yocto-bsp 3.17 updates

index 44a80d2..4bbc96e 100644
@@ -9,19 +9,13 @@ PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
 XSERVER ?= "xserver-xorg \
            xf86-input-evdev \
            xf86-input-mouse \
-           xf86-video-omapfb \
+           xf86-video-fbdev \
            xf86-input-keyboard"
 
-# Ship all kernel modules by default
-MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-# Allow for MMC booting (required by the NAND-less Beagleboard XM)
 EXTRA_IMAGEDEPENDS += "u-boot"
 
-# Uncomment the following line to enable the hard floating point abi. Note that
-# this breaks some binary libraries and 3D (neither of which ship with
-# meta-yocto). For maximum compatibility, leave this disabled.
-#DEFAULTTUNE ?= "cortexa8hf-neon"
 {{ input type:"choicelist" name:"tunefile" prio:"40" msg:"Which machine tuning would you like to use?" default:"tune_cortexa8" }}
 {{ input type:"choice" val:"tune_arm1136jf_s" msg:"arm1136jf-s tuning optimizations" }}
 {{ input type:"choice" val:"tune_arm920t" msg:"arm920t tuning optimizations" }}

@@ -52,6 +46,7 @@ include conf/machine/include/tune-cortexa5.inc
 {{ if tunefile == "tune_cortexa7": }}
 include conf/machine/include/tune-cortexa7.inc
 {{ if tunefile == "tune_cortexa8": }}
+DEFAULTTUNE ?= "cortexa8hf-neon"
 include conf/machine/include/tune-cortexa8.inc
 {{ if tunefile == "tune_cortexa9": }}
 include conf/machine/include/tune-cortexa9.inc

@@ -75,9 +70,7 @@ include conf/machine/include/tune-xscale.inc
 IMAGE_FSTYPES += "tar.bz2 jffs2"
 EXTRA_IMAGECMD_jffs2 = "-lnp "
 
-# 2.6.37 and later kernels use OMAP_SERIAL, ttyO2
-# earlier kernels use ttyS2
-SERIAL_CONSOLE = "115200 ttyO2"
+SERIAL_CONSOLE = "115200 ttyO0"
 
 {{ if kernel_choice == "custom": preferred_kernel = "linux-yocto-custom" }}
 {{ if kernel_choice == "linux-yocto-dev": preferred_kernel = "linux-yocto-dev" }}

@@ -90,12 +83,13 @@ PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
 PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
 PREFERRED_VERSION_{{=preferred_kernel}} ?= "{{=preferred_kernel_version}}%"
 
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/omap3-beagle.dts ${S}/arch/arm/boot/dts/omap3-beagle-xm.dts"
+KERNEL_IMAGETYPE = "uImage"
+KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 
 SPL_BINARY = "MLO"
 UBOOT_SUFFIX = "img"
-{{ input type:"edit" name:"uboot_machine" prio:"40" msg:"Please specify a value for UBOOT_MACHINE:" default:"omap3_beagle_config" }}
+{{ input type:"edit" name:"uboot_machine" prio:"40" msg:"Please specify a value for UBOOT_MACHINE:" default:"am335x_evm_config" }}
 UBOOT_MACHINE = "{{=uboot_machine}}"
 {{ input type:"edit" name:"uboot_entrypoint" prio:"40" msg:"Please specify a value for UBOOT_ENTRYPOINT:" default:"0x80008000" }}
 UBOOT_ENTRYPOINT = "{{=uboot_entrypoint}}"

@@ -103,3 +97,5 @@ UBOOT_ENTRYPOINT = "{{=uboot_entrypoint}}"
 UBOOT_LOADADDRESS = "{{=uboot_loadaddress}}"
 
 MACHINE_FEATURES = "usbgadget usbhost vfat alsa"
+
+IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} MLO"

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..6144e3a
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"

new file mode 100644
index 0000000..e545efa
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

new file mode 100644
index 0000000..4fed004
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

index 03b7d84..663dddb 100644
@@ -2,22 +2,22 @@
 {{ input type:"boolean" name:"custom_kernel_remote" prio:"20" msg:"Is the custom kernel you'd like to use in a remote git repo? (y/n)" default:"y"}}
 
 {{ if kernel_choice == "custom" and custom_kernel_remote == "y": }}
-{{ input type:"edit-git-repo" name:"custom_kernel_remote_path" prio:"20" msg:"Please enter the full URI to the remote git repo (the default corresponds to linux-stable v3.13.9)" default:"git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git"}}
+{{ input type:"edit-git-repo" name:"custom_kernel_remote_path" prio:"20" msg:"Please enter the full URI to the remote git repo (the default corresponds to linux-stable v3.16.3)" default:"git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git"}}
 
 {{ if kernel_choice == "custom" and custom_kernel_remote == "n": }}
-{{ input type:"edit-git-repo" name:"custom_kernel_local_path" prio:"20" msg:"You've indicated that you're not using a remote git repo.  Please enter the full path to the local git repo you want to use (the default assumes a local linux-stable v3.13.9)" default:"/home/trz/yocto/kernels/linux-stable.git"}}
+{{ input type:"edit-git-repo" name:"custom_kernel_local_path" prio:"20" msg:"You've indicated that you're not using a remote git repo.  Please enter the full path to the local git repo you want to use (the default assumes a local linux-stable v3.16.3)" default:"/home/trz/yocto/kernels/linux-stable.git"}}
 
 {{ if kernel_choice == "custom": }}
 {{ input type:"boolean" name:"custom_kernel_need_kbranch" prio:"20" msg:"Do you need to use a specific (non-master) branch? (y/n)" default:"n"}}
 
 {{ if kernel_choice == "custom" and custom_kernel_need_kbranch == "y": }}
-{{ input type:"edit" name:"custom_kernel_kbranch" prio:"20" msg:"Please enter the branch you want to use (the default branch corresponds to the linux-stable 'linux-3.13.y' branch):" default:"linux-3.13.y"}}
+{{ input type:"edit" name:"custom_kernel_kbranch" prio:"20" msg:"Please enter the branch you want to use (the default branch corresponds to the linux-stable 'linux-3.16.y' branch):" default:"linux-3.16.y"}}
 
 {{ if kernel_choice == "custom": }}
 {{ input type:"edit" name:"custom_kernel_srcrev" prio:"20" msg:"Please enter the SRCREV (commit id) you'd like to use (use '${AUTOREV}' to track the current HEAD):" default:"${AUTOREV}"}}
 
 {{ if kernel_choice == "custom": }}
-{{ input type:"edit" name:"custom_kernel_linux_version" prio:"20" msg:"Please enter the Linux version of the kernel you've specified:" default:"3.13.9"}}
+{{ input type:"edit" name:"custom_kernel_linux_version" prio:"20" msg:"Please enter the Linux version of the kernel you've specified:" default:"3.16.3"}}
 
 {{ if kernel_choice == "custom": }}
 {{ input type:"edit" name:"custom_kernel_linux_version_extension" prio:"20" msg:"Please enter a Linux version extension if you want (it will show up at the end of the kernel name shown by uname):" default:"-custom"}}

index 0df4dc2..660eb6d 100644
@@ -32,19 +32,23 @@ MACHINE_FEATURES += "wifi efi pcbios"
 
 {{ input type:"boolean" name:"xserver" prio:"50" msg:"Do you need support for X? (y/n)" default:"y" }}
 
-{{ if xserver == "y" and (kernel_choice == "linux-yocto_3.14" or kernel_choice == "linux-yocto_3.10"): }}
-{{ input type:"choicelist" name:"xserver_choice" prio:"50" msg:"Please select an xserver for this machine:" default:"xserver_i915" }}
+{{ if xserver == "y" and (kernel_choice == "linux-yocto_3.17" or kernel_choice == "linux-yocto_3.14" or kernel_choice == "linux-yocto_3.10"): }}
+{{ input type:"choicelist" name:"xserver_choice" prio:"50" msg:"Please select an xserver for this machine:" default:"xserver_vesa" }}
 {{ input type:"choice" val:"xserver_vesa" msg:"VESA xserver support" }}
 {{ input type:"choice" val:"xserver_i915" msg:"i915 xserver support" }}
 {{ input type:"choice" val:"xserver_i965" msg:"i965 xserver support" }}
+{{ input type:"choice" val:"xserver_fbdev" msg:"fbdev xserver support" }}
+{{ input type:"choice" val:"xserver_modesetting" msg:"modesetting xserver support" }}
 
 {{ if xserver == "y" and kernel_choice == "custom": }}
-{{ input type:"choicelist" name:"xserver_choice" prio:"50" msg:"Please select an xserver for this machine:" default:"xserver_i915" }}
+{{ input type:"choicelist" name:"xserver_choice" prio:"50" msg:"Please select an xserver for this machine:" default:"xserver_vesa" }}
 {{ input type:"choice" val:"xserver_vesa" msg:"VESA xserver support" }}
 {{ input type:"choice" val:"xserver_i915" msg:"i915 xserver support" }}
 {{ input type:"choice" val:"xserver_i965" msg:"i965 xserver support" }}
+{{ input type:"choice" val:"xserver_fbdev" msg:"fbdev xserver support" }}
+{{ input type:"choice" val:"xserver_modesetting" msg:"modesetting xserver support" }}
 
-{{ if xserver == "y" and kernel_choice != "linux-yocto_3.14" and kernel_choice != "linux-yocto_3.10" and kernel_choice != "custom": xserver_choice = "xserver_i915" }}
+{{ if xserver == "y" and kernel_choice != "linux-yocto_3.17" and kernel_choice != "linux-yocto_3.14" and kernel_choice != "linux-yocto_3.10" and kernel_choice != "custom": xserver_choice = "xserver_i915" }}
 
 {{ if xserver == "y": }}
 XSERVER ?= "${XSERVER_X86_BASE} \

@@ -55,12 +59,18 @@ XSERVER ?= "${XSERVER_X86_BASE} \
            ${XSERVER_X86_I915} \
 {{ if xserver == "y" and xserver_choice == "xserver_i965": }}
            ${XSERVER_X86_I965} \
+{{ if xserver == "y" and xserver_choice == "xserver_fbdev": }}
+           ${XSERVER_X86_FBDEV} \
+{{ if xserver == "y" and xserver_choice == "xserver_modesetting": }}
+           ${XSERVER_X86_MODESETTING} \
 {{ if xserver == "y": }}
            "
 
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware v86d"
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware v86d eee-acpi-scripts"
 
 EXTRA_OECONF_append_pn-matchbox-panel-2 = " --with-battery=acpi"
 
+GLIBC_ADDONS = "nptl"
+
 {{ if xserver == "y" and xserver_choice == "xserver_vesa": }}
 APPEND += "video=vesafb vga=0x318"

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..6144e3a
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"

new file mode 100644
index 0000000..e545efa
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

new file mode 100644
index 0000000..b2ebef4
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..6144e3a
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"

new file mode 100644
index 0000000..e29ce30
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

new file mode 100644
index 0000000..4fed004
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

index 78fb5db..2a4acad 100644
@@ -16,6 +16,9 @@ TARGET_FPU = ""
 {{ input type:"choice" val:"tune_ppce500v2" msg:"ppce500v2 tuning optimizations" }}
 {{ input type:"choice" val:"tune_ppce5500" msg:"ppce5500 tuning optimizations" }}
 {{ input type:"choice" val:"tune_ppce6500" msg:"ppce6500 tuning optimizations" }}
+{{ input type:"choice" val:"tune_power5" msg:"power5 tuning optimizations" }}
+{{ input type:"choice" val:"tune_power6" msg:"power6 tuning optimizations" }}
+{{ input type:"choice" val:"tune_power7" msg:"power7 tuning optimizations" }}
 {{ if tunefile == "tune_ppc476": }}
 include conf/machine/include/tune-ppc476.inc
 {{ if tunefile == "tune_ppc603e": }}

@@ -36,6 +39,12 @@ include conf/machine/include/tune-ppce500v2.inc
 include conf/machine/include/tune-ppce5500.inc
 {{ if tunefile == "tune_ppce6500": }}
 include conf/machine/include/tune-ppce6500.inc
+{{ if tunefile == "tune_power5": }}
+include conf/machine/include/tune-power5.inc
+{{ if tunefile == "tune_power6": }}
+include conf/machine/include/tune-power6.inc
+{{ if tunefile == "tune_power7": }}
+include conf/machine/include/tune-power7.inc
 
 KERNEL_IMAGETYPE = "uImage"
 

@@ -72,3 +81,6 @@ UBOOT_ENTRYPOINT = "{{=uboot_entrypoint}}"
 KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/{{=kernel_devicetree}}"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+JFFS2_ERASEBLOCK = "0x4000"

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..c751b93
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"
\ No newline at end of file

new file mode 100644
index 0000000..e545efa
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

new file mode 100644
index 0000000..f36cbf8
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

index 7599ecb..4650fc4 100644
@@ -18,10 +18,10 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"powerpc" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/qemuppc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "n" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "x86_64": }}
 {{ input type:"choicelist" name:"new_kbranch" nameappend:"x86_64" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64"  prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}

55 lines not on this page · raw message

55 lines not on this page · raw message

index 392ace6..15e0f3a 100644
@@ -18,10 +18,10 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"powerpc" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/qemuppc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "n" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "x86_64": }}
 {{ input type:"choicelist" name:"new_kbranch" nameappend:"x86_64" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64"  prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}

index 2cc9b87..93513db 100644
@@ -18,10 +18,10 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"powerpc" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/qemuppc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "n" and qemuarch == "i386": }}
-{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc/base" }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc" }}
 
 {{ if need_new_kbranch == "y" and qemuarch == "x86_64": }}
 {{ input type:"choicelist" name:"new_kbranch" nameappend:"x86_64" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64"  prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}

55 lines not on this page · raw message

index 0780af9..230c2fc 100644
@@ -36,6 +36,8 @@ MACHINE_FEATURES += "wifi efi pcbios"
 {{ input type:"choice" val:"xserver_vesa" msg:"VESA xserver support" }}
 {{ input type:"choice" val:"xserver_i915" msg:"i915 xserver support" }}
 {{ input type:"choice" val:"xserver_i965" msg:"i965 xserver support" }}
+{{ input type:"choice" val:"xserver_fbdev" msg:"fbdev xserver support" }}
+{{ input type:"choice" val:"xserver_modesetting" msg:"modesetting xserver support" }}
 {{ if xserver == "y": }}
 XSERVER ?= "${XSERVER_X86_BASE} \
            ${XSERVER_X86_EXT} \

@@ -45,12 +47,18 @@ XSERVER ?= "${XSERVER_X86_BASE} \
            ${XSERVER_X86_I915} \
 {{ if xserver == "y" and xserver_choice == "xserver_i965": }}
            ${XSERVER_X86_I965} \
+{{ if xserver == "y" and xserver_choice == "xserver_fbdev": }}
+           ${XSERVER_X86_FBDEV} \
+{{ if xserver == "y" and xserver_choice == "xserver_modesetting": }}
+           ${XSERVER_X86_MODESETTING} \
 {{ if xserver == "y": }}
            "
 
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware v86d"
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware v86d eee-acpi-scripts"
 
 EXTRA_OECONF_append_pn-matchbox-panel-2 = " --with-battery=acpi"
 
+GLIBC_ADDONS = "nptl"
+
 {{ if xserver == "y" and xserver_choice == "xserver_vesa": }}
 APPEND += "video=vesafb vga=0x318"

index a04e6c7..8903a82 100644
@@ -1,5 +1,5 @@
 {{ if kernel_choice != "custom": }}
-{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.14) kernel? (y/n)" default:"y"}}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
 
 {{ if kernel_choice != "custom" and use_default_kernel == "n": }}
-{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.14"}}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..c751b93
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"
\ No newline at end of file

new file mode 100644
index 0000000..e545efa
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

new file mode 100644
index 0000000..6c60274
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"

index 7c436d6..4cce100 100644
@@ -230,6 +230,7 @@ DESCRIPTION
         powerpc
         i386
         mips
+        mips64
         x86_64
         qemu
 

new file mode 100644
index 0000000..e69de29

new file mode 100644
index 0000000..2b16efb
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: {{=machine}}
+
+#@DESCRIPTION: Machine configuration for {{=machine}} systems
+
+require conf/machine/include/tune-mips64.inc
+
+MACHINE_FEATURES = "pci ext2 ext3 serial"
+
+KERNEL_IMAGETYPE = "vmlinux"
+KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
+KERNEL_IMAGE_STRIP_EXTRA_SECTIONS  = ".comment"
+
+{{ if kernel_choice == "custom": preferred_kernel = "linux-yocto-custom" }}
+{{ if kernel_choice == "linux-yocto-dev": preferred_kernel = "linux-yocto-dev" }}
+{{ if kernel_choice == "custom" or kernel_choice == "linux-yocto-dev" : }}
+PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
+
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": preferred_kernel = kernel_choice.split('_')[0] }}
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": preferred_kernel_version = kernel_choice.split('_')[1] }}
+{{ if kernel_choice != "custom" and kernel_choice != "linux-yocto-dev": }}
+PREFERRED_PROVIDER_virtual/kernel ?= "{{=preferred_kernel}}"
+PREFERRED_VERSION_{{=preferred_kernel}} ?= "{{=preferred_kernel_version}}%"
+
+{{ input type:"boolean" name:"xserver" prio:"50" msg:"Do you need support for X? (y/n)" default:"y" }}
+{{ if xserver == "y": }}
+PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
+XSERVER ?= "xserver-xorg \
+            xf86-input-evdev \
+            xf86-video-fbdev"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+USE_VT ?= "0"
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+JFFS2_ERASEBLOCK = "0x10000"

new file mode 100644
index 0000000..8903a82
@@ -0,0 +1,5 @@
+{{ if kernel_choice != "custom": }}
+{{ input type:"boolean" name:"use_default_kernel" prio:"10" msg:"Would you like to use the default (3.17) kernel? (y/n)" default:"y"}}
+
+{{ if kernel_choice != "custom" and use_default_kernel == "n": }}
+{{ input type:"choicelist" name:"kernel_choice" gen:"bsp.kernel.kernels" prio:"10" msg:"Please choose the kernel to use in this BSP:" default:"linux-yocto_3.17"}}

new file mode 100644
index 0000000..b0fb63a
@@ -0,0 +1,9 @@
+define KMACHINE {{=machine}}
+define KTYPE preempt-rt
+define KARCH mips
+
+include {{=map_preempt_rt_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc

new file mode 100644
index 0000000..326663a
@@ -0,0 +1,9 @@
+define KMACHINE {{=machine}}
+define KTYPE standard
+define KARCH mips
+
+include {{=map_standard_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc

new file mode 100644
index 0000000..4514765
@@ -0,0 +1,9 @@
+define KMACHINE {{=machine}}
+define KTYPE tiny
+define KARCH mips
+
+include {{=map_tiny_kbranch(need_new_kbranch, new_kbranch, existing_kbranch)}}
+{{ if need_new_kbranch == "y": }}
+branch {{=machine}}
+
+include {{=machine}}.scc

new file mode 100644
index 0000000..e69de29

new file mode 100644
index 0000000..e69de29

new file mode 100644
index 0000000..e69de29

65 lines not on this page · raw message

new file mode 100644
index 0000000..1ef01b6
@@ -0,0 +1,7 @@
+kconf hardware {{=machine}}.cfg
+
+include cfg/usb-mass-storage.scc
+include cfg/fs/vfat.scc
+
+kconf hardware {{=machine}}-user-config.cfg
+include {{=machine}}-user-patches.scc

new file mode 100644
index 0000000..25c87a8
@@ -0,0 +1,25 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"i386" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Would you like SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "

new file mode 100644
index 0000000..08b1f88
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.10.9"

new file mode 100644
index 0000000..6144e3a
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-preempt-rt.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-rt_{{=machine}} ?= "f35992f80c81dc5fa1a97165dfd5cbb84661f7cb"
+#SRCREV_meta_pn-linux-yocto-rt_{{=machine}} ?= "1b534b2f8bbe9b8a773268cfa30a4850346f6f5f"
+#LINUX_VERSION = "3.14"

new file mode 100644
index 0000000..bc6968d
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.10.9"

new file mode 100644
index 0000000..85544e8
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.14"
\ No newline at end of file

new file mode 100644
index 0000000..e29ce30
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-tiny.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto-tiny_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto-tiny_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

new file mode 100644
index 0000000..1e814c5
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "19f7e43b54aef08d58135ed2a897d77b624b320a"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "459165c1dd61c4e843c36e6a1abeb30949a20ba7"
+#LINUX_VERSION = "3.10.9"
\ No newline at end of file

new file mode 100644
index 0000000..ca7f8c5
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.14"
\ No newline at end of file

new file mode 100644
index 0000000..4fed004
@@ -0,0 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+PR := "${PR}.1"
+
+COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
+
+{{ input type:"boolean" name:"need_new_kbranch" prio:"20" msg:"Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n]" default:"y" }}
+
+{{ if need_new_kbranch == "y": }}
+{{ input type:"choicelist" name:"new_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+{{ input type:"choicelist" name:"existing_kbranch" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n": }}
+KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
+
+{{ input type:"boolean" name:"smp" prio:"30" msg:"Do you need SMP support? (y/n)" default:"y"}}
+{{ if smp == "y": }}
+KERNEL_FEATURES_append_{{=machine}} += " cfg/smp.scc"
+
+SRC_URI += "file://{{=machine}}-standard.scc \
+            file://{{=machine}}-user-config.cfg \
+            file://{{=machine}}-user-patches.scc \
+            file://{{=machine}}-user-features.scc \
+           "
+
+# uncomment and replace these SRCREVs with the real commit ids once you've had
+# the appropriate changes committed to the upstream linux-yocto repo
+#SRCREV_machine_pn-linux-yocto_{{=machine}} ?= "840bb8c059418c4753415df56c9aff1c0d5354c8"
+#SRCREV_meta_pn-linux-yocto_{{=machine}} ?= "4fd76cc4f33e0afd8f906b1e8f231b6d13b6c993"
+#LINUX_VERSION = "3.17"
\ No newline at end of file

index d53b6f5..464ef08 100644
@@ -26,6 +26,7 @@ PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
 {{ input type:"choice" val:"arm" msg:"ARM     (32-bit)" }}
 {{ input type:"choice" val:"powerpc" msg:"PowerPC (32-bit)" }}
 {{ input type:"choice" val:"mips" msg:"MIPS    (32-bit)" }}
+{{ input type:"choice" val:"mips64" msg:"MIPS64  (64-bit)" }}
 {{ if qemuarch == "i386": }}
 require conf/machine/include/qemu.inc
 require conf/machine/include/tune-i586.inc

@@ -42,6 +43,9 @@ require conf/machine/include/tune-ppc7400.inc
 {{ if qemuarch == "mips": }}
 require conf/machine/include/qemu.inc
 require conf/machine/include/tune-mips32.inc
+{{ if qemuarch == "mips64": }}
+require conf/machine/include/qemu.inc
+require conf/machine/include/tune-mips64.inc
 
 {{ if qemuarch == "i386" or qemuarch == "x86_64": }}
 MACHINE_FEATURES += "x86"

@@ -62,7 +66,7 @@ SERIAL_CONSOLE = "115200 ttyAMA0"
 KERNEL_IMAGETYPE = "vmlinux"
 SERIAL_CONSOLE = "115200 ttyS0"
 
-{{ if qemuarch == "mips": }}
+{{ if qemuarch == "mips" or qemuarch == "mips64": }}
 KERNEL_IMAGETYPE = "vmlinux"
 KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
 SERIAL_CONSOLE = "115200 ttyS0"

index 1351980..3bdde79 100644
@@ -14,7 +14,7 @@ EndSection
 
 Section "InputDevice"
     Identifier    "Configured Mouse"
-{{ if qemuarch == "arm" or qemuarch == "powerpc" or qemuarch == "mips": }}
+{{ if qemuarch == "arm" or qemuarch == "powerpc" or qemuarch == "mips" or qemuarch == "mips64": }}
     Driver        "mouse"
 {{ if qemuarch == "i386" or qemuarch == "x86_64": }}
     Driver        "vmmouse"

@@ -36,7 +36,7 @@ EndSection
 
 Section "Device"
     Identifier    "Graphics Controller"
-{{ if qemuarch == "arm" or qemuarch == "powerpc" or qemuarch == "mips": }}
+{{ if qemuarch == "arm" or qemuarch == "powerpc" or qemuarch == "mips" or qemuarch == "mips64": }}
     Driver        "fbdev"
 {{ if qemuarch == "i386" or qemuarch == "x86_64": }}
     Driver        "vmware"

index 0e20023..3efea82 100644
@@ -10,6 +10,8 @@ include bsp/arm-versatile-926ejs/arm-versatile-926ejs-standard
 include bsp/qemu-ppc32/qemu-ppc32-standard
 {{ if qemuarch == "mips": }}
 include bsp/mti-malta32/mti-malta32-be-standard
+{{ if qemuarch == "mips64": }}
+include bsp/mti-malta64/mti-malta64-be-standard
 {{ if need_new_kbranch == "y": }}
 branch {{=machine}}
 

index 4650fc4..6fc5936 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta32" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta64" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index 73b6e34..8cae540 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index dd590bc..3df3e21 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/preempt-rt" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/preempt-rt/base" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index da4e61e..6403de7 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index 013883f..5c5b0c8 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index f2427d0..9dcd344 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard/tiny" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/tiny/base" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index 15e0f3a..a2bdb96 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta32" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta64" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index 93513db..7507503 100644
@@ -35,6 +35,12 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta32" }}
 
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta64" }}
+
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"
 

index 2d908cc..ea5eb2c 100644
@@ -29,11 +29,17 @@ COMPATIBLE_MACHINE_{{=machine}} = "{{=machine}}"
 {{ if need_new_kbranch == "n" and qemuarch == "x86_64": }}
 {{ input type:"choicelist" name:"existing_kbranch" nameappend:"x86_64" gen:"bsp.kernel.all_branches" branches_base:"standard:standard/common-pc-64"  prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/common-pc-64/base" }}
 
+{{ if need_new_kbranch == "n" and qemuarch == "mips": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta32" }}
+
+{{ if need_new_kbranch == "n" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta64" }}
+
 {{ if need_new_kbranch == "y" and qemuarch == "mips": }}
 {{ input type:"choicelist" name:"new_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
 
-{{ if need_new_kbranch == "n" and qemuarch == "mips": }}
-{{ input type:"choicelist" name:"existing_kbranch" nameappend:"mips" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/mti-malta32" }}
+{{ if need_new_kbranch == "y" and qemuarch == "mips64": }}
+{{ input type:"choicelist" name:"new_kbranch" nameappend:"mips64" gen:"bsp.kernel.all_branches" branches_base:"standard" prio:"20" msg:"Please choose a machine branch to base this BSP on:" default:"standard/base" }}
 
 {{ if need_new_kbranch == "n": }}
 KBRANCH_{{=machine}}  = "{{=existing_kbranch}}"