Skip to contentSkip to conversation

Minor comment/doc fixes for Poky

PATCH New Paul Eggleton 1 participant 4 messages Apr 9, 2013

lore
Share & tools
lore
#0 lore raw

cover Minor comment/doc fixes for Poky

No functional changes, just fixes for comments and README.hardware.

The following changes since commit b49ddeb11c0319b7ece278fd7cef6b0223114ca9:

udev: Move udevd back to /sbin (2013-04-09 13:31:37 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib paule/layer-tweaks
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=paule/layer-tweaks

Paul Eggleton (3):
yocto-layer / yocto-bsp: tweak layer.conf comment meta-yocto*/conf/layer.conf: tweak BBFILES comments README.hardware: bring up-to-date

 README.hardware                                    |   51 +++++++++++---------
 meta-yocto-bsp/conf/layer.conf                     |    2 +-
 meta-yocto/conf/layer.conf                         |    2 +-
 .../substrate/target/arch/common/conf/layer.conf   |    2 +-
 .../substrate/target/arch/layer/conf/layer.conf    |    2 +-
 5 files changed, 33 insertions(+), 26 deletions(-)
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/3 yocto-layer / yocto-bsp: tweak layer.conf comment

We have recipes-* directories not a recipes directory; this is left over from the old old layout (2010).

---
 scripts/lib/bsp/substrate/target/arch/common/conf/layer.conf |    2 +-
 scripts/lib/bsp/substrate/target/arch/layer/conf/layer.conf  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
scripts/lib/bsp/substrate/target/arch/common/conf/layer.conf +1 -1
index 97029dd..5529f45 100644
@@ -1,7 +1,7 @@
 # We have a conf and classes directory, add to BBPATH
 BBPATH .= ":${LAYERDIR}"
 
-# We have a recipes directory, add to BBFILES
+# We have a recipes-* directories, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
 	${LAYERDIR}/recipes-*/*/*.bbappend"
 
scripts/lib/bsp/substrate/target/arch/layer/conf/layer.conf +1 -1
index 76153f3..bdffe17 100644
@@ -1,7 +1,7 @@
 # We have a conf and classes directory, add to BBPATH
 BBPATH .= ":${LAYERDIR}"
 
-# We have a recipes directory, add to BBFILES
+# We have recipes-* directories, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
 	${LAYERDIR}/recipes-*/*/*.bbappend"
 
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/3 meta-yocto*/conf/layer.conf: tweak BBFILES comments

In reply to Paul Eggleton

"packages" was the old name (pre-2010) under which the recipe files were stored.

---
 meta-yocto-bsp/conf/layer.conf |    2 +-
 meta-yocto/conf/layer.conf     |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
meta-yocto-bsp/conf/layer.conf +1 -1
index 18544bd..2be7cc3 100644
@@ -1,7 +1,7 @@
 # We have a conf and classes directory, add to BBPATH
 BBPATH .= ":${LAYERDIR}"
 
-# We have a packages directory, add to BBFILES
+# We have recipes-* directories, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
             ${LAYERDIR}/recipes-*/*/*.bbappend"
 
meta-yocto/conf/layer.conf +1 -1
index 89ed171..e012f24 100644
@@ -1,7 +1,7 @@
 # We have a conf and classes directory, add to BBPATH
 BBPATH =. "${LAYERDIR}:"
 
-# We have a packages directory, add to BBFILES
+# We have recipes-* directories, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
             ${LAYERDIR}/recipes-*/*/*.bbappend"
 
Signature · 1 line
1.7.10.4
#3 lore raw

PATCH 3/3 README.hardware: bring up-to-date

In reply to Paul Eggleton

* Fix Yocto Project documentation URL
* Indicate physical reference hardware support comes from meta-yocto-bsp
* Remove/replace references to Poky where appropriate

---
 README.hardware |   51 +++++++++++++++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 22 deletions(-)
README.hardware +29 -22
index d48c953..ad2fe89 100644
@@ -1,28 +1,34 @@
                           Poky Hardware README
                           ====================
 
-This file gives details about using Poky with different hardware reference
-boards and consumer devices. A full list of target machines can be found by
-looking in the meta/conf/machine/ directory. If in doubt about using Poky with
-your hardware, consult the documentation for your board/device.
+This file gives details about using Poky with the reference machines
+supported out of the box. A full list of supported reference target machines
+can be found by looking in the following directories:
+
+   meta/conf/machine/
+   meta-yocto-bsp/conf/machine/
+
+If you are in doubt about using Poky/OpenEmbedded with your hardware, consult
+the documentation for your board/device.
 
 Support for additional devices is normally added by creating BSP layers - for
 more information please see the Yocto Board Support Package (BSP) Developer's
 Guide - documentation source is in documentation/bspguide or download the PDF
 from:
 
-   http://yoctoproject.org/community/documentation
+   http://yoctoproject.org/documentation
 
-Support for machines other than QEMU may be moved out to separate BSP layers in
-future versions.
+Support for physical reference hardware has now been split out into a
+meta-yocto-bsp layer which can be removed separately from other layers if not
+needed.
 
 
 QEMU Emulation Targets
 ======================
 
-To simplify development Poky supports building images to work with the QEMU
-emulator in system emulation mode. Several architectures are currently
-supported:
+To simplify development, the build system supports building images to
+work with the QEMU emulator in system emulation mode. Several architectures
+are currently supported:
 
   * ARM (qemuarm)
   * x86 (qemux86)
@@ -30,32 +36,33 @@ supported:
   * PowerPC (qemuppc)
   * MIPS (qemumips)
 
-Use of the QEMU images is covered in the Poky Reference Manual. The Poky
-MACHINE setting corresponding to the target is given in brackets.
+Use of the QEMU images is covered in the Yocto Project Reference Manual.
+The appropriate MACHINE variable value corresponding to the target is given
+in brackets.
 
 
 Hardware Reference Boards
 =========================
 
-The following boards are supported by Poky's core layer:
+The following boards are supported by the meta-yocto-bsp layer:
 
   * Texas Instruments Beagleboard (beagleboard)
   * Freescale MPC8315E-RDB (mpc8315e-rdb)
   * Ubiquiti Networks RouterStation Pro (routerstationpro)
 
-For more information see the board's section below. The Poky MACHINE setting
-corresponding to the board is given in brackets.
+For more information see the board's section below. The appropriate MACHINE
+variable value corresponding to the board is given in brackets.
 
 
 Consumer Devices
 ================
 
-The following consumer devices are supported by Poky's core layer:
+The following consumer devices are supported by the meta-yocto-bsp layer:
 
   * Intel Atom based PCs and devices (atom-pc)
 
-For more information see the device's section below. The Poky MACHINE setting
-corresponding to the device is given in brackets.
+For more information see the device's section below. The appropriate MACHINE
+variable value corresponding to the device is given in brackets.
 
 
 
@@ -78,7 +85,7 @@ supports ethernet, wifi, sound, and i915 graphics by default in addition to
 common PC input devices, busses, and so on.
 
 Depending on the device, it can boot from a traditional hard-disk, a USB device,
-or over the network. Writing poky generated images to physical media is
+or over the network. Writing generated images to physical media is
 straightforward with a caveat for USB devices. The following examples assume the
 target boot device is /dev/sdb, be sure to verify this and use the correct
 device as the following commands are run as root and are not reversable.
@@ -131,7 +138,7 @@ USB Device:
      device stops flashing, remove and reinsert the device to allow the
      kernel to detect the new partition layout.
 
-     c. Copy the contents of the poky image to the USB-ZIP mode device:
+     c. Copy the contents of the image to the USB-ZIP mode device:
 
      # mkdir /tmp/image
      # mkdir /tmp/usbkey
@@ -281,8 +288,8 @@ anything here.
 Load the kernel and dtb (device tree blob), and boot the system as follows:
 
  1. Get the kernel (uImage-mpc8315e-rdb.bin) and dtb (uImage-mpc8315e-rdb.dtb)
-    files from the Poky build tmp/deploy directory, and make them available on
-    your TFTP server.
+    files from the tmp/deploy directory, and make them available on your TFTP
+    server.
 
  2. Connect the board's first serial port to your workstation and then start up
     your favourite serial terminal so that you will be able to interact with
Signature · 1 line
1.7.10.4