mb96a20s:use DVB core I2C binding and add media controller support
Subsystems (5)
PATCH 4/5 dvb core: add media controller support for the demod
In reply to a message not in the archiveNow that we have an I2C function to attach DVB sub-devices, add support for media controller on it.
drivers/media/dvb-core/dvb_frontend.h +7 -0
@@ -40,6 +40,8 @@#include <linux/dvb/frontend.h> +#include <media/media-device.h> +#include "dvbdev.h" /*
@@ -416,6 +418,11 @@ struct dvb_frontend {struct dvb_frontend_ops ops;struct dvb_adapter *dvb;struct i2c_client *fe_cl; +#if defined(CONFIG_MEDIA_CONTROLLER ) +struct media_device *mdev; +struct media_entity demod_entity; +#endif +void *demodulator_priv;void *tuner_priv;void *frontend_priv;
drivers/media/dvb-core/dvb_i2c.c +28 -2
@@ -39,11 +39,12 @@ dvb_i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info *info,struct dvb_frontend *dvb_i2c_attach_fe (struct i2c_adapter *adap,const struct i2c_board_info *info, -const void *cfg,void **out) +const void *cfg,void **out,struct media_device *mdev) {struct i2c_client *cl;struct i2c_board_info bi;struct dvb_i2c_dev_config dcfg; +struct dvb_frontend *fe; dcfg.priv_cfg = cfg; dcfg.out = out;
@@ -53,7 +54,28 @@ dvb_i2c_attach_fe(struct i2c_adapter *adap, const struct i2c_board_info *info, cl =dvb_i2c_new_device (adap, &bi,NULL );if (!cl)return NULL ; -return i2c_get_clientdata (cl); + fe =i2c_get_clientdata (cl); + +#if defined(CONFIG_MEDIA_CONTROLLER ) +/* Register the media controller entity. */ +if (mdev) { +int ret; + +if (!fe->mdev) + fe->mdev = mdev; + + fe->demod_entity.type =MEDIA_ENT_T_DEVNODE_DVB ; + fe->demod_entity.name = info->type; + fe->demod_entity.info.dvb = fe->id; + fe->demod_entity.flags =MEDIA_ENT_T_DVB_DEMOD ; + ret =media_device_register_entity (fe->mdev, &fe->demod_entity); +if (ret <0 ) +printk (KERN_WARNING +"%s: media_device_register_entity failed\n" , + __func__); + } +#endif +return fe; }EXPORT_SYMBOL (dvb_i2c_attach_fe);
@@ -193,6 +215,10 @@ static int remove_fe(struct i2c_client *client,if (param->priv_remove) param->priv_remove (client); fe =i2c_get_clientdata (client); + +if (fe->mdev) +media_device_unregister_entity (&fe->demod_entity); +kfree (fe->demodulator_priv);kfree (fe);module_put (this_module);
drivers/media/dvb-core/dvb_i2c.h +2 -1
@@ -33,7 +33,8 @@struct dvb_frontend *dvb_i2c_attach_fe (struct i2c_adapter *adap,const struct i2c_board_info *info, -const void *cfg,void **out); +const void *cfg,void **out, +struct media_device *mdev); struct i2c_client *dvb_i2c_attach_tuner(struct i2c_adapter *adap, const struct i2c_board_info *info,
drivers/media/pci/cx23885/cx23885-dvb.c +1 -1
@@ -1510,7 +1510,7 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend =dvb_i2c_attach_fe (&i2c_bus->i2c_adap, &mb86a20s_board_info, &mygica_x8507_mb86a20s_config, -NULL ); +NULL ,NULL );if (fe0->dvb.frontend ==NULL )break ;
drivers/media/pci/saa7134/saa7134-dvb.c +1 -1
@@ -1814,7 +1814,7 @@ static int dvb_init(struct saa7134_dev *dev) fe0->dvb.frontend =dvb_i2c_attach_fe (&dev->i2c_adap, &mb86a20s_board_info, &kworld_mb86a20s_config, -NULL ); +NULL ,NULL );if (fe0->dvb.frontend !=NULL ) { dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b,
drivers/media/usb/cx231xx/cx231xx-dvb.c +1 -1
@@ -822,7 +822,7 @@ static int dvb_init(struct cx231xx *dev) dev->dvb->frontend =dvb_i2c_attach_fe (demod_i2c, &mb86a20s_board_info, &pv_mb86a20s_config, -NULL ); +NULL ,NULL );if (dev->dvb->frontend ==NULL ) {dev_err (dev->dev,"Failed to attach mb86a20s demod\n" );
drivers/media/usb/em28xx/em28xx-dvb.c +1 -1
@@ -1330,7 +1330,7 @@ static int em28xx_dvb_init(struct em28xx *dev) dvb->fe[0 ] =dvb_i2c_attach_fe (&dev->i2c_adap[dev->def_i2c_bus], &mb86a20s_board_info, &c3tech_duo_mb86a20s_config, -NULL ); +NULL ,NULL );if (dvb->fe[0 ] !=NULL ) dvb_attach(tda18271_attach, dvb->fe[0], 0x60, &dev->i2c_adap[dev->def_i2c_bus],
include/uapi/linux/media.h +3 -1
@@ -27,7 +27,7 @@#include <linux/types.h> #include <linux/version.h> -#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) +#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 1)struct media_device_info {char driver[16 ];
@@ -59,6 +59,8 @@ struct media_device_info {/* A converter of analogue video to its digital representation. */ #define MEDIA_ENT_T_V4L2_SUBDEV_DECODER (MEDIA_ENT_T_V4L2_SUBDEV + 4) +#define MEDIA_ENT_T_DVB_DEMOD (MEDIA_ENT_T_V4L2_SUBDEV + 5) +#define MEDIA_ENT_FL_DEFAULT (1 << 0)struct media_entity_desc {
Signature · 1 line
2.1.0
cover mb96a20s:use DVB core I2C binding and add media controller support
Those patches are currently experimental and they depend on this patch:
https://patchwork.linuxtv.org/patch/27329/
There are 2 cleanup patches here for mb86a20s, and one patch that converts it to use the new I2C binding helper routines added at the DVB core.
The next patch extends the DVB core I2C binding routines to add media controller support for the DVB demod.
The final patch makes cx231xx to register to the media controller, if the device has a mb86a20s.
Please notice that the current media controller support is actually too poor and not complete, as it doesn't create and pads to the demod entity. More work is needed, in order to add the demod pads to it.
That would require some changes at the dvb core, for it to be media controller aware, and to create the nodes for the DVR and for the other elements of the DVB graph.
For now, all it shows is:
Media controller API version 0.1.1
Media device information
------------------------
driver cx231xx model Pixelview PlayTV USB Hybrid serial CIR000000000001 bus info 1.2 hw revision 0x4001 driver version 3.19.0
Device topology
- entity 1: mb86a20s (0 pad, 0 link)
type Node subtype DVB flags 20005
Mauro Carvalho Chehab (5):
mb86a20s: remove unused debug modprobe parameter
mb86a20s: convert it to I2C binding model
mb86a20s: remove two uneeded macros
dvb core: add media controller support for the demod
cx231xx: add media controller support for mb86a20s boards
drivers/media/dvb-core/dvb_frontend.h | 7 +++ drivers/media/dvb-core/dvb_i2c.c | 30 ++++++++++- drivers/media/dvb-core/dvb_i2c.h | 3 +- drivers/media/dvb-frontends/mb86a20s.c | 90 +++++++++++++++------------------ drivers/media/dvb-frontends/mb86a20s.h | 19 ------- drivers/media/pci/cx23885/cx23885-dvb.c | 13 +++-- drivers/media/pci/saa7134/saa7134-dvb.c | 13 +++-- drivers/media/usb/cx231xx/cx231xx-dvb.c | 64 ++++++++++++++++++++--- drivers/media/usb/em28xx/em28xx-dvb.c | 13 +++-- include/uapi/linux/media.h | 4 +- 10 files changed, 165 insertions(+), 91 deletions(-)
Signature · 1 line
2.1.0
PATCH 1/5 mb86a20s: remove unused debug modprobe parameter
The debug parameter is not used anymore, as this module was converted already to use dev_dbg().
drivers/media/dvb-frontends/mb86a20s.c +0 -4
@@ -22,10 +22,6 @@#define NUM_LAYERS 3 -static int debug =1 ; -module_param (debug, int,0644 ); -MODULE_PARM_DESC (debug,"Activates frontend debugging (default:0)" ); -enum mb86a20s_bandwidth {MB86A20S_13SEG =0 ,MB86A20S_13SEG_PARTIAL =1 ,
Signature · 1 line
2.1.0
PATCH 2/5 mb86a20s: convert it to I2C binding model
In reply to Mauro Carvalho ChehabInstead of using I2C raw API, use the standard I2C binding API, with the DVB core support for it.
drivers/media/dvb-frontends/mb86a20s.c +34 -34
@@ -18,6 +18,7 @@#include <asm/div64.h> #include "dvb_frontend.h" +#include "dvb_i2c.h" #include "mb86a20s.h" #define NUM_LAYERS 3
@@ -35,12 +36,10 @@ static u8 mb86a20s_subchannel[] = { };struct mb86a20s_state { -struct i2c_adapter *i2c; +struct i2c_client *i2c;const struct mb86a20s_config *config;u32 last_frequency; -struct dvb_frontend frontend; -u32 if_freq;enum mb86a20s_bandwidth bw;bool inversion;
@@ -234,7 +233,7 @@ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, };int rc; - rc =i2c_transfer (state->i2c, &msg,1 ); + rc =i2c_transfer (state->i2c->adapter, &msg,1 );if (rc !=1 ) { dev_err(&state->i2c->dev, "%s: writereg error (rc == %i, reg == 0x%02x, data == 0x%02x)\n",
@@ -269,7 +268,7 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } }; - rc =i2c_transfer (state->i2c, msg,2 ); + rc =i2c_transfer (state->i2c->adapter, msg,2 );if (rc !=2 ) { dev_err(&state->i2c->dev, "%s: reg=0x%x (error=%d)\n",
@@ -281,11 +280,11 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, }#define mb86a20s_readreg (state, reg) \ - mb86a20s_i2c_readreg(state, state->config->demod_address, reg) + mb86a20s_i2c_readreg(state, state->i2c->addr, reg)#define mb86a20s_writereg (state, reg, val) \ - mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val) + mb86a20s_i2c_writereg(state, state->i2c->addr, reg, val)#define mb86a20s_writeregdata (state, regdata) \ - mb86a20s_i2c_writeregdata(state, state->config->demod_address, \ + mb86a20s_i2c_writeregdata(state, state->i2c->addr, \ regdata, ARRAY_SIZE(regdata))/*
@@ -2058,41 +2057,34 @@ static int mb86a20s_tune(struct dvb_frontend *fe,return rc; } -static void mb86a20s_release (struct dvb_frontend *fe) +static int mb86a20s_remove (struct i2c_client *i2c) { -struct mb86a20s_state *state = fe->demodulator_priv; +dev_dbg (&i2c->dev,"%s called.\n" , __func__); -dev_dbg (&state->i2c->dev,"%s called.\n" , __func__); - -kfree (state); +return 0 ; }static struct dvb_frontend_ops mb86a20s_ops; -struct dvb_frontend *mb86a20s_attach (const struct mb86a20s_config *config, -struct i2c_adapter *i2c) +static int mb86a20s_probe (struct i2c_client *i2c, +const struct i2c_device_id *id) { +struct dvb_frontend *fe;struct mb86a20s_state *state;u8 rev;dev_dbg (&i2c->dev,"%s called.\n" , __func__); -/* allocate memory for the internal state */ - state =kzalloc (sizeof (struct mb86a20s_state ),GFP_KERNEL ); -if (state ==NULL ) { -dev_err (&i2c->dev, -"%s: unable to allocate memory for state\n" , __func__); - goto error; - } + fe =i2c_get_clientdata (i2c); + state = fe->demodulator_priv;/* setup the state */ - state->config = config; +memcpy (&state->config, i2c->dev.platform_data,sizeof (state->config)); state->i2c = i2c;/* create dvb_frontend */ -memcpy (&state->frontend.ops, &mb86a20s_ops, +memcpy (&fe->ops, &mb86a20s_ops,sizeof (struct dvb_frontend_ops )); - state->frontend.demodulator_priv = state;/* Check if it is a mb86a20s frontend */ rev =mb86a20s_readreg (state,0 );
@@ -2104,16 +2096,11 @@ struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,dev_dbg (&i2c->dev,"Frontend revision %d is unknown - aborting.\n" , rev); - goto error; +return -ENODEV ; } -return &state->frontend; - -error: -kfree (state); -return NULL ; +return 0 ; } -EXPORT_SYMBOL (mb86a20s_attach);static struct dvb_frontend_ops mb86a20s_ops = { .delsys = {SYS_ISDBT },
@@ -2132,8 +2119,6 @@ static struct dvb_frontend_ops mb86a20s_ops = { .frequency_stepsize = 62500, }, - .release = mb86a20s_release, - .init = mb86a20s_initfe, .set_frontend = mb86a20s_set_frontend, .get_frontend = mb86a20s_get_frontend_dummy,
@@ -2142,6 +2127,21 @@ static struct dvb_frontend_ops mb86a20s_ops = { .tune = mb86a20s_tune, }; +static const struct i2c_device_id mb86a20s_id[] = { + {"mb86a20s" ,0 }, + {} +}; + +static const struct dvb_i2c_module_param mb86a20s_param = { + .ops.fe_ops =NULL , + .priv_probe = mb86a20s_probe, + .priv_remove = mb86a20s_remove, + .priv_size =sizeof (struct mb86a20s_state ), + .is_tuner = false, +}; + +DEFINE_DVB_I2C_MODULE (mb86a20s, mb86a20s_id, mb86a20s_param); +MODULE_DESCRIPTION ("DVB Frontend module for Fujitsu mb86A20s hardware" );MODULE_AUTHOR ("Mauro Carvalho Chehab" );MODULE_LICENSE ("GPL" );
drivers/media/dvb-frontends/mb86a20s.h +0 -19
@@ -34,23 +34,4 @@ struct mb86a20s_config { bool is_serial; }; -#if IS_ENABLED (CONFIG_DVB_MB86A20S ) -extern struct dvb_frontend *mb86a20s_attach (const struct mb86a20s_config *config, -struct i2c_adapter *i2c); -extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter (struct dvb_frontend *); -#else -static inline struct dvb_frontend *mb86a20s_attach ( -const struct mb86a20s_config *config,struct i2c_adapter *i2c) -{ -printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __func__); -return NULL ; -} -static struct i2c_adapter * -mb86a20s_get_tuner_i2c_adapter (struct dvb_frontend *fe) -{ -printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __func__); -return NULL ; -} -#endif -#endif /* MB86A20S */
drivers/media/pci/cx23885/cx23885-dvb.c +9 -4
@@ -26,6 +26,7 @@#include "cx23885.h" #include <media/v4l2-common.h> +#include "dvb_i2c.h" #include "dvb_ca_en50221.h" #include "s5h1409.h" #include "s5h1411.h"
@@ -542,7 +543,10 @@ static struct xc5000_config mygica_x8506_xc5000_config = { };static struct mb86a20s_config mygica_x8507_mb86a20s_config = { - .demod_address =0x10 , +}; + +static const struct i2c_board_info mb86a20s_board_info = { +I2C_BOARD_INFO ("mb86a20s" ,0x10 ) };static struct xc5000_config mygica_x8507_xc5000_config = {
@@ -1503,9 +1507,10 @@ static int dvb_register(struct cx23885_tsport *port)case CX23885_BOARD_MYGICA_X8507 : i2c_bus = &dev->i2c_bus[0 ]; i2c_bus2 = &dev->i2c_bus[1 ]; - fe0->dvb.frontend =dvb_attach (mb86a20s_attach, - &mygica_x8507_mb86a20s_config, - &i2c_bus->i2c_adap); + fe0->dvb.frontend =dvb_i2c_attach_fe (&i2c_bus->i2c_adap, + &mb86a20s_board_info, + &mygica_x8507_mb86a20s_config, +NULL );if (fe0->dvb.frontend ==NULL )break ;
drivers/media/pci/saa7134/saa7134-dvb.c +9 -4
@@ -34,6 +34,7 @@#include "dvb-pll.h" #include <dvb_frontend.h> +#include "dvb_i2c.h" #include "mt352.h" #include "mt352_priv.h" /* FIXME */ #include "tda1004x.h"
@@ -245,7 +246,10 @@ static struct tda18271_config kworld_tda18271_config = { };static const struct mb86a20s_config kworld_mb86a20s_config = { - .demod_address =0x10 , +}; + +static const struct i2c_board_info mb86a20s_board_info = { +I2C_BOARD_INFO ("mb86a20s" ,0x10 ) };static int kworld_sbtvd_gate_ctrl (struct dvb_frontend * fe,int enable)
@@ -1807,9 +1811,10 @@ static int dvb_init(struct saa7134_dev *dev)/* Switch to digital mode */ saa7134_tuner_callback (dev,0 ,TDA18271_CALLBACK_CMD_AGC_ENABLE ,1 ); - fe0->dvb.frontend =dvb_attach (mb86a20s_attach, - &kworld_mb86a20s_config, - &dev->i2c_adap); + fe0->dvb.frontend =dvb_i2c_attach_fe (&dev->i2c_adap, + &mb86a20s_board_info, + &kworld_mb86a20s_config, +NULL );if (fe0->dvb.frontend !=NULL ) { dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b,
drivers/media/usb/cx231xx/cx231xx-dvb.c +9 -5
@@ -26,6 +26,7 @@#include <media/v4l2-common.h> #include <media/videobuf-vmalloc.h> +#include "dvb_i2c.h" #include "xc5000.h" #include "s5h1432.h" #include "tda18271.h"
@@ -138,10 +139,13 @@ static struct tda18271_config hcw_tda18271_config = { };static const struct mb86a20s_config pv_mb86a20s_config = { - .demod_address =0x10 , .is_serial = true, }; +static const struct i2c_board_info mb86a20s_board_info = { +I2C_BOARD_INFO ("mb86a20s" ,0x10 ) +}; +static struct tda18271_config pv_tda18271_config = { .std_map = &mb86a20s_tda18271_config, .gate =TDA18271_GATE_DIGITAL ,
@@ -815,10 +819,10 @@ static int dvb_init(struct cx231xx *dev)"%s: looking for demod on i2c bus: %d\n" , __func__, i2c_adapter_id(tuner_i2c)); - dev->dvb->frontend =dvb_attach (mb86a20s_attach, - &pv_mb86a20s_config, - demod_i2c); - + dev->dvb->frontend =dvb_i2c_attach_fe (demod_i2c, + &mb86a20s_board_info, + &pv_mb86a20s_config, +NULL );if (dev->dvb->frontend ==NULL ) {dev_err (dev->dev,"Failed to attach mb86a20s demod\n" );
drivers/media/usb/em28xx/em28xx-dvb.c +9 -4
@@ -34,6 +34,7 @@#include "tuner-simple.h" #include <linux/gpio.h> +#include "dvb_i2c.h" #include "lgdt330x.h" #include "lgdt3305.h" #include "zl10353.h"
@@ -833,10 +834,13 @@ static struct qt1010_config em28xx_qt1010_config = { };static const struct mb86a20s_config c3tech_duo_mb86a20s_config = { - .demod_address =0x10 , .is_serial = true, }; +static const struct i2c_board_info mb86a20s_board_info = { +I2C_BOARD_INFO ("mb86a20s" ,0x10 ) +}; +static struct tda18271_std_map mb86a20s_tda18271_config = { .dvbt_6 = { .if_freq =4000 , .agc_mode =3 , .std =4 , .if_lvl =1 , .rfagc_top =0x37 , },
@@ -1323,9 +1327,10 @@ static int em28xx_dvb_init(struct em28xx *dev)break ;case EM2884_BOARD_C3TECH_DIGITAL_DUO : - dvb->fe[0 ] =dvb_attach (mb86a20s_attach, - &c3tech_duo_mb86a20s_config, - &dev->i2c_adap[dev->def_i2c_bus]); + dvb->fe[0 ] =dvb_i2c_attach_fe (&dev->i2c_adap[dev->def_i2c_bus], + &mb86a20s_board_info, + &c3tech_duo_mb86a20s_config, +NULL );if (dvb->fe[0 ] !=NULL ) dvb_attach(tda18271_attach, dvb->fe[0], 0x60, &dev->i2c_adap[dev->def_i2c_bus],
Signature · 1 line
2.1.0
PATCH 3/5 mb86a20s: remove two uneeded macros
In reply to Mauro Carvalho ChehabThere are two macros that are there just to simplify the parameter passage. Remove them, as the i2c address is already inside the i2c client structure.
drivers/media/dvb-frontends/mb86a20s.c +9 -15
@@ -224,12 +224,12 @@ static struct regdata mb86a20s_per_ber_reset[] = {* I2C read/write functions and macros */ -static int mb86a20s_i2c_writereg (struct mb86a20s_state *state, -u8 i2c_addr,u8 reg,u8 data) +static int mb86a20s_writereg (struct mb86a20s_state *state, +u8 reg,u8 data) {u8 buf[] = { reg, data };struct i2c_msg msg = { - .addr = i2c_addr, .flags =0 , .buf = buf, .len =2 + .addr = state->i2c->addr, .flags =0 , .buf = buf, .len =2 };int rc;
@@ -245,27 +245,25 @@ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, }static int mb86a20s_i2c_writeregdata (struct mb86a20s_state *state, -u8 i2c_addr,struct regdata *rd,int size) +struct regdata *rd,int size) {int i, rc;for (i =0 ; i < size; i++) { - rc =mb86a20s_i2c_writereg (state, i2c_addr, rd[i].reg, - rd[i].data); + rc =mb86a20s_writereg (state, rd[i].reg, rd[i].data);if (rc <0 )return rc; }return 0 ; } -static int mb86a20s_i2c_readreg (struct mb86a20s_state *state, -u8 i2c_addr,u8 reg) +static int mb86a20s_readreg (struct mb86a20s_state *state,u8 reg) {u8 val;int rc;struct i2c_msg msg[] = { - { .addr = i2c_addr, .flags =0 , .buf = ®, .len =1 }, - { .addr = i2c_addr, .flags =I2C_M_RD , .buf = &val, .len =1 } + { .addr = state->i2c->addr, .flags =0 , .buf = ®, .len =1 }, + { .addr = state->i2c->addr, .flags =I2C_M_RD , .buf = &val, .len =1 } }; rc =i2c_transfer (state->i2c->adapter, msg,2 );
@@ -279,12 +277,8 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,return val; } -#define mb86a20s_readreg (state, reg) \ - mb86a20s_i2c_readreg(state, state->i2c->addr, reg) -#define mb86a20s_writereg (state, reg, val) \ - mb86a20s_i2c_writereg(state, state->i2c->addr, reg, val)#define mb86a20s_writeregdata (state, regdata) \ - mb86a20s_i2c_writeregdata(state, state->i2c->addr, \ + mb86a20s_i2c_writeregdata(state, \ regdata, ARRAY_SIZE(regdata))/*
Signature · 1 line
2.1.0
PATCH 5/5 cx231xx: add media controller support for mb86a20s boards
In reply to Mauro Carvalho ChehabAdd experimental support for the media controlers, on boards that have mb86a20s (and use the new dvb core I2C binding).
drivers/media/usb/cx231xx/cx231xx-dvb.c +51 -3
@@ -65,6 +65,10 @@ struct cx231xx_dvb {struct dmx_frontend fe_mem;struct dvb_net net;struct i2c_client *i2c_client_tuner; + +#if defined(CONFIG_MEDIA_CONTROLLER ) +struct media_device *media_dev; +#endif };static struct s5h1432_config dvico_s5h1432_config = {
@@ -562,6 +566,7 @@ fail_adapter:static void unregister_dvb (struct cx231xx_dvb *dvb) {struct i2c_client *client; +dvb_net_release (&dvb->net); dvb->demux.dmx.remove_frontend (&dvb->demux.dmx, &dvb->fe_mem); dvb->demux.dmx.remove_frontend (&dvb->demux.dmx, &dvb->fe_hw);
@@ -573,6 +578,13 @@ static void unregister_dvb(struct cx231xx_dvb *dvb)module_put (client->dev.driver->owner);i2c_unregister_device (client); } +#ifdef CONFIG_MEDIA_CONTROLLER +if (dvb->media_dev) { +media_device_unregister (dvb->media_dev); +kfree (dvb->media_dev); + dvb->media_dev =NULL ; + } +#endif dvb_unregister_frontend (dvb->frontend);dvb_frontend_detach (dvb->frontend);dvb_unregister_adapter (&dvb->adapter);
@@ -813,16 +825,45 @@ static int dvb_init(struct cx231xx *dev) }case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID : -case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID : +case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID : { +#ifdef CONFIG_MEDIA_CONTROLLER +struct media_device *mdev; +#endif dev_info (dev->dev,"%s: looking for demod on i2c bus: %d\n" , __func__,i2c_adapter_id (tuner_i2c)); +#ifdef CONFIG_MEDIA_CONTROLLER + mdev =kzalloc (sizeof (*mdev),GFP_KERNEL ); +if (mdev) { + mdev->dev = dev->dev; +strlcpy (mdev->model, dev->board.name, +sizeof (mdev->model)); +if (dev->udev->serial) +strlcpy (mdev->serial, dev->udev->serial, +sizeof (mdev->serial)); +strcpy (mdev->bus_info, dev->udev->devpath); + mdev->hw_revision =le16_to_cpu (dev->udev->descriptor.bcdDevice); + mdev->driver_version =LINUX_VERSION_CODE ; + + result =media_device_register (mdev); +if (result) { +dev_err (dev->dev, +"Couln't create a media device. Error: %d\n" , + result); +kfree (mdev); + mdev =NULL ; + }else { + dvb->media_dev = mdev; + } + } +#endif + dev->dvb->frontend =dvb_i2c_attach_fe (demod_i2c, &mb86a20s_board_info, &pv_mb86a20s_config, -NULL ,NULL ); +NULL , mdev);if (dev->dvb->frontend ==NULL ) {dev_err (dev->dev,"Failed to attach mb86a20s demod\n" );
@@ -837,7 +878,7 @@ static int dvb_init(struct cx231xx *dev)0x60 , tuner_i2c, &pv_tda18271_config);break ; - + }default : dev_err(dev->dev, "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
@@ -866,6 +907,13 @@ ret:return result; out_free: +#ifdef CONFIG_MEDIA_CONTROLLER +if (dvb->media_dev) { +media_device_unregister (dvb->media_dev); +kfree (dvb->media_dev); + dvb->media_dev =NULL ; + } +#endif kfree (dvb); dev->dvb =NULL ; goto ret;
Signature · 1 line
2.1.0
Re: [PATCH 4/5] dvb core: add media controller support for the demod
In reply to Mauro Carvalho Chehabdrivers/media/dvb-core/dvb_frontend.h struct dvb_frontend { · line 425
Quoted 10 lines · Mauro Carvalho Chehab
/*
drivers/media/dvb-core/dvb_frontend.h +5
-0@@ -416,6 +418,11 @@ struct dvb_frontend {struct dvb_frontend_ops ops;struct dvb_adapter *dvb;struct i2c_client *fe_cl; +#if defined(CONFIG_MEDIA_CONTROLLER ) +struct media_device *mdev; +struct media_entity demod_entity; +#endif +
I understood that this patch was invalidated by the updated patch series:
"dvb core: add basic suuport for the media controller",
and now the demod_entity is registered in dvbdev.c::dvb_register_device() via dvb_frontend_register(). Is that right?
And if so,
Shouldn't only the (tuner) subdevices be registered separately in dvb_i2c_attach_tuner(), instead of dvb_i2c_attach_fe()? (and it would be simpler if "mdev" can be accessed
like dvb_fe_get_mdev() {return fepriv->dvbdev->mdev;}, instead of having a cached value in dvb_frontend.)
sorry if I'm totally wrong,
I don't have an experience with media controller API.
regards,
akihiro
Re: [PATCH 4/5] dvb core: add media controller support for the demod
Em Mon, 05 Jan 2015 23:36:00 +0900
Akihiro TSUKADA <[email protected]> escreveu:
Quoted 8 lines · Mauro Carvalho Chehab
Quoted 7 lines
/*
drivers/media/dvb-core/dvb_frontend.h +2
-0@@ -416,6 +418,11 @@ struct dvb_frontend {struct dvb_frontend_ops ops;struct dvb_adapter *dvb;struct i2c_client *fe_cl; +#if defined(CONFIG_MEDIA_CONTROLLER ) +struct media_device *mdev;
Quoted 8 lines
drivers/media/dvb-core/dvb_frontend.h struct dvb_frontend { · line 425
Quoted 3 lines
drivers/media/dvb-core/dvb_frontend.h +3
-0+struct media_entity demod_entity; +#endif +I understood that this patch was invalidated by the updated patch series:
"dvb core: add basic suuport for the media controller",
and now thedemod_entityis registered indvbdev.c::dvb_register_device()viadvb_frontend_register(). Is that right?
Yes.
Quoted 3 lines
And if so,
Shouldn't only the (tuner) subdevices be registered separately indvb_i2c_attach_tuner(), instead ofdvb_i2c_attach_fe()?
No, it seems better to let dmxdev to register. That means that even the non-converted I2C drivers, plus the non-I2C drivers may benefit from the Media controller as well.
Quoted 3 lines
(and it would be simpler if "mdev" can be accessed like
dvb_fe_get_mdev(){returnfepriv->dvbdev->mdev;}, instead of having a cached value indvb_frontend.)
Yeah, we could map this way, but that would require to add an extra parameter to the fe register function, with has already too much parameters. So, as it already uses an struct to pass parameters into it, I decided to just re-use it.
Quoted 9 lines
sorry if I'm totally wrong,
I don't have an experience with media controller API.regards,
akihiro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Cheers, Mauro
Re: [PATCH 4/5] dvb core: add media controller support for the demod
Quoted 9 lines · Mauro Carvalho Chehab
Em Mon, 05 Jan 2015 23:36:00 +0900
Quoted 3 lines
And if so,
Shouldn't only the (tuner) subdevices be registered separately indvb_i2c_attach_tuner(), instead ofdvb_i2c_attach_fe()?No, it seems better to let dmxdev to register. That means that even the non-converted I2C drivers, plus the non-I2C drivers may benefit from the Media controller as well.
I guess you meant dvbdev instead of dmxdev,
but still I'm afraid that media_entity for a tuner module is not registered like FE(demod),dmxdev,net,ca, because dvb_frontend_register() registers just a demod (or a whole FE module) for now.
Tuner subdevices don't have their own device nodes to be passed to dvb_register_media_device() in the first place,
So I think we need to define MEDIA_ENT_T_DVB_SUBDEV{,_TUNER} and register a media_entity of type:MEDIA_ENT_T_DVB_SUBDEV_TUNER, if a separate tuner chip is used.
(with {major,minor} of the parent FE dev?)
If we can distinguish if a separate tuner subdev is used or not by looking into "fe", then we might be able to register the subdev from within dvb_register_[media_]device(). But if we cannot know from "fe", dvb_i2c_attach_tuner() looks to be a good place.
Further, when a DTV board has multiple tuners and/or multiple demods and the link between them can be dynamically configurable, (via media controller API or a new DVB ioctl?),
then a tuner subdev can be unused and connected to no demod, so we cannot identify all tuner subdevs from the demod ("fe") anyway.
Quoted 4 lines
Yeah, we could map this way, but that would require to add an extra parameter to the fe register function, with has already too much parameters. So, as it already uses an struct to pass parameters into it, I decided to just re-use it.
if we add dvb_adapter.mdev and a user sets the pointer, then we can retrieve mdev in all the registering functions (dvb_register_frontend, dvb_{dmxdev,net,ca_en50221}_init), as all of them take a dvb_adapter parameter.
or is it possible that the FE,demux,net,ca under one DVB adapter belong to different mdev's and each of them must keep its parent mdev separately?
regards,
akihiro