CPUFreq: Move drivers to drivers/cpufreq - Part 2
Subsystems (7)
Viresh Kumar
maintainercover CPUFreq: Move drivers to drivers/cpufreq - Part 2
Hi,
This is the second patchset toward migrating all cpufreq drivers to drivers/cpufreq (Earlier one was for ARM drivers).
These are all applied here:
http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers
They aren't tested, not even compilation.
Viresh Kumar (9):
AVR32: cpufreq: move cpufreq driver to drivers/cpufreq
blackfin: cpufreq: move cpufreq driver to drivers/cpufreq
cris: cpufreq: move cpufreq driver to drivers/cpufreq ia64: cpufreq: move cpufreq driver to drivers/cpufreq mips: cpufreq: move cpufreq driver to drivers/cpufreq
sh: cpufreq: move cpufreq driver to drivers/cpufreq
unicore2: cpufreq: move cpufreq driver to drivers/cpufreq
spark: cpufreq: move cpufreq driver to drivers/cpufreq
powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
arch/avr32/Kconfig | 13 ----
arch/avr32/configs/atngw100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +-
arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +-
arch/avr32/configs/atngw100_mrmt_defconfig | 2 +-
arch/avr32/configs/atngw100mkii_defconfig | 2 +-
.../avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +-
.../avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +-
arch/avr32/configs/atstk1002_defconfig | 2 +-
arch/avr32/configs/atstk1003_defconfig | 2 +-
arch/avr32/configs/atstk1004_defconfig | 2 +-
arch/avr32/configs/atstk1006_defconfig | 2 +-
arch/avr32/configs/favr-32_defconfig | 2 +-
arch/avr32/configs/hammerhead_defconfig | 2 +-
arch/avr32/configs/mimc200_defconfig | 2 +-
arch/avr32/mach-at32ap/Makefile | 1 -
arch/blackfin/mach-common/Makefile | 1 -
arch/cris/arch-v32/mach-a3/Makefile | 1 -
arch/cris/arch-v32/mach-fs/Makefile | 1 -
arch/ia64/Kconfig | 5 +-
arch/ia64/kernel/Makefile | 1 -
arch/ia64/kernel/cpufreq/Kconfig | 29 -------
arch/ia64/kernel/cpufreq/Makefile | 2 -
arch/mips/Kconfig | 9 ++-
arch/mips/kernel/Makefile | 2 -
arch/mips/kernel/cpufreq/Kconfig | 41 ----------
arch/mips/kernel/cpufreq/Makefile | 5 --
arch/powerpc/platforms/Kconfig | 31 --------
arch/powerpc/platforms/pasemi/Makefile | 1 -
arch/powerpc/platforms/powermac/Makefile | 2 -
arch/sh/Kconfig | 18 -----
arch/sh/kernel/Makefile | 1 -
arch/sparc/Kconfig | 23 ------
arch/sparc/kernel/Makefile | 3 -
arch/unicore32/kernel/Makefile | 1 -
drivers/cpufreq/Kconfig | 89 ++++++++++++++++++++++
drivers/cpufreq/Kconfig.powerpc | 26 +++++++
drivers/cpufreq/Makefile | 16 ++++
.../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0
.../cpufreq/blackfin-cpufreq.c | 0
.../cpufreq/cris-artpec3-cpufreq.c | 0
.../cpufreq/cris-etraxfs-cpufreq.c | 0
.../cpufreq/ia64-acpi-cpufreq.c | 1 -
.../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
.../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0
.../cpufreq/pmac32-cpufreq.c | 0
.../cpufreq/pmac64-cpufreq.c | 0
.../cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 -
.../cpufreq/spark-us2e-cpufreq.c | 0
.../cpufreq/spark-us3-cpufreq.c | 0
.../cpufreq/unicore2-cpufreq.c | 2 +-
51 files changed, 156 insertions(+), 199 deletions(-)
delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig
delete mode 100644 arch/ia64/kernel/cpufreq/Makefile
delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
delete mode 100644 arch/mips/kernel/cpufreq/Makefile
rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%)
rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%)
rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/spark-us2e-cpufreq.c (100%)
rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/spark-us3-cpufreq.c (100%)
rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 1/9 AVR32: cpufreq: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq.
--- arch/avr32/Kconfig | 13 ------------- arch/avr32/configs/atngw100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +- arch/avr32/configs/atngw100_mrmt_defconfig | 2 +- arch/avr32/configs/atngw100mkii_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +- arch/avr32/configs/atstk1002_defconfig | 2 +- arch/avr32/configs/atstk1003_defconfig | 2 +- arch/avr32/configs/atstk1004_defconfig | 2 +- arch/avr32/configs/atstk1006_defconfig | 2 +- arch/avr32/configs/favr-32_defconfig | 2 +- arch/avr32/configs/hammerhead_defconfig | 2 +- arch/avr32/configs/mimc200_defconfig | 2 +- arch/avr32/mach-at32ap/Makefile | 1 - drivers/cpufreq/Kconfig | 13 +++++++++++++ drivers/cpufreq/Makefile | 4 ++++ .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0 19 files changed, 31 insertions(+), 28 deletions(-) rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
arch/avr32/Kconfig +0 -13
@@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE def_bool y menu "CPU Frequency scaling" - source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_AT32AP - bool "CPU frequency driver for AT32AP" - depends on CPU_FREQ && PLATFORM_AT32AP - default n - help - This enables the CPU frequency driver for AT32AP processors. - - For details, take a look in <file:Documentation/cpu-freq>. - - If in doubt, say N. - endmenu endmenu
arch/avr32/configs/atngw100_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atngw100_evklcd100_defconfig +1 -1
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atngw100_evklcd101_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atngw100_mrmt_defconfig +1 -1
@@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
arch/avr32/configs/atngw100mkii_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atngw100mkii_evklcd100_defconfig +1 -1
@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atngw100mkii_evklcd101_defconfig +1 -1
@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atstk1002_defconfig +1 -1
@@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atstk1003_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atstk1004_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/atstk1006_defconfig +1 -1
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y
arch/avr32/configs/favr-32_defconfig +1 -1
@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
arch/avr32/configs/hammerhead_defconfig +1 -1
@@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
arch/avr32/configs/mimc200_defconfig +1 -1
@@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y
arch/avr32/mach-at32ap/Makefile +0 -1
@@ -1,7 +1,6 @@ obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o obj-y += hmatrix.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o -obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o obj-$(CONFIG_PM) += pm.o ifeq ($(CONFIG_PM_DEBUG),y)
drivers/cpufreq/Kconfig +13 -0
@@ -205,6 +205,19 @@ depends on ARM source "drivers/cpufreq/Kconfig.arm" endmenu +menu "AVR32 CPU frequency scaling drivers" +depends on AVR32 + +config AVR32_AT32AP_CPUFREQ + bool "CPU frequency driver for AT32AP" + depends on PLATFORM_AT32AP + default n + help + This enables the CPU frequency driver for AT32AP processors. + If in doubt, say N. + +endmenu + menu "PowerPC CPU frequency scaling drivers" depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +4 -0
@@ -75,3 +75,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o + +################################################################################## +# Other platform drivers +obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
drivers/cpufreq/at32ap-cpufreq.c renamed from arch/avr32/mach-at32ap/cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 2/9 blackfin: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of BLACKFIN architecture to drivers/cpufreq.
--- arch/blackfin/mach-common/Makefile | 1 - drivers/cpufreq/Makefile | 1 + .../blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c | 0 3 files changed, 1 insertion(+), 1 deletion(-) rename arch/blackfin/mach-common/cpufreq.c => drivers/cpufreq/blackfin-cpufreq.c (100%)
arch/blackfin/mach-common/Makefile +0 -1
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o ifneq ($(CONFIG_BF60x),y) obj-$(CONFIG_PM) += dpmc_modes.o endif -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
drivers/cpufreq/Makefile +1 -0
@@ -79,3 +79,4 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o +obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o
drivers/cpufreq/blackfin-cpufreq.c renamed from arch/blackfin/mach-common/cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 3/9 cris: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq drivers of CRIS architecture to drivers/cpufreq.
--- arch/cris/arch-v32/mach-a3/Makefile | 1 - arch/cris/arch-v32/mach-fs/Makefile | 1 - drivers/cpufreq/Makefile | 2 ++ .../mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c | 0 .../mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c | 0 5 files changed, 2 insertions(+), 2 deletions(-) rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%) rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
arch/cris/arch-v32/mach-a3/Makefile +0 -1
@@ -3,7 +3,6 @@ # obj-y := dma.o pinmux.o io.o arbiter.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o clean:
arch/cris/arch-v32/mach-fs/Makefile +0 -1
@@ -3,7 +3,6 @@ # obj-y := dma.o pinmux.o io.o arbiter.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o clean:
drivers/cpufreq/Makefile +2 -0
@@ -80,3 +80,5 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o +obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o +obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
drivers/cpufreq/cris-artpec3-cpufreq.c renamed from arch/cris/arch-v32/mach-a3/cpufreq.c +0 -0
drivers/cpufreq/cris-etraxfs-cpufreq.c renamed from arch/cris/arch-v32/mach-fs/cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 4/9 ia64: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of IA64 architecture to drivers/cpufreq.
--- arch/ia64/Kconfig | 5 ++-- arch/ia64/kernel/Makefile | 1 - arch/ia64/kernel/cpufreq/Kconfig | 29 ---------------------- arch/ia64/kernel/cpufreq/Makefile | 2 -- drivers/cpufreq/Kconfig | 17 +++++++++++++ drivers/cpufreq/Makefile | 1 + .../cpufreq/ia64-acpi-cpufreq.c | 1 - 7 files changed, 20 insertions(+), 36 deletions(-) delete mode 100644 arch/ia64/kernel/cpufreq/Kconfig delete mode 100644 arch/ia64/kernel/cpufreq/Makefile rename arch/ia64/kernel/cpufreq/acpi-cpufreq.c => drivers/cpufreq/ia64-acpi-cpufreq.c (99%)
arch/ia64/Kconfig +2 -3
@@ -591,9 +591,8 @@ source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" if PM - -source "arch/ia64/kernel/cpufreq/Kconfig" - +menu "CPU Frequency scaling" +source "drivers/cpufreq/Kconfig" endif endmenu
arch/ia64/kernel/Makefile +0 -1
@@ -23,7 +23,6 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o -obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
arch/ia64/kernel/cpufreq/Kconfig deleted +0 -29
@@ -1,29 +0,0 @@ - -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config IA64_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -endif # CPU_FREQ - -endmenu -
arch/ia64/kernel/cpufreq/Makefile deleted +0 -2
@@ -1,2 +0,0 @@ -obj-$(CONFIG_IA64_ACPI_CPUFREQ) += acpi-cpufreq.o -
drivers/cpufreq/Kconfig +17 -0
@@ -218,6 +218,23 @@ config AVR32_AT32AP_CPUFREQ endmenu +menu "CPUFreq processor drivers" +depends on IA64 + +config IA64_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +endmenu + menu "PowerPC CPU frequency scaling drivers" depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +1 -0
@@ -82,3 +82,4 @@ obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o +obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
drivers/cpufreq/ia64-acpi-cpufreq.c renamed from arch/ia64/kernel/cpufreq/acpi-cpufreq.c +0 -1
@@ -1,5 +1,4 @@/* -* arch/ia64/kernel/cpufreq/acpi-cpufreq.c * This file provides the ACPI based P-state support. This * module works with generic cpufreq infrastructure. Most of * the code is based on i386 version
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 5/9 mips: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of MIPS architecture to drivers/cpufreq.
---
arch/mips/Kconfig | 9 ++++-
arch/mips/kernel/Makefile | 2 --
arch/mips/kernel/cpufreq/Kconfig | 41 ----------------------
arch/mips/kernel/cpufreq/Makefile | 5 ---
drivers/cpufreq/Kconfig | 18 ++++++++++
drivers/cpufreq/Makefile | 1 +
.../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
7 files changed, 27 insertions(+), 49 deletions(-)
delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
delete mode 100644 arch/mips/kernel/cpufreq/Makefile
rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)arch/mips/Kconfig +8 -1
@@ -2539,7 +2539,14 @@ source "kernel/power/Kconfig" endmenu -source "arch/mips/kernel/cpufreq/Kconfig" +config MIPS_EXTERNAL_TIMER + bool + +if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER +menu "CPU Power Management" +source "drivers/cpufreq/Kconfig" +endmenu +endif source "net/Kconfig"
arch/mips/kernel/Makefile +0 -2
@@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o -obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ - obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
arch/mips/kernel/cpufreq/Kconfig deleted +0 -41
41 lines not on this page · raw message
arch/mips/kernel/cpufreq/Makefile deleted +0 -5
@@ -1,5 +0,0 @@ -# -# Makefile for the Linux/MIPS cpufreq. -# - -obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
drivers/cpufreq/Kconfig +18 -0
@@ -235,6 +235,24 @@ config IA64_ACPI_CPUFREQ endmenu +menu "MIPS CPUFreq processor drivers" +depends on MIPS + +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + select CPU_FREQ_TABLE + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and it's successors support this feature. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +endmenu + menu "PowerPC CPU frequency scaling drivers" depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc"
drivers/cpufreq/Makefile +1 -0
@@ -83,3 +83,4 @@ obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.o obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
drivers/cpufreq/loongson2_cpufreq.c renamed from arch/mips/kernel/cpufreq/loongson2_cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 6/9 sh: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of SUPERH architecture to drivers/cpufreq.
--- arch/sh/Kconfig | 18 ------------------ arch/sh/kernel/Makefile | 1 - drivers/cpufreq/Kconfig | 18 ++++++++++++++++++ drivers/cpufreq/Makefile | 1 + .../kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c | 2 -- 5 files changed, 19 insertions(+), 21 deletions(-) rename arch/sh/kernel/cpufreq.c => drivers/cpufreq/sh-cpufreq.c (99%)
arch/sh/Kconfig +0 -18
@@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY endmenu menu "CPU Frequency scaling" - source "drivers/cpufreq/Kconfig" - -config SH_CPU_FREQ - tristate "SuperH CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the cpufreq driver for SuperH. Any CPU that supports - clock rate rounding through the clock framework can use this - driver. While it will make the kernel slightly larger, this is - harmless for CPUs that don't support rate rounding. The driver - will also generate a notice in the boot log before disabling - itself if the CPU in question is not capable of rate rounding. - - For details, take a look at <file:Documentation/cpu-freq>. - - If unsure, say N. - endmenu source "arch/sh/drivers/Kconfig"
arch/sh/kernel/Makefile +0 -1
@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
drivers/cpufreq/Kconfig +18 -0
@@ -258,5 +258,23 @@ depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc" endmenu +menu "SH CPU Frequency scaling" +depends on SUPERH +config SH_CPU_FREQ + tristate "SuperH CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the cpufreq driver for SuperH. Any CPU that supports + clock rate rounding through the clock framework can use this + driver. While it will make the kernel slightly larger, this is + harmless for CPUs that don't support rate rounding. The driver + will also generate a notice in the boot log before disabling + itself if the CPU in question is not capable of rate rounding. + + For details, take a look at <file:Documentation/cpu-freq>. + + If unsure, say N. +endmenu + endif endmenu
drivers/cpufreq/Makefile +1 -0
@@ -84,3 +84,4 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o +obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
drivers/cpufreq/sh-cpufreq.c renamed from arch/sh/kernel/cpufreq.c +0 -2
@@ -1,6 +1,4 @@/* -* arch/sh/kernel/cpufreq.c -* * cpufreq driver for the SuperH processors. * * Copyright (C) 2002 - 2012 Paul Mundt
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 7/9 unicore2: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of UNICORE-2 architecture to drivers/cpufreq.
--- arch/unicore32/kernel/Makefile | 1 - drivers/cpufreq/Makefile | 1 + arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
arch/unicore32/kernel/Makefile +0 -1
@@ -9,7 +9,6 @@ obj-y += setup.o signal.o sys.o stacktrace.o traps.o obj-$(CONFIG_MODULES) += ksyms.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_CPU_FREQ) += cpu-ucv2.o obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o # obj-y for architecture PKUnity v3
drivers/cpufreq/Makefile +1 -0
@@ -85,3 +85,4 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
drivers/cpufreq/unicore2-cpufreq.c renamed from arch/unicore32/kernel/cpu-ucv2.c +1 -1
@@ -1,5 +1,5 @@/* -* linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II +* clock scaling for the UniCore-II * * Code specific to PKUnity SoC and UniCore ISA *
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 8/9 spark: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of SPARK architecture to drivers/cpufreq.
--- arch/sparc/Kconfig | 23 ---------------------- arch/sparc/kernel/Makefile | 3 --- drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++ drivers/cpufreq/Makefile | 2 ++ .../cpufreq/spark-us2e-cpufreq.c | 0 .../cpufreq/spark-us3-cpufreq.c | 0 6 files changed, 25 insertions(+), 26 deletions(-) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/spark-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/spark-us3-cpufreq.c (100%)
arch/sparc/Kconfig +0 -23
@@ -260,29 +260,6 @@ config HOTPLUG_CPU if SPARC64 source "drivers/cpufreq/Kconfig" - -config US3_FREQ - tristate "UltraSPARC-III CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-III processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config US2E_FREQ - tristate "UltraSPARC-IIe CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-IIe processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - endif config US3_MC
arch/sparc/kernel/Makefile +0 -3
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI) += pci_msi.o obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o -# sparc64 cpufreq -obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o -obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o obj-$(CONFIG_US3_MC) += chmc.o obj-$(CONFIG_KPROBES) += kprobes.o
drivers/cpufreq/Kconfig +23 -0
@@ -258,6 +258,29 @@ depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc" endmenu +menu "SPARK CPU frequency scaling drivers" +depends on SPARC64 +config SPARK_US3_CPUFREQ + tristate "UltraSPARC-III CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-III processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config SPARK_US2E_CPUFREQ + tristate "UltraSPARC-IIe CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-IIe processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. +endmenu + menu "SH CPU Frequency scaling" depends on SUPERH config SH_CPU_FREQ
drivers/cpufreq/Makefile +2 -0
@@ -85,4 +85,6 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_SPARK_US2E_CPUFREQ) += spark-us2e-cpufreq.o +obj-$(CONFIG_SPARK_US3_CPUFREQ) += spark-us3-cpufreq.o obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
drivers/cpufreq/spark-us2e-cpufreq.c renamed from arch/sparc/kernel/us2e_cpufreq.c +0 -0
drivers/cpufreq/spark-us3-cpufreq.c renamed from arch/sparc/kernel/us3_cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Viresh Kumar
maintainerPATCH 9/9 powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarThis patch moves cpufreq driver of powerpc platform to drivers/cpufreq.
--- arch/powerpc/platforms/Kconfig | 31 ---------------------- arch/powerpc/platforms/pasemi/Makefile | 1 - arch/powerpc/platforms/powermac/Makefile | 2 -- drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++ drivers/cpufreq/Makefile | 3 +++ .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0 .../cpufreq/pmac32-cpufreq.c | 0 .../cpufreq/pmac64-cpufreq.c | 0 8 files changed, 29 insertions(+), 34 deletions(-) rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
arch/powerpc/platforms/Kconfig +0 -31
@@ -194,37 +194,6 @@ config PPC_IO_WORKAROUNDS source "drivers/cpufreq/Kconfig" -menu "CPU Frequency drivers" - depends on CPU_FREQ - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on PPC_PMAC && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC_PASEMI_CPUFREQ - bool "Support for PA Semi PWRficient" - depends on PPC_PASEMI - default y - select CPU_FREQ_TABLE - help - This adds the support for frequency switching on PA Semi - PWRficient processors. - -endmenu - menu "CPUIdle driver" source "drivers/cpuidle/Kconfig"
arch/powerpc/platforms/pasemi/Makefile +0 -1
@@ -1,3 +1,2 @@ obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o -obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
arch/powerpc/platforms/powermac/Makefile +0 -2
@@ -9,8 +9,6 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o -obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y
drivers/cpufreq/Kconfig.powerpc +26 -0
@@ -5,3 +5,29 @@ config CPU_FREQ_MAPLE help This adds support for frequency switching on Maple 970FX Evaluation Board and compatible boards (IBM JS2x blades). + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + select CPU_FREQ_TABLE + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors.
drivers/cpufreq/Makefile +3 -0
@@ -75,6 +75,9 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o ################################################################################## # PowerPC platform drivers obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o ################################################################################## # Other platform drivers
drivers/cpufreq/pasemi-cpufreq.c renamed from arch/powerpc/platforms/pasemi/cpufreq.c +0 -0
drivers/cpufreq/pmac32-cpufreq.c renamed from arch/powerpc/platforms/powermac/cpufreq_32.c +0 -0
drivers/cpufreq/pmac64-cpufreq.c renamed from arch/powerpc/platforms/powermac/cpufreq_64.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
David Miller
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarFrom: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 22:24:44 +0530
Quoted 1 line
This patch moves cpufreq driver of SPARK architecture to
drivers/cpufreq.
I don't know what spark is.
Viresh Kumar
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 6 lines · David Miller
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 22:24:44 +0530Quoted 1 line
This patch moves cpufreq driver of SPARK architecture to
drivers/cpufreq.I don't know what spark is.
:(
s/spark/sparc ...
I will fix patch in V2..
Viresh Kumar
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 6 lines · Viresh Kumar
Quoted 5 lines · David Miller
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 22:24:44 +0530Quoted 1 line
This patch moves cpufreq driver of SPARK architecture to
drivers/cpufreq.
Quoted 7 lines
Quoted 1 line
I don't know what spark is.
:(
s/spark/sparc ...
I will fix patch in V2..
Mistake was done in code too and not only log :)
Here is re-spin of this patch (attached too in case you want to test):
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of SPARC architecture to drivers/cpufreq.
--- arch/sparc/Kconfig | 23 ---------------------- arch/sparc/kernel/Makefile | 3 --- drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++ drivers/cpufreq/Makefile | 2 ++ .../cpufreq/sparc-us2e-cpufreq.c | 0 .../cpufreq/sparc-us3-cpufreq.c | 0 6 files changed, 25 insertions(+), 26 deletions(-) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c =>
drivers/cpufreq/sparc-us3-cpufreq.c (100%)
arch/sparc/Kconfig +0 -23
@@ -260,29 +260,6 @@ config HOTPLUG_CPU if SPARC64 source "drivers/cpufreq/Kconfig" - -config US3_FREQ - tristate "UltraSPARC-III CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-III processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config US2E_FREQ - tristate "UltraSPARC-IIe CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-IIe processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - endif config US3_MC
arch/sparc/kernel/Makefile +0 -3
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI) += pci_msi.o obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o -# sparc64 cpufreq -obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o -obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o obj-$(CONFIG_US3_MC) += chmc.o obj-$(CONFIG_KPROBES) += kprobes.o
drivers/cpufreq/Kconfig +23 -0
@@ -258,6 +258,29 @@ depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc" endmenu +menu "SPARC CPU frequency scaling drivers" +depends on SPARC64 +config SPARC_US3_CPUFREQ + tristate "UltraSPARC-III CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-III processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config SPARC_US2E_CPUFREQ + tristate "UltraSPARC-IIe CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-IIe processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. +endmenu + menu "SH CPU Frequency scaling" depends on SUPERH config SH_CPU_FREQ
drivers/cpufreq/Makefile +2 -0
@@ -85,4 +85,6 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o +obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
(quoted diff) +0 -0
b/drivers/cpufreq/sparc-us2e-cpufreq.c similarity index 100%
rename from arch/sparc/kernel/us2e_cpufreq.c rename to drivers/cpufreq/sparc-us2e-cpufreq.c
(quoted diff) +0 -0
b/drivers/cpufreq/sparc-us3-cpufreq.c similarity index 100%
rename from arch/sparc/kernel/us3_cpufreq.c rename to drivers/cpufreq/sparc-us3-cpufreq.c
From 61641e2bc0de0659efcd7add6358d71badede840 Mon Sep 17 00:00:00 2001
Message-Id: <61641e2bc0de0659efcd7add6358d71badede840.1364271900.git.viresh.kumar@linaro.org>
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of SPARC architecture to drivers/cpufreq.
--- arch/sparc/Kconfig | 23 ---------------------- arch/sparc/kernel/Makefile | 3 --- drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++ drivers/cpufreq/Makefile | 2 ++ .../cpufreq/sparc-us2e-cpufreq.c | 0 .../cpufreq/sparc-us3-cpufreq.c | 0 6 files changed, 25 insertions(+), 26 deletions(-) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c => drivers/cpufreq/sparc-us3-cpufreq.c (100%)
arch/sparc/Kconfig +0 -23
@@ -260,29 +260,6 @@ config HOTPLUG_CPU if SPARC64 source "drivers/cpufreq/Kconfig" - -config US3_FREQ - tristate "UltraSPARC-III CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-III processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config US2E_FREQ - tristate "UltraSPARC-IIe CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-IIe processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - endif config US3_MC
arch/sparc/kernel/Makefile +0 -3
@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI) += pci_msi.o obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o -# sparc64 cpufreq -obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o -obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o obj-$(CONFIG_US3_MC) += chmc.o obj-$(CONFIG_KPROBES) += kprobes.o
drivers/cpufreq/Kconfig +23 -0
@@ -258,6 +258,29 @@ depends on PPC32 || PPC64 source "drivers/cpufreq/Kconfig.powerpc" endmenu +menu "SPARC CPU frequency scaling drivers" +depends on SPARC64 +config SPARC_US3_CPUFREQ + tristate "UltraSPARC-III CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-III processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config SPARC_US2E_CPUFREQ + tristate "UltraSPARC-IIe CPU Frequency driver" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for UltraSPARC-IIe processors. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. +endmenu + menu "SH CPU Frequency scaling" depends on SUPERH config SH_CPU_FREQ
drivers/cpufreq/Makefile +2 -0
@@ -85,4 +85,6 @@ obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o +obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
drivers/cpufreq/sparc-us2e-cpufreq.c renamed from arch/sparc/kernel/us2e_cpufreq.c +0 -0
drivers/cpufreq/sparc-us3-cpufreq.c renamed from arch/sparc/kernel/us3_cpufreq.c +0 -0
Signature · 1 line
1.7.12.rc2.18.g61b472e
Re: [PATCH 6/9] sh: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 5 lines · Viresh Kumar
This patch moves cpufreq driver of SUPERH architecture to
drivers/cpufreq.
Looks ok to me.
Steven Miao
Acked-byRe: [PATCH 2/9] blackfin: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to a message not in the archiveQuoted 48 lines · Viresh Kumar
This patch moves cpufreq driver of BLACKFIN architecture to
drivers/cpufreq.Cc Mike Frysinger <[email protected]>Cc uclinux-dist-devel-ZG0+EudsQA8dtHy/[email protected]Signed-off-by Viresh Kumar <[email protected]>---
arch/blackfin/mach-common/Makefile
| 1 -
drivers/cpufreq/Makefile
| 1 +
.../blackfin/mach-common/cpufreq.c=>drivers/cpufreq/blackfin-cpufreq.c
| 03 files changed, 1 insertion(+), 1 deletion(-) rename arch/blackfin/mach-common/cpufreq.c =>
drivers/cpufreq/blackfin-cpufreq.c(100%)arch/blackfin/mach-common/Makefile +0
-1@@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o ifneq ($(CONFIG_BF60x),y) obj-$(CONFIG_PM) += dpmc_modes.o endif -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.odrivers/cpufreq/Makefile +1
-0@@ -79,3 +79,4 @@ obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o ################################################################################## # Other platform drivers obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o +obj-$(CONFIG_BLACKFIN) += blackfin-cpufreq.odrivers/cpufreq/blackfin-cpufreq.c renamed from arch/blackfin/mach-common/cpufreq.c +0
-1--1.7.12.rc2.18.g61b472e
Quoted 5 lines
_______________________________________________
Uclinux-dist-devel mailing list Uclinux-dist-devel-ZG0+EudsQA8dtHy/[email protected]
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
_______________________________________________
Uclinux-dist-devel mailing list Uclinux-dist-devel-ZG0+EudsQA8dtHy/[email protected]
https://blackfin.uclinux.org/mailman/listinfo/uclinux-dist-devel
Viresh Kumar
maintainerRe: [PATCH 4/9] ia64: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 6 lines · Viresh Kumar
arch/ia64/Kconfig +0
-0@@ -591,9 +591,8 @@ source "kernel/power/Kconfig" source "drivers/acpi/Kconfig"
arch/ia64/Kconfig source "kernel/power/Kconfig" · line 598
Quoted 10 lines
arch/ia64/Kconfig +2
-3if PM - -source "arch/ia64/kernel/cpufreq/Kconfig" - +menu "CPU Frequency scaling" +source "drivers/cpufreq/Kconfig" endif endmenu
Fixup:
commit 509bc3c30aff65045918f69f750d8845f004cc0a
Author: Viresh Kumar <[email protected]> Date: Sat Mar 30 15:20:41 2013 +0530
fixup! ia64: cpufreq: move cpufreq driver to drivers/cpufreq
--- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/ia64/Kconfig +1 -0
@@ -593,6 +593,7 @@ source "drivers/acpi/Kconfig" if PM menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" +endmenu endif endmenu
Viresh Kumar
maintainerRe: [PATCH 1/9] AVR32: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 20 lines · Viresh Kumar
This patch moves cpufreq driver of AVR32 based at32ap platform to
drivers/cpufreq.Cc Haavard Skinnemoen <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/avr32/Kconfig | 13 ------------- arch/avr32/configs/atngw100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +- arch/avr32/configs/atngw100_mrmt_defconfig | 2 +- arch/avr32/configs/atngw100mkii_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +- arch/avr32/configs/atstk1002_defconfig | 2 +- arch/avr32/configs/atstk1003_defconfig | 2 +- arch/avr32/configs/atstk1004_defconfig | 2 +- arch/avr32/configs/atstk1006_defconfig | 2 +- arch/avr32/configs/favr-32_defconfig | 2 +-
Quoted 8 lines
arch/avr32/configs/hammerhead_defconfig | 2 +- arch/avr32/configs/mimc200_defconfig | 2 +- arch/avr32/mach-at32ap/Makefile | 1 - drivers/cpufreq/Kconfig | 13 +++++++++++++ drivers/cpufreq/Makefile | 4 ++++ .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0 19 files changed, 31 insertions(+), 28 deletions(-) rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)
Hans/Haavard,
Can i have your Ack or comments on this?
Viresh Kumar
maintainerRe: [PATCH 3/9] cris: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 6 lines · Viresh Kumar
This patch moves cpufreq drivers of CRIS architecture to
drivers/cpufreq.Cc Jesper Nilsson <[email protected]>Cc Mikael Starvik <[email protected]>Signed-off-by Viresh Kumar <[email protected]>
Quoted 9 lines
--- arch/cris/arch-v32/mach-a3/Makefile | 1 - arch/cris/arch-v32/mach-fs/Makefile | 1 - drivers/cpufreq/Makefile | 2 ++ .../mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c | 0 .../mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c | 0 5 files changed, 2 insertions(+), 2 deletions(-) rename arch/cris/arch-v32/mach-a3/cpufreq.c => drivers/cpufreq/cris-artpec3-cpufreq.c (100%) rename arch/cris/arch-v32/mach-fs/cpufreq.c => drivers/cpufreq/cris-etraxfs-cpufreq.c (100%)
Jesper/Mikael,
Can i have your views or Ack for this?
Viresh Kumar
maintainerRe: [PATCH 5/9] mips: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 5 lines · Viresh Kumar
This patch moves cpufreq driver of MIPS architecture to
drivers/cpufreq.Cc Ralf Baechle <[email protected]>Signed-off-by Viresh Kumar <[email protected]>
Quoted 12 lines
---
arch/mips/Kconfig | 9 ++++-
arch/mips/kernel/Makefile | 2 --
arch/mips/kernel/cpufreq/Kconfig | 41 ----------------------
arch/mips/kernel/cpufreq/Makefile | 5 ---
drivers/cpufreq/Kconfig | 18 ++++++++++
drivers/cpufreq/Makefile | 1 +
.../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0
7 files changed, 27 insertions(+), 49 deletions(-)
delete mode 100644 arch/mips/kernel/cpufreq/Kconfig
delete mode 100644 arch/mips/kernel/cpufreq/Makefile
rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)Ralf or any other mips guy,
Can i have your ack or comments for this patch?
Viresh Kumar
maintainerRe: [PATCH 7/9] unicore2: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 10 lines · Viresh Kumar
This patch moves cpufreq driver of UNICORE-2 architecture to
drivers/cpufreq.Cc Guan Xuetao <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/unicore32/kernel/Makefile | 1 - drivers/cpufreq/Makefile | 1 + arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) rename arch/unicore32/kernel/cpu-ucv2.c => drivers/cpufreq/unicore2-cpufreq.c (96%)
Guan,
Can i have your ack for this?
Viresh Kumar
maintainerRe: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 7 lines · Viresh Kumar
This patch moves cpufreq driver of powerpc platform to
drivers/cpufreq.Cc Benjamin Herrenschmidt <[email protected]>Cc Paul Mackerras <[email protected]>Cc Olof Johansson <[email protected]>Signed-off-by Viresh Kumar <[email protected]>
Quoted 13 lines
--- arch/powerpc/platforms/Kconfig | 31 ---------------------- arch/powerpc/platforms/pasemi/Makefile | 1 - arch/powerpc/platforms/powermac/Makefile | 2 -- drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++ drivers/cpufreq/Makefile | 3 +++ .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0 .../cpufreq/pmac32-cpufreq.c | 0 .../cpufreq/pmac64-cpufreq.c | 0 8 files changed, 29 insertions(+), 34 deletions(-) rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Benjamin/Paul/Olof,
Any comments on this?
Viresh Kumar
maintainerRe: [PATCH 1/9] AVR32: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarFixing Hans email id.
Quoted 33 lines · Viresh Kumar
Quoted 20 lines · Viresh Kumar
This patch moves cpufreq driver of AVR32 based at32ap platform to
drivers/cpufreq.Cc Haavard Skinnemoen <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/avr32/Kconfig | 13 ------------- arch/avr32/configs/atngw100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100_evklcd101_defconfig | 2 +- arch/avr32/configs/atngw100_mrmt_defconfig | 2 +- arch/avr32/configs/atngw100mkii_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd100_defconfig | 2 +- arch/avr32/configs/atngw100mkii_evklcd101_defconfig | 2 +- arch/avr32/configs/atstk1002_defconfig | 2 +- arch/avr32/configs/atstk1003_defconfig | 2 +- arch/avr32/configs/atstk1004_defconfig | 2 +- arch/avr32/configs/atstk1006_defconfig | 2 +- arch/avr32/configs/favr-32_defconfig | 2 +-Quoted 8 lines
arch/avr32/configs/hammerhead_defconfig | 2 +- arch/avr32/configs/mimc200_defconfig | 2 +- arch/avr32/mach-at32ap/Makefile | 1 - drivers/cpufreq/Kconfig | 13 +++++++++++++ drivers/cpufreq/Makefile | 4 ++++ .../cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c | 0 19 files changed, 31 insertions(+), 28 deletions(-) rename arch/avr32/mach-at32ap/cpufreq.c => drivers/cpufreq/at32ap-cpufreq.c (100%)Hans/Haavard,
Can i have your Ack or comments on this?
Viresh Kumar
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 20 lines · Viresh Kumar
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver todrivers/cpufreqThis patch moves cpufreq driver of SPARC architecture to
drivers/cpufreq.Cc David S. Miller <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/sparc/Kconfig | 23 ---------------------- arch/sparc/kernel/Makefile | 3 --- drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++ drivers/cpufreq/Makefile | 2 ++ .../cpufreq/sparc-us2e-cpufreq.c | 0 .../cpufreq/sparc-us3-cpufreq.c | 0 6 files changed, 25 insertions(+), 26 deletions(-) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c =>
Quoted 1 line
drivers/cpufreq/sparc-us3-cpufreq.c(100%)
Hi David,
Does this one look fine to you?
Xuetao Guan
Acked-byRe: [PATCH 7/9] unicore2: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 17 lines · Viresh Kumar
Quoted 12 lines
This patch moves cpufreq driver of UNICORE-2 architecture to
drivers/cpufreq.Cc Guan Xuetao <[email protected]>Signed-off-by Viresh Kumar <[email protected]>---
arch/unicore32/kernel/Makefile
| 1 -
drivers/cpufreq/Makefile
| 1 +
arch/unicore32/kernel/cpu-ucv2.c=>drivers/cpufreq/unicore2-cpufreq.c
| 2 +-Quoted 3 lines
3 files changed, 2 insertions(+), 2 deletions(-) rename arch/unicore32/kernel/cpu-ucv2.c =>
drivers/cpufreq/unicore2-cpufreq.c(96%)
Quoted 4 lines
Guan,
Can i have your ack for this?
Sure. Sorry for my delay.
David Miller
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarFrom: Viresh Kumar <[email protected]>
Date: Sun, 31 Mar 2013 13:00:21 +0530
Quoted 23 lines · Viresh Kumar
Quoted 20 lines
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver todrivers/cpufreqThis patch moves cpufreq driver of SPARC architecture to
drivers/cpufreq.Cc David S. Miller <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/sparc/Kconfig | 23 ---------------------- arch/sparc/kernel/Makefile | 3 --- drivers/cpufreq/Kconfig | 23 ++++++++++++++++++++++ drivers/cpufreq/Makefile | 2 ++ .../cpufreq/sparc-us2e-cpufreq.c | 0 .../cpufreq/sparc-us3-cpufreq.c | 0 6 files changed, 25 insertions(+), 26 deletions(-) rename arch/sparc/kernel/us2e_cpufreq.c => drivers/cpufreq/sparc-us2e-cpufreq.c (100%) rename arch/sparc/kernel/us3_cpufreq.c =>Quoted 1 line
drivers/cpufreq/sparc-us3-cpufreq.c(100%)
Quoted 3 lines
Hi David,
Does this one look fine to you?
Subject line still has the "spark" typo.
Viresh Kumar
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 6 lines · David Miller
Quoted 4 lines · Viresh Kumar
Quoted 3 lines
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver todrivers/cpufreqSubject line still has the "spark" typo.
Your mail was scary, really... HOW can i do it??
And then i saw how you got it wrong. I haven't sent a new mail, so mails subject remains the same... I copied V2 in the same mail.. Check above, subject looks fine :)
Viresh Kumar
maintainerRe: [PATCH 4/9] ia64: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 16 lines · Viresh Kumar
Fixup:
commit
509bc3c30aff65045918f69f750d8845f004cc0aAuthor: Viresh Kumar <[email protected]> Date: Sat Mar 30 15:20:41 2013 +0530fixup! ia64: cpufreq: move cpufreq driver to
drivers/cpufreq--- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+)arch/ia64/Kconfig +0
-0
arch/ia64/Kconfig source "drivers/acpi/Kconfig" · line 599
Quoted 7 lines
arch/ia64/Kconfig +1
-0@@ -593,6 +593,7 @@ source "drivers/acpi/Kconfig" if PM menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" +endmenu endif endmenu
Hi Tony/Fenghua,
Any comments on this patch?
Re: [PATCH 4/9] ia64: cpufreq: move cpufreq driver to drivers/cpufreq
[Repost in plain text so the lists don't bounce it - curse you Gmail for switching to HTML]
Quoted 1 line
Any comments on this patch?
This part looks OK ... But is there a big finish later in the patch series where you unify some/all of the cpufreq code across architectures? By itself just moving
bits from arch/ia64/kernel/cpufreq to drivers/cpufreq/ doesn't look to add much value.
-Tony
Viresh Kumar
maintainerRe: [PATCH 4/9] ia64: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 2 lines · Tony Luck
[Repost in plain text so the lists don't bounce it - curse you Gmail for switching to HTML]
Just to let others know how you fixed it: Above the compose area there is a small button (or whatever you call it) which can show "Rich Formatting" or "plain text". Click on that so that it shows "Rich Formatting" all the time.
Quoted 7 lines
Quoted 1 line
Any comments on this patch?
This part looks OK ... But is there a big finish later in the patch series where you unify some/all of the cpufreq code across architectures? By itself just moving
bits fromarch/ia64/kernel/cpufreqtodrivers/cpufreq/doesn't look to add much value.
There are people (including me) who tried various times to get things fixed/ consolidated in cpufreq area. They mostly worked over cleaning up stuff inside drivers/cpufreq area rather then looking at complete kernel. To make that path easy, this patchset is the first step: "Bring all of them together"..
After this more consolidation work may follow which will span all cpufreq drivers.
One aspect would be to use cpufreq-cpu0 for whatever platform we can.
For now, your Ack will work :)
Viresh Kumar
maintainerRe: [PATCH 5/9] mips: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 19 lines · Viresh Kumar
Quoted 5 lines · Viresh Kumar
This patch moves cpufreq driver of MIPS architecture to
drivers/cpufreq.Cc Ralf Baechle <[email protected]>Signed-off-by Viresh Kumar <[email protected]>Quoted 12 lines
--- arch/mips/Kconfig | 9 ++++- arch/mips/kernel/Makefile | 2 -- arch/mips/kernel/cpufreq/Kconfig | 41 ---------------------- arch/mips/kernel/cpufreq/Makefile | 5 --- drivers/cpufreq/Kconfig | 18 ++++++++++ drivers/cpufreq/Makefile | 1 + .../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0 7 files changed, 27 insertions(+), 49 deletions(-) delete mode 100644 arch/mips/kernel/cpufreq/Kconfig delete mode 100644 arch/mips/kernel/cpufreq/Makefile rename {arch/mips/kernel => drivers}/cpufreq/loongson2_cpufreq.c (100%)
Quoted 3 lines
Ralf or any other mips guy,
Can i have your ack or comments for this patch?
Ping!!
Viresh Kumar
maintainerRe: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 22 lines · Viresh Kumar
Quoted 7 lines · Viresh Kumar
This patch moves cpufreq driver of powerpc platform to
drivers/cpufreq.Cc Benjamin Herrenschmidt <[email protected]>Cc Paul Mackerras <[email protected]>Cc Olof Johansson <[email protected]>Signed-off-by Viresh Kumar <[email protected]>Quoted 13 lines
--- arch/powerpc/platforms/Kconfig | 31 ---------------------- arch/powerpc/platforms/pasemi/Makefile | 1 - arch/powerpc/platforms/powermac/Makefile | 2 -- drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++ drivers/cpufreq/Makefile | 3 +++ .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0 .../cpufreq/pmac32-cpufreq.c | 0 .../cpufreq/pmac64-cpufreq.c | 0 8 files changed, 29 insertions(+), 34 deletions(-) rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 3 lines
Benjamin/Paul/Olof,
Any comments on this?
Ping!!
John Crispin
Acked-byRe: [PATCH 5/9] mips: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 20 lines · Viresh Kumar
Quoted 19 lines · Viresh Kumar
Quoted 17 lines · Viresh Kumar
This patch moves cpufreq driver of MIPS architecture to
drivers/cpufreq.--- arch/mips/Kconfig | 9 ++++- arch/mips/kernel/Makefile | 2 -- arch/mips/kernel/cpufreq/Kconfig | 41 ---------------------- arch/mips/kernel/cpufreq/Makefile | 5 --- drivers/cpufreq/Kconfig | 18 ++++++++++ drivers/cpufreq/Makefile | 1 + .../kernel => drivers}/cpufreq/loongson2_cpufreq.c | 0 7 files changed, 27 insertions(+), 49 deletions(-)delete mode 100644
arch/mips/kernel/cpufreq/Kconfig
delete mode 100644arch/mips/kernel/cpufreq/Makefile
rename {arch/mips/kernel=>drivers}/cpufreq/loongson2_cpufreq.c(100%)
Quoted 7 lines
Quoted 3 lines
Ralf or any other mips guy,
Can i have your ack or comments for this patch?
Ping!!
sorry for the delay ...
Re: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 23 lines · Viresh Kumar
Quoted 22 lines · Viresh Kumar
Quoted 20 lines · Viresh Kumar
This patch moves cpufreq driver of powerpc platform to
drivers/cpufreq.Cc Benjamin Herrenschmidt <[email protected]>Cc Paul Mackerras <[email protected]>Cc Olof Johansson <[email protected]>Signed-off-by Viresh Kumar <[email protected]>--- arch/powerpc/platforms/Kconfig | 31 ---------------------- arch/powerpc/platforms/pasemi/Makefile | 1 - arch/powerpc/platforms/powermac/Makefile | 2 -- drivers/cpufreq/Kconfig.powerpc | 26 ++++++++++++++++++ drivers/cpufreq/Makefile | 3 +++ .../cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c | 0 .../cpufreq/pmac32-cpufreq.c | 0 .../cpufreq/pmac64-cpufreq.c | 0 8 files changed, 29 insertions(+), 34 deletions(-) rename arch/powerpc/platforms/pasemi/cpufreq.c => drivers/cpufreq/pasemi-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_32.c => drivers/cpufreq/pmac32-cpufreq.c (100%) rename arch/powerpc/platforms/powermac/cpufreq_64.c => drivers/cpufreq/pmac64-cpufreq.c (100%)
Quoted 5 lines
Quoted 3 lines
Benjamin/Paul/Olof,
Any comments on this?
Ping!!
I'm on vacation until end of April. No objection to the patch but somebody needs to test it.
Cheers,
Ben.
Viresh Kumar
maintainerRe: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 2 lines · Benjamin Herrenschmidt
I'm on vacation until end of April. No objection to the patch but somebody needs to test it.
Any input on whom i can ask for that?
Viresh Kumar
maintainerRe: [PATCH 1/9] AVR32: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to a message not in the archiveQuoted 8 lines · Hans-Christian Egtvedt
Quoted 1 line · Viresh Kumar
Ping!!
If it still builds, then
It only uses global header files, so should be fine. Thanks.
Ahh!! I have removed others from my last Ping!! mail (didn't wanted to spam their inbox), but yes they are aware of your Ack now.
Thanks.
Re: [PATCH 3/9] cris: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 6 lines · Viresh Kumar
This patch moves cpufreq drivers of CRIS architecture to
drivers/cpufreq.Cc Jesper Nilsson <[email protected]>Cc Mikael Starvik <[email protected]>Signed-off-by Viresh Kumar <[email protected]>
Ah, sorry for not responding earlier, looks good!
/^JN - Jesper Nilsson
Signature · 1 line
Jesper Nilsson -- [email protected]
Viresh Kumar
maintainerRe: [PATCH 8/9] spark: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to a message not in the archiveQuoted 18 lines · David Miller
From: Viresh Kumar <[email protected]>
Date: Wed, 3 Apr 2013 14:59:44 +0530Quoted 15 lines · Viresh Kumar
Quoted 13 lines · David Miller
Quoted 6 lines
Quoted 4 lines · Viresh Kumar
Quoted 3 lines
From: Viresh Kumar <[email protected]>
Date: Mon, 25 Mar 2013 11:20:23 +0530
Subject: [PATCH] sparc: cpufreq: move cpufreq driver todrivers/cpufreqSubject line still has the "spark" typo.
Your mail was scary, really... HOW can i do it??
And then i saw how you got it wrong. I haven't sent a new mail, so mails subject remains the same... I copied V2 in the same mail.. Check above, subject looks fine :)
Quoted 6 lines
Quoted 4 lines
Hi David,
I think all pending issues are fixed now... Can i have your Ack please? Or maybe more comments :)
Acked-by David S. Miller <[email protected]>
Adding everybody else in cc.
Tony Luck
Acked-byRe: [PATCH 4/9] ia64: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 1 line · Viresh Kumar
For now, your Ack will work :)
Viresh Kumar
maintainerRe: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Benjamin HerrenschmidtQuoted 11 lines · Benjamin Herrenschmidt
Quoted 7 lines · Viresh Kumar
Quoted 3 lines · Viresh Kumar
Benjamin/Paul/Olof,
Any comments on this?
Ping!!
I'm on vacation until end of April. No objection to the patch but somebody needs to test it.
Hi,
Can somebody else from powerpc world give it a try?
OR
@Rafael: Can we get this pushed in linux-next as is and then people would be forced to test it and in case there are any complains, i will fix them or you can revert it?
Re: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 8 lines · Viresh Kumar
Quoted 7 lines · Benjamin Herrenschmidt
Quoted 6 lines · Viresh Kumar
Quoted 3 lines · Viresh Kumar
Benjamin/Paul/Olof,
Any comments on this?
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Ping!!
I'm on vacation until end of April. No objection to the patch but somebody needs to test it.
Hi,
Can somebody else from powerpc world give it a try?
Deepthi, can you help?
Quoted 5 lines
OR
@Rafael: Can we get this pushed in linux-next as is and then people would be forced to test it and in case there are any complains, i will fix them or you can revert it?
Re: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
In reply to Viresh KumarQuoted 15 lines · Viresh Kumar
Quoted 11 lines · Benjamin Herrenschmidt
Quoted 7 lines · Viresh Kumar
Quoted 3 lines · Viresh Kumar
Benjamin/Paul/Olof,
Any comments on this?
Ping!!
I'm on vacation until end of April. No objection to the patch but somebody needs to test it.
Hi,
Quoted 7 lines
Can somebody else from powerpc world give it a try?
OR
@Rafael: Can we get this pushed in linux-next as is and then people would be forced to test it and in case there are any complains, i will fix them or you can revert it?
That's not very nice this late in the staging cycle. Give the powerpc guys a little more time than a single day to come back with test results, please.
-Olof
Viresh Kumar
maintainerRe: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 3 lines · Olof Johansson
That's not very nice this late in the staging cycle. Give the powerpc guys a little more time than a single day to come back with test results, please.
Yes we are waiting indefinitely for an Ack from powerpc guys.. If we can get a Ack soon, we will get it in 3.10 otherwise next cycle.
Re: [PATCH 9/9] powerpc: cpufreq: move cpufreq driver to drivers/cpufreq
Quoted 7 lines · Viresh Kumar
Quoted 3 lines · Olof Johansson
That's not very nice this late in the staging cycle. Give the powerpc guys a little more time than a single day to come back with test results, please.
Yes we are waiting indefinitely for an Ack from powerpc guys.. If we can get a Ack soon, we will get it in 3.10 otherwise next cycle.
Well, I'll be traveling from Saturday morning onwards until the end of the next week and my window for taking stuff into v3.10 closes in 16 hours. Whatever is not ready (i.e. ACKed in this particular case) before that time, won't be taken.
Thanks,
Rafael
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.