quoted 1 line · Khem Raj

using different init manager is a separate problem than what Ross tried to address here isn't it ?

This series lets you do DISTRO_FEATURES="systemd sysvinit" and it will build support for both in the packages, and then based on DISTRO_FEATURES_INITMAN it will build different images.

Ross

#23 lore raw

Op 12 mrt. 2013, om 00:21 heeft "Burton, Ross" <[email protected]> het volgende geschreven:

Quoted 6 lines · Khem Raj
Quoted 1 line

using different init manager is a separate problem than what Ross tried to address here isn't it ?

This series lets you do DISTRO_FEATURES="systemd sysvinit" and it will build support for both in the packages, and then based on DISTRO_FEATURES_INITMAN it will build different images.

Isn't DISTRO_FEATURES_INITMAN more like an IMAGE_FEATURE now?

#24 lore raw
Quoted 1 line · Koen Kooi

Isn't DISTRO_FEATURES_INITMAN more like an IMAGE_FEATURE now?

In a sense - it populates a distro feature though a backfill and is used when constructing an image, so if you explicitly set DISTRO_FEATURES to include both then swapping this will change the image.

As I said, it should probably be renamed. Any suggestions?

Ross

#25 lore raw
In reply to Khem Raj

Op 11 mrt. 2013, om 23:49 heeft Khem Raj <[email protected]> het volgende geschreven:

Quoted 19 lines · Otavio Salvador
Quoted 17 lines · Ross
Quoted 14 lines · Ross Burton
Quoted 3 lines

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

Quoted 7 lines
Quoted 3 lines

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

using different init manager is a separate problem than what Ross tried to address here isn't it ? I personally don't have a use case where I would upgrade live from 1.3 to 1.4 so for me I could easily accept a different solution for 1.4

Upgrading between 1.3 and 1.4 is already impossible for non-systemd related reasons. But that shouldn't be a reason to break upgrade paths for other things, so I'd very much like to see some attention to this for 1.5.

#26 lore raw
Quoted 25 lines · Koen Kooi

Op 11 mrt. 2013, om 23:49 heeft Khem Raj <[email protected]> het volgende geschreven:

Quoted 23 lines · Otavio Salvador
Quoted 20 lines · Ross
Quoted 5 lines · Ross Burton
Quoted 3 lines

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Quoted 9 lines

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

Quoted 6 lines
Quoted 3 lines

using different init manager is a separate problem than what Ross tried to address here isn't it ? I personally don't have a use case where I would upgrade live from 1.3 to 1.4 so for me I could easily accept a different solution for 1.4

Upgrading between 1.3 and 1.4 is already impossible for non-systemd related reasons.

Which reasons?

Cheers,

Richard

#27 lore raw

Op 12 mrt. 2013, om 19:50 heeft Richard Purdie <[email protected]> het volgende geschreven:

Quoted 26 lines · Koen Kooi
Quoted 25 lines

Op 11 mrt. 2013, om 23:49 heeft Khem Raj <[email protected]> het volgende geschreven:

Quoted 23 lines · Otavio Salvador
Quoted 20 lines · Ross
Quoted 5 lines · Ross Burton
Quoted 3 lines

This series allows you to have both sysvinit and systemd in DISTRO_FEATURES. Packages will be built with both init scripts, and some daemons will be linking to libsystemd-daemon so that will be pulled in to sysvinit images.

Quoted 9 lines

Regarding the upgrade path, Richard/Paul/myself discussed this over lunch and proposed that oe-core could gain an include file for distro configuration that basically injects the backward compatibility dependencies. So for meta-systemd, it would inject replaces/provides/conflicts for each of the packages in meta-systemd. This would isolate the dependencies into a single location, and be opt-in for distros that previously shipped meta-systemd. Hopefully the implementation of this is obvious, and patches to implement this are welcome.

I personally prefer to still use meta-oe systemd class and keep the possibility to product images with choosen init system. I think Martin will also prefer it.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

using different init manager is a separate problem than what Ross tried to address here isn't it ? I personally don't have a use case where I would upgrade live from 1.3 to 1.4 so for me I could easily accept a different solution for 1.4

Upgrading between 1.3 and 1.4 is already impossible for non-systemd related reasons.

Which reasons?

Warning, handwaving ahead: Renamed packages, differently split packages et cetera.

#28 lore raw
Quoted 9 lines · Koen Kooi

Op 12 mrt. 2013, om 19:50 heeft Richard Purdie <[email protected]> het volgende geschreven:

Quoted 6 lines · Koen Kooi
Quoted 3 lines

Op 11 mrt. 2013, om 23:49 heeft Khem Raj <[email protected]> het volgende geschreven:
Upgrading between 1.3 and 1.4 is already impossible for non-systemd related reasons.

Which reasons?

Warning, handwaving ahead: Renamed packages, differently split packages et cetera.

I thought we'd put Conflicts/Provides and other pieces in place to try and avoid this? If there are issues, I'm open to patches which help address the problems.

Cheers,

Richard

#29 lore raw
Quoted 7 lines · Richard Purdie
Quoted 6 lines · Koen Kooi

Op 12 mrt. 2013, om 19:50 heeft Richard Purdie <[email protected]> het volgende geschreven:

Quoted 5 lines · Koen Kooi
Quoted 3 lines

Op 11 mrt. 2013, om 23:49 heeft Khem Raj <[email protected]> het volgende geschreven:
Upgrading between 1.3 and 1.4 is already impossible for non-systemd related reasons.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Which reasons?

Warning, handwaving ahead: Renamed packages, differently split packages et cetera.

I thought we'd put Conflicts/Provides and other pieces in place to try and avoid this? If there are issues, I'm open to patches which help address the problems.

I try to report such issues as soon as they are introduced to developer who introduced them, but quite often those emails got no reply and issue is forgotten.

I know I should report them in bugzilla, but I usually use oe-commits list to find what changed since my last successful opkg upgrade and it's faster to just reply there then to create new bug report.

Most of those issues would be detected by developers if they build with buildhistory enabled and do upgrade on target device.

Signature · 1 line
Martin 'JaMa' Jansa     jabber: [email protected]