changed irq handling for at86rf230
Subsystems (4)
v3 cover changed irq handling for at86rf230
Changes to last version: Reordered local variable declarations.
The first patch add the option to configure the irq type of the plattform and the device. The second patch changes the irq handling when edge type interrupts are configured.
Without irq configuration of the irq type, the driver will remain backward compatible.
Thanks,
Sascha Herrmann (2):
at86rf230: add irq type configuration option
at86rf230: change irq handling to prevent lockups with edge type irq
drivers/net/ieee802154/at86rf230.c | 98 +++++++++++++++++++++++++----------- include/linux/spi/at86rf230.h | 14 ++++++ 2 files changed, 82 insertions(+), 30 deletions(-)
Signature · 1 line
1.7.10.4
PATCH v3 2/2 at86rf230: change irq handling to prevent lockups with edge type irq
Implemented separate irq handling for edge and level type interrupt configuration. For edge type interrupts calls to disable_irq_nosync() and enable_irq() are removed. The at86rf230 resets the irq line only after the irq status register is read. Disabling the irq can lock the driver in situations where a irq is set by the radio while the driver is still reading the frame buffer.
With irq_type configuration set to 0 the original behavior is preserverd.
Additional the irq filter register is set to filter out all unused interrupts and the irq status register is read in the probe function to clear the irq line.
Conflicts:
drivers/net/ieee802154/at86rf230.c --- drivers/net/ieee802154/at86rf230.c | 53 ++++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 15 deletions(-)
drivers/net/ieee802154/at86rf230.c +38 -15
@@ -51,7 +51,7 @@ struct at86rf230_local {struct ieee802154_dev *dev;spinlock_t lock; -bool irq_disabled; +bool irq_busy;bool is_tx; };
@@ -547,7 +547,7 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)unsigned long flags;spin_lock (&lp->lock); -if (lp->irq_disabled) { +if (lp->irq_busy) {spin_unlock (&lp->lock);return -EBUSY ; }
@@ -708,8 +708,16 @@ static void at86rf230_irqwork(struct work_struct *work) }spin_lock_irqsave (&lp->lock, flags); - lp->irq_disabled =0 ; + lp->irq_busy =0 ;spin_unlock_irqrestore (&lp->lock, flags); +} + +static void at86rf230_irqwork_level (struct work_struct *work) +{ +struct at86rf230_local *lp = + container_of(work, struct at86rf230_local, irqwork); + +at86rf230_irqwork (work);enable_irq (lp->spi->irq); }
@@ -718,10 +726,8 @@ static irqreturn_t at86rf230_isr(int irq, void *data) {struct at86rf230_local *lp = data; -disable_irq_nosync (irq); -spin_lock (&lp->lock); - lp->irq_disabled =1 ; + lp->irq_busy =1 ;spin_unlock (&lp->lock);schedule_work (&lp->irqwork);
@@ -729,6 +735,13 @@ static irqreturn_t at86rf230_isr(int irq, void *data)return IRQ_HANDLED ; } +static irqreturn_t at86rf230_isr_level (int irq,void *data) +{ +disable_irq_nosync (irq); + +return at86rf230_isr (irq, data); +} +static int at86rf230_irq_polarity (struct at86rf230_local *lp,int pol) {return at86rf230_write_subreg (lp,SR_IRQ_POLARITY , pol);
@@ -766,12 +779,7 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)if (rc)return rc; - rc =at86rf230_write_subreg (lp,SR_IRQ_MASK ,0xff );/* IRQ_TRX_UR | -* IRQ_CCA_ED | -* IRQ_TRX_END | -* IRQ_PLL_UNL | -* IRQ_PLL_LOCK -*/ + rc =at86rf230_write_subreg (lp,SR_IRQ_MASK ,IRQ_TRX_END );if (rc)return rc;
@@ -831,7 +839,9 @@ static int at86rf230_probe(struct spi_device *spi)struct at86rf230_platform_data *pdata;struct ieee802154_dev *dev;struct at86rf230_local *lp; -u8 man_id_0, man_id_1; +u8 man_id_0, man_id_1, status; +irq_handler_t irq_handler; +work_func_t irq_worker;int rc, supported =0 ;const char *chip;
@@ -861,8 +871,16 @@ static int at86rf230_probe(struct spi_device *spi) dev->phy->channels_supported[0 ] =0x7FFF800 ; dev->flags =IEEE802154_HW_OMIT_CKSUM ; +if (pdata->irq_type & (IRQF_TRIGGER_RISING |IRQF_TRIGGER_FALLING )) { + irq_worker = at86rf230_irqwork; + irq_handler = at86rf230_isr; + }else { + irq_worker = at86rf230_irqwork_level; + irq_handler = at86rf230_isr_level; + } +mutex_init (&lp->bmux); -INIT_WORK (&lp->irqwork, at86rf230_irqwork); +INIT_WORK (&lp->irqwork, irq_worker);spin_lock_init (&lp->lock);init_completion (&lp->tx_complete);
@@ -943,12 +961,17 @@ static int at86rf230_probe(struct spi_device *spi)if (rc) goto err_gpio_dir; - rc =request_irq (spi->irq, at86rf230_isr, + rc =request_irq (spi->irq, irq_handler,IRQF_SHARED | pdata->irq_type,dev_name (&spi->dev), lp);if (rc) goto err_gpio_dir; +/* Read irq status register to reset irq line */ + rc =at86rf230_read_subreg (lp,RG_IRQ_STATUS ,0xff ,0 , &status); +if (rc) + goto err_irq; + rc =ieee802154_register_device (lp->dev);if (rc) goto err_irq;
Signature · 1 line
1.7.10.4
PATCH v3 1/2 at86rf230: add irq type configuration option
In reply to Sascha HerrmannAdd option to at86rf230 platform data to configure the type of the interrupt used by the driver. The irq polarity of the device will be configured accordingly.
--- drivers/net/ieee802154/at86rf230.c | 47 ++++++++++++++++++++++++------------ include/linux/spi/at86rf230.h | 14 +++++++++++ 2 files changed, 45 insertions(+), 16 deletions(-)
drivers/net/ieee802154/at86rf230.c +31 -16
@@ -219,6 +219,9 @@ struct at86rf230_local {#define IRQ_PLL_UNL (1 << 1)#define IRQ_PLL_LOCK (1 << 0) +#define IRQ_ACTIVE_HIGH 0 +#define IRQ_ACTIVE_LOW 1 +#define STATE_P_ON 0x00/* BUSY */ #define STATE_BUSY_RX 0x01#define STATE_BUSY_TX 0x02
@@ -726,11 +729,16 @@ static irqreturn_t at86rf230_isr(int irq, void *data)return IRQ_HANDLED ; } +static int at86rf230_irq_polarity (struct at86rf230_local *lp,int pol) +{ +return at86rf230_write_subreg (lp,SR_IRQ_POLARITY , pol); +}static int at86rf230_hw_init (struct at86rf230_local *lp) { +struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data; +int rc, irq_pol;u8 status; -int rc; rc =at86rf230_read_subreg (lp,SR_TRX_STATUS , &status);if (rc)
@@ -748,6 +756,16 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)dev_info (&lp->spi->dev,"Status: %02x\n" , status); } +/* configure irq polarity, defaults to high active */ +if (pdata->irq_type & (IRQF_TRIGGER_FALLING |IRQF_TRIGGER_LOW )) + irq_pol =IRQ_ACTIVE_LOW ; +else + irq_pol =IRQ_ACTIVE_HIGH ; + + rc =at86rf230_irq_polarity (lp, irq_pol); +if (rc) +return rc; + rc =at86rf230_write_subreg (lp,SR_IRQ_MASK ,0xff );/* IRQ_TRX_UR | * IRQ_CCA_ED | * IRQ_TRX_END |
@@ -798,37 +816,36 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)return 0 ; } -static int at86rf230_fill_data (struct spi_device *spi) +static void at86rf230_fill_data (struct spi_device *spi) {struct at86rf230_local *lp =spi_get_drvdata (spi);struct at86rf230_platform_data *pdata = spi->dev.platform_data; -if (!pdata) { -dev_err (&spi->dev,"no platform_data\n" ); -return -EINVAL ; - } - lp->rstn = pdata->rstn; lp->slp_tr = pdata->slp_tr; lp->dig2 = pdata->dig2; - -return 0 ; }static int at86rf230_probe (struct spi_device *spi) { +struct at86rf230_platform_data *pdata;struct ieee802154_dev *dev;struct at86rf230_local *lp;u8 man_id_0, man_id_1; -int rc; +int rc, supported =0 ;const char *chip; -int supported =0 ;if (!spi->irq) {dev_err (&spi->dev,"no IRQ specified\n" );return -EINVAL ; } + pdata = spi->dev.platform_data; +if (!pdata) { +dev_err (&spi->dev,"no platform_data\n" ); +return -EINVAL ; + } + dev =ieee802154_alloc_device (sizeof (*lp), &at86rf230_ops);if (!dev)return -ENOMEM ;
@@ -851,9 +868,7 @@ static int at86rf230_probe(struct spi_device *spi)spi_set_drvdata (spi, lp); - rc =at86rf230_fill_data (spi); -if (rc) - goto err_fill; +at86rf230_fill_data (spi); rc =gpio_request (lp->rstn,"rstn" );if (rc)
@@ -928,7 +943,8 @@ static int at86rf230_probe(struct spi_device *spi)if (rc) goto err_gpio_dir; - rc =request_irq (spi->irq, at86rf230_isr,IRQF_SHARED , + rc =request_irq (spi->irq, at86rf230_isr, +IRQF_SHARED | pdata->irq_type,dev_name (&spi->dev), lp);if (rc) goto err_gpio_dir;
@@ -948,7 +964,6 @@ err_gpio_dir: err_slp_tr:gpio_free (lp->rstn); err_rstn: -err_fill:spi_set_drvdata (spi,NULL );mutex_destroy (&lp->bmux);ieee802154_free_device (lp->dev);
include/linux/spi/at86rf230.h +14 -0
@@ -26,6 +26,20 @@ struct at86rf230_platform_data {int rstn;int slp_tr;int dig2; + +/* Setting the irq_type will configure the driver to request +* the platform irq trigger type according to the given value +* and configure the interrupt polarity of the device to the +* corresponding polarity. +* +* Allowed values are: IRQF_TRIGGER_RISING, IRQF_TRIGGER_FALLING, +* IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW +* +* Setting it to 0, the driver does not touch the trigger type +* configuration of the interrupt and sets the interrupt polarity +* of the device to high active (the default value). +*/ + int irq_type; };#endif
Signature · 1 line
1.7.10.4
From: Sascha Herrmann <[email protected]>
Date: Mon, 15 Apr 2013 10:33:27 +0200
Quoted 8 lines
Changes to last version: Reordered local variable declarations.
The first patch add the option to configure the irq type of the plattform and the device. The second patch changes the irq handling when edge type interrupts are configured.
Without irq configuration of the irq type, the driver will remain backward compatible.
I'd like to see some reviews of this patch series, thanks.
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
Quoted 1 line · David Miller
I'd like to see some reviews of this patch series, thanks.
Sascha and I discussed the functional aspects of his changes a while ago and I'm satisfied with the way he has done things now. I also believe his approach to be technically sound.
Furthermore, I merged his changes into my atben driver (which uses level-triggered interrupts while Sascha's platform is edge-triggered), and it passed some light testing.
- Werner
David Miller
maintainerFrom: Werner Almesberger <[email protected]>
Date: Mon, 15 Apr 2013 22:44:19 -0300
Quoted 10 lines
Quoted 1 line · David Miller
I'd like to see some reviews of this patch series, thanks.
Sascha and I discussed the functional aspects of his changes a while ago and I'm satisfied with the way he has done things now. I also believe his approach to be technically sound.
Furthermore, I merged his changes into my atben driver (which uses level-triggered interrupts while Sascha's platform is edge-triggered), and it passed some light testing.
"Acked-by: Werner ..." is most useful to me.
Quoted 1 line · David Miller
"Acked-by: Werner ..." is most useful to me.
Hmm, since I don't have any official role (maintainer or such) with respect to that driver or the WPAN stack, I think this would fit better:
Do you need Sascha to resubmit with the tags added ?
- Werner
David Miller
maintainerFrom: Werner Almesberger <[email protected]>
Date: Tue, 16 Apr 2013 00:16:58 -0300
Quoted 11 lines
Quoted 1 line · David Miller
"Acked-by: Werner ..." is most useful to me.
Hmm, since I don't have any official role (maintainer or such) with respect to that driver or the WPAN stack, I think this would fit better:
Reviewed-by Werner Almesberger <[email protected]>Tested-by Werner Almesberger <[email protected]>Do you need Sascha to resubmit with the tags added ?
He doesn't need to, an experienced developer would know that patchwork takes care of that for me :-)
David Miller
maintainerFrom: Sascha Herrmann <[email protected]>
Date: Mon, 15 Apr 2013 10:33:27 +0200
Quoted 8 lines
Changes to last version: Reordered local variable declarations.
The first patch add the option to configure the irq type of the plattform and the device. The second patch changes the irq handling when edge type interrupts are configured.
Without irq configuration of the irq type, the driver will remain backward compatible.
Series applied, thanks.