fix python3 do_configure failed on meta-fsl-ppc with MACHINE = "p1022ds"
cover fix python3 do_configure failed on meta-fsl-ppc with MACHINE = "p1022ds"
I am running a world build, and find build failures:
- usdpaa do_compile failed
Send patch to meta-freescale mailing list "usdpaa: remove default -mcpu=e500mc64 in Makefile"
- pywbem do_compile failed
Already a patch in oe-dev for discussing "[oe] [meta-python][jethro][fido][PATCH] python-m2crypto: fix SSLv2 symbol issue"
The world build is not finished, and other failures is in analysis.
//Hongxu
The following changes since commit 5ac3dc76a5afc2ed35b1abfc8e330e0c580eadf0:
image.bbclass: fix incomplete .rootfs customization (2016-03-07 22:10:54 +0000)
are available in the git repository at:
git://git.openembedded.org/openembedded-core-contrib hongxu/fix-python3-gcc
http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=hongxu/fix-buildpath
Hongxu Jia (1):
tune-ppce500v2.inc: explicitly set gcc float
meta/conf/machine/include/tune-ppce500v2.inc | 4 ++++ 1 file changed, 4 insertions(+)
Signature · 1 line
1.9.1
PATCH 1/1 tune-ppce500v2.inc: explicitly set gcc float
For powerpc*-*-*spe*, default to with_cpu=8548 if --enable-e500-double, and to 8540 otherwise.
vim gcc/config.gcc
...
powerpc*-*-*spe*)
if test x$enable_e500_double = xyes; then
with_cpu=8548
else
with_cpu=8540
fi
;;...
The with_cpu is used for SPE version detection
vim ./gcc/config/rs6000/t-linux
...
7 ifneq (,$(findstring spe,$(target)))
8 MULTIARCH_DIRNAME := powerpc-linux-gnuspe$(if $(findstring 8548,$(with_cpu)),,v1) 9 else
10 MULTIARCH_DIRNAME := powerpc-linux-gnu
...
The variable MULTIARCH_DIRNAME is the output of '$CC --print-multiarch'. Without this patch, the output is 'powerpc-linux-gnuspev1' which caused python3 do_configure failed.
Since ppce500v2 -mcpu is 8548, explicitly add --enable-e500-double could fix the issue.
[YOCTO #9226]
--- meta/conf/machine/include/tune-ppce500v2.inc | 4 ++++ 1 file changed, 4 insertions(+)
meta/conf/machine/include/tune-ppce500v2.inc +4 -0
@@ -18,3 +18,7 @@ AVAILTUNES += "ppce500v2" TUNE_FEATURES_tune-ppce500v2 = "m32 spe ppce500v2" TUNE_PKGARCH_tune-ppce500v2 = "ppce500v2" PACKAGE_EXTRA_ARCHS_tune-ppce500v2 = "ppce500v2" + +# For powerpc*-*-*spe*, default to with_cpu=8548 if +# --enable-e500-double, and to 8540 otherwise. +EXTRA_OECONF_GCC_FLOAT += "${@get_gcc_float_setting(bb, d)}"
Signature · 1 line
1.9.1
Re: [PATCH 1/1] tune-ppce500v2.inc: explicitly set gcc float
Quoted 47 lines · Hongxu Jia
For powerpc*-*-*spe*, default to with_cpu=8548 if --enable-e500 -double,
and to 8540 otherwise.
vim gcc/config.gcc
...powerpc*-*-*spe*) if test x$enable_e500_double = xyes; then with_cpu=8548 else with_cpu=8540 fi ;;...
The
with_cpuis used for SPE version detection
vim ./gcc/config/rs6000/t-linux
...
7 ifneq (,$(findstring spe,$(target)))
8MULTIARCH_DIRNAME:= powerpc-linux-gnuspe$(if $(findstring
8548,$(with_cpu)),,v1)
9 else
10MULTIARCH_DIRNAME:= powerpc-linux-gnu
...The variable
MULTIARCH_DIRNAMEis the output of '$CC --print -multiarch'.
Without this patch, the output is 'powerpc-linux-gnuspev1' which caused
python3do_configurefailed.Since ppce500v2 -mcpu is 8548, explicitly add --enable-e500-double could fix
the issue.[YOCTO #9226]
Signed-off-by Hongxu Jia <[email protected]>--- meta/conf/machine/include/tune-ppce500v2.inc | 4 ++++ 1 file changed, 4 insertions(+)meta/conf/machine/include/tune-ppce500v2.inc +0
-0
meta/conf/machine/include/tune-ppce500v2.inc AVAILTUNES += "ppce500v2" · line 24
Quoted 7 lines
meta/conf/machine/include/tune-ppce500v2.inc +4
-0@@ -18,3 +18,7 @@ AVAILTUNES += "ppce500v2" TUNE_FEATURES_tune-ppce500v2 = "m32 spe ppce500v2" TUNE_PKGARCH_tune-ppce500v2 = "ppce500v2" PACKAGE_EXTRA_ARCHS_tune-ppce500v2 = "ppce500v2" + +# For powerpc*-*-*spe*, default to with_cpu=8548 if +# --enable-e500-double, and to 8540 otherwise. +EXTRA_OECONF_GCC_FLOAT += "${@get_gcc_float_setting(bb, d)}"
This is good to understand what is breaking but the patch as it stands can't be merged as the gcc recipe intentionally doesn't do this, its only done in gcc-target.inc.
Why?
The theory is we should be building one gcc-cross-powerpc, not multiple different variants. I did just try a build and realised that switching machines between p1022ds and qemuppc does rebuild gcc-cross-powerpc but that is a bug. Adding the above is just going to make this harder to fix, and will certainly break the SDK gcc-cross-canadian-gcc.
I'm not sure how we should fix this, particularly given that gcc-cross -powerpc already isn't working properly but the avoid fix isn't right.
Cheers,
Richard
Re: [PATCH 1/1] tune-ppce500v2.inc: explicitly set gcc float
Quoted 7 lines · Richard Purdie
Quoted 4 lines
+
Review
Quoted 3 lines
(quoted diff) +3
-0+# For powerpc*-*-*spe*, default to with_cpu=8548 if +# --enable-e500-double, and to 8540 otherwise. +EXTRA_OECONF_GCC_FLOAT += "${@get_gcc_float_setting(bb, d)}"This is good to understand what is breaking but the patch as it stands can't be merged as the gcc recipe intentionally doesn't do this, its only done in gcc-target.inc.
Yes, that is also my worry about, I am not sure why its only done in gcc-tareget.inc.
Quoted 10 lines
Why?
The theory is we should be building one gcc-cross-powerpc, not multiple different variants. I did just try a build and realised that switching machines between p1022ds and qemuppc does rebuild gcc-cross-powerpc but that is a bug. Adding the above is just going to make this harder to fix, and will certainly break the SDK gcc-cross-canadian-gcc.
I'm not sure how we should fix this, particularly given that gcc-cross -powerpc already isn't working properly but the avoid fix isn't right.
1. How about directly fix python3. Allow the platform triplet 'powerpc-linux-gnuspev1', It should not have any side effect on python3
configure.ac +1 -1
@@ -850,7 +850,7 @@ fi rm -f conftest.c conftest.out if test x$PLATFORM_TRIPLET != x && test x$MULTIARCH != x; then - if test x$PLATFORM_TRIPLET != x$MULTIARCH; then + if test x$PLATFORM_TRIPLET != x$MULTIARCH && test xpowerpc-linux-gnuspev1 != x$MULTIARCH; then AC_MSG_ERROR([internal configure error for the platform triplet,
please file a bug report])
fi
fi
2. Since the above only done in gcc-tareget.inc, how about apply the following fix to gcc-cross.inc and gcc-cross-canadian.inc, we do not check cpu while powerpc pse.
gcc/config/rs6000/t-linux +1 -1
@@ -5,7 +5,7 @@ ifneq (,$(findstring powerpc64,$(target))) MULTILIB_OSDIRNAMES := .=../lib64$(call if_multiarch,:powerpc64-linux-gnu) else ifneq (,$(findstring spe,$(target))) -MULTIARCH_DIRNAME := powerpc-linux-gnuspe$(if $(findstring 8548,$(with_cpu)),,v1) +MULTIARCH_DIRNAME := powerpc-linux-gnuspe else MULTIARCH_DIRNAME := powerpc-linux-gnu endif
I know both of them are workaround.
//Hongxu
Quoted 7 lines
Cheers,
Richard