Skip to contentSkip to conversation

Fixes for systemd's ptest

PATCH In review [email protected] 2 participants 5 messages Dec 23, 2013 – Dec 24, 2013

lore
Share & tools
lore
#0 lore raw

cover Fixes for systemd's ptest

From: Chen Qi <[email protected]>

The current status for systemd's ptest is not good. It has only two test cases. However, it's better to have something than nothing. So we need to make these two test cases actually have effect. This is what this patchset is trying to achieve.

//Chen Qi

The following changes since commit 005af45191ded6185c618c708181b31281e43092:

bitbake: fetch2: avoid printing "no checksum" error message twice (2013-12-22 14:29:13 +0000)

are available in the git repository at:

git://git.pokylinux.org/poky-contrib ChenQi/systemd-ptest
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=ChenQi/systemd-ptest

Chen Qi (2):
busybox: enable SEAMLESS_XZ by default
systemd: fix ptest to make it able to run on target

 meta/recipes-core/busybox/busybox/defconfig |    2 +-
 meta/recipes-core/systemd/systemd/run-ptest |    1 +
 meta/recipes-core/systemd/systemd_208.bb    |   12 ++++++++++--
 3 files changed, 12 insertions(+), 3 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/2 busybox: enable SEAMLESS_XZ by default

From: Chen Qi <[email protected]>

We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we couldn't extract tar.xz file while we could extract tar.gz file. Such situation would be somewhat confusing.

---
 meta/recipes-core/busybox/busybox/defconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-core/busybox/busybox/defconfig +1 -1
index f0e63c2..20cd147 100644
@@ -125,7 +125,7 @@ CONFIG_FEATURE_HWIB=y
 #
 # Archival Utilities
 #
-# CONFIG_FEATURE_SEAMLESS_XZ is not set
+CONFIG_FEATURE_SEAMLESS_XZ=y
 CONFIG_FEATURE_SEAMLESS_LZMA=y
 CONFIG_FEATURE_SEAMLESS_BZ2=y
 CONFIG_FEATURE_SEAMLESS_GZ=y
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH 2/2 systemd: fix ptest to make it able to run on target

In reply to [email protected]

From: Chen Qi <[email protected]>

This patch mainly involves four changes.
1. Ship the sys.tar.xz and extract it on target to avoid ELOOP error.
2. Make systemd-ptest rdepend on bash and perl as the test cases need them.
3. Fix paths in Makefile so that the test cases could run on target.
4. Install ${libdir}/udev/rules.d directory to make udev-test.pl work.

[YOCTO #5664]
[YOCTO #5673]
[YOCTO #5674]

---
 meta/recipes-core/systemd/systemd/run-ptest |    1 +
 meta/recipes-core/systemd/systemd_208.bb    |   12 ++++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)
meta/recipes-core/systemd/systemd/run-ptest +1 -0
index 0418bc9..2f6bd93 100644
@@ -1,2 +1,3 @@
+tar -C test -xJf test/sys.tar.xz
 make test/rules-test.sh.log
 make test/udev-test.pl.log
meta/recipes-core/systemd/systemd_208.bb +10 -2
index 372e73d..248a898 100644
@@ -120,11 +120,15 @@ do_install_ptest () {
        install ${S}/test/* ${D}${PTEST_PATH}/test
        install -m 0755  ${B}/test-udev ${D}${PTEST_PATH}/
        install -d ${D}${PTEST_PATH}/build-aux
+       cp ${S}/build-aux/test-driver ${D}${PTEST_PATH}/build-aux/
        cp -rf ${B}/rules ${D}${PTEST_PATH}/
+       # This directory needs to be there for udev-test.pl to work.
+       install -d ${D}${libdir}/udev/rules.d
        cp ${B}/Makefile ${D}${PTEST_PATH}/
-       cp ${S}/build-aux/test-driver ${D}${PTEST_PATH}/build-aux/
-       tar -C ${D}${PTEST_PATH}/test -xJf ${S}/test/sys.tar.xz
+       cp ${S}/test/sys.tar.xz ${D}${PTEST_PATH}/test
        sed -i 's/"tree"/"ls"/' ${D}${PTEST_PATH}/test/udev-test.pl
+       sed -i 's#${S}#${PTEST_PATH}#g' ${D}${PTEST_PATH}/Makefile
+       sed -i 's#${B}#${PTEST_PATH}#g' ${D}${PTEST_PATH}/Makefile
 }
 
 python populate_packages_prepend (){
@@ -147,6 +151,10 @@ FILES_${PN}-analyze = "${bindir}/systemd-analyze"
 FILES_${PN}-initramfs = "/init"
 RDEPENDS_${PN}-initramfs = "${PN}"
 
+# The test cases need perl and bash to run correctly.
+RDEPENDS_${PN}-ptest += "perl bash"
+FILES_${PN}-ptest += "${libdir}/udev/rules.d"
+
 FILES_${PN}-gui = "${bindir}/systemadm"
 
 FILES_${PN}-vconsole-setup = "${rootlibexecdir}/systemd/systemd-vconsole-setup \
Signature · 1 line
1.7.9.5
#2 lore raw

Re: [PATCH 1/2] busybox: enable SEAMLESS_XZ by default

In reply to [email protected]
Quoted 7 lines · On 12/23/2013 12:36 AM, [email protected] wrote:

From: Chen Qi <[email protected]>

We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we couldn't extract tar.xz file while we could extract tar.gz file. Such situation would be somewhat confusing.

It's also important to note how much bigger the busybox image grows when adding a new config options, so what's the increase in # of bytes?

Thanks
Sau!

Quoted 19 lines
---
  meta/recipes-core/busybox/busybox/defconfig |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-core/busybox/busybox/defconfig +1 -1
index f0e63c2..20cd147 100644
@@ -125,7 +125,7 @@ CONFIG_FEATURE_HWIB=y
  #
  # Archival Utilities
  #
-# CONFIG_FEATURE_SEAMLESS_XZ is not set
+CONFIG_FEATURE_SEAMLESS_XZ=y
  CONFIG_FEATURE_SEAMLESS_LZMA=y
  CONFIG_FEATURE_SEAMLESS_BZ2=y
  CONFIG_FEATURE_SEAMLESS_GZ=y
author
#3 lore raw

Re: [PATCH 1/2] busybox: enable SEAMLESS_XZ by default

Quoted 10 lines · Saul Wold
Quoted 7 lines · On 12/23/2013 12:36 AM, [email protected] wrote:

From: Chen Qi <[email protected]>

We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we couldn't extract tar.xz file while we could extract tar.gz file. Such situation would be somewhat confusing.

It's also important to note how much bigger the busybox image grows when adding a new config options, so what's the increase in # of bytes?

Hi Saul,

The total size increase is (511116 + 47184 - 499980 - 47184 = 11136) bytes.

Here's more data.
*) Before the change:
-rwxr-xr-x 2 chenqi chenqi 511116 Dec 23 02:44 tmp/work/i586-poky-linux/busybox/1.21.1-r0/packages-split/busybox/bin/busybox.nosuid -rwsr-xr-x 2 chenqi chenqi 47184 Dec 23 02:44 tmp/work/i586-poky-linux/busybox/1.21.1-r0/packages-split/busybox/bin/busybox.suid *) After the change:
-rwxr-xr-x 2 chenqi chenqi 499980 Dec 23 20:25 tmp/work/i586-poky-linux/busybox/1.21.1-r0/packages-split/busybox/bin/busybox.nosuid -rwsr-xr-x 2 chenqi chenqi 47184 Dec 23 20:25 tmp/work/i586-poky-linux/busybox/1.21.1-r0/packages-split/busybox/bin/busybox.suid

Best Regards,
Chen Qi

Quoted 23 lines

Thanks
Sau!

Quoted 19 lines
---
  meta/recipes-core/busybox/busybox/defconfig |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-core/busybox/busybox/defconfig +1 -1
index f0e63c2..20cd147 100644
@@ -125,7 +125,7 @@ CONFIG_FEATURE_HWIB=y
  #
  # Archival Utilities
  #
-# CONFIG_FEATURE_SEAMLESS_XZ is not set
+CONFIG_FEATURE_SEAMLESS_XZ=y
  CONFIG_FEATURE_SEAMLESS_LZMA=y
  CONFIG_FEATURE_SEAMLESS_BZ2=y
  CONFIG_FEATURE_SEAMLESS_GZ=y