layer.conf: set high layer priority
PATCH 1/1 layer.conf: set high layer priority
In reply to Petter MabäckerSet a high layer prio to ensure that meta-raspberrypi addons are always prioritized above the depended layers.
--- conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
conf/layer.conf +1 -1
@@ -7,7 +7,7 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb \ BBFILE_COLLECTIONS += "raspberrypi" BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/" -BBFILE_PRIORITY_raspberrypi = "6" +BBFILE_PRIORITY_raspberrypi = "9" # Additional license directories. LICENSE_PATH += "${LAYERDIR}/files/custom-licenses"
Signature · 1 line
1.9.1
cover layer.conf: set high layer priority
The following changes since commit d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:
README: Github repo changed (2015-02-14 02:00:57 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib petmab/rpi_layer_prio
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
Petter Mabäcker (1):
layer.conf: set high layer priority
conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Signature · 1 line
1.9.1
Hello,
Quoted 6 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)
are available in the git repository at:
Quoted 8 lines
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prio
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prioPetter Mabäcker (1):
layer.conf: set high layer priorityconf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Patch merged to master. Thanks Petter.
--
Andrei Gherzan
Quoted 15 lines · Andrei Gherzan
Hello,
Quoted 12 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prio
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prioPetter Mabäcker (1):
layer.conf: set high layer priority
Quoted 8 lines
Quoted 2 lines
conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.
Andreas
Hi Andreas,
On Mon, Mar 9, 2015 at 9:50 PM, Andreas Müller <[email protected]
Quoted 29 lines
wrote:
Quoted 4 lines · Andrei Gherzan
Hello,
Quoted 1 line · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:Quoted 7 lines
Quoted 7 lines
README: Github repo changed (2015-02-14 02:00:57 +0100)
are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_priohttp://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
Quoted 4 lines
Quoted 4 lines
Petter Mabäcker (1):
layer.conf: set high layer priorityQuoted 8 lines
Quoted 2 lines
conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--
Quoted 8 lines
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.Andreas
There is an issue with that conf file. This was introduced by the rpi2 support patches. Could you please fill in a redmine issue? Or maybe shoot us a patch? J
Thanks!
Signature · 1 line
*Andrei Gherzan*
Quoted 25 lines · Andreas Müller
Quoted 15 lines · Andrei Gherzan
Hello,
Quoted 12 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prio
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prioPetter Mabäcker (1):
layer.conf: set high layer priorityQuoted 8 lines
Quoted 2 lines
conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--
Quoted 5 lines
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.
Are you trying to build for the RaspberryPi2?
I [temporarily] fixed this by copying the missing files. In
the meta-raspberrypi layer, do
% rsync -a recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi{/,2}
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 40 lines · Gary Thomas
Quoted 32 lines · Andreas Müller
Quoted 23 lines · Andrei Gherzan
Hello,
Quoted 10 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prioQuoted 7 lines
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
Petter Mabäcker (1):
layer.conf: set high layer priorityconf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 5 lines
Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--Quoted 5 lines
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.
Quoted 6 lines
Are you trying to build for the RaspberryPi2?
I [temporarily] fixed this by copying the missing files. In the meta-raspberrypi layer, do
% rsync -a
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi{/,2}
ctoproject.org/listinfo/yocto
I checked both (I have simply copied xserver-xf86-config files for rpi2). Increasing Layer priority above 7 fails for me - have no idea why. What should this patch solve/enhance?
Andreas
Quoted 47 lines · Andreas Müller
Quoted 40 lines · Gary Thomas
Quoted 32 lines · Andreas Müller
Quoted 23 lines · Andrei Gherzan
Hello,
Quoted 10 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prioQuoted 7 lines
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
Petter Mabäcker (1):
layer.conf: set high layer priorityconf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 5 lines
Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--Quoted 5 lines
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.Quoted 6 lines
Are you trying to build for the RaspberryPi2?
I [temporarily] fixed this by copying the missing files. In the meta-raspberrypi layer, do
% rsync -a
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi{/,2}
Quoted 6 lines
ctoproject.org/listinfo/yocto
I checked both (I have simply copied xserver-xf86-config files for rpi2). Increasing Layer priority above 7 fails for me - have no idea why. What should this patch solve/enhance?
That command will let bitbake find the missing file:
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/ recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d/10-evdev.conf recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf
With this I was able to build for the rpi2. Too bad Newark hasn't delivered mine yet (although it was promised 10 days ago...)
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 71 lines · Gary Thomas
Quoted 58 lines · Andreas Müller
Quoted 49 lines · Gary Thomas
Quoted 39 lines · Andreas Müller
Quoted 27 lines · Andrei Gherzan
Hello,
Quoted 12 lines · Petter Mabäcker
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc:README: Github repo changed (2015-02-14 02:00:57 +0100)are available in the git repository at:
git://git.yoctoproject.org/poky-contribpetmab/rpi_layer_prioQuoted 7 lines
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
Petter Mabäcker (1):
layer.conf: set high layer priorityconf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 5 lines
Patch merged to master. Thanks Petter.
--
Andrei Gherzan
--Quoted 5 lines
This one breaks xserver-xf86-config for me
| Function failed: Fetcher failure for URL:
'file://xorg.conf.d/10-evdev.conf'. Unable to fetch URL from any source.Quoted 6 lines
Are you trying to build for the RaspberryPi2?
I [temporarily] fixed this by copying the missing files. In the meta-raspberrypi layer, do
% rsync -a
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi{/,2}Quoted 6 lines
ctoproject.org/listinfo/yocto
I checked both (I have simply copied xserver-xf86-config files for rpi2). Increasing Layer priority above 7 fails for me - have no idea why. What should this patch solve/enhance?
That command will let bitbake find the missing file:
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/ recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d
Quoted 6 lines
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d/10-evdev.conf
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.confWith this I was able to build for the rpi2. Too bad Newark hasn't delivered mine yet (although it was promised 10 days ago...)
To avoid misunderstandings: The problem came up (for me) by increasing layer priority and affects raspberrypi (I know files are missing for raspberrypi2)
Andreas
I have created a new ticket for the raspberrypi2 problem:
http://redmine.gherzan.com/issues/52
For the raspberrypi problem I
cannot reproduce this problem. For me it looks good using below revisions for poky and meta-raspberrypi:
meta-raspberrypi: 57c8e6b
rpi-base.inc: Include the RPI2 DTB
poky: 0aff275 layer.conf: bump
version as error-report interface changed
Andreas: Can you please
specify revisions you are using for poky and meta-raspberrypi? Would be great if you also can mail me log.do_fetch and log.do_patch (if such exists I understand it as it bails at do_fetch form your mail..) found in:
<yourproject>/tmp/work/raspberrypi-poky-linux-gnueabi/xserver-xf86-config/0.1-*/temp/ as well..
BR, Petter
2015-03-09 22:24 skrev Andreas Müller:
Quoted 1 line
On
Quoted 5 lines · Gary Thomas
Quoted 5 lines · Andreas Müller
Quoted 2 lines
On Mon, Mar 9,
Quoted 2 lines · Gary Thomas
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
On
Quoted 2 lines · Andreas Müller
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
On Sun, Mar 1, 2015
Quoted 2 lines · Andrei Gherzan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Petter Mabäcker
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
The following changes since commit
d8bf60ce6c4a6c6371527c6df2e3243d2771c0cc: README: Github repo changed (2015-02-14 02:00:57 +0100) are available in the git repository at:git://git.yoctoproject.org/poky-contrib petmab/rpi_layer_prio
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
[1] Petter Mabäcker (1): layer.conf: set high layer priority conf/layer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Patch merged to master. Thanks Petter. -- Andrei
Gherzan --
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
This one breaks xserver-xf86-config for me | Function
failed: Fetcher failure for URL: 'file://xorg.conf.d/10-evdev.conf [2]'. Unable to fetch URL from any source.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Are you trying to build for
the RaspberryPi2? I [temporarily] fixed this by copying the missing files. In the meta-raspberrypi layer, do % rsync -a recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi{/,2}
Quoted 1 line
Quoted 1 line
Quoted 1 line
ctoproject.org/listinfo/yocto I checked both (I have simply copied xserver-xf86-config files for rpi2). Increasing Layer priority above 7 fails for me - have no idea why. What should this patch solve/enhance?
Quoted 1 line
Quoted 1 line
That command will let bitbake find the missing file:
recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/ recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf.d/10-evdev.conf recipes-graphics/xorg-xserver/xserver-xf86-config/raspberrypi2/xorg.conf With this I was able to build for the rpi2. Too bad Newark hasn't delivered mine yet (although it was promised 10 days ago...)
Quoted 2 lines
To
avoid misunderstandings: The problem came up (for me) by increasing
Quoted 1 line
layer priority and affects raspberrypi (I know files are missing for
Quoted 1 line
raspberrypi2)
Quoted 2 lines
Andreas
Links:
------
[1]
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=petmab/rpi_layer_prio
[2]
file://xorg.conf.d/10-evdev.conf
Quoted 8 lines · Petter Mabäcker
I have created a new ticket for the raspberrypi2 problem:
http://redmine.gherzan.com/issues/52For the raspberrypi problem I cannot reproduce this problem. For me it looks good using below revisions for poky and meta-raspberrypi:
meta-raspberrypi: 57c8e6b rpi-base.inc: Include the RPI2 DTB
Quoted 8 lines
poky: 0aff275 layer.conf: bump version as error-report interface changed
Andreas: Can you please specify revisions you are using for poky and meta-raspberrypi? Would be great if you also can mail me log.do_fetch and log.do_patch (if such exists I understand it as it bails at
do_fetchform your mail..) found in:
Don't have logs here but 10-evdev.conf was not found. I checked: By increasing layer priority the fitting path to meta-raspberrypi was missing.
I am using angstrom/oe-core/meta-oe++/meta-qt5 and several bsp layers
(e.g meta-ti/meta-gumstix-community/meta-fsl-arm/meta-raspberrypi/meta-beagleboard-common..)
- can give further details later (have them at home).
What I don't understand so far: Why is this patch necessary and what was intended to fix?
Andreas
2015-03-11 10:39 skrev Andreas Müller:
Quoted 1 line
On Wed, Mar 11, 2015 at
Quoted 2 lines · Petter Mabäcker
Quoted 2 lines
I have created
a new ticket for the raspberrypi2 problem:
http://redmine.gherzan.com/issues/52 [1] For the raspberrypi problem I cannot reproduce this problem. For me it looks good using below revisions for poky and meta-raspberrypi: meta-raspberrypi: 57c8e6b rpi-base.inc: Include the RPI2 DTB poky: 0aff275 layer.conf: bump version as error-report interface changed Andreas: Can you please specify revisions you are using for poky and meta-raspberrypi? Would be great if you also can mail me log.do_fetch and log.do_patch (if such exists I understand it as it bails at do_fetch form your mail..) found in:
Quoted 2 lines
Don't have logs here but 10-evdev.conf was not found. I
checked: By
Quoted 1 line
increasing layer priority the fitting path to
meta-raspberrypi was
Quoted 3 lines
missing.
I am using
angstrom/oe-core/meta-oe++/meta-qt5 and several bsp layers
Quoted 1 line
(e.g
meta-ti/meta-gumstix-community/meta-fsl-arm/meta-raspberrypi/meta-beagleboard-common..)
Quoted 1 line
- can give further details later (have them at home).
Quoted 2 lines
What I don't
understand so far: Why is this patch necessary and what
Quoted 1 line
was intended
to fix?
Quoted 2 lines
Andreas
Ok, interesting. That explains why I cannot
reproduce the problem. The reason for the changeset is to ensure that we have a higher prio in meta-raspberrypi then in all its depended layers (currently meta-oe and meta-multimedia) since we always want to override with meta-raspberrypi specific stuffs in this case. So it doesn't solve a specific problem, but it prevent us for getting problems like the one you obviously has seen in your configuration due to this change.
It
might (at least currently) be OK to set layer prio = 7 in meta-raspberrypi, 9 was just to have some marginal. But it's not sure that "7" is enough without any modifications in some of the layers you are using. Can you give me the output of below command from your project (it will help me to understand where the problem really lies)?
$
bitbake-layers show-layers
Cheers, Petter
Links:
------
[1]
http://redmine.gherzan.com/issues/52