Skip to contentSkip to conversation

iio:pressure:ms5611: fix and enhancements

PATCH Superseded Gregor Boirie 3 participants 8 messages Mar 1, 2016 – Mar 5, 2016 4 messages not in the archive

Subsystems (2)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover iio:pressure:ms5611: fix and enhancements

Changes since v1:
* temperature compensation fix:
* reword commit message
* remove useless parenthesis
* power regulator: reword commit message
* add oversampling rate support

Changes since v2:
* remove non printable characters from commit messages

Changes since v3:
* drop first 3 patches since applied onto testing
* fix oops at regulator probing time if regulator support not compiled-in
* complete device-tree support and documentation
* remove continuous sampling support (see Jonathan's "kthread tight loop trigger" proposal)
* checkpatch'ed

Gregor Boirie (2):
iio:pressure:ms5611: fix oops when probing regulator iio:pressure:ms5611: oversampling rate support

Grégor Boirie (1):
iio:pressure:ms5611: complete DT support

 .../devicetree/bindings/iio/pressure/ms5611.txt    |  19 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 drivers/iio/pressure/ms5611.h                      |  20 ++--
 drivers/iio/pressure/ms5611_core.c                 | 113 ++++++++++++++++++++-
 drivers/iio/pressure/ms5611_i2c.c                  |  25 +++--
 drivers/iio/pressure/ms5611_spi.c                  |  32 ++++--
 6 files changed, 185 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/ms5611.txt
Signature · 1 line
2.1.4
#2 lore raw

PATCH v4 1/3 iio:pressure:ms5611: fix oops when probing regulator

In reply to a message not in the archive

When not compiled-in, regulator layer will return a NULL pointer when trying to get a reference to any regulator using devm_regulator_get(). As IS_ERR() does not consider this an error, the ms5611 probing operation will try to enable a NULL regulator, which will invariably cause a kernel crash.
This patch fixes this situation by using devm_regulator_get_optional() instead of devm_regulator_get().

---
 drivers/iio/pressure/ms5611_core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/iio/pressure/ms5611_core.c +6 -2
index 992ad8d..a9c4d49 100644
@@ -291,8 +291,8 @@ static const struct iio_info ms5611_info = {
 static int ms5611_init(struct iio_dev *indio_dev)
 {
 	int ret;
-	struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
-	                                           "vdd");
+	struct regulator *vdd =
+		devm_regulator_get_optional(indio_dev->dev.parent, "vdd");
 
 	/* Enable attached regulator if any. */
 	if (!IS_ERR(vdd)) {
@@ -302,6 +302,10 @@ static int ms5611_init(struct iio_dev *indio_dev)
 			        "failed to enable Vdd supply: %d\n", ret);
 			return ret;
 		}
+	} else {
+		ret = PTR_ERR(vdd);
+		if (ret != -ENODEV)
+			return ret;
 	}
 
 	ret = ms5611_reset(indio_dev);
Signature · 1 line
2.1.4
#5 lore raw

PATCH v4 2/3 iio:pressure:ms5611: complete DT support

In reply to a message not in the archive

From: Grégor Boirie <gregor.boirie-ITF29qwbsa/[email protected]>

Add device-tree ID tables and document bindings.

---
 .../devicetree/bindings/iio/pressure/ms5611.txt       | 19 +++++++++++++++++++
 Documentation/devicetree/bindings/vendor-prefixes.txt |  1 +
 drivers/iio/pressure/ms5611_i2c.c                     | 13 +++++++++++++
 drivers/iio/pressure/ms5611_spi.c                     | 13 +++++++++++++
 4 files changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/ms5611.txt
Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file +19 -0
new file mode 100644
index 0000000..17bca86
@@ -0,0 +1,19 @@
+MEAS ms5611 family pressure sensors
+
+Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+Required properties:
+- compatible: "meas,ms5611" or "meas,ms5607"
+- reg: the I2C address or SPI chip select the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+
+Example:
+
+ms5607@77 {
+	compatible = "meas,ms5607";
+	reg = <0x77>;
+	vdd-supply = <&ldo_3v3_gnss>;
+};
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index 44ddc98..7733f8c 100644
@@ -136,6 +136,7 @@ lsi	LSI Corp. (LSI Logic)
 lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+meas	Measurement Specialties
 mediatek	MediaTek Inc.
 melexis	Melexis N.V.
 merrii	Merrii Technology Co., Ltd.
drivers/iio/pressure/ms5611_i2c.c +13 -0
index 7f6fc8e..57a8f2c 100644
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -113,6 +114,17 @@ static int ms5611_i2c_remove(struct i2c_client *client)
 	return ms5611_remove(i2c_get_clientdata(client));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_i2c_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
+#endif
+
 static const struct i2c_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -123,6 +135,7 @@ MODULE_DEVICE_TABLE(i2c, ms5611_id);
 static struct i2c_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_i2c_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_i2c_probe,
drivers/iio/pressure/ms5611_spi.c +13 -0
index 5cc009e..7ec0c64 100644
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -114,6 +115,17 @@ static int ms5611_spi_remove(struct spi_device *spi)
 	return ms5611_remove(spi_get_drvdata(spi));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_spi_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_spi_matches);
+#endif
+
 static const struct spi_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -124,6 +136,7 @@ MODULE_DEVICE_TABLE(spi, ms5611_id);
 static struct spi_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_spi_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_spi_probe,
Signature · 1 line
2.1.4
#9 lore raw

PATCH v4 3/3 iio:pressure:ms5611: oversampling rate support

In reply to a message not in the archive

Add support for setting and retrieving OverSampling Rate independently for each of the temperature and pressure channels. This allows userspace to fine tune hardware sampling process according to the following tradeoffs :
* the higher the OSR, the finer the resolution ;
* the higher the OSR, the lower the noise ;
BUT:
* the higher the OSR, the larger the drift ;
* the higher the OSR, the longer the response time, i.e. less samples per unit of time.

---
 drivers/iio/pressure/ms5611.h      |  20 ++++---
 drivers/iio/pressure/ms5611_core.c | 105 ++++++++++++++++++++++++++++++++++++-
 drivers/iio/pressure/ms5611_i2c.c  |  12 ++---
 drivers/iio/pressure/ms5611_spi.c  |  19 +++----
 4 files changed, 133 insertions(+), 23 deletions(-)
drivers/iio/pressure/ms5611.h +14 -6
index 8b08e4b..d725a307 100644
@@ -19,12 +19,6 @@
 #define MS5611_RESET			0x1e
 #define MS5611_READ_ADC			0x00
 #define MS5611_READ_PROM_WORD		0xA0
-#define MS5611_START_TEMP_CONV		0x58
-#define MS5611_START_PRESSURE_CONV	0x48
-
-#define MS5611_CONV_TIME_MIN		9040
-#define MS5611_CONV_TIME_MAX		10000
-
 #define MS5611_PROM_WORDS_NB		8
 
 enum {
@@ -39,10 +33,24 @@ struct ms5611_chip_info {
 					    s32 *temp, s32 *pressure);
 };
 
+/*
+ * OverSampling Rate descriptor.
+ * Warning: cmd MUST be kept aligned on a word boundary (see
+ * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
+ */
+struct ms5611_osr {
+	unsigned long conv_usec;
+	u8 cmd;
+	unsigned short rate;
+};
+
 struct ms5611_state {
 	void *client;
 	struct mutex lock;
 
+	const struct ms5611_osr *pressure_osr;
+	const struct ms5611_osr *temp_osr;
+
 	int (*reset)(struct device *dev);
 	int (*read_prom_word)(struct device *dev, int index, u16 *word);
 	int (*read_adc_temp_and_pressure)(struct device *dev,
drivers/iio/pressure/ms5611_core.c +103 -2

151 lines not on this page · raw message

drivers/iio/pressure/ms5611_i2c.c +6 -6
index 57a8f2c..55fb5fc 100644
@@ -63,23 +63,23 @@ static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev,
 {
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV);
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_i2c_read_adc(st, temp);
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV);
+	osr = st->pressure_osr;
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_i2c_read_adc(st, pressure);
 }
 
drivers/iio/pressure/ms5611_spi.c +10 -9
index 7ec0c64..7600483 100644
@@ -56,28 +56,29 @@ static int ms5611_spi_read_adc(struct device *dev, s32 *val)
 static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev,
 						 s32 *temp, s32 *pressure)
 {
-	u8 cmd;
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	cmd = MS5611_START_TEMP_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	/*
+	 * Warning: &osr->cmd MUST be aligned on a word boundary since used as
+	 * 2nd argument (void*) of spi_write_then_read.
+	 */
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_spi_read_adc(dev, temp);
 	if (ret < 0)
 		return ret;
 
-	cmd = MS5611_START_PRESSURE_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	osr = st->pressure_osr;
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_spi_read_adc(dev, pressure);
 }
 
Signature · 1 line
2.1.4
Acked-by
#7 lore raw

Re: [PATCH v4 2/3] iio:pressure:ms5611: complete DT support

In reply to a message not in the archive
Quoted 8 lines · Gregor Boirie

From: Grégor Boirie <gregor.boirie-ITF29qwbsa/[email protected]>

Add device-tree ID tables and document bindings.

---
 .../devicetree/bindings/iio/pressure/ms5611.txt       | 19 +++++++++++++++++++
 Documentation/devicetree/bindings/vendor-prefixes.txt |  1 +
Quoted 4 lines
 drivers/iio/pressure/ms5611_i2c.c                     | 13 +++++++++++++
 drivers/iio/pressure/ms5611_spi.c                     | 13 +++++++++++++
 4 files changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/ms5611.txt

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw

Re: [PATCH v4 1/3] iio:pressure:ms5611: fix oops when probing regulator

In reply to a message not in the archive
Quoted 9 lines · Gregor Boirie

When not compiled-in, regulator layer will return a NULL pointer when trying to get a reference to any regulator using devm_regulator_get(). As IS_ERR() does not consider this an error, the ms5611 probing operation will try to enable a NULL regulator, which will invariably cause a kernel crash.
This patch fixes this situation by using devm_regulator_get_optional() instead of devm_regulator_get().

Ideally include a fixes tag with a patch like this... It makes it easy for those maintaining stable trees to figure out whether it is 'supposed' to apply to their trees or not.

Quoted 9 lines
---
 drivers/iio/pressure/ms5611_core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/iio/pressure/ms5611_core.c +0 -0
index 992ad8d..a9c4d49 100644

drivers/iio/pressure/ms5611_core.c static const struct iio_info ms5611_info = { · line 295

Quoted 7 lines
drivers/iio/pressure/ms5611_core.c +2 -2
@@ -291,8 +291,8 @@ static const struct iio_info ms5611_info = {
 static int ms5611_init(struct iio_dev *indio_dev)
 {
 	int ret;
-	struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
-	                                           "vdd");
+	struct regulator *vdd =
+		devm_regulator_get_optional(indio_dev->dev.parent, "vdd");

Shouldn't have a white space change like this in here. This doesn't want to get applied in a hurry unlike the below. It'll probably be a post merge window fix now...

Quoted 15 lines
drivers/iio/pressure/ms5611_core.c +4 -0
 	/* Enable attached regulator if any. */
 	if (!IS_ERR(vdd)) {
@@ -302,6 +302,10 @@ static int ms5611_init(struct iio_dev *indio_dev)
 			        "failed to enable Vdd supply: %d\n", ret);
 			return ret;
 		}
+	} else {
+		ret = PTR_ERR(vdd);
+		if (ret != -ENODEV)
+			return ret;
 	}
 
 	ret = ms5611_reset(indio_dev);
#8 lore raw

Re: [PATCH v4 2/3] iio:pressure:ms5611: complete DT support

In reply to a message not in the archive
Quoted 5 lines · Gregor Boirie

From: Grégor Boirie <gregor.boirie-ITF29qwbsa/[email protected]>

Add device-tree ID tables and document bindings.

Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it. May or may not make it in this cycle depending on what Linus says in his rc email tomorrow (and whether I get time to do a pull request mid week).

Thanks,

Jonathan

Quoted 122 lines
---
 .../devicetree/bindings/iio/pressure/ms5611.txt       | 19 +++++++++++++++++++
 Documentation/devicetree/bindings/vendor-prefixes.txt |  1 +
 drivers/iio/pressure/ms5611_i2c.c                     | 13 +++++++++++++
 drivers/iio/pressure/ms5611_spi.c                     | 13 +++++++++++++
 4 files changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/ms5611.txt
Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file +19 -0
new file mode 100644
index 0000000..17bca86
@@ -0,0 +1,19 @@
+MEAS ms5611 family pressure sensors
+
+Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+Required properties:
+- compatible: "meas,ms5611" or "meas,ms5607"
+- reg: the I2C address or SPI chip select the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+
+Example:
+
+ms5607@77 {
+	compatible = "meas,ms5607";
+	reg = <0x77>;
+	vdd-supply = <&ldo_3v3_gnss>;
+};
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
index 44ddc98..7733f8c 100644
@@ -136,6 +136,7 @@ lsi	LSI Corp. (LSI Logic)
 lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
+meas	Measurement Specialties
 mediatek	MediaTek Inc.
 melexis	Melexis N.V.
 merrii	Merrii Technology Co., Ltd.
drivers/iio/pressure/ms5611_i2c.c +13 -0
index 7f6fc8e..57a8f2c 100644
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -113,6 +114,17 @@ static int ms5611_i2c_remove(struct i2c_client *client)
 	return ms5611_remove(i2c_get_clientdata(client));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_i2c_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
+#endif
+
 static const struct i2c_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -123,6 +135,7 @@ MODULE_DEVICE_TABLE(i2c, ms5611_id);
 static struct i2c_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_i2c_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_i2c_probe,
drivers/iio/pressure/ms5611_spi.c +13 -0
index 5cc009e..7ec0c64 100644
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -114,6 +115,17 @@ static int ms5611_spi_remove(struct spi_device *spi)
 	return ms5611_remove(spi_get_drvdata(spi));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_spi_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_spi_matches);
+#endif
+
 static const struct spi_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -124,6 +136,7 @@ MODULE_DEVICE_TABLE(spi, ms5611_id);
 static struct spi_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_spi_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_spi_probe,
#11 lore raw

Re: [PATCH v4 3/3] iio:pressure:ms5611: oversampling rate support

In reply to a message not in the archive
Quoted 11 lines · Gregor Boirie

Add support for setting and retrieving OverSampling Rate independently for each of the temperature and pressure channels. This allows userspace to fine tune hardware sampling process according to the following tradeoffs :
* the higher the OSR, the finer the resolution ;
* the higher the OSR, the lower the noise ;
BUT:
* the higher the OSR, the larger the drift ;
* the higher the OSR, the longer the response time, i.e. less samples per unit of time.

Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 288 lines
---
 drivers/iio/pressure/ms5611.h      |  20 ++++---
 drivers/iio/pressure/ms5611_core.c | 105 ++++++++++++++++++++++++++++++++++++-
 drivers/iio/pressure/ms5611_i2c.c  |  12 ++---
 drivers/iio/pressure/ms5611_spi.c  |  19 +++----
 4 files changed, 133 insertions(+), 23 deletions(-)
drivers/iio/pressure/ms5611.h +14 -6
index 8b08e4b..d725a307 100644
@@ -19,12 +19,6 @@
 #define MS5611_RESET			0x1e
 #define MS5611_READ_ADC			0x00
 #define MS5611_READ_PROM_WORD		0xA0
-#define MS5611_START_TEMP_CONV		0x58
-#define MS5611_START_PRESSURE_CONV	0x48
-
-#define MS5611_CONV_TIME_MIN		9040
-#define MS5611_CONV_TIME_MAX		10000
-
 #define MS5611_PROM_WORDS_NB		8
 
 enum {
@@ -39,10 +33,24 @@ struct ms5611_chip_info {
 					    s32 *temp, s32 *pressure);
 };
 
+/*
+ * OverSampling Rate descriptor.
+ * Warning: cmd MUST be kept aligned on a word boundary (see
+ * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
+ */
+struct ms5611_osr {
+	unsigned long conv_usec;
+	u8 cmd;
+	unsigned short rate;
+};
+
 struct ms5611_state {
 	void *client;
 	struct mutex lock;
 
+	const struct ms5611_osr *pressure_osr;
+	const struct ms5611_osr *temp_osr;
+
 	int (*reset)(struct device *dev);
 	int (*read_prom_word)(struct device *dev, int index, u16 *word);
 	int (*read_adc_temp_and_pressure)(struct device *dev,
drivers/iio/pressure/ms5611_core.c +103 -2
index a9c4d49..a2a871b 100644
@@ -18,11 +18,44 @@
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
 #include "ms5611.h"
 
+#define MS5611_INIT_OSR(_cmd, _conv_usec, _rate) \
+	{ .cmd = _cmd, .conv_usec = _conv_usec, .rate = _rate }
+
+static const struct ms5611_osr ms5611_avail_pressure_osr[] = {
+	MS5611_INIT_OSR(0x40, 600,  256),
+	MS5611_INIT_OSR(0x42, 1170, 512),
+	MS5611_INIT_OSR(0x44, 2280, 1024),
+	MS5611_INIT_OSR(0x46, 4540, 2048),
+	MS5611_INIT_OSR(0x48, 9040, 4096)
+};
+
+static const struct ms5611_osr ms5611_avail_temp_osr[] = {
+	MS5611_INIT_OSR(0x50, 600,  256),
+	MS5611_INIT_OSR(0x52, 1170, 512),
+	MS5611_INIT_OSR(0x54, 2280, 1024),
+	MS5611_INIT_OSR(0x56, 4540, 2048),
+	MS5611_INIT_OSR(0x58, 9040, 4096)
+};
+
+static const char ms5611_show_osr[] = "256 512 1024 2048 4096";
+
+static IIO_CONST_ATTR(oversampling_ratio_available, ms5611_show_osr);
+
+static struct attribute *ms5611_attributes[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ms5611_attribute_group = {
+	.attrs = ms5611_attributes,
+};
+
 static bool ms5611_prom_is_valid(u16 *prom, size_t len)
 {
 	int i, j;
@@ -239,11 +272,70 @@ static int ms5611_read_raw(struct iio_dev *indio_dev,
 		default:
 			return -EINVAL;
 		}
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (chan->type != IIO_TEMP && chan->type != IIO_PRESSURE)
+			break;
+		mutex_lock(&st->lock);
+		if (chan->type == IIO_TEMP)
+			*val = (int)st->temp_osr->rate;
+		else
+			*val = (int)st->pressure_osr->rate;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
 }
 
+static const struct ms5611_osr *ms5611_find_osr(int rate,
+						const struct ms5611_osr *osr,
+						size_t count)
+{
+	unsigned int r;
+
+	for (r = 0; r < count; r++)
+		if ((unsigned short)rate == osr[r].rate)
+			break;
+	if (r >= count)
+		return NULL;
+	return &osr[r];
+}
+
+static int ms5611_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ms5611_state *st = iio_priv(indio_dev);
+	const struct ms5611_osr *osr = NULL;
+
+	if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+		return -EINVAL;
+
+	if (chan->type == IIO_TEMP)
+		osr = ms5611_find_osr(val, ms5611_avail_temp_osr,
+				      ARRAY_SIZE(ms5611_avail_temp_osr));
+	else if (chan->type == IIO_PRESSURE)
+		osr = ms5611_find_osr(val, ms5611_avail_pressure_osr,
+				      ARRAY_SIZE(ms5611_avail_pressure_osr));
+	if (!osr)
+		return -EINVAL;
+
+	mutex_lock(&st->lock);
+
+	if (iio_buffer_enabled(indio_dev)) {
+		mutex_unlock(&st->lock);
+		return -EBUSY;
+	}
+
+	if (chan->type == IIO_TEMP)
+		st->temp_osr = osr;
+	else
+		st->pressure_osr = osr;
+
+	mutex_unlock(&st->lock);
+	return 0;
+}
+
 static const unsigned long ms5611_scan_masks[] = {0x3, 0};
 
 static struct ms5611_chip_info chip_info_tbl[] = {
@@ -259,7 +351,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
 	{
 		.type = IIO_PRESSURE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
-			BIT(IIO_CHAN_INFO_SCALE),
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 		.scan_index = 0,
 		.scan_type = {
 			.sign = 's',
@@ -271,7 +364,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
 	{
 		.type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
-			BIT(IIO_CHAN_INFO_SCALE),
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 		.scan_index = 1,
 		.scan_type = {
 			.sign = 's',
@@ -285,6 +379,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
 
 static const struct iio_info ms5611_info = {
 	.read_raw = &ms5611_read_raw,
+	.write_raw = &ms5611_write_raw,
+	.attrs = &ms5611_attribute_group,
 	.driver_module = THIS_MODULE,
 };
 
@@ -323,6 +419,11 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
 
 	mutex_init(&st->lock);
 	st->chip_info = &chip_info_tbl[type];
+	st->temp_osr =
+		&ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1];
+	st->pressure_osr =
+		&ms5611_avail_pressure_osr[ARRAY_SIZE(ms5611_avail_pressure_osr)
+					   - 1];
 	indio_dev->dev.parent = dev;
 	indio_dev->name = name;
 	indio_dev->info = &ms5611_info;
drivers/iio/pressure/ms5611_i2c.c +6 -6
index 57a8f2c..55fb5fc 100644
@@ -63,23 +63,23 @@ static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev,
 {
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV);
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_i2c_read_adc(st, temp);
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV);
+	osr = st->pressure_osr;
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_i2c_read_adc(st, pressure);
 }
 
drivers/iio/pressure/ms5611_spi.c +10 -9
index 7ec0c64..7600483 100644
@@ -56,28 +56,29 @@ static int ms5611_spi_read_adc(struct device *dev, s32 *val)
 static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev,
 						 s32 *temp, s32 *pressure)
 {
-	u8 cmd;
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	cmd = MS5611_START_TEMP_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	/*
+	 * Warning: &osr->cmd MUST be aligned on a word boundary since used as
+	 * 2nd argument (void*) of spi_write_then_read.
+	 */
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_spi_read_adc(dev, temp);
 	if (ret < 0)
 		return ret;
 
-	cmd = MS5611_START_PRESSURE_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	osr = st->pressure_osr;
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_spi_read_adc(dev, pressure);
 }