Skip to contentSkip to conversation

ARM: dts: add initial Colibri VF61 board support

PATCH New stefan at agner.ch 2 participants 4 messages Apr 3, 2014 – Apr 6, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover ARM: dts: add initial Colibri VF61 board support

From: Stefan Agner <[email protected]>

This patches adds initial support for Toradex Colibri VF61 computer-on-module.

Changes since v1:
- Reorder DTS for better readability
- Dumped my broken version of the alphabet and reorderd vendor prefixes

Stefan Agner (2):
of: add vendor prefix for Toradex AG
ARM: dts: add initial Colibri VF61 board support

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/vf610-colibri.dts                | 123 +++++++++++++++++++++
 3 files changed, 125 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-colibri.dts
Signature · 1 line
1.9.1
#1 lore raw

PATCH v2 1/2 of: add vendor prefix for Toradex AG

From: Stefan Agner <[email protected]>

Adds toradex to the list of DT vendor prefixes.

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index e9d19e2..a8d84f4 100644
@@ -89,6 +89,7 @@ ste	ST-Ericsson
 stericsson	ST-Ericsson
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
+toradex	Toradex AG
 toshiba	Toshiba Corporation
 toumaz	Toumaz
 v3	V3 Semiconductor
Signature · 1 line
1.9.1
#2 lore raw

PATCH v2 2/2 ARM: dts: add initial Colibri VF61 board support

In reply to stefan at agner.ch

From: Stefan Agner <[email protected]>

Add initial Toradex Colibri VF61 board support. Ethernet, UART and SDHC cards are working. Cache latencies need to be a bit higher than vf610.dtsi suggests. Those values are validated by running multiple memory tests.

---
 arch/arm/boot/dts/Makefile          |   1 +
 arch/arm/boot/dts/vf610-colibri.dts | 123 ++++++++++++++++++++++++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-colibri.dts
arch/arm/boot/dts/Makefile +1 -0
index 23d7768..81b3885 100644
@@ -190,6 +190,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
arch/arm/boot/dts/vf610-colibri.dts new file +123 -0

123 lines not on this page · raw message

Signature · 1 line
1.9.1
Applied
#3 lore raw

v2 cover ARM: dts: add initial Colibri VF61 board support

In reply to stefan at agner.ch
Quoted 3 lines · stefan at agner.ch

Stefan Agner (2):
of: add vendor prefix for Toradex AG
ARM: dts: add initial Colibri VF61 board support

Applied both, thanks.