Misc improvements 1 from Mentor
cover Misc improvements 1 from Mentor
From: Christopher Larson <[email protected]>
This is the second of three pull requests / patch series from Mentor's queue of changes destined for oe-core master (not jethro). This series includes a few recipe improvements and adds the ability to supply and use wks files from a different layer than the image.
The following changes since commit e44ed8c18e395b9c055aefee113b90708e8a8a2f:
build-appliance-image: Update to jethro head revision (2015-11-03 14:02:57 +0000)
are available in the git repository at:
git://github.com/kergoth/openembedded-core mentor-misc-improvements-1-after-jethro
https://github.com/kergoth/openembedded-core/tree/mentor-misc-improvements-1-after-jethro
Christopher Larson (7):
image_types: improve wks path specification
sysprof: use packageconfig for the gui
sysprof: add missing gdk-pixbuf/pango deps
systemd: for valgrind, define VALGRIND=1
bluez5: enable sysvinit support
psplash: add systemd support
nativesdk-perl: set PERL5LIB based on wrapper path
meta/classes/image_types.bbclass | 22 ++++--- meta/recipes-connectivity/bluez5/bluez5.inc | 8 ++- meta/recipes-connectivity/bluez5/bluez5/init | 68 ++++++++++++++++++++++ .../psplash/files/psplash-quit.service | 11 ++++ .../psplash/files/psplash-start.service | 11 ++++ meta/recipes-core/psplash/psplash_git.bb | 20 +++++-- meta/recipes-core/systemd/systemd_225.bb | 3 + meta/recipes-devtools/perl/perl_5.22.0.bb | 4 +- .../sysprof/files/gui-argument.patch | 35 +++++++++++ meta/recipes-kernel/sysprof/sysprof_git.bb | 9 ++- 10 files changed, 174 insertions(+), 17 deletions(-) create mode 100644 meta/recipes-connectivity/bluez5/bluez5/init create mode 100755 meta/recipes-core/psplash/files/psplash-quit.service create mode 100755 meta/recipes-core/psplash/files/psplash-start.service create mode 100644 meta/recipes-kernel/sysprof/files/gui-argument.patch
Signature · 1 line
2.2.1
PATCH 1/7 image_types: improve wks path specification
From: Christopher Larson <[email protected]>
Hardcoding a full input path with zero flexibility goes against everything the Yocto Project is about. Rework it to let the user specify the wks base filename with WKS_FILE and it'll search the layers for the wks file and use it.
--- meta/classes/image_types.bbclass | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-)
meta/classes/image_types.bbclass +15 -7
@@ -170,15 +170,23 @@ IMAGE_CMD_ubi () { IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs ${MKUBIFS_ARGS}" +WKS_FILE ?= "${FILE_DIRNAME}/${IMAGE_BASENAME}.${MACHINE}.wks" +WKS_FULL_PATH = "${@bb.utils.which('${WKS_SEARCH_PATH}', '${WKS_FILE}') if not os.path.isabs('${WKS_FILE}') else '${WKS_FILE}'}" +WKS_FULL_PATH[vardepvalue] = "${WKS_FULL_PATH}" +WKS_SEARCH_PATH ?= "${@':'.join('%s/scripts/lib/wic/canned-wks' % l for l in '${BBLAYERS}'.split())}" + IMAGE_CMD_wic () { - out=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME} - wks=${FILE_DIRNAME}/${IMAGE_BASENAME}.${MACHINE}.wks - [ -e $wks ] || wks=${FILE_DIRNAME}/${IMAGE_BASENAME}.wks - [ -e $wks ] || bbfatal "Kiskstart file $wks doesn't exist" - BUILDDIR=${TOPDIR} wic create $wks --vars ${STAGING_DIR_TARGET}/imgdata/ -e ${IMAGE_BASENAME} -o $out/ - mv $out/build/${IMAGE_BASENAME}*.direct $out.rootfs.wic - rm -rf $out/ + out="${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}" + wks="${WKS_FULL_PATH}" + if [ ! -e "$wks" ]; then + bbfatal "Kickstart file $wks doesn't exist" + fi + + BUILDDIR="${TOPDIR}" wic create "$wks" --vars "${STAGING_DIR_TARGET}/imgdata/" -e "${IMAGE_BASENAME}" -o "$out/" + mv "$out/build/$(basename "${wks%.wks}")"*.direct "$out.rootfs.wic" + rm -rf "$out/" } +IMAGE_CMD_wic[file-checksums] += "${WKS_FULLPATH}" EXTRA_IMAGECMD = ""
Signature · 1 line
2.2.1
PATCH 2/7 sysprof: use packageconfig for the gui
From: Christopher Larson <[email protected]>
This makes the gtk dependencies optional.
--- .../sysprof/files/gui-argument.patch | 35 ++++++++++++++++++++++ meta/recipes-kernel/sysprof/sysprof_git.bb | 9 ++++-- 2 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 meta/recipes-kernel/sysprof/files/gui-argument.patch
meta/recipes-kernel/sysprof/files/gui-argument.patch new file +35 -0
@@ -0,0 +1,35 @@ +Add the ability to explicitly enable/diable GUI support + +Signed-off-by: Christopher Larson <[email protected]> +Upstream-status: Pending + +--- git.orig/configure.ac ++++ git/configure.ac +@@ -62,12 +62,24 @@ KMICRO=`uname -r | cut -d"." -f 3 | cut + # Pkgconfig dependencies + + core_dep="glib-2.0 >= 2.6.0" +-gui_dep="gtk+-2.0 > 2.6.0 gdk-pixbuf-2.0 pangoft2 libglade-2.0" + + PKG_CHECK_MODULES(CORE_DEP, $core_dep, [], AC_MSG_ERROR([sysprof dependencies not satisfied])) + +-build_gui=yes +-PKG_CHECK_MODULES(GUI_DEP, $gui_dep, [], build_gui=no) ++gui_dep="gtk+-2.0 > 2.6.0 gdk-pixbuf-2.0 pangoft2 libglade-2.0" ++ ++AC_ARG_ENABLE([gui], ++ [AS_HELP_STRING([--disable-gui], ++ [Disable GUI functionality (requires gtk+, gdk-pixbuf, pangoft2, libglade) @<:@default=auto@:>@])], ++ [], ++ [enable_gui=auto]) ++ ++build_gui=no ++AS_IF([test "x$enable_gui" != xno], ++ [PKG_CHECK_MODULES(GUI_DEP, $gui_dep, build_gui=yes, ++ [if test "x$enable_gui" != xauto; then ++ AC_MSG_FAILURE( ++ [--enable-gui was given, but gui dependencies were not satisfied]) ++ fi])]) + + AM_CONDITIONAL([BUILD_GUI], [test "$build_gui" = yes]) +
meta/recipes-kernel/sysprof/sysprof_git.bb +6 -3
@@ -2,13 +2,14 @@ SUMMARY = "System-wide Performance Profiler for Linux" LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f" -DEPENDS = "gtk+ libglade" +DEPENDS = "glib-2.0" SRCREV = "cd44ee6644c3641507fb53b8a2a69137f2971219" PV = "1.2.0+git${SRCPV}" SRC_URI = "git://git.gnome.org/sysprof \ file://define-NT_GNU_BUILD_ID.patch \ + file://gui-argument.patch \ " SRC_URI_append_arm = " file://rmb-arm.patch"
@@ -19,8 +20,10 @@ SRC_URI_append_mips64n32 = " file://rmb-mips.patch" S = "${WORKDIR}/git" -inherit autotools pkgconfig distro_features_check -ANY_OF_DISTRO_FEATURES = "${GTK2DISTROFEATURES}" +inherit autotools pkgconfig + +PACKAGECONFIG ?= "${@bb.utils.contains_any('DISTRO_FEATURES', '${GTK2DISTROFEATURES}', 'gui', '', d)}" +PACKAGECONFIG[gui] = "--enable-gui,--disable-gui,gtk+ libglade" # We do not yet work for aarch64. #
Signature · 1 line
2.2.1
Re: [PATCH 2/7] sysprof: use packageconfig for the gui
Quoted 20 lines · Christopher Larson
From: Christopher Larson <[email protected]>
This makes the gtk dependencies optional.
Signed-off-by Christopher Larson <[email protected]>--- .../sysprof/files/gui-argument.patch | 35 ++++++++++++++++++++++ meta/recipes-kernel/sysprof/sysprof_git.bb | 9 ++++-- 2 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 meta/recipes-kernel/sysprof/files/gui-argument.patchmeta/recipes-kernel/sysprof/files/gui-argument.patch new file +0
-0
meta/recipes-kernel/sysprof/files/gui-argument.patch line 1
Quoted 1 line
meta/recipes-kernel/sysprof/files/gui-argument.patch new file +1
-0@@ -0,0 +1,35 @@ +Add the ability to explicitly enable/diable GUI support
And there's a typo in this patch description. Hrmph.
Signature · 5 lines
Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics
PATCH 3/7 sysprof: add missing gdk-pixbuf/pango deps
In reply to Christopher LarsonFrom: Christopher Larson <[email protected]>
These are explicitly checked with pkg-config in the configure script.
--- meta/recipes-kernel/sysprof/sysprof_git.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-kernel/sysprof/sysprof_git.bb +1 -1
@@ -23,7 +23,7 @@ S = "${WORKDIR}/git" inherit autotools pkgconfig PACKAGECONFIG ?= "${@bb.utils.contains_any('DISTRO_FEATURES', '${GTK2DISTROFEATURES}', 'gui', '', d)}" -PACKAGECONFIG[gui] = "--enable-gui,--disable-gui,gtk+ libglade" +PACKAGECONFIG[gui] = "--enable-gui,--disable-gui,gtk+ gdk-pixbuf pango libglade" # We do not yet work for aarch64. #
Signature · 1 line
2.2.1
PATCH 4/7 systemd: for valgrind, define VALGRIND=1
In reply to Christopher LarsonFrom: Christopher Larson <[email protected]>
Per the systemd README, this should be defined to run systemd under valgrind, otherwise false positives will be triggered.
--- meta/recipes-core/systemd/systemd_225.bb | 3 +++ 1 file changed, 3 insertions(+)
meta/recipes-core/systemd/systemd_225.bb +3 -0
@@ -127,6 +127,9 @@ EXTRA_OECONF = " --with-rootprefix=${rootprefix} \ # uclibc does not have NSS EXTRA_OECONF_append_libc-uclibc = " --disable-myhostname " +# per the systemd README, define VALGRIND=1 to run under valgrind +CFLAGS .= "${@base_contains('PACKAGECONFIG', 'valgrind$', ' -DVALGRIND=1', '', d)}" + # disable problematic GCC 5.2 optimizations [YOCTO #8291] FULL_OPTIMIZATION_append_arm = " -fno-schedule-insns -fno-schedule-insns2"
Signature · 1 line
2.2.1
PATCH 5/7 bluez5: enable sysvinit support
In reply to Christopher LarsonFrom: Christopher Larson <[email protected]>
This is from Shrikant Bobade <[email protected]>.
--- meta/recipes-connectivity/bluez5/bluez5.inc | 8 +++- meta/recipes-connectivity/bluez5/bluez5/init | 68 ++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+), 1 deletion(-) create mode 100644 meta/recipes-connectivity/bluez5/bluez5/init
meta/recipes-connectivity/bluez5/bluez5.inc +7 -1
@@ -18,10 +18,11 @@ PACKAGECONFIG[experimental] = "--enable-experimental,--disable-experimental," SRC_URI = "\ ${KERNELORG_MIRROR}/linux/bluetooth/bluez-${PV}.tar.xz \ + file://init \ " S = "${WORKDIR}/bluez-${PV}" -inherit autotools-brokensep pkgconfig systemd +inherit autotools-brokensep pkgconfig systemd update-rc.d EXTRA_OECONF = "\ --enable-tools \
@@ -42,6 +43,9 @@ NOINST_TOOLS = " \ " do_install_append() { + install -d ${D}${INIT_D_DIR} + install -m 0755 ${WORKDIR}/init ${D}${INIT_D_DIR}/bluetooth + install -d ${D}${sysconfdir}/bluetooth/ if [ -f ${S}/profiles/audio/audio.conf ]; then install -m 0644 ${S}/profiles/audio/audio.conf ${D}/${sysconfdir}/bluetooth/
@@ -100,5 +104,7 @@ FILES_${PN}-dbg += "\ RDEPENDS_${PN}-testtools += "python python-dbus python-pygobject" SYSTEMD_SERVICE_${PN} = "bluetooth.service" +INITSCRIPT_PACKAGES = "${PN}" +INITSCRIPT_NAME_${PN} = "bluetooth" EXCLUDE_FROM_WORLD = "1"
meta/recipes-connectivity/bluez5/bluez5/init new file +68 -0
68 lines not on this page · raw message
Signature · 1 line
2.2.1
PATCH 6/7 psplash: add systemd support
In reply to Christopher LarsonFrom: Christopher Larson <[email protected]>
--- meta/recipes-core/psplash/files/psplash-quit.service | 11 +++++++++++ .../recipes-core/psplash/files/psplash-start.service | 11 +++++++++++ meta/recipes-core/psplash/psplash_git.bb | 20 +++++++++++++++----- 3 files changed, 37 insertions(+), 5 deletions(-) create mode 100755 meta/recipes-core/psplash/files/psplash-quit.service create mode 100755 meta/recipes-core/psplash/files/psplash-start.service
meta/recipes-core/psplash/files/psplash-quit.service new file +11 -0
@@ -0,0 +1,11 @@ +[Unit] +Description=Terminate Psplash Boot Screen +After=psplash-start.service + +[Service] +Type=oneshot +ExecStart=/usr/bin/psplash-write QUIT +TimeoutSec=20 + +[Install] +WantedBy=multi-user.target
meta/recipes-core/psplash/files/psplash-start.service new file +11 -0
@@ -0,0 +1,11 @@ +[Unit] +Description=Starts Psplash Boot screen +Wants=systemd-vconsole-setup.service +After=systemd-vconsole-setup.service systemd-udev-trigger.service systemd-udevd.service +DefaultDependencies=no + +[Service] +ExecStart=/usr/bin/psplash + +[Install] +WantedBy=sysinit.target
meta/recipes-core/psplash/psplash_git.bb +15 -5
@@ -12,6 +12,8 @@ PR = "r15" SRC_URI = "git://git.yoctoproject.org/${BPN} \ file://0001-psplash-fb-Convert-psplash_fb_plot_pixel-to-a-static.patch \ file://psplash-init \ + file://psplash-start.service \ + file://psplash-quit.service \ ${SPLASH_IMAGES}" SPLASH_IMAGES = "file://psplash-poky-img.h;outsuffix=default"
@@ -66,11 +68,13 @@ python __anonymous() { S = "${WORKDIR}/git" -inherit autotools pkgconfig update-rc.d update-alternatives +inherit autotools pkgconfig update-rc.d update-alternatives systemd ALTERNATIVE_PRIORITY = "100" ALTERNATIVE_LINK_NAME[psplash] = "${bindir}/psplash" +SYSTEMD_SERVICE_${PN} = "psplash-start.service psplash-quit.service" + python do_compile () { import shutil
@@ -97,8 +101,15 @@ python do_compile () { do_install_append() { install -d ${D}/mnt/.psplash/ - install -d ${D}${sysconfdir}/init.d/ - install -m 0755 ${WORKDIR}/psplash-init ${D}${sysconfdir}/init.d/psplash.sh + if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'true', 'false', d)}; then + install -d ${D}${sysconfdir}/init.d/ + install -m 0755 ${WORKDIR}/psplash-init ${D}${sysconfdir}/init.d/psplash.sh + fi + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -d ${D}${systemd_unitdir}/system + install -m 0644 ${WORKDIR}/psplash-quit.service ${D}${systemd_unitdir}/system + install -m 0644 ${WORKDIR}/psplash-start.service ${D}${systemd_unitdir}/system + fi install -d ${D}${bindir} for i in ${SPLASH_INSTALL} ; do install -m 0755 $i ${D}${bindir}/$i
@@ -111,9 +122,8 @@ FILES_${PN} += "/mnt/.psplash" INITSCRIPT_NAME = "psplash.sh" INITSCRIPT_PARAMS = "start 0 S . stop 20 0 1 6 ." -DEPENDS_append = " ${@bb.utils.contains('DISTRO_FEATURES','systemd','systemd-systemctl-native','',d)}" pkg_postinst_${PN} () { - if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then if [ -n "$D" ]; then OPTS="--root=$D" fi
Signature · 1 line
2.2.1
PATCH 7/7 nativesdk-perl: set PERL5LIB based on wrapper path
In reply to Christopher LarsonFrom: Christopher Larson <[email protected]>
Rather than relying on OECORE_NATIVE_SYSROOT, we can operate relative to the wrapper binary location.
--- meta/recipes-devtools/perl/perl_5.22.0.bb | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
meta/recipes-devtools/perl/perl_5.22.0.bb +3 -1
@@ -244,9 +244,11 @@ do_install() { ln -s Config_heavy.pl ${D}${libdir}/perl/${PV}/Config_heavy-target.pl } +REL_PERLLIB = "${@os.path.relpath('${libdir}', '${bindir}')}/perl" + do_install_append_class-nativesdk () { create_wrapper ${D}${bindir}/perl \ - PERL5LIB='$PERL5LIB:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/site_perl/${PV}:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/vendor_perl/${PV}:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/${PV}' + PERL5LIB='$PERL5LIB:`dirname $realpath`/${REL_PERLLIB}/site_perl/${PV}:`dirname $realpath`/${REL_PERLLIB}/vendor_perl/${PV}:`dirname $realpath`/${REL_PERLLIB}/${PV}' } PACKAGE_PREPROCESS_FUNCS += "perl_package_preprocess"
Signature · 1 line
2.2.1
Re: [PATCH 7/7] nativesdk-perl: set PERL5LIB based on wrapper path
Quoted 26 lines · Christopher Larson
From: Christopher Larson <[email protected]>
Rather than relying on
OECORE_NATIVE_SYSROOT, we can operate relative to the
wrapper binary location.Signed-off-by Christopher Larson <[email protected]>--- meta/recipes-devtools/perl/perl_5.22.0.bb | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)meta/recipes-devtools/perl/perl_5.22.0.bb +0
-0@@ -244,9 +244,11 @@ do_install() { ln -s Config_heavy.pl
${D}${libdir}/perl/${PV}/Config_heavy-target.pl
}meta/recipes-devtools/perl/perl_5.22.0.bb +2
-1+REL_PERLLIB = "${@os.path.relpath('${libdir}', '${bindir}')}/perl" + do_install_append_class-nativesdk () { create_wrapper ${D}${bindir}/perl \ -
Quoted 6 lines
PERL5LIB='$PERL5LIB:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/site_perl/${PV}:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/vendor_perl/${PV}:$OECORE_NATIVE_SYSROOT/${libdir_nativesdk}/perl/${PV}'
+ PERL5LIB='$PERL5LIB:`dirname
$realpath/${REL_PERLLIB}/site_perl/${PV}:dirname
$realpath/${REL_PERLLIB}/vendor_perl/${PV}:dirname
$realpath`/${REL_PERLLIB}/${PV}'
Hmm, perhaps create_wrapper should be altered to provide the binary dirname as a variable so we can easily reference it, avoiding the need to repeatedly dirname here.
Signature · 5 lines
Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics
Re: [PATCH 1/7] image_types: improve wks path specification
In reply to Christopher LarsonQuoted 48 lines · Christopher Larson
From: Christopher Larson <[email protected]>
Hardcoding a full input path with zero flexibility goes against everything the
Yocto Project is about. Rework it to let the user specify the wks base filename withWKS_FILEand it'll search the layers for the wks file and use it.Signed-off-by Christopher Larson <[email protected]>--- meta/classes/image_types.bbclass | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-)meta/classes/image_types.bbclass +0
-0@@ -170,15 +170,23 @@ IMAGE_CMD_ubi () { IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs ${MKUBIFS_ARGS}"
meta/classes/image_types.bbclass +2
-0+WKS_FILE ?= "${FILE_DIRNAME}/${IMAGE_BASENAME}.${MACHINE}.wks" +WKS_FULL_PATH = "${@bb.utils.which('${WKS_SEARCH_PATH}', '${WKS_FILE}')if not
os.path.isabs('${WKS_FILE}')else '${WKS_FILE}'}"meta/classes/image_types.bbclass +2
-0+WKS_FULL_PATH[vardepvalue] = "${WKS_FULL_PATH}" +WKS_SEARCH_PATH ?= "${@':'.join('%s/scripts/lib/wic/canned-wks' % l for lin '${BBLAYERS}'.split())}"
meta/classes/image_types.bbclass +1
-5+ IMAGE_CMD_wic () { - out=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME} - wks=${FILE_DIRNAME}/${IMAGE_BASENAME}.${MACHINE}.wks - [ -e $wks ] || wks=${FILE_DIRNAME}/${IMAGE_BASENAME}.wks - [ -e $wks ] || bbfatal "Kiskstart file $wks doesn't exist" - BUILDDIR=${TOPDIR} wic create $wks --vars${STAGING_DIR_TARGET}/imgdata/ -e ${IMAGE_BASENAME} -o $out/
meta/classes/image_types.bbclass +7
-2- mv $out/build/${IMAGE_BASENAME}*.direct $out.rootfs.wic - rm -rf $out/ + out="${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}" + wks="${WKS_FULL_PATH}" + if [ ! -e "$wks" ]; then + bbfatal "Kickstart file $wks doesn't exist" + fi + + BUILDDIR="${TOPDIR}" wic create "$wks" --vars"${STAGING_DIR_TARGET}/imgdata/" -e "${IMAGE_BASENAME}" -o "$out/"
meta/classes/image_types.bbclass IMAGE_CMD_ubi () { · line 189
Quoted 4 lines
meta/classes/image_types.bbclass +3
-0+ mv "$out/build/$(basename "${wks%.wks}")"*.direct "$out.rootfs.wic" + rm -rf "$out/" } +IMAGE_CMD_wic[file-checksums] += "${WKS_FULLPATH}"
Gah, I'll have to fix this and re-submit if needed, the varname is typoed, missing _. Also, it might be worth excluding WKS_FULL_PATH from vardeps entirely -- having to rerun the image build if a layer is moved isn't ideal, and we already have it in file-checksums.
Signature · 5 lines
Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics
Re: [PATCH 1/7] image_types: improve wks path specification
On Thu, Nov 12, 2015 at 4:46 PM, Christopher Larson <[email protected]
Quoted 18 lines
wrote:
Quoted 11 lines · Christopher Larson
From: Christopher Larson <[email protected]>
Hardcoding a full input path with zero flexibility goes against everything the
Yocto Project is about. Rework it to let the user specify the wks base filename withWKS_FILEand it'll search the layers for the wks file and use
it.Signed-off-by Christopher Larson <[email protected]>
I'm reworking this. v2 series forthcoming.
Signature · 5 lines
Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Maintainer - Tslib Senior Software Engineer, Mentor Graphics