Zaurus kernel updates
cover Zaurus kernel updates
* hack again around collie flash, Read-Only until proper CFI detection
* introduce kernel 3.8 for all Zaurus, with DEFAULT_PREFERENCE -1
Andrea Adami (5):
linux-yocto-tiny-kexecboot: add patch fixing mtd on SL-C3200 linux-yocto_3.2: match the exact NOR on collie linux-yocto-tiny-kexecboot_3.2: match the exact NOR on collie linux-yocto-3.4: remove temporary version. Replace with 3.8 linux-yocto_3.8: initial commit for Zaurus devices
.../linux-yocto-3.2/collie/collie-eraseinfo.patch | 28 +- .../linux/linux-yocto-3.2/collie/collie.cfg | 4 +- .../linux/linux-yocto-3.4/akita/akita-standard.scc | 7 - .../linux/linux-yocto-3.4/akita/akita.cfg | 4 - .../linux/linux-yocto-3.4/akita/akita.scc | 11 - .../linux/linux-yocto-3.4/c7x0/c7x0-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg | 57 --- recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc | 10 - .../linux-yocto-3.4/collie/collie-standard.scc | 7 - .../linux/linux-yocto-3.4/collie/collie.cfg | 86 ----- .../linux/linux-yocto-3.4/collie/collie.scc | 5 - .../linux/linux-yocto-3.4/feature-top.scc | 1 - .../linux-yocto-3.4/locomo_kbd_tweak-r2.patch | 80 ---- .../linux-yocto-3.4/poodle/poodle-standard.scc | 7 - .../linux/linux-yocto-3.4/poodle/poodle.cfg | 62 ---- .../linux/linux-yocto-3.4/poodle/poodle.scc | 10 - .../linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch | 40 -- .../linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/sharpsl_param.patch | 24 -- .../linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch | 34 -- .../linux/linux-yocto-3.4/spitz/spitz-standard.scc | 7 - .../linux/linux-yocto-3.4/spitz/spitz.cfg | 67 ---- .../linux/linux-yocto-3.4/spitz/spitz.scc | 10 - .../linux/linux-yocto-3.4/spitz_pm.patch | 53 --- .../linux/linux-yocto-3.4/tosa/tosa-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg | 62 ---- recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc | 10 - .../linux/linux-yocto-3.4/zaurus-common.scc | 10 - .../linux/linux-yocto-3.4/zaurus-hardware.cfg | 279 -------------- .../linux/linux-yocto-3.4/zaurus-non-hardware.cfg | 401 --------------------- .../linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg | 9 - .../linux/linux-yocto-3.4/zaurus-pxa-common.cfg | 98 ----- .../linux/linux-yocto-3.4/zaurus-pxa-only.scc | 2 - .../linux/linux-yocto-3.4/zaurus-usb-host.scc | 6 - .../linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg | 4 - .../linux/linux-yocto-3.4/zaurus-usb-ohci.cfg | 110 ------ .../linux/linux-yocto-3.8/akita/akita-standard.scc | 7 + .../linux/linux-yocto-3.8/akita/akita.cfg | 4 + .../linux/linux-yocto-3.8/akita/akita.scc | 11 + .../linux/linux-yocto-3.8/c7x0/c7x0-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg | 52 +++ recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 8 + .../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 ++ .../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 + .../linux-yocto-3.8/collie/collie-standard.scc | 7 + .../linux/linux-yocto-3.8/collie/collie.cfg | 118 ++++++ .../linux/linux-yocto-3.8/collie/collie.scc | 8 + .../linux/linux-yocto-3.8/feature-top.scc | 1 + .../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ++++ .../linux/linux-yocto-3.8/mcp-device.patch | 13 + .../linux-yocto-3.8/poodle/poodle-standard.scc | 7 + .../linux/linux-yocto-3.8/poodle/poodle.cfg | 57 +++ .../linux/linux-yocto-3.8/poodle/poodle.scc | 8 + .../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ++ .../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ++ .../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ++ .../linux/linux-yocto-3.8/spitz/spitz-standard.scc | 7 + .../linux/linux-yocto-3.8/spitz/spitz.cfg | 61 ++++ .../linux/linux-yocto-3.8/spitz/spitz.scc | 10 + .../linux/linux-yocto-3.8/spitz_pm.patch | 53 +++ .../linux/linux-yocto-3.8/tosa/tosa-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg | 57 +++ recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 8 + .../linux/linux-yocto-3.8/zaurus-common.scc | 10 + .../linux/linux-yocto-3.8/zaurus-hardware.cfg | 279 ++++++++++++++ .../linux/linux-yocto-3.8/zaurus-non-hardware.cfg | 400 ++++++++++++++++++++ .../linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg | 9 + .../linux/linux-yocto-3.8/zaurus-pxa-common.cfg | 111 ++++++ .../linux/linux-yocto-3.8/zaurus-pxa-only.scc | 2 + .../linux/linux-yocto-3.8/zaurus-usb-host.scc | 6 + .../linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg | 4 + .../linux/linux-yocto-3.8/zaurus-usb-ohci.cfg | 110 ++++++ .../collie/collie-eraseinfo.patch | 28 +- .../collie/collie-kexecboot.cfg | 4 +- .../spitz/3200-mtd.patch | 13 + recipes-kernel/linux/linux-yocto_3.4.bbappend | 54 --- recipes-kernel/linux/linux-yocto_3.8.bbappend | 54 +++ 78 files changed, 1770 insertions(+), 1711 deletions(-) delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/feature-top.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/locomo_kbd_tweak-r2.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/sharpsl_param.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz_pm.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-common.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-non-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-only.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-host.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/REGULATORS create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/feature-top.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg create mode 100644 recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/spitz/3200-mtd.patch delete mode 100644 recipes-kernel/linux/linux-yocto_3.4.bbappend create mode 100644 recipes-kernel/linux/linux-yocto_3.8.bbappend
Signature · 1 line
1.7.12.4
PATCH 1/5 linux-yocto-tiny-kexecboot: add patch fixing mtd on SL-C3200
* the patch must be listed in SRC_URI when compiling for 'terrier'
* because kernel only knows about spitz and borzoi
--- .../linux-yocto-tiny-kexecboot-3.2/spitz/3200-mtd.patch | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/spitz/3200-mtd.patch
recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/spitz/3200-mtd.patch new file +13 -0
@@ -0,0 +1,13 @@ +diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c +index 953a919..14e7736 100644 +--- a/arch/arm/mach-pxa/spitz.c ++++ b/arch/arm/mach-pxa/spitz.c +@@ -802,7 +802,7 @@ static void __init spitz_nand_init(void) + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; + } else if (machine_is_borzoi()) { +- spitz_nand_partitions[1].size = 32 * 1024 * 1024; ++ spitz_nand_partitions[1].size = 43 * 1024 * 1024; + spitz_nand_bbt.len = 1; + spitz_nand_pdata.ecc_layout = &akita_oobinfo; + }
Signature · 1 line
1.7.12.4
PATCH 2/5 linux-yocto_3.2: match the exact NOR on collie
In reply to Andrea Adami* Zaurus 5500 contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16)
* as seen at http://www.tekprosystems.com/zaurus/internals.htm
* the LH28F640BFHE-PTTL90.pdf datasheet available on the net shows
* the exact erasesize and the OTP support.
* At the moment only jedec_probe can discover the chip and
* the NO is mounted read only probably because of wrong vpp
* (kernel 3.8.1 seems fixing the issue for sa1100)
--- .../linux-yocto-3.2/collie/collie-eraseinfo.patch | 28 ++++++++++++++++++---- .../linux/linux-yocto-3.2/collie/collie.cfg | 4 ++-- 2 files changed, 26 insertions(+), 6 deletions(-)
recipes-kernel/linux/linux-yocto-3.2/collie/collie-eraseinfo.patch +24 -4
@@ -1,11 +1,31 @@ --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c -@@ -1305,7 +1305,7 @@ - .cmd_set = P_ID_INTEL_STD, - .nr_regions = 1, +@@ -120,7 +120,7 @@ + #define PM49FL008 0x006A + + /* Sharp */ +-#define LH28F640BF 0x00b0 ++#define LH28F640BF 0x00B0 + + /* ST - www.st.com */ + #define M29F800AB 0x0058 +@@ -1299,13 +1299,14 @@ + .mfr_id = CFI_MFR_SHARP, + .dev_id = LH28F640BF, + .name = "LH28F640BF", +- .devtypes = CFI_DEVICETYPE_X8, ++ .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, +- .dev_size = SIZE_4MiB, +- .cmd_set = P_ID_INTEL_STD, +- .nr_regions = 1, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_INTEL_EXT, ++ .nr_regions = 2, .regions = { - ERASEINFO(0x40000,16), -+ ERASEINFO(0x08000,128), ++ ERASEINFO(0x10000, 127), ++ ERASEINFO(0x02000, 8), } }, { .mfr_id = CFI_MFR_SST,
recipes-kernel/linux/linux-yocto-3.2/collie/collie.cfg +2 -2
@@ -840,8 +840,8 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set # CONFIG_MTD_CFI_I1 is not set -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y
Signature · 1 line
1.7.12.4
PATCH 3/5 linux-yocto-tiny-kexecboot_3.2: match the exact NOR on collie
In reply to Andrea Adami* Zaurus 5500 contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16)
* as seen at http://www.tekprosystems.com/zaurus/internals.htm
* the LH28F640BFHE-PTTL90.pdf datasheet available on the net shows
* the exact erasesize and the OTP support.
* At the moment only jedec_probe can discover the chip and
* the NO is mounted read only probably because of wrong vpp
* (kernel 3.8.1 seems fixing the issue for sa1100)
--- .../collie/collie-eraseinfo.patch | 28 ++++++++++++++++++---- .../collie/collie-kexecboot.cfg | 4 ++-- 2 files changed, 26 insertions(+), 6 deletions(-)
recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/collie/collie-eraseinfo.patch +24 -4
@@ -1,11 +1,31 @@ --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c -@@ -1305,7 +1305,7 @@ - .cmd_set = P_ID_INTEL_STD, - .nr_regions = 1, +@@ -120,7 +120,7 @@ + #define PM49FL008 0x006A + + /* Sharp */ +-#define LH28F640BF 0x00b0 ++#define LH28F640BF 0x00B0 + + /* ST - www.st.com */ + #define M29F800AB 0x0058 +@@ -1299,13 +1299,14 @@ + .mfr_id = CFI_MFR_SHARP, + .dev_id = LH28F640BF, + .name = "LH28F640BF", +- .devtypes = CFI_DEVICETYPE_X8, ++ .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, +- .dev_size = SIZE_4MiB, +- .cmd_set = P_ID_INTEL_STD, +- .nr_regions = 1, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_INTEL_EXT, ++ .nr_regions = 2, .regions = { - ERASEINFO(0x40000,16), -+ ERASEINFO(0x08000,128), ++ ERASEINFO(0x10000, 127), ++ ERASEINFO(0x02000, 8), } }, { .mfr_id = CFI_MFR_SST,
recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/collie/collie-kexecboot.cfg +2 -2
@@ -483,8 +483,8 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set # CONFIG_MTD_CFI_I1 is not set -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y
Signature · 1 line
1.7.12.4
PATCH 4/5 linux-yocto-3.4: remove temporary version. Replace with 3.8
In reply to Andrea Adami* this version was initially used to split the config
* but has been rapidly superseded by 3.6 and now 3.8
--- .../linux/linux-yocto-3.4/akita/akita-standard.scc | 7 - .../linux/linux-yocto-3.4/akita/akita.cfg | 4 - .../linux/linux-yocto-3.4/akita/akita.scc | 11 - .../linux/linux-yocto-3.4/c7x0/c7x0-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg | 57 --- recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc | 10 - .../linux-yocto-3.4/collie/collie-standard.scc | 7 - .../linux/linux-yocto-3.4/collie/collie.cfg | 86 ----- .../linux/linux-yocto-3.4/collie/collie.scc | 5 - .../linux/linux-yocto-3.4/feature-top.scc | 1 - .../linux-yocto-3.4/locomo_kbd_tweak-r2.patch | 80 ---- .../linux-yocto-3.4/poodle/poodle-standard.scc | 7 - .../linux/linux-yocto-3.4/poodle/poodle.cfg | 62 ---- .../linux/linux-yocto-3.4/poodle/poodle.scc | 10 - .../linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch | 40 -- .../linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/sharpsl_param.patch | 24 -- .../linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch | 34 -- .../linux/linux-yocto-3.4/spitz/spitz-standard.scc | 7 - .../linux/linux-yocto-3.4/spitz/spitz.cfg | 67 ---- .../linux/linux-yocto-3.4/spitz/spitz.scc | 10 - .../linux/linux-yocto-3.4/spitz_pm.patch | 53 --- .../linux/linux-yocto-3.4/tosa/tosa-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg | 62 ---- recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc | 10 - .../linux/linux-yocto-3.4/zaurus-common.scc | 10 - .../linux/linux-yocto-3.4/zaurus-hardware.cfg | 279 -------------- .../linux/linux-yocto-3.4/zaurus-non-hardware.cfg | 401 --------------------- .../linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg | 9 - .../linux/linux-yocto-3.4/zaurus-pxa-common.cfg | 98 ----- .../linux/linux-yocto-3.4/zaurus-pxa-only.scc | 2 - .../linux/linux-yocto-3.4/zaurus-usb-host.scc | 6 - .../linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg | 4 - .../linux/linux-yocto-3.4/zaurus-usb-ohci.cfg | 110 ------ recipes-kernel/linux/linux-yocto_3.4.bbappend | 54 --- 36 files changed, 1699 deletions(-) delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/feature-top.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/locomo_kbd_tweak-r2.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/sharpsl_param.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz_pm.patch delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-common.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-non-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-only.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-host.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci.cfg delete mode 100644 recipes-kernel/linux/linux-yocto_3.4.bbappend
recipes-kernel/linux/linux-yocto-3.4/akita/akita-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE akita -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include akita.scc
recipes-kernel/linux/linux-yocto-3.4/akita/akita.cfg deleted +0 -4
@@ -1,4 +0,0 @@ -# -# System Type -# -CONFIG_GPIO_PCA953X=y
recipes-kernel/linux/linux-yocto-3.4/akita/akita.scc deleted +0 -11
@@ -1,11 +0,0 @@ -kconf hardware ../spitz/spitz.cfg -kconf hardware akita.cfg - -include ../zaurus-pxa-only.scc -include ../zaurus-common.scc -include ../zaurus-usb-host.scc - -patch sharpsl_param.patch -patch spitz_pm.patch -patch pxa27x-sa1100-rtc.patch -patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE c7x0 -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include c7x0.scc
recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg deleted +0 -57
57 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc deleted +0 -10
@@ -1,10 +0,0 @@ -kconf hardware c7x0.cfg - -include ../zaurus-pxa-only.scc -include ../zaurus-common.scc - -patch sharpsl_param.patch -patch pxa25x-gpio-wakeup.patch -patch pxa25x-sa1100-rtc.patch -patch spi-pxa2xx-fix-mem.patch -
recipes-kernel/linux/linux-yocto-3.4/collie/collie-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE collie -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include collie.scc
recipes-kernel/linux/linux-yocto-3.4/collie/collie.cfg deleted +0 -86
86 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/collie/collie.scc deleted +0 -5
@@ -1,5 +0,0 @@ -kconf hardware collie.cfg - -include ../zaurus-common.scc - -patch locomo_kbd_tweak-r2.patch
recipes-kernel/linux/linux-yocto-3.4/feature-top.scc deleted +0 -1
@@ -1 +0,0 @@ -# placeholder
recipes-kernel/linux/linux-yocto-3.4/locomo_kbd_tweak-r2.patch deleted +0 -80
80 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/poodle/poodle-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE poodle -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include poodle.scc
recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.cfg deleted +0 -62
62 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.scc deleted +0 -10
@@ -1,10 +0,0 @@ -kconf hardware poodle.cfg - -include ../zaurus-pxa-only.scc -include ../zaurus-common.scc - -patch locomo_kbd_tweak-r2.patch -patch sharpsl_param.patch -patch pxa25x-gpio-wakeup.patch -patch pxa25x-sa1100-rtc.patch -patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch deleted +0 -40
@@ -1,40 +0,0 @@ -From d406628a734b1b852bf08cac31d95fcd73cf797f Mon Sep 17 00:00:00 2001 -From: Andrea Adami <[email protected]> -Date: Sat, 17 Nov 2012 01:04:07 +0100 -Subject: [PATCH 1/1] ARM: pxa: fix pxa25x gpio wakeup setting - -* Since 3.3 gpio wakeup is broken on pxa25x (tested on corgi and poodle). -* Use gpio_set_wake like done for pxa27x with commit id -* b95ace54a23e2f8ebb032744cebb17c9f43bf651 - -Signed-off-by: Andrea Adami <[email protected]> ---- - arch/arm/mach-pxa/pxa25x.c | 5 +++++ - 1 files changed, 5 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c -index 3352b37..aeb913e 100644 ---- a/arch/arm/mach-pxa/pxa25x.c -+++ b/arch/arm/mach-pxa/pxa25x.c -@@ -338,6 +338,10 @@ void __init pxa25x_map_io(void) - pxa25x_get_clk_frequency_khz(1); - } - -+static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { -+ .gpio_set_wake = gpio_set_wake, -+}; -+ - static struct platform_device *pxa25x_devices[] __initdata = { - &pxa25x_device_udc, - &pxa_device_pmu, -@@ -370,6 +374,7 @@ static int __init pxa25x_init(void) - register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa2xx_clock_syscore_ops); - -+ pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); - ret = platform_add_devices(pxa25x_devices, - ARRAY_SIZE(pxa25x_devices)); - if (ret) --- -1.7.8.6 -
recipes-kernel/linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch deleted +0 -29
@@ -1,29 +0,0 @@ -From 40cea1b97cdc69b70d465f2b3a298eb46020a947 Mon Sep 17 00:00:00 2001 -From: Andrea Adami <[email protected]> -Date: Thu, 22 Nov 2012 23:16:21 +0100 -Subject: [PATCH] ARM: pxa: pxa25x.c: add dummy SA1100 rtc clock - -* fix failure seen on Zaurus corgi: -* sa1100-rtc sa1100-rtc: failed to find rtc clock source -* sa1100-rtc: probe of sa1100-rtc failed with error -2 - -Signed-off-by: Andrea Adami <[email protected]> ---- - arch/arm/mach-pxa/pxa25x.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c -index 3352b37..0f05671 100644 ---- a/arch/arm/mach-pxa/pxa25x.c -+++ b/arch/arm/mach-pxa/pxa25x.c -@@ -209,6 +209,7 @@ static struct clk_lookup pxa25x_clkregs[] = { - INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), - INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), -+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), - }; - - static struct clk_lookup pxa25x_hwuart_clkreg = --- -1.7.8.6 -
recipes-kernel/linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch deleted +0 -29
@@ -1,29 +0,0 @@ -From fcee0050f8ce5296e8007ed7ed17d98f334a8f38 Mon Sep 17 00:00:00 2001 -From: Andrea Adami <[email protected]> -Date: Fri, 23 Nov 2012 23:07:20 +0100 -Subject: [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock - -* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100. -* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1 -* to /dev/rtc according to your requirement. - -Signed-off-by: Andrea Adami <[email protected]> ---- - arch/arm/mach-pxa/pxa27x.c | 1 + - 1 files changed, 1 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c -index 8047ee0..5970ebc 100644 ---- a/arch/arm/mach-pxa/pxa27x.c -+++ b/arch/arm/mach-pxa/pxa27x.c -@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = { - INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), - INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), -+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), - }; - - #ifdef CONFIG_PM --- -1.7.8.6 -
recipes-kernel/linux/linux-yocto-3.4/sharpsl_param.patch deleted +0 -24
@@ -1,24 +0,0 @@ -Signed-off-by: Marko Katic <dromede.gmail.com> - -diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c -index d56c932..b70b13a 100644 ---- a/arch/arm/common/sharpsl_param.c -+++ b/arch/arm/common/sharpsl_param.c -@@ -14,6 +14,7 @@ - #include <linux/kernel.h> - #include <linux/module.h> - #include <linux/string.h> -+#include <asm/memory.h> - #include <asm/mach/sharpsl_param.h> - - /* -@@ -41,7 +42,8 @@ EXPORT_SYMBOL(sharpsl_param); - - void sharpsl_save_param(void) - { -- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info)); -+ void * param_start = phys_to_virt(PARAM_BASE); -+ memcpy(&sharpsl_param, param_start, sizeof(struct sharpsl_param_info)); - - if (sharpsl_param.comadj_keyword != COMADJ_MAGIC) - sharpsl_param.comadj=-1;
recipes-kernel/linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch deleted +0 -34
@@ -1,34 +0,0 @@ -diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c -index dc25bee..b25fe27 100644 ---- a/drivers/spi/spi-pxa2xx.c -+++ b/drivers/spi/spi-pxa2xx.c -@@ -106,6 +106,7 @@ struct driver_data { - int rx_channel; - int tx_channel; - u32 *null_dma_buf; -+ u8 null_dma_buf_unaligned[16]; - - /* SSP register addresses */ - void __iomem *ioaddr; -@@ -1543,8 +1544,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) - return -ENODEV; - } - -- /* Allocate master with space for drv_data and null dma buffer */ -- master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); -+ /* Allocate master with space for drv_data */ -+ master = spi_alloc_master(dev, sizeof(struct driver_data)); - if (!master) { - dev_err(&pdev->dev, "cannot alloc spi_master\n"); - pxa_ssp_free(ssp); -@@ -1569,8 +1570,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) - master->transfer = transfer; - - drv_data->ssp_type = ssp->type; -- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + -- sizeof(struct driver_data)), 8); -+ drv_data->null_dma_buf = -+ (u32 *)PTR_ALIGN(&drv_data->null_dma_buf_unaligned, 8); - - drv_data->ioaddr = ssp->mmio_base; - drv_data->ssdr_physical = ssp->phys_base + SSDR;
recipes-kernel/linux/linux-yocto-3.4/spitz/spitz-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE spitz -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include spitz.scc
recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.cfg deleted +0 -67
67 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.scc deleted +0 -10
@@ -1,10 +0,0 @@ -kconf hardware spitz.cfg - -include ../zaurus-pxa-only.scc -include ../zaurus-common.scc -include ../zaurus-usb-host.scc - -patch sharpsl_param.patch -patch spitz_pm.patch -patch pxa27x-sa1100-rtc.patch -patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.4/spitz_pm.patch deleted +0 -53
53 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/tosa/tosa-standard.scc deleted +0 -7
@@ -1,7 +0,0 @@ -define KMACHINE tosa -define KTYPE standard -define KARCH arm - -include ktypes/standard/standard.scc - -include tosa.scc
recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg deleted +0 -62
62 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc deleted +0 -10
@@ -1,10 +0,0 @@ -kconf hardware tosa.cfg - -include ../zaurus-pxa-only.scc -include ../zaurus-common.scc -include ../zaurus-usb-host.scc - -patch sharpsl_param.patch -patch pxa25x-gpio-wakeup.patch -patch pxa25x-sa1100-rtc.patch -patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.4/zaurus-common.scc deleted +0 -10
@@ -1,10 +0,0 @@ -kconf hardware zaurus-hardware.cfg -kconf non-hardware zaurus-non-hardware.cfg - -include cfg/fs/flash_fs.scc -include cfg/serial-8250.cfg -include cfg/sound.scc - -include features/scsi/disk.scc -include features/hostapd/hostapd.scc -include features/mac80211/mac80211.scc
recipes-kernel/linux/linux-yocto-3.4/zaurus-hardware.cfg deleted +0 -279
279 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/zaurus-non-hardware.cfg deleted +0 -401
401 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg deleted +0 -9
@@ -1,9 +0,0 @@ -# -# Microsoft Hyper-V guest support -# -CONFIG_CLKDEV_LOOKUP=y - -# -# End-user Products (sorted by vendor name) -# -CONFIG_PXA_SSP=y
recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common.cfg deleted +0 -98
98 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-only.scc deleted +0 -2
@@ -1,2 +0,0 @@ -kconf hardware zaurus-pxa-common.cfg -kconf non-hardware zaurus-pxa-common-non-hw.cfg
recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-host.scc deleted +0 -6
@@ -1,6 +0,0 @@ -kconf hardware zaurus-usb-ohci.cfg -kconf non-hardware zaurus-usb-ohci-non-hw.cfg - -include features/usb/ohci-hcd.scc -include features/usb-net/usb-net.scc -#include cfg/usb-mass-storage.scc
recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg deleted +0 -4
@@ -1,4 +0,0 @@ -# -# Console display driver support -# -CONFIG_SND_RAWMIDI_SEQ=m
recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci.cfg deleted +0 -110
110 lines not on this page · raw message
recipes-kernel/linux/linux-yocto_3.4.bbappend deleted +0 -54
54 lines not on this page · raw message
Signature · 1 line
1.7.12.4
PATCH 5/5 linux-yocto_3.8: initial commit for Zaurus devices
In reply to Andrea Adami* NOTE about collie
* collie can be only booted with serial cable
* because framebuffer is still borked.
* Collie is still lacking the spi_locomo for boot from MMC/SD *
* Most patches have been taken from previous version or from
* LAKML
--- .../linux/linux-yocto-3.8/akita/akita-standard.scc | 7 + .../linux/linux-yocto-3.8/akita/akita.cfg | 4 + .../linux/linux-yocto-3.8/akita/akita.scc | 11 + .../linux/linux-yocto-3.8/c7x0/c7x0-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg | 52 +++ recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 8 + .../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 ++ .../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 + .../linux-yocto-3.8/collie/collie-standard.scc | 7 + .../linux/linux-yocto-3.8/collie/collie.cfg | 118 ++++++ .../linux/linux-yocto-3.8/collie/collie.scc | 8 + .../linux/linux-yocto-3.8/feature-top.scc | 1 + .../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ++++ .../linux/linux-yocto-3.8/mcp-device.patch | 13 + .../linux-yocto-3.8/poodle/poodle-standard.scc | 7 + .../linux/linux-yocto-3.8/poodle/poodle.cfg | 57 +++ .../linux/linux-yocto-3.8/poodle/poodle.scc | 8 + .../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ++ .../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ++ .../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ++ .../linux/linux-yocto-3.8/spitz/spitz-standard.scc | 7 + .../linux/linux-yocto-3.8/spitz/spitz.cfg | 61 ++++ .../linux/linux-yocto-3.8/spitz/spitz.scc | 10 + .../linux/linux-yocto-3.8/spitz_pm.patch | 53 +++ .../linux/linux-yocto-3.8/tosa/tosa-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg | 57 +++ recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 8 + .../linux/linux-yocto-3.8/zaurus-common.scc | 10 + .../linux/linux-yocto-3.8/zaurus-hardware.cfg | 279 ++++++++++++++ .../linux/linux-yocto-3.8/zaurus-non-hardware.cfg | 400 +++++++++++++++++++++ .../linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg | 9 + .../linux/linux-yocto-3.8/zaurus-pxa-common.cfg | 111 ++++++ .../linux/linux-yocto-3.8/zaurus-pxa-only.scc | 2 + .../linux/linux-yocto-3.8/zaurus-usb-host.scc | 6 + .../linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg | 4 + .../linux/linux-yocto-3.8/zaurus-usb-ohci.cfg | 110 ++++++ recipes-kernel/linux/linux-yocto_3.8.bbappend | 54 +++ 37 files changed, 1705 insertions(+) create mode 100644 recipes-kernel/linux/linux-yocto-3.8/REGULATORS create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/feature-top.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg create mode 100644 recipes-kernel/linux/linux-yocto_3.8.bbappend
recipes-kernel/linux/linux-yocto-3.8/REGULATORS new file +0 -0
recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE akita +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include akita.scc
recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg new file +4 -0
@@ -0,0 +1,4 @@ +# +# System Type +# +CONFIG_GPIO_PCA953X=y
recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc new file +11 -0
@@ -0,0 +1,11 @@ +kconf hardware ../spitz/spitz.cfg +kconf hardware akita.cfg + +include ../zaurus-pxa-only.scc +include ../zaurus-common.scc +include ../zaurus-usb-host.scc + +patch sharpsl_param.patch +patch spitz_pm.patch +patch pxa27x-sa1100-rtc.patch +patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE c7x0 +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include c7x0.scc
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg new file +52 -0
52 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc new file +8 -0
@@ -0,0 +1,8 @@ +kconf hardware c7x0.cfg + +include ../zaurus-pxa-only.scc +include ../zaurus-common.scc + +patch sharpsl_param.patch +patch spi-pxa2xx-fix-mem.patch +
recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patch new file +31 -0
@@ -0,0 +1,31 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -120,7 +120,7 @@ + #define PM49FL008 0x006A + + /* Sharp */ +-#define LH28F640BF 0x00b0 ++#define LH28F640BF 0x00B0 + + /* ST - www.st.com */ + #define M29F800AB 0x0058 +@@ -1299,13 +1299,14 @@ + .mfr_id = CFI_MFR_SHARP, + .dev_id = LH28F640BF, + .name = "LH28F640BF", +- .devtypes = CFI_DEVICETYPE_X8, ++ .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, +- .dev_size = SIZE_4MiB, +- .cmd_set = P_ID_INTEL_STD, +- .nr_regions = 1, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_INTEL_EXT, ++ .nr_regions = 2, + .regions = { +- ERASEINFO(0x40000,16), ++ ERASEINFO(0x10000, 127), ++ ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_SST,
recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patch new file +11 -0
@@ -0,0 +1,11 @@ +--- a/arch/arm/mach-sa1100/collie.c ++++ b/arch/arm/mach-sa1100/collie.c +@@ -289,7 +289,7 @@ + } + + static struct flash_platform_data collie_flash_data = { +- .map_name = "cfi_probe", ++ .map_name = "jedec_probe", + .init = collie_flash_init, + .set_vpp = collie_set_vpp, + .exit = collie_flash_exit,
recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE collie +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include collie.scc
recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg new file +118 -0
118 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc new file +8 -0
@@ -0,0 +1,8 @@ +kconf hardware collie.cfg + +include ../zaurus-common.scc + +patch locomo_kbd_tweak-r2.patch +patch mcp-device.patch +patch collie-jedec-probe.patch +patch collie-eraseinfo.patch
recipes-kernel/linux/linux-yocto-3.8/feature-top.scc new file +1 -0
@@ -0,0 +1 @@ +# placeholder
recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patch new file +75 -0
75 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/mcp-device.patch new file +13 -0
@@ -0,0 +1,13 @@ +--- a/include/linux/mfd/mcp.h 2013-02-18 00:14:09.000000000 +0100 ++++ b/include/linux/mfd/mcp.h 2013-02-17 23:55:52.000000000 +0100 +@@ -10,6 +10,8 @@ + #ifndef MCP_H + #define MCP_H + ++#include <linux/device.h> ++ + struct mcp_ops; + + struct mcp { + +
recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE poodle +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include poodle.scc
recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg new file +57 -0
57 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc new file +8 -0
@@ -0,0 +1,8 @@ +kconf hardware poodle.cfg + +include ../zaurus-pxa-only.scc +include ../zaurus-common.scc + +patch locomo_kbd_tweak-r2.patch +patch sharpsl_param.patch +patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch new file +34 -0
@@ -0,0 +1,34 @@ +From fcee0050f8ce5296e8007ed7ed17d98f334a8f38 Mon Sep 17 00:00:00 2001 +From: Andrea Adami <[email protected]> +Date: Fri, 23 Nov 2012 23:07:20 +0100 +Subject: [PATCH] ARM: pxa: pxa27x.c: add dummy SA1100 rtc clock + +* Using pxa27x you could now build both RTC_DRV_PXA and RTC_DRV_SA1100. +* Make sure you don't use both together: link /dev/rtc0 or /dev/rtc1 +* to /dev/rtc according to your requirement. + +Signed-off-by: Andrea Adami <[email protected]> +Acked-by: Robert Jarzmik <[email protected]> +Signed-off-by: Haojian Zhuang <[email protected]> + +Upstream-Status: Accepted. Committed in v3.9-rc1 +with commit id 495b21dc0e488b784ab1d4007d00db1ca2a95c98 +--- + arch/arm/mach-pxa/pxa27x.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c +index 8047ee0..5970ebc 100644 +--- a/arch/arm/mach-pxa/pxa27x.c ++++ b/arch/arm/mach-pxa/pxa27x.c +@@ -230,6 +230,7 @@ static struct clk_lookup pxa27x_clkregs[] = { + INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), + INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), ++ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), + }; + + #ifdef CONFIG_PM +-- +1.7.8.6 +
recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patch new file +24 -0
@@ -0,0 +1,24 @@ +Signed-off-by: Marko Katic <dromede.gmail.com> + +diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c +index d56c932..b70b13a 100644 +--- a/arch/arm/common/sharpsl_param.c ++++ b/arch/arm/common/sharpsl_param.c +@@ -14,6 +14,7 @@ + #include <linux/kernel.h> + #include <linux/module.h> + #include <linux/string.h> ++#include <asm/memory.h> + #include <asm/mach/sharpsl_param.h> + + /* +@@ -41,7 +42,8 @@ EXPORT_SYMBOL(sharpsl_param); + + void sharpsl_save_param(void) + { +- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info)); ++ void * param_start = phys_to_virt(PARAM_BASE); ++ memcpy(&sharpsl_param, param_start, sizeof(struct sharpsl_param_info)); + + if (sharpsl_param.comadj_keyword != COMADJ_MAGIC) + sharpsl_param.comadj=-1;
recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch new file +34 -0
@@ -0,0 +1,34 @@ +diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c +index dc25bee..b25fe27 100644 +--- a/drivers/spi/spi-pxa2xx.c ++++ b/drivers/spi/spi-pxa2xx.c +@@ -106,6 +106,7 @@ struct driver_data { + int rx_channel; + int tx_channel; + u32 *null_dma_buf; ++ u8 null_dma_buf_unaligned[16]; + + /* SSP register addresses */ + void __iomem *ioaddr; +@@ -1543,8 +1544,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) + return -ENODEV; + } + +- /* Allocate master with space for drv_data and null dma buffer */ +- master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); ++ /* Allocate master with space for drv_data */ ++ master = spi_alloc_master(dev, sizeof(struct driver_data)); + if (!master) { + dev_err(&pdev->dev, "cannot alloc spi_master\n"); + pxa_ssp_free(ssp); +@@ -1569,8 +1570,8 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) + master->transfer = transfer; + + drv_data->ssp_type = ssp->type; +- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + +- sizeof(struct driver_data)), 8); ++ drv_data->null_dma_buf = ++ (u32 *)PTR_ALIGN(&drv_data->null_dma_buf_unaligned, 8); + + drv_data->ioaddr = ssp->mmio_base; + drv_data->ssdr_physical = ssp->phys_base + SSDR;
recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE spitz +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include spitz.scc
recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg new file +61 -0
61 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc new file +10 -0
@@ -0,0 +1,10 @@ +kconf hardware spitz.cfg + +include ../zaurus-pxa-only.scc +include ../zaurus-common.scc +include ../zaurus-usb-host.scc + +patch sharpsl_param.patch +patch spitz_pm.patch +patch pxa27x-sa1100-rtc.patch +patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch new file +53 -0
53 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc new file +7 -0
@@ -0,0 +1,7 @@ +define KMACHINE tosa +define KTYPE standard +define KARCH arm + +include ktypes/standard/standard.scc + +include tosa.scc
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg new file +57 -0
57 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc new file +8 -0
@@ -0,0 +1,8 @@ +kconf hardware tosa.cfg + +include ../zaurus-pxa-only.scc +include ../zaurus-common.scc +include ../zaurus-usb-host.scc + +patch sharpsl_param.patch +patch spi-pxa2xx-fix-mem.patch
recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc new file +10 -0
@@ -0,0 +1,10 @@ +kconf hardware zaurus-hardware.cfg +kconf non-hardware zaurus-non-hardware.cfg + +include cfg/fs/flash_fs.scc +include cfg/serial-8250.cfg +include cfg/sound.scc + +include features/scsi/disk.scc +include features/hostapd/hostapd.scc +include features/mac80211/mac80211.scc
recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg new file +279 -0
279 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg new file +400 -0
400 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg new file +9 -0
@@ -0,0 +1,9 @@ +# +# Microsoft Hyper-V guest support +# +CONFIG_CLKDEV_LOOKUP=y + +# +# End-user Products (sorted by vendor name) +# +CONFIG_PXA_SSP=y
recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg new file +111 -0
111 lines not on this page · raw message
recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc new file +2 -0
@@ -0,0 +1,2 @@ +kconf hardware zaurus-pxa-common.cfg +kconf non-hardware zaurus-pxa-common-non-hw.cfg
recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc new file +6 -0
@@ -0,0 +1,6 @@ +kconf hardware zaurus-usb-ohci.cfg +kconf non-hardware zaurus-usb-ohci-non-hw.cfg + +include features/usb/ohci-hcd.scc +include features/usb-net/usb-net.scc +#include cfg/usb-mass-storage.scc
recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg new file +4 -0
@@ -0,0 +1,4 @@ +# +# Console display driver support +# +CONFIG_SND_RAWMIDI_SEQ=m
recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg new file +110 -0
110 lines not on this page · raw message
recipes-kernel/linux/linux-yocto_3.8.bbappend new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
1.7.12.4
Paul Eggleton
AppliedQuoted 177 lines · On Monday 18 March 2013 00:17:13 Andrea Adami wrote:
* hack again around collie flash, Read-Only until proper CFI detection
* introduce kernel 3.8 for all Zaurus, withDEFAULT_PREFERENCE-1Andrea Adami (5):
linux-yocto-tiny-kexecboot: add patch fixing mtd on SL-C3200 linux-yocto_3.2: match the exact NOR on collie linux-yocto-tiny-kexecboot_3.2: match the exact NOR on collie linux-yocto-3.4: remove temporary version. Replace with 3.8 linux-yocto_3.8: initial commit for Zaurus devices.../linux-yocto-3.2/collie/collie-eraseinfo.patch | 28 +- .../linux/linux-yocto-3.2/collie/collie.cfg | 4 +- .../linux/linux-yocto-3.4/akita/akita-standard.scc | 7 - .../linux/linux-yocto-3.4/akita/akita.cfg | 4 - .../linux/linux-yocto-3.4/akita/akita.scc | 11 - .../linux/linux-yocto-3.4/c7x0/c7x0-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg | 57 --- recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc | 10 - .../linux-yocto-3.4/collie/collie-standard.scc | 7 - .../linux/linux-yocto-3.4/collie/collie.cfg | 86 ----- .../linux/linux-yocto-3.4/collie/collie.scc | 5 - .../linux/linux-yocto-3.4/feature-top.scc | 1 - .../linux-yocto-3.4/locomo_kbd_tweak-r2.patch | 80 ---- .../linux-yocto-3.4/poodle/poodle-standard.scc | 7 - .../linux/linux-yocto-3.4/poodle/poodle.cfg | 62 ---- .../linux/linux-yocto-3.4/poodle/poodle.scc | 10 - .../linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patch | 40 -- .../linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patch | 29 -- .../linux/linux-yocto-3.4/sharpsl_param.patch | 24 -- .../linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patch | 34 -- .../linux/linux-yocto-3.4/spitz/spitz-standard.scc | 7 - .../linux/linux-yocto-3.4/spitz/spitz.cfg | 67 ---- .../linux/linux-yocto-3.4/spitz/spitz.scc | 10 - .../linux/linux-yocto-3.4/spitz_pm.patch | 53 --- .../linux/linux-yocto-3.4/tosa/tosa-standard.scc | 7 - recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg | 62 ---- recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc | 10 - .../linux/linux-yocto-3.4/zaurus-common.scc | 10 - .../linux/linux-yocto-3.4/zaurus-hardware.cfg | 279 -------------- .../linux/linux-yocto-3.4/zaurus-non-hardware.cfg | 401 --------------------- .../linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg | 9 - .../linux/linux-yocto-3.4/zaurus-pxa-common.cfg | 98 ----- .../linux/linux-yocto-3.4/zaurus-pxa-only.scc | 2 - .../linux/linux-yocto-3.4/zaurus-usb-host.scc | 6 - .../linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg | 4 - .../linux/linux-yocto-3.4/zaurus-usb-ohci.cfg | 110 ------ .../linux/linux-yocto-3.8/akita/akita-standard.scc | 7 + .../linux/linux-yocto-3.8/akita/akita.cfg | 4 + .../linux/linux-yocto-3.8/akita/akita.scc | 11 + .../linux/linux-yocto-3.8/c7x0/c7x0-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg | 52 +++ recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 8 + .../linux/linux-yocto-3.8/collie-eraseinfo.patch | 31 ++ .../linux/linux-yocto-3.8/collie-jedec-probe.patch | 11 + .../linux-yocto-3.8/collie/collie-standard.scc | 7 + .../linux/linux-yocto-3.8/collie/collie.cfg | 118 ++++++ .../linux/linux-yocto-3.8/collie/collie.scc | 8 + .../linux/linux-yocto-3.8/feature-top.scc | 1 + .../linux-yocto-3.8/locomo_kbd_tweak-r2.patch | 75 ++++ .../linux/linux-yocto-3.8/mcp-device.patch | 13 + .../linux-yocto-3.8/poodle/poodle-standard.scc | 7 + .../linux/linux-yocto-3.8/poodle/poodle.cfg | 57 +++ .../linux/linux-yocto-3.8/poodle/poodle.scc | 8 + .../linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patch | 34 ++ .../linux/linux-yocto-3.8/sharpsl_param.patch | 24 ++ .../linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patch | 34 ++ .../linux/linux-yocto-3.8/spitz/spitz-standard.scc | 7 + .../linux/linux-yocto-3.8/spitz/spitz.cfg | 61 ++++ .../linux/linux-yocto-3.8/spitz/spitz.scc | 10 + .../linux/linux-yocto-3.8/spitz_pm.patch | 53 +++ .../linux/linux-yocto-3.8/tosa/tosa-standard.scc | 7 + recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg | 57 +++ recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 8 + .../linux/linux-yocto-3.8/zaurus-common.scc | 10 + .../linux/linux-yocto-3.8/zaurus-hardware.cfg | 279 ++++++++++++++ .../linux/linux-yocto-3.8/zaurus-non-hardware.cfg | 400 ++++++++++++++++++++ .../linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg | 9 + .../linux/linux-yocto-3.8/zaurus-pxa-common.cfg | 111 ++++++ .../linux/linux-yocto-3.8/zaurus-pxa-only.scc | 2 + .../linux/linux-yocto-3.8/zaurus-usb-host.scc | 6 + .../linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg | 4 + .../linux/linux-yocto-3.8/zaurus-usb-ohci.cfg | 110 ++++++ .../collie/collie-eraseinfo.patch | 28 +- .../collie/collie-kexecboot.cfg | 4 +- .../spitz/3200-mtd.patch | 13 + recipes-kernel/linux/linux-yocto_3.4.bbappend | 54 --- recipes-kernel/linux/linux-yocto_3.8.bbappend | 54 +++ 78 files changed, 1770 insertions(+), 1711 deletions(-) delete mode 100644recipes-kernel/linux/linux-yocto-3.4/akita/akita-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/akita/akita.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/c7x0/c7x0.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/collie/collie.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/feature-top.scc delete mode 100644
recipes-kernel/linux/linux-yocto-3.4/locomo_kbd_tweak-r2.patchdelete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/poodle/poodle.scc delete mode 100644recipes-kernel/linux/linux-yocto-3.4/pxa25x-gpio-wakeup.patchdelete mode 100644recipes-kernel/linux/linux-yocto-3.4/pxa25x-sa1100-rtc.patchdelete mode 100644recipes-kernel/linux/linux-yocto-3.4/pxa27x-sa1100-rtc.patchdelete mode 100644recipes-kernel/linux/linux-yocto-3.4/sharpsl_param.patchdelete mode 100644recipes-kernel/linux/linux-yocto-3.4/spi-pxa2xx-fix-mem.patchdelete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/spitz/spitz.scc delete mode 100644recipes-kernel/linux/linux-yocto-3.4/spitz_pm.patchdelete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa-standard.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/tosa/tosa.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-common.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-non-hardware.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-common.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-pxa-only.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-host.scc delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci-non-hw.cfg delete mode 100644 recipes-kernel/linux/linux-yocto-3.4/zaurus-usb-ohci.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/REGULATORS create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc create mode 100644recipes-kernel/linux/linux-yocto-3.8/collie-eraseinfo.patchcreate mode 100644recipes-kernel/linux/linux-yocto-3.8/collie-jedec-probe.patchcreate mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/collie/collie.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/feature-top.scc create mode 100644recipes-kernel/linux/linux-yocto-3.8/locomo_kbd_tweak-r2.patchcreate mode 100644recipes-kernel/linux/linux-yocto-3.8/mcp-device.patchcreate mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc create mode 100644recipes-kernel/linux/linux-yocto-3.8/pxa27x-sa1100-rtc.patchcreate mode 100644recipes-kernel/linux/linux-yocto-3.8/sharpsl_param.patchcreate mode 100644recipes-kernel/linux/linux-yocto-3.8/spi-pxa2xx-fix-mem.patchcreate mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc create mode 100644recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patchcreate mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa-standard.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-common.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-non-hardware.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-common.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-pxa-only.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-host.scc create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci-non-hw.cfg create mode 100644 recipes-kernel/linux/linux-yocto-3.8/zaurus-usb-ohci.cfg create mode 100644recipes-kernel/linux/linux-yocto-tiny-kexecboot-3.2/spitz/3200-mtd.patchdelete mode 100644 recipes-kernel/linux/linux-yocto_3.4.bbappend
Quoted 1 line
create mode 100644 recipes-kernel/linux/linux-yocto_3.8.bbappend
Merged, thanks!
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre