Various upgrades

deleted file mode 100644
index 8e83957..0000000
@@ -1,41 +0,0 @@
-Upstream-Status: Backport
-Signed-off-by: Jussi Kukkonen <[email protected]>
-
-
-
-From f8cce5f6cb2958a4074f87cd345bfe46e0dda6e1 Mon Sep 17 00:00:00 2001
-From: "Jasper St. Pierre" <[email protected]>
-Date: Mon, 20 Apr 2015 12:08:29 -0700
-Subject: cogl-framebuffer-gl: Work again on GLESv2
-
-
-diff --git a/cogl/driver/gl/cogl-framebuffer-gl.c b/cogl/driver/gl/cogl-framebuffer-gl.c
-index 793b10b..609cfb3 100644
---- a/cogl/driver/gl/cogl-framebuffer-gl.c
-+++ b/cogl/driver/gl/cogl-framebuffer-gl.c
-@@ -107,6 +107,12 @@
- #ifndef GL_PACK_INVERT_MESA
- #define GL_PACK_INVERT_MESA 0x8758
- #endif
-+#ifndef GL_BACK_LEFT
-+#define GL_BACK_LEFT				0x0402
-+#endif
-+#ifndef GL_BACK_RIGHT
-+#define GL_BACK_RIGHT				0x0403
-+#endif
- 
- #ifndef GL_COLOR
- #define GL_COLOR 0x1800
-@@ -245,6 +251,9 @@ _cogl_framebuffer_gl_flush_stereo_mode_state (CoglFramebuffer *framebuffer)
-   if (framebuffer->type == COGL_FRAMEBUFFER_TYPE_OFFSCREEN)
-     return;
- 
-+  if (!ctx->glDrawBuffer)
-+    return;
-+
-   /* The one-shot default draw buffer setting in _cogl_framebuffer_gl_bind
-    * must have already happened. If not it would override what we set here. */
-   g_assert (ctx->was_bound_to_onscreen);
--- 
-cgit v0.10.2
-

deleted file mode 100644
index d20b814..0000000
@@ -1,8 +0,0 @@
-require cogl-1.0.inc
-
-SRC_URI += "file://cogl-framebuffer-gl-Work-again-on-GLESv2.patch"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=1b1a508d91d25ca607c83f92f3e31c84"
-SRC_URI[archive.md5sum] = "5b28897194d9ff76a574a9493d1f7ee0"
-SRC_URI[archive.sha256sum] = "729e35495829e7d31fafa3358e47b743ba21a2b08ff9b6cd28fb74c0de91192b"
-

new file mode 100644
index 0000000..3b1e199
@@ -0,0 +1,5 @@
+require cogl-1.0.inc
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=1b1a508d91d25ca607c83f92f3e31c84"
+SRC_URI[archive.md5sum] = "ab684ec96848d79d22757fb3064820c8"
+SRC_URI[archive.sha256sum] = "689dfb5d14fc1106e9d2ded0f7930dcf7265d0bc84fa846b4f03941633eeaa91"

similarity index 59%
rename from meta/recipes-graphics/clutter/clutter-1.0_1.22.4.bb
rename to meta/recipes-graphics/clutter/clutter-1.0_1.24.2.bb
index 418cdfd..093bf6e 100644
@@ -2,9 +2,8 @@ require clutter-1.0.inc
 
 LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c"
 
-SRC_URI[archive.md5sum] = "26494256c980d49703a553916e3083cd"
-SRC_URI[archive.sha256sum] = "1d77ce16025f87667a1d00dc4fa617a1935156f63fd17635fdadf138866c9e1e"
-
+SRC_URI[archive.md5sum] = "3b98e1b33719982a5736ae42cbf7183e"
+SRC_URI[archive.sha256sum] = "9631c98cb4bcbfec15e1bbe9eaa6eef0f127201552fce40d7d28f2133803cd63"
 SRC_URI += "file://install-examples.patch \
             file://run-installed-tests-with-tap-output.patch \
             file://run-ptest"

similarity index 58%
rename from meta/recipes-graphics/clutter/clutter-gst-3.0_3.0.8.bb
rename to meta/recipes-graphics/clutter/clutter-gst-3.0_3.0.14.bb
index 319a955..deedf7c 100644
@@ -3,5 +3,5 @@ require clutter-gst-3.0.inc
 LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c \
                     file://clutter-gst/clutter-gst.h;beginline=1;endline=24;md5=95baacba194e814c110ea3bdf25ddbf4"
 
-SRC_URI[archive.md5sum] = "f7d97f96e7cca82f38317d1734d5dadb"
-SRC_URI[archive.sha256sum] = "582e85b88482e16f7ec719363e38fadf84fab4d4baaa21e5227a454b824f135c"
+SRC_URI[archive.md5sum] = "635df0aef328fdcb8b2b565525dec3be"
+SRC_URI[archive.sha256sum] = "f7c8a7dc479759cad5ff7483cb5a1abbe3efd0b4f83ed0e443dc602430a82de2"

deleted file mode 100644
index 530ea18..0000000
@@ -1,6 +0,0 @@
-require clutter-gtk-1.0.inc
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=7fbc338309ac38fefcd64b04bb903e34"
-
-SRC_URI[archive.md5sum] = "557d814c3e70cc3a2d1cf3816919b14f"
-SRC_URI[archive.sha256sum] = "bbd03dfa9a20102d5cdb440513b0a035933da557ad7e9da31546034de2daf069"

new file mode 100644
index 0000000..23257bb
@@ -0,0 +1,6 @@
+require clutter-gtk-1.0.inc
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=7fbc338309ac38fefcd64b04bb903e34"
+
+SRC_URI[archive.md5sum] = "79dc3d7a8645f87d83a9ccca8a08aa8e"
+SRC_URI[archive.sha256sum] = "9440a68600f58d00fe0af35383738943e8ead9907f4cf507a102d96822434a28"

similarity index 71%
rename from meta/recipes-gnome/gnome/gnome-common_3.14.0.bb
rename to meta/recipes-gnome/gnome/gnome-common_3.18.0.bb
index 80b7033..06f3bb3 100644
@@ -8,8 +8,8 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 SECTION = "x11/gnome"
 inherit gnomebase allarch
 
-SRC_URI[archive.md5sum] = "ba58c61d0d81b7c3ff8452c620513a9d"
-SRC_URI[archive.sha256sum] = "4c00242f781bb441289f49dd80ed1d895d84de0c94bfc2c6818a104c9e39262c"
+SRC_URI[archive.md5sum] = "933258d9c23e218eb6eec9cc1951b053"
+SRC_URI[archive.sha256sum] = "22569e370ae755e04527b76328befc4c73b62bfd4a572499fde116b8318af8cf"
 
 EXTRA_AUTORECONF = ""
 DEPENDS = ""

similarity index 69%
rename from meta/recipes-gnome/gsettings-desktop-schemas/gsettings-desktop-schemas_3.16.1.bb
rename to meta/recipes-gnome/gsettings-desktop-schemas/gsettings-desktop-schemas_3.18.1.bb
index f2f2c75..6904666 100644
@@ -9,5 +9,6 @@ DEPENDS = "glib-2.0 intltool-native gobject-introspection-stub-native"
 
 inherit gnomebase gsettings gettext
 
-SRC_URI[archive.md5sum] = "baebbcf3c20591f98876e42fb0a3fd35"
-SRC_URI[archive.sha256sum] = "74fe9fdad510c8a6666febeceb7ebafc581ef990b3afcc8c1e8b5d90b24b3461"
+SRC_URI[archive.md5sum] = "e7ec56bb55013e89500c8f3ae6fcf738"
+SRC_URI[archive.sha256sum] = "258713b2a3dc6b6590971bcfc81f98d78ea9827d60e2f55ffbe40d9cd0f99a1a"
+

index 4cd1baf..e9defad 100644
@@ -1,22 +1,20 @@
-From 174aa7206f4b308d4d2292bb8067a07d8cc715c0 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <[email protected]>
-Date: Tue, 29 Apr 2014 07:29:32 +0200
-Subject: [PATCH] Reinstate xdg-terminal
+From 37e227ae1766568d8de55e268bb69bc15eee3529 Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <[email protected]>
+Date: Thu, 26 Nov 2015 16:01:47 +0200
+Subject: [PATCH] Enable xdg-terminal
 
-Signed-off-by: Koen Kooi <[email protected]>
+Upstream-Status: Inappropriate [configuration]
 
-Upstream-Status: Inappropriate [Revert]
+Signed-off-by: Jussi Kukkonen <[email protected]>
 ---
- scripts/Makefile.in  |   6 +-
- scripts/xdg-terminal | 622 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 625 insertions(+), 3 deletions(-)
- create mode 100755 scripts/xdg-terminal
+ scripts/Makefile.in | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/scripts/Makefile.in b/scripts/Makefile.in
-index 2c7d2ac..bef10d1 100644
+index d167393..430032d 100644
 --- a/scripts/Makefile.in
 +++ b/scripts/Makefile.in
-@@ -20,11 +20,11 @@ SCRIPTS		= \
+@@ -20,7 +20,8 @@ SCRIPTS		= \
      xdg-open \
      xdg-email \
      xdg-screensaver \

@@ -26,647 +24,6 @@ index 2c7d2ac..bef10d1 100644
  #    xdg-su
  #    xdg-copy \
  #    xdg-file-dialog
--#    xdg-terminal
- 
- MANPAGES=	$(SCRIPTS:%=man/%.1)
- WEBPAGES=	$(SCRIPTS:%=%.html)
-@@ -42,7 +42,7 @@ release:	scripts html man
- 	rm -f xdg-*.in *~ HACKING generate-help-script.awk
- 	rm -rf desc/
- 	rm -rf xsl/
--	rm -f xdg-file-dialog xdg-su xdg-copy xdg-terminal
-+	rm -f xdg-file-dialog xdg-su xdg-copy
- 
- distclean: clean
- 	rm -f Makefile
-diff --git a/scripts/xdg-terminal b/scripts/xdg-terminal
-new file mode 100755
-index 0000000..4bd9205
---- /dev/null
-+++ b/scripts/xdg-terminal
-@@ -0,0 +1,622 @@
-+#!/bin/sh
-+#---------------------------------------------
-+#   xdg-terminal
-+#
-+#   Utility script to open the registered terminal emulator
-+#
-+#   Refer to the usage() function below for usage.
-+#
-+#   Copyright 2009-2010, Fathi Boudra <[email protected]>
-+#   Copyright 2009-2010, Rex Dieter <[email protected]>
-+#   Copyright 2006, Kevin Krammer <[email protected]>
-+#
-+#   LICENSE:
-+#
-+#   Permission is hereby granted, free of charge, to any person obtaining a
-+#   copy of this software and associated documentation files (the "Software"),
-+#   to deal in the Software without restriction, including without limitation
-+#   the rights to use, copy, modify, merge, publish, distribute, sublicense,
-+#   and/or sell copies of the Software, and to permit persons to whom the
-+#   Software is furnished to do so, subject to the following conditions:
-+#
-+#   The above copyright notice and this permission notice shall be included
-+#   in all copies or substantial portions of the Software.
-+#
-+#   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-+#   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+#   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
-+#   THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-+#   OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-+#   ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+#   OTHER DEALINGS IN THE SOFTWARE.
-+#
-+#---------------------------------------------
-+
-+manualpage()
-+{
-+cat << _MANUALPAGE
-+Name
-+
-+   xdg-terminal - opens the user's preferred terminal emulator application
-+
-+Synopsis
-+
-+   xdg-terminal [command]
-+
-+   xdg-terminal { --help | --manual | --version }
-+
-+Description
-+
-+   xdg-terminal opens the user's preferred terminal emulator application. If
-+   a command is provided the command will be executed by the shell within the
-+   newly opened terminal window.
-+
-+   xdg-terminal is for use inside a desktop session only. It is not
-+   recommended to use xdg-terminal as root.
-+
-+Options
-+
-+   --help
-+           Show command synopsis.
-+
-+   --manual
-+           Show this manual page.
-+
-+   --version
-+           Show the xdg-utils version information.
-+
-+Exit Codes
-+
-+   An exit code of 0 indicates success while a non-zero exit code indicates
-+   failure. The following failure codes can be returned:
-+
-+   1
-+           Error in command line syntax.
-+
-+   3
-+           A required tool could not be found.
-+
-+   4
-+           The action failed.
-+
-+Examples
-+
-+ xdg-terminal
-+
-+   Opens the user's default terminal emulator, just starting an interactive
-+   shell.
-+
-+ xdg-terminal top
-+
-+   Opens the user's default terminal emulator and lets it run the top
-+   executable.
-+_MANUALPAGE
-+}
-+
-+usage()
-+{
-+cat << _USAGE
-+   xdg-terminal - opens the user's preferred terminal emulator application
-+
-+Synopsis
-+
-+   xdg-terminal [command]
-+
-+   xdg-terminal { --help | --manual | --version }
-+
-+_USAGE
-+}
-+
-+#@xdg-utils-common@
-+
-+#----------------------------------------------------------------------------
-+#   Common utility functions included in all XDG wrapper scripts
-+#----------------------------------------------------------------------------
-+
-+DEBUG()
-+{
-+  [ -z "${XDG_UTILS_DEBUG_LEVEL}" ] && return 0;
-+  [ ${XDG_UTILS_DEBUG_LEVEL} -lt $1 ] && return 0;
-+  shift
-+  echo "$@" >&2
-+}
-+
-+# This handles backslashes but not quote marks.
-+first_word()
-+{
-+    read first rest
-+    echo "$first"
-+}
-+
-+#-------------------------------------------------------------
-+# map a binary to a .desktop file
-+binary_to_desktop_file()
-+{
-+    search="${XDG_DATA_HOME:-$HOME/.local/share}:${XDG_DATA_DIRS:-/usr/local/share:/usr/share}"
-+    binary="`which "$1"`"
-+    binary="`readlink -f "$binary"`"
-+    base="`basename "$binary"`"
-+    IFS=:
-+    for dir in $search; do
-+        unset IFS
-+        [ "$dir" ] || continue
-+        [ -d "$dir/applications" ] || [ -d "$dir/applnk" ] || continue
-+        for file in "$dir"/applications/*.desktop "$dir"/applications/*/*.desktop "$dir"/applnk/*.desktop "$dir"/applnk/*/*.desktop; do
-+            [ -r "$file" ] || continue
-+            # Check to make sure it's worth the processing.
-+            grep -q "^Exec.*$base" "$file" || continue
-+            # Make sure it's a visible desktop file (e.g. not "preferred-web-browser.desktop").
-+            grep -Eq "^(NoDisplay|Hidden)=true" "$file" && continue
-+            command="`grep -E "^Exec(\[[^]=]*])?=" "$file" | cut -d= -f 2- | first_word`"
-+            command="`which "$command"`"
-+            if [ x"`readlink -f "$command"`" = x"$binary" ]; then
-+                # Fix any double slashes that got added path composition
-+                echo "$file" | sed -e 's,//*,/,g'
-+                return
-+            fi
-+        done
-+    done
-+}
-+
-+#-------------------------------------------------------------
-+# map a .desktop file to a binary
-+## FIXME: handle vendor dir case
-+desktop_file_to_binary()
-+{
-+    search="${XDG_DATA_HOME:-$HOME/.local/share}:${XDG_DATA_DIRS:-/usr/local/share:/usr/share}"
-+    desktop="`basename "$1"`"
-+    IFS=:
-+    for dir in $search; do
-+        unset IFS
-+        [ "$dir" ] && [ -d "$dir/applications" ] || continue
-+        file="$dir/applications/$desktop"
-+        [ -r "$file" ] || continue
-+        # Remove any arguments (%F, %f, %U, %u, etc.).
-+        command="`grep -E "^Exec(\[[^]=]*])?=" "$file" | cut -d= -f 2- | first_word`"
-+        command="`which "$command"`"
-+        readlink -f "$command"
-+        return
-+    done
-+}
-+
-+#-------------------------------------------------------------
-+# Exit script on successfully completing the desired operation
-+
-+exit_success()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "$@"
-+        echo
-+    fi
-+
-+    exit 0
-+}
-+
-+
-+#-----------------------------------------
-+# Exit script on malformed arguments, not enough arguments
-+# or missing required option.
-+# prints usage information
-+
-+exit_failure_syntax()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+        echo "Try 'xdg-terminal --help' for more information." >&2
-+    else
-+        usage
-+        echo "Use 'man xdg-terminal' or 'xdg-terminal --manual' for additional info."
-+    fi
-+
-+    exit 1
-+}
-+
-+#-------------------------------------------------------------
-+# Exit script on missing file specified on command line
-+
-+exit_failure_file_missing()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+    fi
-+
-+    exit 2
-+}
-+
-+#-------------------------------------------------------------
-+# Exit script on failure to locate necessary tool applications
-+
-+exit_failure_operation_impossible()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+    fi
-+
-+    exit 3
-+}
-+
-+#-------------------------------------------------------------
-+# Exit script on failure returned by a tool application
-+
-+exit_failure_operation_failed()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+    fi
-+
-+    exit 4
-+}
-+
-+#------------------------------------------------------------
-+# Exit script on insufficient permission to read a specified file
-+
-+exit_failure_file_permission_read()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+    fi
-+
-+    exit 5
-+}
-+
-+#------------------------------------------------------------
-+# Exit script on insufficient permission to write a specified file
-+
-+exit_failure_file_permission_write()
-+{
-+    if [ $# -gt 0 ]; then
-+        echo "xdg-terminal: $@" >&2
-+    fi
-+
-+    exit 6
-+}
-+
-+check_input_file()
-+{
-+    if [ ! -e "$1" ]; then
-+        exit_failure_file_missing "file '$1' does not exist"
-+    fi
-+    if [ ! -r "$1" ]; then
-+        exit_failure_file_permission_read "no permission to read file '$1'"
-+    fi
-+}
-+
-+check_vendor_prefix()
-+{
-+    file_label="$2"
-+    [ -n "$file_label" ] || file_label="filename"
-+    file=`basename "$1"`
-+    case "$file" in
-+       [[:alpha:]]*-*)
-+         return
-+         ;;
-+    esac
-+
-+    echo "xdg-terminal: $file_label '$file' does not have a proper vendor prefix" >&2
-+    echo 'A vendor prefix consists of alpha characters ([a-zA-Z]) and is terminated' >&2
-+    echo 'with a dash ("-"). An example '"$file_label"' is '"'example-$file'" >&2
-+    echo "Use --novendor to override or 'xdg-terminal --manual' for additional info." >&2
-+    exit 1
-+}
-+
-+check_output_file()
-+{
-+    # if the file exists, check if it is writeable
-+    # if it does not exists, check if we are allowed to write on the directory
-+    if [ -e "$1" ]; then
-+        if [ ! -w "$1" ]; then
-+            exit_failure_file_permission_write "no permission to write to file '$1'"
-+        fi
-+    else
-+        DIR=`dirname "$1"`
-+        if [ ! -w "$DIR" ] || [ ! -x "$DIR" ]; then
-+            exit_failure_file_permission_write "no permission to create file '$1'"
-+        fi
-+    fi
-+}
-+
-+#----------------------------------------
-+# Checks for shared commands, e.g. --help
-+
-+check_common_commands()
-+{
-+    while [ $# -gt 0 ] ; do
-+        parm="$1"
-+        shift
-+
-+        case "$parm" in
-+            --help)
-+            usage
-+            echo "Use 'man xdg-terminal' or 'xdg-terminal --manual' for additional info."
-+            exit_success
-+            ;;
-+
-+            --manual)
-+            manualpage
-+            exit_success
-+            ;;
-+
-+            --version)
-+            echo "xdg-terminal 1.1.0 rc1"
-+            exit_success
-+            ;;
-+        esac
-+    done
-+}
-+
-+check_common_commands "$@"
-+
-+[ -z "${XDG_UTILS_DEBUG_LEVEL}" ] && unset XDG_UTILS_DEBUG_LEVEL;
-+if [ ${XDG_UTILS_DEBUG_LEVEL-0} -lt 1 ]; then
-+    # Be silent
-+    xdg_redirect_output=" > /dev/null 2> /dev/null"
-+else
-+    # All output to stderr
-+    xdg_redirect_output=" >&2"
-+fi
-+
-+#--------------------------------------
-+# Checks for known desktop environments
-+# set variable DE to the desktop environments name, lowercase
-+
-+detectDE()
-+{
-+    # see https://bugs.freedesktop.org/show_bug.cgi?id=34164
-+    unset GREP_OPTIONS
-+
-+    if [ -n "${XDG_CURRENT_DESKTOP}" ]; then
-+      case "${XDG_CURRENT_DESKTOP}" in
-+         ENLIGHTENMENT)
-+           DE=enlightenment;
-+           ;;
-+         GNOME)
-+           DE=gnome;
-+           ;;
-+         KDE)
-+           DE=kde;
-+           ;;
-+         LXDE)
-+           DE=lxde;
-+           ;;
-+         MATE)
-+           DE=mate;
-+           ;;
-+         XFCE)
-+           DE=xfce
-+           ;;
-+      esac
-+    fi
-+
-+    if [ x"$DE" = x"" ]; then
-+      # classic fallbacks
-+      if [ x"$KDE_FULL_SESSION" != x"" ]; then DE=kde;
-+      elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then DE=gnome;
-+      elif [ x"$MATE_DESKTOP_SESSION_ID" != x"" ]; then DE=mate;
-+      elif `dbus-send --print-reply --dest=org.freedesktop.DBus /org/freedesktop/DBus org.freedesktop.DBus.GetNameOwner string:org.gnome.SessionManager > /dev/null 2>&1` ; then DE=gnome;
-+      elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
-+      elif xprop -root 2> /dev/null | grep -i '^xfce_desktop_window' >/dev/null 2>&1; then DE=xfce
-+      elif echo $DESKTOP | grep -q '^Enlightenment'; then DE=enlightenment;
-+      fi
-+    fi
-+
-+    if [ x"$DE" = x"" ]; then
-+      # fallback to checking $DESKTOP_SESSION
-+      case "$DESKTOP_SESSION" in
-+         gnome)
-+           DE=gnome;
-+           ;;
-+         LXDE|Lubuntu)
-+           DE=lxde; 
-+           ;;
-+         MATE)
-+           DE=mate;
-+           ;;
-+         xfce|xfce4|'Xfce Session')
-+           DE=xfce;
-+           ;;
-+      esac
-+    fi
-+
-+    if [ x"$DE" = x"" ]; then
-+      # fallback to uname output for other platforms
-+      case "$(uname 2>/dev/null)" in 
-+        Darwin)
-+          DE=darwin;
-+          ;;
-+      esac
-+    fi
-+
-+    if [ x"$DE" = x"gnome" ]; then
-+      # gnome-default-applications-properties is only available in GNOME 2.x
-+      # but not in GNOME 3.x
-+      which gnome-default-applications-properties > /dev/null 2>&1  || DE="gnome3"
-+    fi
-+}
-+
-+#----------------------------------------------------------------------------
-+# kfmclient exec/openURL can give bogus exit value in KDE <= 3.5.4
-+# It also always returns 1 in KDE 3.4 and earlier
-+# Simply return 0 in such case
-+
-+kfmclient_fix_exit_code()
-+{
-+    version=`LC_ALL=C.UTF-8 kde-config --version 2>/dev/null | grep '^KDE'`
-+    major=`echo $version | sed 's/KDE.*: \([0-9]\).*/\1/'`
-+    minor=`echo $version | sed 's/KDE.*: [0-9]*\.\([0-9]\).*/\1/'`
-+    release=`echo $version | sed 's/KDE.*: [0-9]*\.[0-9]*\.\([0-9]\).*/\1/'`
-+    test "$major" -gt 3 && return $1
-+    test "$minor" -gt 5 && return $1
-+    test "$release" -gt 4 && return $1
-+    return 0
-+}
-+
-+terminal_kde()
-+{
-+    terminal=`kreadconfig --file kdeglobals --group General --key TerminalApplication --default konsole`
-+
-+    terminal_exec=`which $terminal 2>/dev/null`
-+
-+    if [ -x "$terminal_exec" ]; then
-+        if [ x"$1" = x"" ]; then
-+            $terminal_exec
-+        else
-+            $terminal_exec -e "$1"
-+        fi
-+
-+        if [ $? -eq 0 ]; then
-+            exit_success
-+        else
-+            exit_failure_operation_failed
-+        fi
-+    else
-+        exit_failure_operation_impossible "configured terminal program '$terminal' not found or not executable"
-+    fi
-+}
-+
-+terminal_gnome()
-+{
-+    term_exec_key="/desktop/gnome/applications/terminal/exec"
-+    term_exec_arg_key="/desktop/gnome/applications/terminal/exec_arg"
-+
-+    term_exec=`gconftool-2 --get ${term_exec_key}`
-+    term_exec_arg=`gconftool-2 --get ${term_exec_arg_key}`
-+
-+    terminal_exec=`which $term_exec 2>/dev/null`
-+
-+    if [ -x "$terminal_exec" ]; then
-+        if [ x"$1" = x"" ]; then
-+            $terminal_exec
-+        else
-+            if [ x"$term_exec_arg" = x"" ]; then
-+                $terminal_exec "$1"
-+            else
-+                $terminal_exec "$term_exec_arg" "$1"
-+            fi
-+        fi
-+
-+        if [ $? -eq 0 ]; then
-+            exit_success
-+        else
-+            exit_failure_operation_failed
-+        fi
-+    else
-+        exit_failure_operation_impossible "configured terminal program '$term_exec' not found or not executable"
-+    fi
-+}
-+
-+terminal_xfce()
-+{
-+    if [ x"$1" = x"" ]; then
-+        exo-open --launch TerminalEmulator
-+    else
-+        exo-open --launch TerminalEmulator "$1"
-+    fi
-+
-+    if [ $? -eq 0 ]; then
-+        exit_success
-+    else
-+        exit_failure_operation_failed
-+    fi
-+}
-+
-+terminal_generic()
-+{
-+    # if $TERM is a known non-command, use hard-coded fallbacks
-+    if [ x"$TERM" = x"" ] || [ x"$TERM" = x"linux" ] || [ x"$TERM" = x"vt100" ]; then
-+        TERM=xterm
-+    fi
-+
-+    terminal_exec=`which $TERM 2>/dev/null`
-+
-+    if [ -x "$terminal_exec" ]; then
-+        if [ x"$1" = x"" ]; then
-+            $terminal_exec
-+        else
-+            # screen and urxvt won't do their own parsing of quoted arguments
-+            if [ x"$TERM" = x"screen" ]; then
-+                # screen has an incompatible meaning for -e
-+                sh -c "exec $terminal_exec $1"
-+            elif [ x"$TERM" = x"urxvt" ] || [ x"$TERM" = x"rxvt-unicode" ] || [ x"$TERM" = x"rxvt" ]; then
-+                #TODO: Use whatever mechanism dash supports to test for
-+                #      rxvt-* to match things like rxvt-unicode-256color
-+                sh -c "exec $terminal_exec -e $1"
-+            else
-+                $terminal_exec -e "$1"
-+            fi
-+        fi
-+
-+        if [ $? -eq 0 ]; then
-+            exit_success
-+        else
-+            exit_failure_operation_failed
-+        fi
-+    else
-+        exit_failure_operation_impossible "configured terminal program '$TERM' not found or not executable"
-+    fi
-+}
-+
-+terminal_lxde()
-+{
-+    if which lxterminal &>/dev/null; then
-+        if [ x"$1" = x"" ]; then
-+            lxterminal
-+        else
-+            lxterminal -e "$1"
-+        fi
-+    else
-+        terminal_generic "$1"
-+    fi
-+}
-+
-+#[ x"$1" != x"" ] || exit_failure_syntax
-+
-+command=
-+while [ $# -gt 0 ] ; do
-+    parm="$1"
-+    shift
-+
-+    case "$parm" in
-+      -*)
-+        exit_failure_syntax "unexpected option '$parm'"
-+        ;;
-+
-+      *)
-+        if [ -n "$command" ] ; then
-+            exit_failure_syntax "unexpected argument '$parm'"
-+        fi
-+        command="$parm"
-+        ;;
-+    esac
-+done
-+
-+detectDE
-+
-+if [ x"$DE" = x"" ]; then
-+    DE=generic
-+fi
-+
-+case "$DE" in
-+    kde)
-+    terminal_kde "$command"
-+    ;;
-+
-+    gnome*)
-+    terminal_gnome "$command"
-+    ;;
-+
-+    xfce)
-+    terminal_xfce "$command"
-+    ;;
-+
-+    lxde)
-+    terminal_lxde "$command"
-+    ;;
-+
-+    generic)
-+    terminal_generic "$command"
-+    ;;
-+
-+    *)
-+    exit_failure_operation_impossible "no terminal emulator available"
-+    ;;
-+esac
 -- 
-1.9.0
+2.1.4
 

similarity index 82%
rename from meta/recipes-extended/xdg-utils/xdg-utils_1.1.0-rc1.bb
rename to meta/recipes-extended/xdg-utils/xdg-utils_1.1.1.bb
index 46f1e3c..677f0a6 100644
@@ -21,12 +21,13 @@ SRC_URI = "http://portland.freedesktop.org/download/${BPN}-${PV}.tar.gz \
            file://0001-Reinstate-xdg-terminal.patch \
           "
 
-SRC_URI[md5sum] = "fadf5e7a08e0526fc60dbe3e5b7ef8d6"
-SRC_URI[sha256sum] = "7b05558ae4bb8ede356863cae8c42e3e012aa421bf9d45130a570fd209d79102"
+SRC_URI[md5sum] = "2d0aec6037769a5f138ff404b1bb4b15"
+SRC_URI[sha256sum] = "b0dd63a2576e0bb16f1aa78d6ddf7d6784784a098d4df17161cd6a17c7bc4125"
 
 inherit autotools-brokensep distro_features_check
 
 # The xprop requires x11 in DISTRO_FEATURES
 REQUIRED_DISTRO_FEATURES = "x11"
 
+DEPENDS = "xmlto-native libxslt-native"
 RDEPENDS_${PN} += "xprop"

similarity index 43%
rename from meta/recipes-support/shared-mime-info/shared-mime-info_1.4.bb
rename to meta/recipes-support/shared-mime-info/shared-mime-info_1.5.bb
index 8c4fde8..c659a3a 100644
@@ -3,5 +3,5 @@ require shared-mime-info.inc
 SRC_URI += "file://parallelmake.patch \
 	    file://install-data-hook.patch"
 
-SRC_URI[md5sum] = "16c02f7b658fff2a9c207406d388ea31"
-SRC_URI[sha256sum] = "bbc0bd023f497dfd75e1ca73441cbbb5a63617d9e14f2790b868361cc055b5b1"
+SRC_URI[md5sum] = "cc3e78d8bceaf2b361f62d67a8b4dda4"
+SRC_URI[sha256sum] = "d6412840eb265bf36e61fd7b6fc6bea21b0f58cb22bed16f2ccccdd54bea4180"

similarity index 81%
rename from meta/recipes-support/libcroco/libcroco_0.6.8.bb
rename to meta/recipes-support/libcroco/libcroco_0.6.9.bb
index 2b1b910..05bd931 100644
@@ -17,5 +17,5 @@ BINCONFIG = "${bindir}/croco-0.6-config"
 
 inherit autotools pkgconfig gnomebase gtk-doc binconfig-disabled
 
-SRC_URI[archive.md5sum] = "767e73c4174f75b99695d4530fd9bb80"
-SRC_URI[archive.sha256sum] = "ea6e1b858c55219cefd7109756bff5bc1a774ba7a55f7d3ccd734d6b871b8570"
+SRC_URI[archive.md5sum] = "f1863da805c9206563da06f56da1ea55"
+SRC_URI[archive.sha256sum] = "38b9a6aed1813e55b3ca07a68d1af845ad4d1f984602e9272fe692930c0be0ae"

deleted file mode 100644
index 1b749d7..0000000
@@ -1,4 +0,0 @@
-require dropbear.inc
-
-SRC_URI[md5sum] = "7664ac10f7cc2301c530eb80c756fc5d"
-SRC_URI[sha256sum] = "55ea7c1e904ffe4b1cdbe1addca8291a2533d7d285fd22ac33608e9502a62446"

new file mode 100644
index 0000000..3da8d5f
@@ -0,0 +1,5 @@
+require dropbear.inc
+
+SRC_URI[md5sum] = "0b0a1d9be6a094710d884209562a626c"
+SRC_URI[sha256sum] = "62a8cc3df1d0f136d46f50d4f8d92f7ab7ce1addac76b25446b3f6aaf80bf257"
+

index c408c57..539cb12 100644
@@ -1,28 +1,36 @@
-Subject: [PATCH 5/6] dropbear enable pam
+From b8cece92ba19aa77ac013ea161bfe4c7147747c9 Mon Sep 17 00:00:00 2001
+From: Jussi Kukkonen <[email protected]>
+Date: Wed, 2 Dec 2015 11:36:02 +0200
+Subject: Enable pam
 
-dropbear: We need modify file option.h besides enabling pam in \
+We need modify file option.h besides enabling pam in
 configure if we want dropbear to support pam.
 
 Upstream-Status: Pending
 
 Signed-off-by: Xiaofeng Yan <[email protected]>
+Signed-off-by: Jussi Kukkonen <[email protected]>
 ---
  options.h | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
 
-Index: dropbear-2013.62/options.h
-===================================================================
---- dropbear-2013.62.orig/options.h	2014-01-14 21:53:02.803262009 +0000
-+++ dropbear-2013.62/options.h	2014-01-14 21:53:56.119263462 +0000
-@@ -192,9 +192,9 @@
-  * PAM challenge/response.
-  * You can't enable both PASSWORD and PAM. */
+diff --git a/options.h b/options.h
+index 94261f6..90bfe2f 100644
+--- a/options.h
++++ b/options.h
+@@ -208,10 +208,10 @@ If you test it please contact the Dropbear author */
  
+ /* This requires crypt() */
+ #ifdef HAVE_CRYPT
 -#define ENABLE_SVR_PASSWORD_AUTH
 +/*#define ENABLE_SVR_PASSWORD_AUTH*/
+ #endif
  /* PAM requires ./configure --enable-pam */
 -/*#define ENABLE_SVR_PAM_AUTH */
 +#define ENABLE_SVR_PAM_AUTH
  #define ENABLE_SVR_PUBKEY_AUTH
  
  /* Whether to take public key options in 
+-- 
+2.1.4
+

deleted file mode 100644
index 1b749d7..0000000
@@ -1,4 +0,0 @@
-require dropbear.inc
-
-SRC_URI[md5sum] = "7664ac10f7cc2301c530eb80c756fc5d"
-SRC_URI[sha256sum] = "55ea7c1e904ffe4b1cdbe1addca8291a2533d7d285fd22ac33608e9502a62446"

new file mode 100644
index 0000000..3da8d5f
@@ -0,0 +1,5 @@
+require dropbear.inc
+
+SRC_URI[md5sum] = "0b0a1d9be6a094710d884209562a626c"
+SRC_URI[sha256sum] = "62a8cc3df1d0f136d46f50d4f8d92f7ab7ce1addac76b25446b3f6aaf80bf257"
+