Skip to contentSkip to conversation

runqemu: set qemuarm memory size back to 128MB

PATCH New Laurentiu Palcu 1 participant 2 messages Sep 20, 2013

lore
Share & tools
lore
#0 lore raw

cover runqemu: set qemuarm memory size back to 128MB

Hi,

I investigated this issue(#5133) for some time but failed to find the root cause, so far. I reverted the memory back to 128MB so that it can be tested on AB to see if the smart sanity tests (which was the cause for this increase) pass. Apparently, those tests failed only on x86 qemu machines. This patch is only a workaround, if a proper solution cannot be found in time for the release.

However, if there are people on this list that could help on tracking this down, feel free to reply to this. You can also find more info about the issue itself in the commit message.

Thanks,
Laurentiu

The following changes since commit 853bc53cd58a621918f0e5ce662dba263d1befb4:

qemu: Fix broken patch (2013-09-18 21:56:28 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib lpalcu/b5133_sudoku_savant_issue
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=lpalcu/b5133_sudoku_savant_issue

Laurentiu Palcu (1):
runqemu: set qemuarm memory size back to 128MB

 scripts/runqemu-internal |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 runqemu: set qemuarm memory size back to 128MB

The following commit, 6ccd4d6, increased the RAM size for qemu machines to 256MB due to some smart sanity tests failing on autobuilder because more memory was needed.

Unfortunately this leads to various, potentially dangerous, issues like the one observed during sudoku-savant project compilation:

collect: relinking
collect2: error: '_ZNK6sudoku5ClearINS_6SquareEEclERS1_' was assigned to 'board.rpo', but was not defined during recompilation, or vice versa board.o:(.rodata+0x8): undefined reference to sudoku::Clear<sudoku::Square>::operator()(sudoku::Square&) const' board.o:(.rodata+0x20): undefined reference to sudoku::Clear<sudoku::Sequence>::operator()(sudoku::Sequence&) const' board.o:(.rodata+0x34): undefined reference to `typeinfo for sudoku::Action<sudoku::Sequence>'
...AND THE LIST CONTINUES...
collect2: error: ld returned 1 exit status
make: *** [sudoku-savant] Error 1

After some tests, I found that the maximum amount of memory needed for sudoku to compile properly is 146MB(!?!).

My attempts to create a simpler test case (using templates), in order to replicate and isolate the issue failed. All the tests compiled just fine.

So, my guess is that this problem is certainly memory related but the cause might be hidden in any of the following: qemu versatile hw model, in the kernel or, highly unlikely but not impossible, the toolchain itself. The reason I don't really think the cause is in the toolchain is the fact that the compilation completes just fine for 128MB on qemuarm but also on other qemu machines (with 256MB of memory).

Since this issue might need lots of time to have a proper fix, I'll revert back to using 128MB for qemuarm for the time being.

[YOCTO #5133]

---
 scripts/runqemu-internal |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/runqemu-internal +1 -1
index 485119f..74b0c35 100755
@@ -48,7 +48,7 @@ else
             mem_size=256
             ;;
         "qemuarm")
-            mem_size=256
+            mem_size=128
             ;;
         "qemumicroblaze")
             mem_size=64
Signature · 1 line
1.7.9.5