Skip to contentSkip to conversation

staging: wilc1000: remove code for unused HOST_IF_MSG's

PATCH Superseded Alison Schofield 2 participants 14 messages Feb 26, 2016 Staging

lore
Share & tools
lore

Alison Schofield

author
#0 lore raw

cover staging: wilc1000: remove code for unused HOST_IF_MSG's

The functions that sent these messages were previously removed. Finish the cleanup by removing the calls to the message handlers, the message handlers, the #define's, and unused variables.

Alison Schofield (6):
staging: wilc1000: remove code for HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS
staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS
staging: wilc1000: remove code for HOST_IF_MSG_GET_CHNL
staging: wilc1000: remove code for HOST_IF_GET_LINKSPEED
staging: wilc1000: remove code for HOST_IF_MSG_FLUSH_CONNECT
staging: wilc1000: remove code for HOST_IF_MSG_Q_IDLE

 drivers/staging/wilc1000/host_interface.c | 182 ------------------------------
 1 file changed, 182 deletions(-)
Signature · 1 line
2.1.4
author
#1 lore raw

PATCH 1/6 staging: wilc1000: remove code for HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 36 -------------------------------
 1 file changed, 36 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -36
index 0c09df4..d004817 100644
@@ -46,7 +46,6 @@
 #define HOST_IF_MSG_DEL_BA_SESSION              34
 #define HOST_IF_MSG_Q_IDLE                      35
 #define HOST_IF_MSG_DEL_ALL_STA                 36
-#define HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS      37
 #define HOST_IF_MSG_SET_TX_POWER		38
 #define HOST_IF_MSG_GET_TX_POWER		39
 #define HOST_IF_MSG_EXIT                        100

@@ -2583,37 +2582,6 @@ ERRORHANDLER:
 	kfree(wid.val);
 }
 
-static s32 Handle_DelAllRxBASessions(struct wilc_vif *vif,
-				     struct ba_session_info *strHostIfBASessionInfo)
-{
-	s32 result = 0;
-	struct wid wid;
-	char *ptr = NULL;
-
-	wid.id = (u16)WID_DEL_ALL_RX_BA;
-	wid.type = WID_STR;
-	wid.val = kmalloc(BLOCK_ACK_REQ_SIZE, GFP_KERNEL);
-	wid.size = BLOCK_ACK_REQ_SIZE;
-	ptr = wid.val;
-	*ptr++ = 0x14;
-	*ptr++ = 0x3;
-	*ptr++ = 0x2;
-	memcpy(ptr, strHostIfBASessionInfo->bssid, ETH_ALEN);
-	ptr += ETH_ALEN;
-	*ptr++ = strHostIfBASessionInfo->tid;
-	*ptr++ = 0;
-	*ptr++ = 32;
-
-	result = wilc_send_config_pkt(vif, SET_CFG, &wid, 1,
-				      wilc_get_vif_idx(vif));
-
-	kfree(wid.val);
-
-	up(&hif_sema_wait_response);
-
-	return result;
-}
-
 static void handle_set_tx_pwr(struct wilc_vif *vif, u8 tx_pwr)
 {
 	int ret;

@@ -2831,10 +2799,6 @@ static int hostIFthread(void *pvArg)
 			Handle_SetMulticastFilter(msg.vif, &msg.body.multicast_info);
 			break;
 
-		case HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS:
-			Handle_DelAllRxBASessions(msg.vif, &msg.body.session_info);
-			break;
-
 		case HOST_IF_MSG_DEL_ALL_STA:
 			Handle_DelAllSta(msg.vif, &msg.body.del_all_sta_info);
 			break;
Signature · 1 line
2.1.4
author
#2 lore raw

PATCH 2/6 staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 29 -----------------------------
 1 file changed, 29 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -29
index d004817..4099982 100644
@@ -35,7 +35,6 @@
 #define HOST_IF_MSG_LISTEN_TIMER_FIRED          22
 #define HOST_IF_MSG_GET_LINKSPEED               23
 #define HOST_IF_MSG_SET_WFIDRV_HANDLER          24
-#define HOST_IF_MSG_SET_MAC_ADDRESS             25
 #define HOST_IF_MSG_GET_MAC_ADDRESS             26
 #define HOST_IF_MSG_SET_OPERATION_MODE          27
 #define HOST_IF_MSG_SET_IPADDRESS               28

@@ -423,29 +422,6 @@ static s32 handle_get_ip_address(struct wilc_vif *vif, u8 idx)
 	return result;
 }
 
-static void handle_set_mac_address(struct wilc_vif *vif,
-				   struct set_mac_addr *set_mac_addr)
-{
-	int ret = 0;
-	struct wid wid;
-
-	u8 *mac_buf = kmemdup(set_mac_addr->mac_addr, ETH_ALEN, GFP_KERNEL);
-	if (!mac_buf)
-		return;
-
-	wid.id = (u16)WID_MAC_ADDR;
-	wid.type = WID_STR;
-	wid.val = mac_buf;
-	wid.size = ETH_ALEN;
-
-	ret = wilc_send_config_pkt(vif, SET_CFG, &wid, 1,
-				   wilc_get_vif_idx(vif));
-	if (ret)
-		netdev_err(vif->ndev, "Failed to set mac address\n");
-
-	kfree(mac_buf);
-}
-
 static s32 handle_get_mac_address(struct wilc_vif *vif,
 				  struct get_mac_addr *get_mac_addr)
 {

@@ -2773,11 +2749,6 @@ static int hostIFthread(void *pvArg)
 			handle_get_ip_address(vif, msg.body.ip_info.idx);
 			break;
 
-		case HOST_IF_MSG_SET_MAC_ADDRESS:
-			handle_set_mac_address(msg.vif,
-					       &msg.body.set_mac_info);
-			break;
-
 		case HOST_IF_MSG_GET_MAC_ADDRESS:
 			handle_get_mac_address(msg.vif,
 					       &msg.body.get_mac_info);
Signature · 1 line
2.1.4
author
#4 lore raw

PATCH 3/6 staging: wilc1000: remove code for HOST_IF_MSG_GET_CHNL

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, the #define, and the channel var.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 27 ---------------------------
 1 file changed, 27 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -27
index 4099982..bdb3c7e 100644
@@ -20,7 +20,6 @@
 #define HOST_IF_MSG_SET_CHANNEL                 7
 #define HOST_IF_MSG_DISCONNECT                  8
 #define HOST_IF_MSG_GET_RSSI                    9
-#define HOST_IF_MSG_GET_CHNL                    10
 #define HOST_IF_MSG_ADD_BEACON                  11
 #define HOST_IF_MSG_DEL_BEACON                  12
 #define HOST_IF_MSG_ADD_STATION                 13

@@ -252,7 +251,6 @@ static bool scan_while_connected;
 
 static s8 rssi;
 static s8 link_speed;
-static u8 ch_no;
 static u8 set_ip[2][4];
 static u8 get_ip[2][4];
 static u32 inactive_time;

@@ -1930,27 +1928,6 @@ void wilc_resolve_disconnect_aberration(struct wilc_vif *vif)
 		wilc_disconnect(vif, 1);
 }
 
-static s32 Handle_GetChnl(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid wid;
-
-	wid.id = (u16)WID_CURRENT_CHANNEL;
-	wid.type = WID_CHAR;
-	wid.val = (s8 *)&ch_no;
-	wid.size = sizeof(char);
-
-	result = wilc_send_config_pkt(vif, GET_CFG, &wid, 1,
-				      wilc_get_vif_idx(vif));
-
-	if (result) {
-		netdev_err(vif->ndev, "Failed to get channel number\n");
-		result = -EFAULT;
-	}
-
-	return result;
-}
-
 static void Handle_GetRssi(struct wilc_vif *vif)
 {
 	s32 result = 0;

@@ -2689,10 +2666,6 @@ static int hostIFthread(void *pvArg)
 					     (struct rf_info *)msg.body.data);
 			break;
 
-		case HOST_IF_MSG_GET_CHNL:
-			Handle_GetChnl(msg.vif);
-			break;
-
 		case HOST_IF_MSG_ADD_BEACON:
 			Handle_AddBeacon(msg.vif, &msg.body.beacon_info);
 			break;
Signature · 1 line
2.1.4
author
#5 lore raw

PATCH 4/6 staging: wilc1000: remove code for HOST_IF_GET_LINKSPEED

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, the #define, and the link_speed var.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 27 ---------------------------
 1 file changed, 27 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -27
index bdb3c7e..a772fde 100644
@@ -32,7 +32,6 @@
 #define HOST_IF_MSG_REMAIN_ON_CHAN              20
 #define HOST_IF_MSG_REGISTER_FRAME              21
 #define HOST_IF_MSG_LISTEN_TIMER_FIRED          22
-#define HOST_IF_MSG_GET_LINKSPEED               23
 #define HOST_IF_MSG_SET_WFIDRV_HANDLER          24
 #define HOST_IF_MSG_GET_MAC_ADDRESS             26
 #define HOST_IF_MSG_SET_OPERATION_MODE          27

@@ -250,7 +249,6 @@ static u8 rcv_assoc_resp[MAX_ASSOC_RESP_FRAME_SIZE];
 static bool scan_while_connected;
 
 static s8 rssi;
-static s8 link_speed;
 static u8 set_ip[2][4];
 static u8 get_ip[2][4];
 static u32 inactive_time;

@@ -1948,27 +1946,6 @@ static void Handle_GetRssi(struct wilc_vif *vif)
 	up(&vif->hif_drv->sem_get_rssi);
 }
 
-static void Handle_GetLinkspeed(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid wid;
-
-	link_speed = 0;
-
-	wid.id = (u16)WID_LINKSPEED;
-	wid.type = WID_CHAR;
-	wid.val = &link_speed;
-	wid.size = sizeof(char);
-
-	result = wilc_send_config_pkt(vif, GET_CFG, &wid, 1,
-				      wilc_get_vif_idx(vif));
-	if (result) {
-		netdev_err(vif->ndev, "Failed to get LINKSPEED value\n");
-		result = -EFAULT;
-	}
-
-}
-
 static s32 Handle_GetStatistics(struct wilc_vif *vif,
 				struct rf_info *pstrStatistics)
 {

@@ -2657,10 +2634,6 @@ static int hostIFthread(void *pvArg)
 			Handle_GetRssi(msg.vif);
 			break;
 
-		case HOST_IF_MSG_GET_LINKSPEED:
-			Handle_GetLinkspeed(msg.vif);
-			break;
-
 		case HOST_IF_MSG_GET_STATISTICS:
 			Handle_GetStatistics(msg.vif,
 					     (struct rf_info *)msg.body.data);
Signature · 1 line
2.1.4
author
#6 lore raw

PATCH 5/6 staging: wilc1000: remove code for HOST_IF_MSG_FLUSH_CONNECT

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 52 -------------------------------
 1 file changed, 52 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -52
index a772fde..6c0e7e1 100644
@@ -37,7 +37,6 @@
 #define HOST_IF_MSG_SET_OPERATION_MODE          27
 #define HOST_IF_MSG_SET_IPADDRESS               28
 #define HOST_IF_MSG_GET_IPADDRESS               29
-#define HOST_IF_MSG_FLUSH_CONNECT               30
 #define HOST_IF_MSG_GET_STATISTICS              31
 #define HOST_IF_MSG_SET_MULTICAST_FILTER        32
 #define HOST_IF_MSG_DEL_BA_SESSION              34

@@ -1165,53 +1164,6 @@ ERRORHANDLER:
 	return result;
 }
 
-static s32 Handle_FlushConnect(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid strWIDList[5];
-	u32 u32WidsCount = 0;
-	u8 *pu8CurrByte = NULL;
-
-	strWIDList[u32WidsCount].id = WID_INFO_ELEMENT_ASSOCIATE;
-	strWIDList[u32WidsCount].type = WID_BIN_DATA;
-	strWIDList[u32WidsCount].val = info_element;
-	strWIDList[u32WidsCount].size = info_element_size;
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_11I_MODE;
-	strWIDList[u32WidsCount].type = WID_CHAR;
-	strWIDList[u32WidsCount].size = sizeof(char);
-	strWIDList[u32WidsCount].val = (s8 *)(&(mode_11i));
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_AUTH_TYPE;
-	strWIDList[u32WidsCount].type = WID_CHAR;
-	strWIDList[u32WidsCount].size = sizeof(char);
-	strWIDList[u32WidsCount].val = (s8 *)(&auth_type);
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_JOIN_REQ_EXTENDED;
-	strWIDList[u32WidsCount].type = WID_STR;
-	strWIDList[u32WidsCount].size = join_req_size;
-	strWIDList[u32WidsCount].val = (s8 *)join_req;
-	pu8CurrByte = strWIDList[u32WidsCount].val;
-
-	pu8CurrByte += FLUSHED_BYTE_POS;
-	*(pu8CurrByte) = FLUSHED_JOIN_REQ;
-
-	u32WidsCount++;
-
-	result = wilc_send_config_pkt(vif, SET_CFG, strWIDList,
-				      u32WidsCount,
-				      wilc_get_vif_idx(join_req_vif));
-	if (result) {
-		netdev_err(vif->ndev, "failed to send config packet\n");
-		result = -EINVAL;
-	}
-
-	return result;
-}
-
 static s32 Handle_ConnectTimeout(struct wilc_vif *vif)
 {
 	s32 result = 0;

@@ -2587,10 +2539,6 @@ static int hostIFthread(void *pvArg)
 			Handle_Connect(msg.vif, &msg.body.con_info);
 			break;
 
-		case HOST_IF_MSG_FLUSH_CONNECT:
-			Handle_FlushConnect(msg.vif);
-			break;
-
 		case HOST_IF_MSG_RCVD_NTWRK_INFO:
 			Handle_RcvdNtwrkInfo(msg.vif, &msg.body.net_info);
 			break;
Signature · 1 line
2.1.4
author
#7 lore raw

PATCH 6/6 staging: wilc1000: remove code for HOST_IF_MSG_Q_IDLE

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 11 -----------
 1 file changed, 11 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -11
index 6c0e7e1..212e436 100644
@@ -40,7 +40,6 @@
 #define HOST_IF_MSG_GET_STATISTICS              31
 #define HOST_IF_MSG_SET_MULTICAST_FILTER        32
 #define HOST_IF_MSG_DEL_BA_SESSION              34
-#define HOST_IF_MSG_Q_IDLE                      35
 #define HOST_IF_MSG_DEL_ALL_STA                 36
 #define HOST_IF_MSG_SET_TX_POWER		38
 #define HOST_IF_MSG_GET_TX_POWER		39

@@ -733,12 +732,6 @@ ERRORHANDLER:
 	return result;
 }
 
-static void Handle_wait_msg_q_empty(void)
-{
-	wilc_initialized = 0;
-	up(&hif_sema_wait_response);
-}
-
 static s32 Handle_ScanDone(struct wilc_vif *vif,
 			   enum scan_event enuEvent);
 

@@ -2527,10 +2520,6 @@ static int hostIFthread(void *pvArg)
 		}
 
 		switch (msg.id) {
-		case HOST_IF_MSG_Q_IDLE:
-			Handle_wait_msg_q_empty();
-			break;
-
 		case HOST_IF_MSG_SCAN:
 			Handle_Scan(msg.vif, &msg.body.scan_info);
 			break;
Signature · 1 line
2.1.4
maintainer
#3 lore raw

Re: [Outreachy kernel] [PATCH 2/6] staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS

In reply to Alison Schofield
Quoted 8 lines · Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

Due to other changes in this file, this patch didn't apply, but I applied your first patch in this series. Can you rebase the rest of these patches against my staging-testing branch and resend them?

thanks,

greg k-h

author
#8 lore raw

v2 cover staging: wilc1000: remove code for unused HOST_IF_MSG's

In reply to Alison Schofield

The functions that sent these messages were previously removed. Finish the cleanup by removing the calls to the message handlers, the message handlers, the #define's, and unused variables.

Changes in v2:
5 Patches Rebased and Resending. (one made it through the first time)

Alison Schofield (5):
staging: wilc1000: remove code for HOST_IF_MSG_GET_CHNL
staging: wilc1000: remove code for HOST_IF_GET_LINKSPEED
staging: wilc1000: remove code for HOST_IF_MSG_FLUSH_CONNECT
staging: wilc1000: remove code for HOST_IF_MSG_Q_IDLE
staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS

 drivers/staging/wilc1000/host_interface.c | 147 ------------------------------
 1 file changed, 147 deletions(-)
Signature · 1 line
2.1.4
author
#9 lore raw

PATCH v2 1/5 staging: wilc1000: remove code for HOST_IF_MSG_GET_CHNL

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, the #define, and the channel var.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 27 ---------------------------
 1 file changed, 27 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -27
index b2fdc93..546161f 100644
@@ -20,7 +20,6 @@
 #define HOST_IF_MSG_SET_CHANNEL                 7
 #define HOST_IF_MSG_DISCONNECT                  8
 #define HOST_IF_MSG_GET_RSSI                    9
-#define HOST_IF_MSG_GET_CHNL                    10
 #define HOST_IF_MSG_ADD_BEACON                  11
 #define HOST_IF_MSG_DEL_BEACON                  12
 #define HOST_IF_MSG_ADD_STATION                 13

@@ -249,7 +248,6 @@ static bool scan_while_connected;
 
 static s8 rssi;
 static s8 link_speed;
-static u8 ch_no;
 static u8 set_ip[2][4];
 static u8 get_ip[2][4];
 static u32 inactive_time;

@@ -1952,27 +1950,6 @@ void wilc_resolve_disconnect_aberration(struct wilc_vif *vif)
 		wilc_disconnect(vif, 1);
 }
 
-static s32 Handle_GetChnl(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid wid;
-
-	wid.id = (u16)WID_CURRENT_CHANNEL;
-	wid.type = WID_CHAR;
-	wid.val = (s8 *)&ch_no;
-	wid.size = sizeof(char);
-
-	result = wilc_send_config_pkt(vif, GET_CFG, &wid, 1,
-				      wilc_get_vif_idx(vif));
-
-	if (result) {
-		netdev_err(vif->ndev, "Failed to get channel number\n");
-		result = -EFAULT;
-	}
-
-	return result;
-}
-
 static void Handle_GetRssi(struct wilc_vif *vif)
 {
 	s32 result = 0;

@@ -2711,10 +2688,6 @@ static int hostIFthread(void *pvArg)
 					     (struct rf_info *)msg.body.data);
 			break;
 
-		case HOST_IF_MSG_GET_CHNL:
-			Handle_GetChnl(msg.vif);
-			break;
-
 		case HOST_IF_MSG_ADD_BEACON:
 			Handle_AddBeacon(msg.vif, &msg.body.beacon_info);
 			break;
Signature · 1 line
2.1.4
author
#10 lore raw

PATCH v2 2/5 staging: wilc1000: remove code for HOST_IF_GET_LINKSPEED

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, the #define, and the link_speed var.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 27 ---------------------------
 1 file changed, 27 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -27
index 546161f..6331453 100644
@@ -32,7 +32,6 @@
 #define HOST_IF_MSG_REMAIN_ON_CHAN              20
 #define HOST_IF_MSG_REGISTER_FRAME              21
 #define HOST_IF_MSG_LISTEN_TIMER_FIRED          22
-#define HOST_IF_MSG_GET_LINKSPEED               23
 #define HOST_IF_MSG_SET_WFIDRV_HANDLER          24
 #define HOST_IF_MSG_SET_MAC_ADDRESS             25
 #define HOST_IF_MSG_GET_MAC_ADDRESS             26

@@ -247,7 +246,6 @@ static u8 rcv_assoc_resp[MAX_ASSOC_RESP_FRAME_SIZE];
 static bool scan_while_connected;
 
 static s8 rssi;
-static s8 link_speed;
 static u8 set_ip[2][4];
 static u8 get_ip[2][4];
 static u32 inactive_time;

@@ -1970,27 +1968,6 @@ static void Handle_GetRssi(struct wilc_vif *vif)
 	up(&vif->hif_drv->sem_get_rssi);
 }
 
-static void Handle_GetLinkspeed(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid wid;
-
-	link_speed = 0;
-
-	wid.id = (u16)WID_LINKSPEED;
-	wid.type = WID_CHAR;
-	wid.val = &link_speed;
-	wid.size = sizeof(char);
-
-	result = wilc_send_config_pkt(vif, GET_CFG, &wid, 1,
-				      wilc_get_vif_idx(vif));
-	if (result) {
-		netdev_err(vif->ndev, "Failed to get LINKSPEED value\n");
-		result = -EFAULT;
-	}
-
-}
-
 static s32 Handle_GetStatistics(struct wilc_vif *vif,
 				struct rf_info *pstrStatistics)
 {

@@ -2679,10 +2656,6 @@ static int hostIFthread(void *pvArg)
 			Handle_GetRssi(msg.vif);
 			break;
 
-		case HOST_IF_MSG_GET_LINKSPEED:
-			Handle_GetLinkspeed(msg.vif);
-			break;
-
 		case HOST_IF_MSG_GET_STATISTICS:
 			Handle_GetStatistics(msg.vif,
 					     (struct rf_info *)msg.body.data);
Signature · 1 line
2.1.4
author
#11 lore raw

PATCH v2 3/5 staging: wilc1000: remove code for HOST_IF_MSG_FLUSH_CONNECT

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 52 -------------------------------
 1 file changed, 52 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -52
index 6331453..6efee28 100644
@@ -38,7 +38,6 @@
 #define HOST_IF_MSG_SET_OPERATION_MODE          27
 #define HOST_IF_MSG_SET_IPADDRESS               28
 #define HOST_IF_MSG_GET_IPADDRESS               29
-#define HOST_IF_MSG_FLUSH_CONNECT               30
 #define HOST_IF_MSG_GET_STATISTICS              31
 #define HOST_IF_MSG_SET_MULTICAST_FILTER        32
 #define HOST_IF_MSG_DEL_BA_SESSION              34

@@ -1187,53 +1186,6 @@ ERRORHANDLER:
 	return result;
 }
 
-static s32 Handle_FlushConnect(struct wilc_vif *vif)
-{
-	s32 result = 0;
-	struct wid strWIDList[5];
-	u32 u32WidsCount = 0;
-	u8 *pu8CurrByte = NULL;
-
-	strWIDList[u32WidsCount].id = WID_INFO_ELEMENT_ASSOCIATE;
-	strWIDList[u32WidsCount].type = WID_BIN_DATA;
-	strWIDList[u32WidsCount].val = info_element;
-	strWIDList[u32WidsCount].size = info_element_size;
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_11I_MODE;
-	strWIDList[u32WidsCount].type = WID_CHAR;
-	strWIDList[u32WidsCount].size = sizeof(char);
-	strWIDList[u32WidsCount].val = (s8 *)(&(mode_11i));
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_AUTH_TYPE;
-	strWIDList[u32WidsCount].type = WID_CHAR;
-	strWIDList[u32WidsCount].size = sizeof(char);
-	strWIDList[u32WidsCount].val = (s8 *)(&auth_type);
-	u32WidsCount++;
-
-	strWIDList[u32WidsCount].id = (u16)WID_JOIN_REQ_EXTENDED;
-	strWIDList[u32WidsCount].type = WID_STR;
-	strWIDList[u32WidsCount].size = join_req_size;
-	strWIDList[u32WidsCount].val = (s8 *)join_req;
-	pu8CurrByte = strWIDList[u32WidsCount].val;
-
-	pu8CurrByte += FLUSHED_BYTE_POS;
-	*(pu8CurrByte) = FLUSHED_JOIN_REQ;
-
-	u32WidsCount++;
-
-	result = wilc_send_config_pkt(vif, SET_CFG, strWIDList,
-				      u32WidsCount,
-				      wilc_get_vif_idx(join_req_vif));
-	if (result) {
-		netdev_err(vif->ndev, "failed to send config packet\n");
-		result = -EINVAL;
-	}
-
-	return result;
-}
-
 static s32 Handle_ConnectTimeout(struct wilc_vif *vif)
 {
 	s32 result = 0;

@@ -2609,10 +2561,6 @@ static int hostIFthread(void *pvArg)
 			Handle_Connect(msg.vif, &msg.body.con_info);
 			break;
 
-		case HOST_IF_MSG_FLUSH_CONNECT:
-			Handle_FlushConnect(msg.vif);
-			break;
-
 		case HOST_IF_MSG_RCVD_NTWRK_INFO:
 			Handle_RcvdNtwrkInfo(msg.vif, &msg.body.net_info);
 			break;
Signature · 1 line
2.1.4
author
#12 lore raw

PATCH v2 4/5 staging: wilc1000: remove code for HOST_IF_MSG_Q_IDLE

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 11 -----------
 1 file changed, 11 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -11
index 6efee28..741a6c7 100644
@@ -41,7 +41,6 @@
 #define HOST_IF_MSG_GET_STATISTICS              31
 #define HOST_IF_MSG_SET_MULTICAST_FILTER        32
 #define HOST_IF_MSG_DEL_BA_SESSION              34
-#define HOST_IF_MSG_Q_IDLE                      35
 #define HOST_IF_MSG_DEL_ALL_STA                 36
 #define HOST_IF_MSG_SET_TX_POWER		38
 #define HOST_IF_MSG_GET_TX_POWER		39

@@ -755,12 +754,6 @@ ERRORHANDLER:
 	return result;
 }
 
-static void Handle_wait_msg_q_empty(void)
-{
-	wilc_initialized = 0;
-	up(&hif_sema_wait_response);
-}
-
 static s32 Handle_ScanDone(struct wilc_vif *vif,
 			   enum scan_event enuEvent);
 

@@ -2549,10 +2542,6 @@ static int hostIFthread(void *pvArg)
 		}
 
 		switch (msg.id) {
-		case HOST_IF_MSG_Q_IDLE:
-			Handle_wait_msg_q_empty();
-			break;
-
 		case HOST_IF_MSG_SCAN:
 			Handle_Scan(msg.vif, &msg.body.scan_info);
 			break;
Signature · 1 line
2.1.4
author
#13 lore raw

PATCH v2 5/5 staging: wilc1000: remove code for HOST_IF_MSG_SET_MAC_ADDRESS

In reply to Alison Schofield

The function that sent this message id was previously removed. Finish the cleanup by removing the call to the message handler, the message handler, and the #define.

Signed-off-by Alison Schofield <[email protected]>
---
 drivers/staging/wilc1000/host_interface.c | 30 ------------------------------
 1 file changed, 30 deletions(-)
drivers/staging/wilc1000/host_interface.c +0 -30
index 741a6c7..854b674 100644
@@ -33,7 +33,6 @@
 #define HOST_IF_MSG_REGISTER_FRAME              21
 #define HOST_IF_MSG_LISTEN_TIMER_FIRED          22
 #define HOST_IF_MSG_SET_WFIDRV_HANDLER          24
-#define HOST_IF_MSG_SET_MAC_ADDRESS             25
 #define HOST_IF_MSG_GET_MAC_ADDRESS             26
 #define HOST_IF_MSG_SET_OPERATION_MODE          27
 #define HOST_IF_MSG_SET_IPADDRESS               28

@@ -413,30 +412,6 @@ static s32 handle_get_ip_address(struct wilc_vif *vif, u8 idx)
 	return result;
 }
 
-static void handle_set_mac_address(struct wilc_vif *vif,
-				   struct set_mac_addr *set_mac_addr)
-{
-	int ret = 0;
-	struct wid wid;
-	u8 *mac_buf;
-
-	mac_buf = kmemdup(set_mac_addr->mac_addr, ETH_ALEN, GFP_KERNEL);
-	if (!mac_buf)
-		return;
-
-	wid.id = (u16)WID_MAC_ADDR;
-	wid.type = WID_STR;
-	wid.val = mac_buf;
-	wid.size = ETH_ALEN;
-
-	ret = wilc_send_config_pkt(vif, SET_CFG, &wid, 1,
-				   wilc_get_vif_idx(vif));
-	if (ret)
-		netdev_err(vif->ndev, "Failed to set mac address\n");
-
-	kfree(mac_buf);
-}
-
 static s32 handle_get_mac_address(struct wilc_vif *vif,
 				  struct get_mac_addr *get_mac_addr)
 {

@@ -2654,11 +2629,6 @@ static int hostIFthread(void *pvArg)
 			handle_get_ip_address(vif, msg.body.ip_info.idx);
 			break;
 
-		case HOST_IF_MSG_SET_MAC_ADDRESS:
-			handle_set_mac_address(msg.vif,
-					       &msg.body.set_mac_info);
-			break;
-
 		case HOST_IF_MSG_GET_MAC_ADDRESS:
 			handle_get_mac_address(msg.vif,
 					       &msg.body.get_mac_info);
Signature · 1 line
2.1.4