remove auto exit of production and added sysfs interface

Changed "exit production mode" from automatic exiting to manually using the sysfs interface.

If the driver exit the production mode automatically, the board will not start anymore if the bootloader does not already have the "BIOS life sign" feature.

This patch remove the auto mechanism and add a sysfs interface to manually exiting the production e.g. during the EOL test of the board.

Signed-off-by Andreas Werner <[email protected]>

---
 drivers/mfd/menf21bmc.c | 65 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 21 deletions(-)

drivers/mfd/menf21bmc.c +44 -21

index 1c27434..742ffe7 100644
@@ -27,31 +27,57 @@ static struct mfd_cell menf21bmc_cell[] = {
 	{ .name = "menf21bmc_hwmon", }
 };
 
-static int menf21bmc_wdt_exit_prod_mode(struct i2c_client *client)
+static ssize_t menf21bmc_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
-	int val, ret;
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
 
 	val = i2c_smbus_read_byte_data(client, BMC_CMD_WDT_PROD_STAT);
 	if (val < 0)
 		return val;
 
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_mode_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long mode_val;
+	int ret;
+
+	if (kstrtoul(buf, 0, &mode_val))
+		return -EINVAL;
+
 	/*
-	 * Production mode should be not active after delivery of the Board.
-	 * To be sure we check it, inform the user and exit the mode
-	 * if active.
+	 * We cannot set the production mode (0).
+	 * This is the default mode. If exited once,
+	 * it cannot be set anymore.
 	 */
-	if (val == 0x00) {
-		dev_info(&client->dev,
-			"BMC in production mode. Exit production mode\n");
+	if (!mode_val)
+		return -EINVAL;
 
-		ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD);
-		if (ret < 0)
-			return ret;
-	}
+	ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD);
+	if (ret < 0)
+		return ret;
 
-	return 0;
+	return size;
 }
 
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, menf21bmc_mode_show,
+		   menf21bmc_mode_store);
+
+static struct attribute *menf21bmc_attributes[] = {
+	&dev_attr_mode.attr,
+	NULL
+};
+
+static const struct attribute_group menf21bmc_attr_group = {
+	.attrs = menf21bmc_attributes,
+};
+
 static int
 menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 {

@@ -86,20 +112,15 @@ menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 	dev_info(&client->dev, "FW Revision: %02d.%02d.%02d\n",
 		 rev_major, rev_minor, rev_main);
 
-	/*
-	 * We have to exit the Production Mode of the BMC to activate the
-	 * Watchdog functionality and the BIOS life sign monitoring.
-	 */
-	ret = menf21bmc_wdt_exit_prod_mode(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed to leave production mode\n");
+	ret = sysfs_create_group(&client->dev.kobj, &menf21bmc_attr_group);
+	if (ret)
 		return ret;
-	}
 
 	ret = mfd_add_devices(&client->dev, 0, menf21bmc_cell,
 			      ARRAY_SIZE(menf21bmc_cell), NULL, 0, NULL);
 	if (ret < 0) {
 		dev_err(&client->dev, "failed to add BMC sub-devices\n");
+		sysfs_remove_group(&client->dev.kobj, &menf21bmc_attr_group);
 		return ret;
 	}
 

@@ -108,7 +129,9 @@ menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 
 static int menf21bmc_remove(struct i2c_client *client)
 {
+	sysfs_remove_group(&client->dev.kobj, &menf21bmc_attr_group);
 	mfd_remove_devices(&client->dev);
+
 	return 0;
 }
 

Quoted 7 lines · Andreas Werner

Changed "exit production mode" from automatic exiting to manually using the sysfs interface.

If the driver exit the production mode automatically, the board will not start anymore if the bootloader does not already have the "BIOS life sign" feature.

Quoted 7 lines

This patch remove the auto mechanism and add a sysfs interface to manually exiting the production e.g. during the EOL test of the board.

Signed-off-by Andreas Werner <[email protected]>

---
 drivers/mfd/menf21bmc.c | 65 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 21 deletions(-)

Acked-by Lee Jones <[email protected]>

Quoted 109 lines

drivers/mfd/menf21bmc.c +44 -21

index 1c27434..742ffe7 100644
@@ -27,31 +27,57 @@ static struct mfd_cell menf21bmc_cell[] = {
 	{ .name = "menf21bmc_hwmon", }
 };
 
-static int menf21bmc_wdt_exit_prod_mode(struct i2c_client *client)
+static ssize_t menf21bmc_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
-	int val, ret;
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
 
 	val = i2c_smbus_read_byte_data(client, BMC_CMD_WDT_PROD_STAT);
 	if (val < 0)
 		return val;
 
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_mode_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t size)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long mode_val;
+	int ret;
+
+	if (kstrtoul(buf, 0, &mode_val))
+		return -EINVAL;
+
 	/*
-	 * Production mode should be not active after delivery of the Board.
-	 * To be sure we check it, inform the user and exit the mode
-	 * if active.
+	 * We cannot set the production mode (0).
+	 * This is the default mode. If exited once,
+	 * it cannot be set anymore.
 	 */
-	if (val == 0x00) {
-		dev_info(&client->dev,
-			"BMC in production mode. Exit production mode\n");
+	if (!mode_val)
+		return -EINVAL;
 
-		ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD);
-		if (ret < 0)
-			return ret;
-	}
+	ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD);
+	if (ret < 0)
+		return ret;
 
-	return 0;
+	return size;
 }
 
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, menf21bmc_mode_show,
+		   menf21bmc_mode_store);
+
+static struct attribute *menf21bmc_attributes[] = {
+	&dev_attr_mode.attr,
+	NULL
+};
+
+static const struct attribute_group menf21bmc_attr_group = {
+	.attrs = menf21bmc_attributes,
+};
+
 static int
 menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 {

@@ -86,20 +112,15 @@ menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 	dev_info(&client->dev, "FW Revision: %02d.%02d.%02d\n",
 		 rev_major, rev_minor, rev_main);
 
-	/*
-	 * We have to exit the Production Mode of the BMC to activate the
-	 * Watchdog functionality and the BIOS life sign monitoring.
-	 */
-	ret = menf21bmc_wdt_exit_prod_mode(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed to leave production mode\n");
+	ret = sysfs_create_group(&client->dev.kobj, &menf21bmc_attr_group);
+	if (ret)
 		return ret;
-	}
 
 	ret = mfd_add_devices(&client->dev, 0, menf21bmc_cell,
 			      ARRAY_SIZE(menf21bmc_cell), NULL, 0, NULL);
 	if (ret < 0) {
 		dev_err(&client->dev, "failed to add BMC sub-devices\n");
+		sysfs_remove_group(&client->dev.kobj, &menf21bmc_attr_group);
 		return ret;
 	}
 

@@ -108,7 +129,9 @@ menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
 
 static int menf21bmc_remove(struct i2c_client *client)
 {
+	sysfs_remove_group(&client->dev.kobj, &menf21bmc_attr_group);
 	mfd_remove_devices(&client->dev);
+
 	return 0;
 }
 

When you re-submit this set, with the correct Maintainers CC'ed, please also update the patch subject lines, so they match the format of the subsystem.

Quoted 3 lines · Lee Jones

When you re-submit this set, with the correct Maintainers CC'ed, please also update the patch subject lines, so they match the format of the subsystem.

Just to be sure, do you mean I should update the following.

mfd/menf21bmc: -> mfd: menf21bmc:

Or do you mean I should update the subject lines of the ABI patches?

Regards
Andy

Quoted 1 line

...

This patch add the description of the "mode" sysfs interface for the menf21bmc MFD driver.

Signed-off-by Andreas Werner <[email protected]>

---
 Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc | 14 ++++++++++++++

 1 file changed, 14 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc

Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc new file +14 -0

new file mode 100644
index 0000000..28d1fa2
@@ -0,0 +1,14 @@
+What:		/sys/bus/i2c/devices/.../mode
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Set and get the mode of the device.
+		The production mode cannot be set again if the device
+		is set to active once.
+
+		In production mode the BMC does not wait for BIOS life sign,
+		did not reset the CPU board on Watchdog timeout and allow the
+		programming of the HW Variant.
+
+		0 = production mode
+		1 = active mode

Quoted 6 lines · Andreas Werner

This patch add the description of the "mode" sysfs interface for the menf21bmc MFD driver.

Signed-off-by Andreas Werner <[email protected]>

---
 Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc | 14 ++++++++++++++

These look like I2C changes, so you need to CC the I2C Maintainer.

Quoted 24 lines

 1 file changed, 14 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc

Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc new file +14 -0

new file mode 100644
index 0000000..28d1fa2
@@ -0,0 +1,14 @@
+What:		/sys/bus/i2c/devices/.../mode
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Set and get the mode of the device.
+		The production mode cannot be set again if the device
+		is set to active once.
+
+		In production mode the BMC does not wait for BIOS life sign,
+		did not reset the CPU board on Watchdog timeout and allow the
+		programming of the HW Variant.
+
+		0 = production mode
+		1 = active mode

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

This patch adds additional sysfs entries to provide status information to the userland.

The following informations are now provided:
- Get operation hours counter
- Get board slot address
- Get powercycle counter
- Set/get Hw Variant

Signed-off-by Andreas Werner <[email protected]>

---
 drivers/mfd/menf21bmc.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 96 insertions(+), 3 deletions(-)

drivers/mfd/menf21bmc.c +4 -0

index 742ffe7..dd068c0 100644
@@ -20,6 +20,10 @@
 #define BMC_CMD_REV_MAJOR	0x80
 #define BMC_CMD_REV_MINOR	0x81
 #define BMC_CMD_REV_MAIN	0x82
+#define BMC_CMD_SLOT_ADDRESS	0x8c
+#define BMC_CMD_HW_VARIANT	0x8f
+#define BMC_CMD_PWRCYCL_CNT	0x93
+#define BMC_CMD_OP_HRS_CNT	0x94
 
 static struct mfd_cell menf21bmc_cell[] = {
 	{ .name = "menf21bmc_wdt", },

drivers/mfd/menf21bmc.c +89 -0

 {
 	struct i2c_client *client = to_i2c_client(dev);
 	unsigned long mode_val;

@@ -66,11 +70,100 @@ static ssize_t menf21bmc_mode_store(struct device *dev,
 	return size;
 }
 
+static ssize_t menf21bmc_hw_variant_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_HW_VARIANT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "0x%04x\n", val);
+
+}
+
+static ssize_t menf21bmc_hw_variant_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t size)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long hw_variant;
+	int ret;
+
+	if (kstrtoul(buf, 0, &hw_variant))
+		return -EINVAL;
+
+	if (hw_variant < 0 || hw_variant > 0xffff)
+		return -EINVAL;
+
+	ret = i2c_smbus_write_word_data(client, BMC_CMD_HW_VARIANT,
+					hw_variant);
+	if (ret < 0)
+		return ret;
+
+	return size;
+
+}
+
+static ssize_t menf21bmc_pwrcycl_cnt_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_PWRCYCL_CNT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_op_hrs_cnt_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_OP_HRS_CNT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_slot_address_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, BMC_CMD_SLOT_ADDRESS);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
 static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, menf21bmc_mode_show,
 		   menf21bmc_mode_store);
+static DEVICE_ATTR(hw_variant, S_IRUGO | S_IWUSR, menf21bmc_hw_variant_show,
+		   menf21bmc_hw_variant_store);
+static DEVICE_ATTR(pwrcycl_cnt, S_IRUGO, menf21bmc_pwrcycl_cnt_show, NULL);
+static DEVICE_ATTR(op_hrs_cnt, S_IRUGO, menf21bmc_op_hrs_cnt_show, NULL);
+static DEVICE_ATTR(slot_address, S_IRUGO, menf21bmc_slot_address_show, NULL);
 
 static struct attribute *menf21bmc_attributes[] = {
 	&dev_attr_mode.attr,
+	&dev_attr_hw_variant.attr,
+	&dev_attr_pwrcycl_cnt.attr,
+	&dev_attr_op_hrs_cnt.attr,
+	&dev_attr_slot_address.attr,
 	NULL
 };
 

Quoted 32 lines · Andreas Werner

This patch adds additional sysfs entries to provide status information to the userland.

The following informations are now provided:
- Get operation hours counter
- Get board slot address
- Get powercycle counter
- Set/get Hw Variant

Signed-off-by Andreas Werner <[email protected]>

---
 drivers/mfd/menf21bmc.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 96 insertions(+), 3 deletions(-)

drivers/mfd/menf21bmc.c +4 -0

index 742ffe7..dd068c0 100644
@@ -20,6 +20,10 @@
 #define BMC_CMD_REV_MAJOR	0x80
 #define BMC_CMD_REV_MINOR	0x81
 #define BMC_CMD_REV_MAIN	0x82
+#define BMC_CMD_SLOT_ADDRESS	0x8c
+#define BMC_CMD_HW_VARIANT	0x8f
+#define BMC_CMD_PWRCYCL_CNT	0x93
+#define BMC_CMD_OP_HRS_CNT	0x94
 
 static struct mfd_cell menf21bmc_cell[] = {
 	{ .name = "menf21bmc_wdt", },

@@ -28,7 +32,7 @@ static struct mfd_cell menf21bmc_cell[] = {
 };
 

drivers/mfd/menf21bmc.c static struct mfd_cell menf21bmc_cell[] = { · line 35

Quoted 3 lines

drivers/mfd/menf21bmc.c +1 -1

 static ssize_t menf21bmc_mode_show(struct device *dev,
-				  struct device_attribute *attr, char *buf)
+				   struct device_attribute *attr, char *buf)

This is an irrelevant change. Please split it out.

drivers/mfd/menf21bmc.c static ssize_t menf21bmc_mode_show(struct device *dev, · line 49

Quoted 12 lines

drivers/mfd/menf21bmc.c +2 -2

 {
 	struct i2c_client *client = to_i2c_client(dev);
 	int val;

@@ -41,8 +45,8 @@ static ssize_t menf21bmc_mode_show(struct device *dev,
 }
 
 static ssize_t menf21bmc_mode_store(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t size)
+				    struct device_attribute *attr,
+				    const char *buf, size_t size)

This is an irrelevant change. Please split it out.

Quoted 104 lines

drivers/mfd/menf21bmc.c +89 -0

 {
 	struct i2c_client *client = to_i2c_client(dev);
 	unsigned long mode_val;

@@ -66,11 +70,100 @@ static ssize_t menf21bmc_mode_store(struct device *dev,
 	return size;
 }
 
+static ssize_t menf21bmc_hw_variant_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_HW_VARIANT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "0x%04x\n", val);
+
+}
+
+static ssize_t menf21bmc_hw_variant_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t size)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long hw_variant;
+	int ret;
+
+	if (kstrtoul(buf, 0, &hw_variant))
+		return -EINVAL;
+
+	if (hw_variant < 0 || hw_variant > 0xffff)
+		return -EINVAL;
+
+	ret = i2c_smbus_write_word_data(client, BMC_CMD_HW_VARIANT,
+					hw_variant);
+	if (ret < 0)
+		return ret;
+
+	return size;
+
+}
+
+static ssize_t menf21bmc_pwrcycl_cnt_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_PWRCYCL_CNT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_op_hrs_cnt_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_word_data(client, BMC_CMD_OP_HRS_CNT);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t menf21bmc_slot_address_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, BMC_CMD_SLOT_ADDRESS);
+	if (val < 0)
+		return val;
+
+	return sprintf(buf, "%d\n", val);
+}
+
 static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, menf21bmc_mode_show,
 		   menf21bmc_mode_store);
+static DEVICE_ATTR(hw_variant, S_IRUGO | S_IWUSR, menf21bmc_hw_variant_show,
+		   menf21bmc_hw_variant_store);
+static DEVICE_ATTR(pwrcycl_cnt, S_IRUGO, menf21bmc_pwrcycl_cnt_show, NULL);
+static DEVICE_ATTR(op_hrs_cnt, S_IRUGO, menf21bmc_op_hrs_cnt_show, NULL);
+static DEVICE_ATTR(slot_address, S_IRUGO, menf21bmc_slot_address_show, NULL);
 
 static struct attribute *menf21bmc_attributes[] = {
 	&dev_attr_mode.attr,
+	&dev_attr_hw_variant.attr,
+	&dev_attr_pwrcycl_cnt.attr,
+	&dev_attr_op_hrs_cnt.attr,
+	&dev_attr_slot_address.attr,
 	NULL
 };
 

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Signed-off-by Andreas Werner <[email protected]>

---
 .../ABI/testing/sysfs-bus-i2c-devices-menf21bmc    | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc +26 -0

index 28d1fa2..6defdd3 100644
@@ -12,3 +12,29 @@ Description:	Set and get the mode of the device.
 
 		0 = production mode
 		1 = active mode
+
+What:		/sys/bus/i2c/devices/.../hw_variant
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Set and get the hardware variant ID.
+
+What:		/sys/bus/i2c/devices/.../pwrcycl_cnt
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the BMC powercycle counter.
+
+What:		/sys/bus/i2c/devices/.../op_hrs_cnt
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the operation hours counter
+
+What:		/sys/bus/i2c/devices/.../slot_address
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the slot address of the board.
+		Slot address is the geographical address
+		in a CPCI rack/backplane.

Quoted 4 lines · Andreas Werner

Signed-off-by Andreas Werner <[email protected]>

---
 .../ABI/testing/sysfs-bus-i2c-devices-menf21bmc    | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

These look like I2C changes, so you need to CC the I2C Maintainer.

Quoted 35 lines

Documentation/ABI/testing/sysfs-bus-i2c-devices-menf21bmc +26 -0

index 28d1fa2..6defdd3 100644
@@ -12,3 +12,29 @@ Description:	Set and get the mode of the device.
 
 		0 = production mode
 		1 = active mode
+
+What:		/sys/bus/i2c/devices/.../hw_variant
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Set and get the hardware variant ID.
+
+What:		/sys/bus/i2c/devices/.../pwrcycl_cnt
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the BMC powercycle counter.
+
+What:		/sys/bus/i2c/devices/.../op_hrs_cnt
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the operation hours counter
+
+What:		/sys/bus/i2c/devices/.../slot_address
+Date:		December 2015
+KernelVersion:	4.4
+Contact:	Andreas Werner <[email protected]>
+Description:	Read the slot address of the board.
+		Slot address is the geographical address
+		in a CPCI rack/backplane.

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog