Skip to contentSkip to conversation

cpufreq: fix transition_ongoing count for powernow-k8

PATCH In review Viresh Kumar 2 participants 5 messages Sep 13, 2013 – Sep 14, 2013 CPU frequency scaling framework

lore
Share & tools
lore

Viresh Kumar

author maintainer
#0 lore raw

cover cpufreq: fix transition_ongoing count for powernow-k8

This has been running in my mind since few days... That we have fixed cpufreq core and all other drivers for transition serialization but what about powernow-k8? It is somewhat special (even more than exynos5440).. It queues a work from ->target() and may or maynot send notifications at all..

Finally I have got a solution now (detailed logs in the patch).. These must go with following patchset:

https://lkml.org/lkml/2013/9/12/173

Compile tested only..

Viresh Kumar (2):
cpufreq: Create cpufreq_transition_complete()
cpufreq: powernow-k8: mark freq transition complete on error cases

 drivers/cpufreq/cpufreq.c     | 25 ++++++++++++-----------
 drivers/cpufreq/powernow-k8.c | 47 +++++++++++++++++++++++++++++++------------
 include/linux/cpufreq.h       |  7 +++++++
 3 files changed, 54 insertions(+), 25 deletions(-)
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#1 lore raw

PATCH 1/2 cpufreq: Create cpufreq_transition_complete()

Following patch "cpufreq: make sure frequency transitions are serialized" guarantees that we don't have any races while changing cpu frequency or sending notifications. It handled a special case with CPUFREQ_ASYNC_NOTIFICATION flag for drivers that don't complete their freq change from ->target() and exynos5440 driver is well adopted to it as well..

There is one more driver powernow-k8 that has similar implementation, schedules a work for doing transitions. All is good if that work function does notifications on every call to it and so the transition_ongoing count stays stable. But there are chances that the work function may return without actually doing the notifications, in which case transition_ongoing count will not be set to zero and so no transitions would be possible after that.

This patch adds another routine cpufreq_transition_complete() which would be used by powernow-k8 (or even exynos5440 if required), that will be used to mark end of transition in such cases.

Later patch will change powernow-k8 to use this routine.

---
 drivers/cpufreq/cpufreq.c | 25 +++++++++++++------------
 include/linux/cpufreq.h   |  7 +++++++
 2 files changed, 20 insertions(+), 12 deletions(-)
drivers/cpufreq/cpufreq.c +13 -12
index f8b0889..cf283f3 100644
@@ -265,6 +265,16 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
 }
 #endif
 
+void cpufreq_transition_complete(struct cpufreq_policy *policy)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
+	policy->transition_ongoing--;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+}
+EXPORT_SYMBOL_GPL(cpufreq_transition_complete);
+
 static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 		struct cpufreq_freqs *freqs, unsigned int state)
 {
@@ -350,16 +360,12 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy,
 
 	if ((cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION)
 			&& (state == CPUFREQ_POSTCHANGE)) {
-		unsigned long flags;
-
 		/*
 		 * Some drivers don't send POSTCHANGE notification from their
 		 * ->target() but from some kind of bottom half and so we are
 		 * ending transaction here..
 		 */
-		write_lock_irqsave(&cpufreq_driver_lock, flags);
-		policy->transition_ongoing--;
-		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		cpufreq_transition_complete(policy);
 	}
 }
 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
@@ -1430,9 +1436,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 	if (cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION)
 		return;
 
-	write_lock_irqsave(&cpufreq_driver_lock, flags);
-	policy->transition_ongoing--;
-	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	cpufreq_transition_complete(policy);
 }
 
 /**
@@ -1754,10 +1758,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			&& (retval == -EINPROGRESS))
 		return retval;
 
-	write_lock_irqsave(&cpufreq_driver_lock, flags);
-	policy->transition_ongoing--;
-	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
-
+	cpufreq_transition_complete(policy);
 	return retval;
 }
 EXPORT_SYMBOL_GPL(__cpufreq_driver_target);
include/linux/cpufreq.h +7 -0
index c770bc0..10ab22d 100644
@@ -231,6 +231,13 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 
 const char *cpufreq_get_current_driver(void);
 
+/*
+ * Only for drivers which have CPUFREQ_ASYNC_NOTIFICATION flag set and they need
+ * to mark transaction over before starting any notifications, otherwise the
+ * POSTCHANGE notification already does this.
+ */
+void cpufreq_transition_complete(struct cpufreq_policy *policy);
+
 static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy,
 		unsigned int min, unsigned int max)
 {
Signature · 1 line
1.7.12.rc2.18.g61b472e
author maintainer
#2 lore raw

PATCH 2/2 cpufreq: powernow-k8: mark freq transition complete on error cases

In reply to Viresh Kumar

Following patch "cpufreq: make sure frequency transitions are serialized" guarantees that we don't have any races while changing cpu frequency or sending notifications. It handled a special case with CPUFREQ_ASYNC_NOTIFICATION flag for drivers that don't complete their freq change from ->target() and exynos5440 driver is well adopted to it as well..

There is one more driver powernow-k8 that has similar implementation, schedules a work for doing transitions. All is good if that work function does notifications on every call to it and so the transition_ongoing count stays stable. But there are chances that the work function may return without actually doing the notifications, in which case transition_ongoing count will not be set to zero and so no transitions would be possible after that.

This patch fixes powernow-k8 driver to get transition_ongoing count stable. It does following to ensure proper working of this driver:
- return -EINPROGRESS from ->target() so that core doesn't mark transfer over at the end of ->target().
- mark cpufreq_driver->flags with CPUFREQ_ASYNC_NOTIFICATION, so that core knows that driver would terminate its transition.
- call cpufreq_transition_complete() whenever we are returning before sending notifications

Hopefully things will work well after this patch, only compiled tested at my end.

---
 drivers/cpufreq/powernow-k8.c | 47 +++++++++++++++++++++++++++++++------------
 1 file changed, 34 insertions(+), 13 deletions(-)
drivers/cpufreq/powernow-k8.c +34 -13
index 2344a9e..8215bbc 100644
@@ -952,7 +952,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 	if ((data->currvid == vid) && (data->currfid == fid)) {
 		pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n",
 			fid, vid);
-		return 0;
+		return -EALREADY;
 	}
 
 	pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n",
@@ -993,22 +993,27 @@ static long powernowk8_target_fn(void *arg)
 	unsigned int newstate;
 	int ret;
 
-	if (!data)
-		return -EINVAL;
+	if (!data) {
+		ret = -EINVAL;
+		goto transition_complete;
+	}
 
 	checkfid = data->currfid;
 	checkvid = data->currvid;
 
 	if (pending_bit_stuck()) {
 		printk(KERN_ERR PFX "failing targ, change pending bit set\n");
-		return -EIO;
+		ret = -EIO;
+		goto transition_complete;
 	}
 
 	pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
 		pol->cpu, targfreq, pol->min, pol->max, relation);
 
-	if (query_current_values_with_pending_wait(data))
-		return -EIO;
+	if (query_current_values_with_pending_wait(data)) {
+		ret = -EIO;
+		goto transition_complete;
+	}
 
 	pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
 		 data->currfid, data->currvid);
@@ -1022,25 +1027,36 @@ static long powernowk8_target_fn(void *arg)
 	}
 
 	if (cpufreq_frequency_table_target(pol, data->powernow_table,
-				targfreq, relation, &newstate))
-		return -EIO;
+				targfreq, relation, &newstate)) {
+		ret = -EIO;
+		goto transition_complete;
+	}
 
 	mutex_lock(&fidvid_mutex);
 
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	ret = transition_frequency_fidvid(data, newstate);
+	mutex_unlock(&fidvid_mutex);
 
 	if (ret) {
-		printk(KERN_ERR PFX "transition frequency failed\n");
-		mutex_unlock(&fidvid_mutex);
-		return 1;
+		/* Not a error case, just need to mark transition complete */
+		if (ret == -EALREADY) {
+			ret = 0;
+		} else {
+			printk(KERN_ERR PFX "transition frequency failed\n");
+			ret = 1;
+		}
+		goto transition_complete;
 	}
-	mutex_unlock(&fidvid_mutex);
 
 	pol->cur = find_khz_freq_from_fid(data->currfid);
 
 	return 0;
+
+transition_complete:
+	cpufreq_transition_complete(pol);
+	return ret;
 }
 
 /* Driver entry point to switch to the target frequency */
@@ -1049,8 +1065,12 @@ static int powernowk8_target(struct cpufreq_policy *pol,
 {
 	struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
 					     .relation = relation };
+	int ret;
 
-	return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
+	ret = work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
+	if (!ret)
+		ret = -EINPROGRESS;	/* Mark transition as In-progress */
+	return ret;
 }
 
 /* Driver entry point to verify the policy and range of frequencies */
@@ -1233,6 +1253,7 @@ static struct freq_attr *powernow_k8_attr[] = {
 };
 
 static struct cpufreq_driver cpufreq_amd64_driver = {
+	.flags		= CPUFREQ_ASYNC_NOTIFICATION,
 	.verify		= powernowk8_verify,
 	.target		= powernowk8_target,
 	.bios_limit	= acpi_processor_get_bios_limit,
Signature · 1 line
1.7.12.rc2.18.g61b472e
#3 lore raw
In reply to Viresh Kumar
Quoted 7 lines · Viresh Kumar

This has been running in my mind since few days... That we have fixed cpufreq core and all other drivers for transition serialization but what about powernow-k8? It is somewhat special (even more than exynos5440).. It queues a work from ->target() and may or maynot send notifications at all..

Finally I have got a solution now (detailed logs in the patch).. These must go with following patchset:

The "must go" here is a totally wrong way of speaking about things, because I'm not sure I'll take this patch series yet.

Quoted 1 line

https://lkml.org/lkml/2013/9/12/173

Thanks,
Rafael

author maintainer
#4 lore raw
Quoted 6 lines · Rafael J. Wysocki
Quoted 5 lines · Viresh Kumar

This has been running in my mind since few days... That we have fixed cpufreq core and all other drivers for transition serialization but what about powernow-k8? It is somewhat special (even more than exynos5440).. It queues a work from ->target() and may or maynot send notifications at all..

Quoted 7 lines
Quoted 2 lines

Finally I have got a solution now (detailed logs in the patch).. These must go with following patchset:

The "must go" here is a totally wrong way of speaking about things, because I'm not sure I'll take this patch series yet.

Quoted 1 line

https://lkml.org/lkml/2013/9/12/173

The "must go" was about keeping all four patches together, rather than forcing you to take them all..

Sorry for the confusion..