Update genericx86 and remove atom-pc

PATCH In review Darren Hart 2 participants 9 messages Aug 26, 2013 – Aug 27, 2013

lore

Share & tools

lore

Darren Hart

author

2013-08-26 22:14 UTC #1 lore raw

PATCH v2 1/6 meta-yocto-bsp/genericx86: Update kernel, branch, KMACHINE, and SRCREV

In reply to Darren Hart

For the genericx86 machine:
o Update the PREFERRED_VERSION for linux-yocto to 3.10
o Change the KBRANCH to common-pc/base
o Change the SRCREV to the HEAD
o Change the KMACHINE to a valid linux-yocto BSP name

Signed-off-by Darren Hart <[email protected]>

Cc Ross Burton <[email protected]>

---
 meta-yocto-bsp/conf/machine/genericx86.conf        |    2 +-
 .../recipes-kernel/linux/linux-yocto_3.10.bbappend |    6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

meta-yocto-bsp/conf/machine/genericx86.conf +1 -1

index 042f206..ff5cbc9 100644
@@ -10,7 +10,7 @@ MACHINE_FEATURES = "screen keyboard pci usbhost ext2 ext3 x86 wifi acpi alsa"
 KERNEL_IMAGETYPE = "bzImage"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.8%"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
 XSERVER ?= "xserver-xorg \
            xserver-xorg-extension-glx \

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.10.bbappend +4 -2

index 1ac014e..9639a56 100644
@@ -1,11 +1,13 @@
 KBRANCH_atom-pc  = "standard/common-pc/atom-pc"
-KBRANCH_genericx86  = "standard/common-pc/atom-pc"
+KBRANCH_genericx86  = "standard/common-pc/base"
 KBRANCH_routerstationpro = "standard/routerstationpro"
 KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 KBRANCH_beagleboard = "standard/beagleboard"
 
+KMACHINE_genericx86 ?= "common-pc"
+
 SRCREV_machine_atom-pc ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
-SRCREV_machine_genericx86 ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
+SRCREV_machine_genericx86 ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
 SRCREV_machine_routerstationpro ?= "3991d03bd450e9363d5b6e97ede0628ba073db79"
 SRCREV_machine_mpc8315e-rdb ?= "8d8339af518104db03f9c36b82f4372569e55b0a"
 SRCREV_machine_beagleboard ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #2 lore raw

PATCH v2 2/6 meta-yocto-bsp: Purge atom-pc in favor of genericx86

genericx86 is a superset of atom-pc, so remove all references to atom-pc.

Note that genericx86 only has 3.10 linux-yocto support, that leaves us with no x86 BSP in meta-yocto-bsp for the 3.4 kernel. As a general rule, new BSPs are targeted at the current kernel version, so this is normal, but something worth noting.

Signed-off-by Darren Hart <[email protected]>

Cc Ross Burton <[email protected]>

---
 meta-yocto-bsp/conf/machine/atom-pc.conf           |   37 --------------------
 .../packagegroup-core-tools-profile.bbappend       |    1 -
 .../packagegroup-core-sdk-gmae.bbappend            |    1 -
 ...egroup-core-standalone-gmae-sdk-target.bbappend |    1 -
 .../recipes-kernel/linux/linux-yocto_3.10.bbappend |    3 --
 .../recipes-kernel/linux/linux-yocto_3.4.bbappend  |    3 --
 .../recipes-kernel/linux/linux-yocto_3.8.bbappend  |    3 --
 7 files changed, 49 deletions(-)
 delete mode 100644 meta-yocto-bsp/conf/machine/atom-pc.conf

meta-yocto-bsp/conf/machine/atom-pc.conf deleted +0 ~~-37~~

deleted file mode 100644
index 6318d60..0000000
@@ -1,37 +0,0 @@
-#@TYPE: Machine
-#@NAME: Atom-PC
-
-#@DESCRIPTION: Machine configuration for Intel Atom based PCs. Currently supported machines are the Asus eee901, Acer Aspire One, Toshiba NB305, and Intel BlackSand development board.
-
-include conf/machine/include/tune-atom.inc
-
-MACHINE_FEATURES = "screen keyboard pci usbhost ext2 ext3 x86 wifi acpi alsa"
-
-KERNEL_IMAGETYPE = "bzImage"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "3.8%"
-PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
-XSERVER ?= "xserver-xorg \
-           xserver-xorg-extension-glx \
-           xf86-input-mouse \
-           xf86-input-keyboard \
-           xf86-input-evdev \
-           xf86-input-synaptics \
-           xf86-video-intel \
-           mesa-driver-i915 \
-           mesa-driver-i965"
-
-#MACHINE_EXTRA_RDEPENDS = "rt2860"
-
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts"
-
-IMAGE_FSTYPES ?= "ext3 cpio.gz live"
-
-APPEND += "usbcore.autosuspend=1"
-
-GLIBC_ADDONS = "nptl"
-
-EXTRA_OECONF_append_pn-matchbox-panel-2 = " --with-battery=acpi"
-
-ROOTLESS_X = "1"

meta-yocto-bsp/recipes-core/packagegroups/packagegroup-core-tools-profile.bbappend +0 -1

index e3aa5e8..f86595c 100644
@@ -1,3 +1,2 @@
-RDEPENDS_${PN}_append_atom-pc = " lttng-ust systemtap"
 RDEPENDS_${PN}_append_genericx86 = " lttng-ust systemtap"

meta-yocto-bsp/recipes-gnome/packagegroups/packagegroup-core-sdk-gmae.bbappend +0 -1

index d7de19f..ddc54bb 100644
@@ -1,2 +1 @@
-SDK-EXTRAS_atom-pc ?= " lttng-ust-dev"
 SDK-EXTRAS_genericx86 ?= " lttng-ust-dev"

meta-yocto-bsp/recipes-gnome/packagegroups/packagegroup-core-standalone-gmae-sdk-target.bbappend +0 -1

index d7de19f..ddc54bb 100644
@@ -1,2 +1 @@
-SDK-EXTRAS_atom-pc ?= " lttng-ust-dev"
 SDK-EXTRAS_genericx86 ?= " lttng-ust-dev"

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.10.bbappend +0 -3

index 9639a56..5756e4c 100644
@@ -1,4 +1,3 @@
-KBRANCH_atom-pc  = "standard/common-pc/atom-pc"
 KBRANCH_genericx86  = "standard/common-pc/base"
 KBRANCH_routerstationpro = "standard/routerstationpro"
 KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"

@@ -6,7 +5,6 @@ KBRANCH_beagleboard = "standard/beagleboard"
 
 KMACHINE_genericx86 ?= "common-pc"
 
-SRCREV_machine_atom-pc ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
 SRCREV_machine_genericx86 ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
 SRCREV_machine_routerstationpro ?= "3991d03bd450e9363d5b6e97ede0628ba073db79"
 SRCREV_machine_mpc8315e-rdb ?= "8d8339af518104db03f9c36b82f4372569e55b0a"

@@ -15,7 +13,6 @@ SRCREV_machine_beagleboard ?= "6c1528b2b78d1ec7e75bb7a9880074ec35aa1aa0"
 COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
 COMPATIBLE_MACHINE_routerstationpro = "routerstationpro"
 COMPATIBLE_MACHINE_beagleboard = "beagleboard"
-COMPATIBLE_MACHINE_atom-pc = "atom-pc"
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 
 # routerstationpro has a flash size of 16mb

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.4.bbappend +0 -3

index 160bcbb..7c2bd67 100644
@@ -1,9 +1,7 @@
-KBRANCH_atom-pc  = "standard/common-pc/atom-pc"
 KBRANCH_routerstationpro = "standard/routerstationpro"
 KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 KBRANCH_beagleboard = "standard/beagleboard"
 
-SRCREV_machine_atom-pc ?= "cdd7a546922ca1c46c94adeec3b9c90dc9aaad2d"
 SRCREV_machine_genericx86 ?= "cdd7a546922ca1c46c94adeec3b9c90dc9aaad2d"
 SRCREV_machine_routerstationpro ?= "62b86dc8ac794cd97c61a99418d7429e6a83ec1a"
 SRCREV_machine_mpc8315e-rdb ?= "b2f78892b3ff6cc940e4661f7b2017a73b289c73"

@@ -12,7 +10,6 @@ SRCREV_machine_beagleboard ?= "cdd7a546922ca1c46c94adeec3b9c90dc9aaad2d"
 COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
 COMPATIBLE_MACHINE_routerstationpro = "routerstationpro"
 COMPATIBLE_MACHINE_beagleboard = "beagleboard"
-COMPATIBLE_MACHINE_atom-pc = "atom-pc"
 
 # routerstationpro has a flash size of 16mb
 KERNEL_IMAGE_MAXSIZE_append_routerstationpro = "16777216"

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.8.bbappend +0 -3

index 51c3736..216b384 100644
@@ -1,10 +1,8 @@
-KBRANCH_atom-pc  = "standard/common-pc/atom-pc"
 KBRANCH_genericx86  = "standard/common-pc/base"
 KBRANCH_routerstationpro = "standard/routerstationpro"
 KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 KBRANCH_beagleboard = "standard/beagleboard"
 
-SRCREV_machine_atom-pc ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
 SRCREV_machine_genericx86 ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
 SRCREV_machine_routerstationpro ?= "4a94f39d429fa284ce69b13bb635b29b1319e372"
 SRCREV_machine_mpc8315e-rdb ?= "f467c72937de0e4a2a66e21b9855c4aee844f936"

@@ -13,7 +11,6 @@ SRCREV_machine_beagleboard ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
 COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
 COMPATIBLE_MACHINE_routerstationpro = "routerstationpro"
 COMPATIBLE_MACHINE_beagleboard = "beagleboard"
-COMPATIBLE_MACHINE_atom-pc = "atom-pc"
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 
 # routerstationpro has a flash size of 16mb

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #3 lore raw

PATCH v2 3/6 layer.conf: Bumping LAYERVERSION_yoctobsp to account for atom-pc

In reply to Darren Hart

From: Elizabeth Flanagan <[email protected]>

In order to maintain autobuilder compatibility with prior releases we'll need to decide on if we should build atom-pc or genericx86 based on LAYERVERSION_yoctobsp.

if LAYERVERSION_yoctobsp < 2 we build out atom-pc else we build out genericx86

Signed-off-by Elizabeth Flanagan <[email protected]>

Cc Ross Burton <[email protected]>

Signed-off-by Darren Hart <[email protected]>

---
 meta-yocto-bsp/conf/layer.conf |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

meta-yocto-bsp/conf/layer.conf +1 -1

index 2be7cc3..9e416fe 100644
@@ -8,4 +8,4 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
 BBFILE_COLLECTIONS += "yoctobsp"
 BBFILE_PATTERN_yoctobsp = "^${LAYERDIR}/"
 BBFILE_PRIORITY_yoctobsp = "5"
-
+LAYERVERSION_yoctobsp = "2"

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #4 lore raw

PATCH v2 4/6 local.conf.sample: Replace atom-pc with genericx86

In reply to Darren Hart

Update the sample local.conf file to reflect the recent replacement of atom-pc with genericx86.

Signed-off-by Darren Hart <[email protected]>

Cc Ross Burton <[email protected]>

---
 meta-yocto/conf/local.conf.sample |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

meta-yocto/conf/local.conf.sample +1 -1

index b6c26d5..6f71a9f 100644
@@ -42,7 +42,7 @@
 # There are also the following hardware board target machines included for 
 # demonstration purposes:
 #
-#MACHINE ?= "atom-pc"
+#MACHINE ?= "genericx86"
 #MACHINE ?= "beagleboard"
 #MACHINE ?= "genericx86"
 #MACHINE ?= "mpc8315e-rdb"

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #5 lore raw

PATCH v2 5/6 README.hardware: Replace atom-pc with genericx86

In reply to Darren Hart

Update README.hardware to reflect the recent replacement of atom-pc with genericx86.

Signed-off-by Darren Hart <[email protected]>

Cc Ross Burton <[email protected]>

Cc Scott Rifenbark <[email protected]>

---
 README.hardware |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

README.hardware +6 -6

index e22fc08..3686759 100644
@@ -59,7 +59,7 @@ Consumer Devices
 
 The following consumer devices are supported by the meta-yocto-bsp layer:
 
-  * Intel Atom based PCs and devices (atom-pc)
+  * Intel x86 based PCs and devices (genericx86)
 
 For more information see the device's section below. The appropriate MACHINE
 variable value corresponding to the device is given in brackets.

@@ -70,10 +70,10 @@ variable value corresponding to the device is given in brackets.
                       ===============================
 
 
-Intel Atom based PCs and devices (atom-pc)
+Intel x86 based PCs and devices (genericx86)
 ==========================================
 
-The atom-pc MACHINE is tested on the following platforms:
+The genericx86 MACHINE is tested on the following platforms:
 
   o Asus EeePC 901
   o Acer Aspire One

@@ -93,7 +93,7 @@ device as the following commands are run as root and are not reversable.
 USB Device:
   1. Build a live image. This image type consists of a simple filesystem
      without a partition table, which is suitable for USB keys, and with the
-     default setup for the atom-pc machine, this image type is built
+     default setup for the genericx86 machine, this image type is built
      automatically for any image you build. For example:
 
      $ bitbake core-image-minimal

@@ -101,7 +101,7 @@ USB Device:
   2. Use the "dd" utility to write the image to the raw block device. For
      example:
 
-     # dd if=core-image-minimal-atom-pc.hddimg of=/dev/sdb
+     # dd if=core-image-minimal-genericx86.hddimg of=/dev/sdb
 
   If the device fails to boot with "Boot error" displayed, or apparently
   stops just after the SYSLINUX version banner, it is likely the BIOS cannot

@@ -142,7 +142,7 @@ USB Device:
 
      # mkdir /tmp/image
      # mkdir /tmp/usbkey
-     # mount -o loop core-image-minimal-atom-pc.hddimg  /tmp/image
+     # mount -o loop core-image-minimal-genericx86.hddimg  /tmp/image
      # mount /dev/sdb4 /tmp/usbkey
      # cp -rf /tmp/image/* /tmp/usbkey

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #6 lore raw

PATCH v2 6/6 documentation: Replace atom-pc with genericx86 in the manuals

In reply to Darren Hart

Update the manuals to reflect the recent replacement of atom-pc with genericx86.

Signed-off-by Darren Hart <[email protected]>

Cc Ross Burton <[email protected]>

Cc Scott Rifenbark <[email protected]>

---
 documentation/dev-manual/dev-manual-model.xml  |    2 +-
 documentation/ref-manual/ref-variables.xml     |    2 +-
 documentation/ref-manual/technical-details.xml |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

documentation/dev-manual/dev-manual-model.xml +1 -1

index a59a447..efa50b0 100644
@@ -156,7 +156,7 @@
                     "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>" section in the
                     Yocto Project Board Support Package (BSP) Developer's Guide.</para>
                     <note>Four BSPs exist that are part of the
-                    Yocto Project release: <filename>atom-pc</filename>, <filename>beagleboard</filename>,
+                    Yocto Project release: <filename>genericx86</filename>, <filename>beagleboard</filename>,
                     <filename>mpc8315e</filename>, and <filename>routerstationpro</filename>.
                     The recipes and configurations for these four BSPs are located and dispersed
                     within the <link linkend='source-directory'>Source Directory</link>.

documentation/ref-manual/ref-variables.xml +1 -1

index afcf7a7..4ac67c3 100644
@@ -2784,7 +2784,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
      MACHINE ?= "qemuppc"
      MACHINE ?= "qemux86"
      MACHINE ?= "qemux86-64"
-     MACHINE ?= "atom-pc"
+     MACHINE ?= "genericx86"
      MACHINE ?= "beagleboard"
      MACHINE ?= "mpc8315e-rdb"
      MACHINE ?= "routerstationpro"

documentation/ref-manual/technical-details.xml +1 -1

index 1b67ca7..faf259b 100644
@@ -1875,7 +1875,7 @@
       DEFAULTTUNE = "x86-64-x32"
       baselib = "${@d.getVar('BASE_LIB_tune-' + (d.getVar('DEFAULTTUNE', True) \
          or 'INVALID'), True) or 'lib'}"
-      #MACHINE = "atom-pc"
+      #MACHINE = "genericx86"
       #DEFAULTTUNE = "core2-64-x32"
                     </literallayout></para></listitem>
                 <listitem><para>As usual, use BitBake to build an image that supports the x32 psABI.

Signature · 1 line

1.7.9.5

Darren Hart

author

2013-08-26 22:14 UTC #0 lore raw

v2 cover Update genericx86 and remove atom-pc

This series updates the genericx86 BSP to use the linux-yocto 3.10 recipe and fixes some of the meta-data related to that.

It also removes the atom-pc machine in favor of genericx86 which is a super set of atom-pc. This leaves us with no x86 linux-yocto 3.4 based BSP, but that is standard operating procedure when introducing new BSPs.

Boot tested on the Toshiba NB305 (Pineview) netbook. Ethernet and wifi are not currently supported and will need to be added in a SRCREV update after the linux-yocto meta-data for genericx86 has been augmented. The mode switching and Xorg graphics drivers work correctly, as do USB HID devices.

V2: Include documentation and config file changes

The following changes since commit 5c2d5f69e88eb1b5eac0ff71a0394a612af4b5d4:

meta-yocto: change default kernel to 3.10 (2013-08-26 11:22:34 -0700)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib dvhart/genericx86
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=dvhart/genericx86

Darren Hart (5):
meta-yocto-bsp/genericx86: Update kernel, branch, KMACHINE, and SRCREV
meta-yocto-bsp: Purge atom-pc in favor of genericx86 local.conf.sample: Replace atom-pc with genericx86 README.hardware: Replace atom-pc with genericx86
documentation: Replace atom-pc with genericx86 in the manuals

Elizabeth Flanagan (1):
layer.conf: Bumping LAYERVERSION_yoctobsp to account for atom-pc

 README.hardware                                    |   12 +++----
 documentation/dev-manual/dev-manual-model.xml      |    2 +-
 documentation/ref-manual/ref-variables.xml         |    2 +-
 documentation/ref-manual/technical-details.xml     |    2 +-
 meta-yocto-bsp/conf/layer.conf                     |    2 +-
 meta-yocto-bsp/conf/machine/atom-pc.conf           |   37 --------------------
 meta-yocto-bsp/conf/machine/genericx86.conf        |    2 +-
 .../packagegroup-core-tools-profile.bbappend       |    1 -
 .../packagegroup-core-sdk-gmae.bbappend            |    1 -
 ...egroup-core-standalone-gmae-sdk-target.bbappend |    1 -
 .../recipes-kernel/linux/linux-yocto_3.10.bbappend |    9 +++--
 .../recipes-kernel/linux/linux-yocto_3.4.bbappend  |    3 --
 .../recipes-kernel/linux/linux-yocto_3.8.bbappend  |    3 --
 meta-yocto/conf/local.conf.sample                  |    2 +-
 14 files changed, 16 insertions(+), 63 deletions(-)
 delete mode 100644 meta-yocto-bsp/conf/machine/atom-pc.conf

Signature · 1 line

1.7.9.5

Paul Eggleton

2013-08-27 09:10 UTC #7 lore raw

Re: [PATCH 6/6] documentation: Replace atom-pc with genericx86 in the manuals

In reply to Darren Hart

Hi Darren,

Quoted 54 lines · On Monday 26 August 2013 15:18:12 Darren Hart wrote:

Update the manuals to reflect the recent replacement of atom-pc with genericx86.
Signed-off-by Darren Hart <[email protected]>
Cc Ross Burton <[email protected]>
Cc Scott Rifenbark <[email protected]>
---
 documentation/dev-manual/dev-manual-model.xml  |    2 +-
 documentation/ref-manual/ref-variables.xml     |    2 +-
 documentation/ref-manual/technical-details.xml |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
(quoted diff) +0 -0
b/documentation/dev-manual/dev-manual-model.xml index a59a447..efa50b0 100644
documentation/dev-manual/dev-manual-model.xml +0 -0
@@ -156,7 +156,7 @@
                     "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP
 Layers</ulink>" section in the Yocto Project Board Support Package (BSP)
Developer's Guide.</para> <note>Four BSPs exist that are part of the
- Yocto Project release: <filename>atom-pc</filename>,
<filename>beagleboard</filename>, + Yocto Project
release: <filename>genericx86</filename>, <filename>beagleboard</filename>, <filename>mpc8315e</filename>, and <filename>routerstationpro</filename>. The recipes and configurations for these four BSPs are located and dispersed within the <link linkend='source-directory'>Source Directory</link>. diff --git a/documentation/ref-manual/ref-variables.xml b/documentation/ref-manual/ref-variables.xml index afcf7a7..4ac67c3 100644
documentation/ref-manual/ref-variables.xml +0 -0
@@ -2784,7 +2784,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR =
"${INC_PR}.3" MACHINE ?= "qemuppc"
      MACHINE ?= "qemux86"
      MACHINE ?= "qemux86-64"
documentation/ref-manual/ref-variables.xml +1 -1
-     MACHINE ?= "atom-pc"
+     MACHINE ?= "genericx86"
      MACHINE ?= "beagleboard"
      MACHINE ?= "mpc8315e-rdb"
      MACHINE ?= "routerstationpro"
(quoted diff) +0 -0
b/documentation/ref-manual/technical-details.xml index 1b67ca7..faf259b 100644
documentation/ref-manual/technical-details.xml +0 -0
@@ -1875,7 +1875,7 @@
       DEFAULTTUNE = "x86-64-x32"
       baselib = "${@d.getVar('BASE_LIB_tune-' + (d.getVar('DEFAULTTUNE',
True) \ or 'INVALID'), True) or 'lib'}"
documentation/ref-manual/technical-details.xml +1 -1
-      #MACHINE = "atom-pc"
+      #MACHINE = "genericx86"
       #DEFAULTTUNE = "core2-64-x32"
                     </literallayout></para></listitem>
                 <listitem><para>As usual, use BitBake to build an image

Quoted 1 line

that supports the x32 psABI.

This patch needs to be made against yocto-docs and sent to the yocto list (CC Scott).

Cheers,
Paul

Signature · 2 lines

Paul Eggleton
Intel Open Source Technology Centre

Darren Hart

author

2013-08-27 15:29 UTC #8 lore raw

Re: [PATCH 6/6] documentation: Replace atom-pc with genericx86 in the manuals

Quoted 15 lines · Paul Eggleton

Hi Darren,
Quoted 12 lines · On Monday 26 August 2013 15:18:12 Darren Hart wrote:
Update the manuals to reflect the recent replacement of atom-pc with genericx86.
Signed-off-by Darren Hart <[email protected]>
Cc Ross Burton <[email protected]>
Cc Scott Rifenbark <[email protected]>
---
 documentation/dev-manual/dev-manual-model.xml  |    2 +-
 documentation/ref-manual/ref-variables.xml     |    2 +-
 documentation/ref-manual/technical-details.xml |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

...

Quoted 2 lines

This patch needs to be made against yocto-docs and sent to the yocto list (CC Scott).

Done. Thanks Paul.

Signature · 3 lines

Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel