linux-libc-headers: do_install: fix "Argument list too long" error
cover linux-libc-headers: do_install: fix "Argument list too long" error
Hi Saul and Bruce,
This patch is only for linux-libc-headers, the linux-yocto also has the file Makefile.headersinst, but we don't use it when build linux-yocto, so it works well, I'm not sure whether we should apply this to linux-yocto.
// Robert
The following changes since commit c6dc3cb329428e92cb035be504e044c1c3c0e939:
icu-native: do_install: Segmentation fault (2013-09-12 05:29:07 -0400)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib robert/linux_headers
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/linux_headers
Robert Yang (1):
linux-libc-headers: do_install: fix "Argument list too long" error
...cripts-Makefile.headersinst-args-too-long.patch | 36 ++++++++++++++++++++ .../linux-libc-headers/linux-libc-headers_3.10.bb | 1 + 2 files changed, 37 insertions(+) create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch
Signature · 1 line
1.7.10.4
PATCH 1/1 linux-libc-headers: do_install: fix "Argument list too long" error
There would be an "Argument list too long" error when the TMPDIR is in a deep dir, for example, when "len(readlink -f TMPDIR) >= 350 (our supported value is 410)". Use "$(foreach ,,$(shell echo))" to fix it.
[YOCTO #5138]
--- ...cripts-Makefile.headersinst-args-too-long.patch | 36 ++++++++++++++++++++ .../linux-libc-headers/linux-libc-headers_3.10.bb | 1 + 2 files changed, 37 insertions(+) create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +36 -0
@@ -0,0 +1,36 @@ +Makefile.headersinst: fix "Argument list too long" error + +There would be an "Argument list too long" error when the src is in a +deep dir, for example, when "len(readlink -f src_dir) >= 400", use +"$(foreach ,,$(shell echo))" to fix it. + +Upstream-Status: Pending + +Signed-off-by: Robert Yang <[email protected]> +--- + scripts/Makefile.headersinst | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst +--- a/scripts/Makefile.headersinst ++++ b/scripts/Makefile.headersinst +@@ -98,10 +98,15 @@ __headersinst: $(subdirs) $(install-file) + @: + + targets += $(install-file) ++# Use the $(foreach ,,$(shell echo)) to avoid the "Argument list too ++# long" error, and use the "$(shell echo)" rather than "echo" to keep ++# the order. + $(install-file): scripts/headers_install.sh $(input-files) FORCE + $(if $(unwanted),$(call cmd,remove),) + $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@))) +- @echo $(input-files) > $(INSTALL_HDR_PATH)/.input-files ++ $(shell echo -n > $(INSTALL_HDR_PATH)/.input-files) ++ $(foreach f,$(input-files),$(shell echo -n "$(f) " >> \ ++ $(INSTALL_HDR_PATH)/.input-files)) + $(call if_changed,install) + @rm $(INSTALL_HDR_PATH)/.input-files + +-- +1.7.10.4 +
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +1 -0
@@ -2,6 +2,7 @@ require linux-libc-headers.inc SRC_URI += "file://0001-ptrace.h-remove-ptrace_peeksiginfo_args.patch" SRC_URI += "file://scripts-Makefile.headersinst-install-headers-from-sc.patch" +SRC_URI += "file://scripts-Makefile.headersinst-args-too-long.patch" SRC_URI[md5sum] = "72d0a9b3e60cd86fabcd3f24b1708944" SRC_URI[sha256sum] = "46c9e55e1fddf40813b8d697d5645037a8e2af5c1a8dff52b3fe82b5021582b8"
Signature · 1 line
1.7.10.4
Quoted 1 line · Robert Yang
Hi Saul and Bruce,
You need to cc me directly on patches like this. I nearly missed this in the storm
of morning email.
Quoted 5 lines
This patch is only for linux-libc-headers, the linux-yocto also has the file Makefile.headersinst, but we don't use it when build linux-yocto, so it works well, I'm not sure whether we should apply this to linux-yocto.
No, we don't need to apply it to linux-yocto, this is a very specific case, that we've
been trying to get sorted out upstream .. with no luck yet. But since we don't install headers from the kernel tree itself at the moment, and even if we do, it isn't
from such a deep directory path, there's no need to carry a change.
That being said, I have issues with the patch, I'll follow up on that email directly.
Bruce
Quoted 27 lines
// Robert
The following changes since commit
c6dc3cb329428e92cb035be504e044c1c3c0e939:icu-native:
do_install: Segmentation fault (2013-09-12 05:29:07 -0400)are available in the git repository at:
git://git.pokylinux.org/poky-contribrobert/linux_headers
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/linux_headersRobert Yang (1):
linux-libc-headers:do_install: fix "Argument list too long" error...cripts-Makefile.headersinst-args-too-long.patch | 36 ++++++++++++++++++++ .../linux-libc-headers/linux-libc-headers_3.10.bb | 1 + 2 files changed, 37 insertions(+) create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch--
1.7.10.4_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"
Quoted 19 lines · Robert Yang
There would be an "Argument list too long" error when the TMPDIR is in a deep dir, for example, when "len(readlink -f TMPDIR) >= 350 (our supported value is 410)". Use "$(foreach ,,$(shell echo))" to fix it.
[YOCTO #5138]
Signed-off-by Robert Yang <[email protected]>--- ...cripts-Makefile.headersinst-args-too-long.patch | 36 ++++++++++++++++++++ .../linux-libc-headers/linux-libc-headers_3.10.bb | 1 + 2 files changed, 37 insertions(+) create mode 100644 meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patchmeta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +0
-0
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch line 7
Quoted 7 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +7
-0@@ -0,0 +1,36 @@ +Makefile.headersinst: fix "Argument list too long" error + +There would be an "Argument list too long" error when the src is in a +deep dir, for example, when "len(readlink -f src_dir) >= 400", use +"$(foreach ,,$(shell echo))" to fix it. + +Upstream-Status: Pending
Put this as inappropriate. I've already tried to submit these upstream, and they didn't
work. So just tag them as yocto specific, and I'll continue to work upstream on the
issue.
Quoted 34 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +29
-0+ +Signed-off-by: Robert Yang <[email protected]> +--- + scripts/Makefile.headersinst | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst +--- a/scripts/Makefile.headersinst ++++ b/scripts/Makefile.headersinst +@@ -98,10 +98,15 @@ __headersinst: $(subdirs) $(install-file) + @: + + targets += $(install-file) ++# Use the $(foreach ,,$(shell echo)) to avoid the "Argument list too ++# long" error, and use the "$(shell echo)" rather than "echo" to keep ++# the order. + $(install-file): scripts/headers_install.sh $(input-files) FORCE + $(if $(unwanted),$(call cmd,remove),) + $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@))) +- @echo $(input-files) > $(INSTALL_HDR_PATH)/.input-files ++ $(shell echo -n > $(INSTALL_HDR_PATH)/.input-files) ++ $(foreach f,$(input-files),$(shell echo -n "$(f) " >> \ ++ $(INSTALL_HDR_PATH)/.input-files)) + $(call if_changed,install) + @rm $(INSTALL_HDR_PATH)/.input-files + +-- +1.7.10.4 +meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +0
-0
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb require linux-libc-headers.inc · line 5
Quoted 4 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +1
-0@@ -2,6 +2,7 @@ require linux-libc-headers.inc SRC_URI += "file://0001-ptrace.h-remove-ptrace_peeksiginfo_args.patch" SRC_URI += "file://scripts-Makefile.headersinst-install-headers-from-sc.patch" +SRC_URI += "file://scripts-Makefile.headersinst-args-too-long.patch"
When you looked at this .. didn't it strike you as wrong ? We already have a patch
that was attempting to fix the same problem.
Technically even the foreach can still become to large and blow out the shells processing capabilities .. I know, since I wrote the same for loop at one point.
That being said, if you have reproduced the problem and can show that this does fix at least the problem at hand, I'm ok with the change ..
BUT, it needs to be squashed into the previous patch and have both our Sign-offs left in the single patch.
Cheers,
Bruce
Quoted 10 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +0
-1SRC_URI[md5sum] = "72d0a9b3e60cd86fabcd3f24b1708944" SRC_URI[sha256sum] = "46c9e55e1fddf40813b8d697d5645037a8e2af5c1a8dff52b3fe82b5021582b8" --1.7.10.4
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"
Quoted 69 lines · Bruce Ashfield
Quoted 19 lines · Robert Yang
There would be an "Argument list too long" error when the TMPDIR is in a deep dir, for example, when "len(readlink -f TMPDIR) >= 350 (our supported value is 410)". Use "$(foreach ,,$(shell echo))" to fix it.
[YOCTO #5138]
Signed-off-by Robert Yang <[email protected]>--- ...cripts-Makefile.headersinst-args-too-long.patch | 36 ++++++++++++++++++++ .../linux-libc-headers/linux-libc-headers_3.10.bb | 1 + 2 files changed, 37 insertions(+)create mode 100644
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patchmeta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +0
-0meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch line 7
Quoted 7 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +7
-0@@ -0,0 +1,36 @@ +Makefile.headersinst: fix "Argument list too long" error + +There would be an "Argument list too long" error when the src is in a +deep dir, for example, when "len(readlink -f src_dir) >= 400", use +"$(foreach ,,$(shell echo))" to fix it. + +Upstream-Status: PendingPut this as inappropriate. I've already tried to submit these upstream, and they didn't
work. So just tag them as yocto specific, and I'll continue to work upstream on the
issue.Quoted 35 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers/scripts-Makefile.headersinst-args-too-long.patch new file +29
-0+ +Signed-off-by: Robert Yang <[email protected]> +--- + scripts/Makefile.headersinst | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst +--- a/scripts/Makefile.headersinst ++++ b/scripts/Makefile.headersinst +@@ -98,10 +98,15 @@ __headersinst: $(subdirs) $(install-file) + @: + + targets += $(install-file) ++# Use the $(foreach ,,$(shell echo)) to avoid the "Argument list too ++# long" error, and use the "$(shell echo)" rather than "echo" to keep ++# the order. + $(install-file): scripts/headers_install.sh $(input-files) FORCE + $(if $(unwanted),$(call cmd,remove),) + $(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@))) +- @echo $(input-files) > $(INSTALL_HDR_PATH)/.input-files ++ $(shell echo -n > $(INSTALL_HDR_PATH)/.input-files) ++ $(foreach f,$(input-files),$(shell echo -n "$(f) " >> \ ++ $(INSTALL_HDR_PATH)/.input-files)) + $(call if_changed,install) + @rm $(INSTALL_HDR_PATH)/.input-files + +-- +1.7.10.4 +meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +0
-0@@ -2,6 +2,7 @@ require linux-libc-headers.inc
Quoted 8 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb require linux-libc-headers.inc · line 5
Quoted 3 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +1
-0SRC_URI += "file://0001-ptrace.h-remove-ptrace_peeksiginfo_args.patch" SRC_URI += "file://scripts-Makefile.headersinst-install-headers-from-sc.patch" +SRC_URI += "file://scripts-Makefile.headersinst-args-too-long.patch"When you looked at this .. didn't it strike you as wrong ? We already have a patch
that was attempting to fix the same problem.
Sorry, I missed the previous patch, I will squash them into one.
Quoted 6 lines
Technically even the foreach can still become to large and blow out the shells processing capabilities .. I know, since I wrote the same for loop at one point.
That being said, if you have reproduced the problem and can show that this does fix at least the problem at hand, I'm ok with the change ..
Yes, this patch makes it work when len(TMPDIR) <= 410, this is what our sanity.bbclass checks, I will send a V2 sooner.
// Robert
Quoted 20 lines
BUT, it needs to be squashed into the previous patch and have both our Sign-offs left in the single patch.
Cheers,
Bruce
Quoted 10 lines
meta/recipes-kernel/linux-libc-headers/linux-libc-headers_3.10.bb +0
-1SRC_URI[md5sum] = "72d0a9b3e60cd86fabcd3f24b1708944" SRC_URI[sha256sum] = "46c9e55e1fddf40813b8d697d5645037a8e2af5c1a8dff52b3fe82b5021582b8" --1.7.10.4
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core