Skip to contentSkip to conversation

staging: dgnc: fix dgnc_Major_TransparentPrint_Registered camelcase

PATCH In review Juliana Rodrigues 2 participants 6 messages Mar 13, 2016 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: dgnc: fix dgnc_Major_TransparentPrint_Registered camelcase

This patchset aims to fix dgnc_Major_TransparentPrint_Registered CamelCase issue on checkpatch.pl by renaming it in dgnc_driver.h and its calls in dgnc_tty.c.

Juliana Rodrigues (2):
staging: dgnc: renamed dgnc_Major_TransparentPrint_Registered to avoid
camelcase in dgnc_driver.h
staging: dgnc: fixed dgnc_major_transparent_print_registered calls in
dgnc_tty.c

 drivers/staging/dgnc/dgnc_driver.h | 2 +-
 drivers/staging/dgnc/dgnc_tty.c    | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
Signature · 1 line
2.7.2
#1 lore raw

PATCH 1/2 staging: dgnc: renamed dgnc_Major_TransparentPrint_Registered to avoid camelcase in dgnc_driver.h

This patch fixes the following issue on checkpatch.pl:

CHECK: Avoid CamelCase: <dgnc_Major_TransparentPrint_Registered>
+ bool dgnc_Major_TransparentPrint_Registered;

---
 drivers/staging/dgnc/dgnc_driver.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/dgnc/dgnc_driver.h +1 -1
index 98ff648..6d91abd 100644
@@ -211,7 +211,7 @@ struct dgnc_board {
 	char		PrintName[200];
 
 	bool		dgnc_major_serial_registered;
-	bool		dgnc_Major_TransparentPrint_Registered;
+	bool		dgnc_major_transparent_print_registered;
 
 	uint		dgnc_Serial_Major;
 	uint		dgnc_TransparentPrint_Major;
Signature · 1 line
2.7.2
#2 lore raw

Re: [Outreachy kernel] [PATCH 1/2] staging: dgnc: renamed dgnc_Major_TransparentPrint_Registered to avoid camelcase in dgnc_driver.h

The subject is too complicated. It is not necessary to provide the variable name and the file name in the part after the final :.

Quoted 1 line · Juliana Rodrigues

This patch fixes the following issue on checkpatch.pl:

On the other hand, this is sort of too concise. Try to write a commit message that doesn't use the word "fix". Explain instead what you did to make the fix.

julia

Quoted 31 lines

CHECK: Avoid CamelCase: <dgnc_Major_TransparentPrint_Registered>
+ bool dgnc_Major_TransparentPrint_Registered;

---
 drivers/staging/dgnc/dgnc_driver.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/dgnc/dgnc_driver.h +1 -1
index 98ff648..6d91abd 100644
@@ -211,7 +211,7 @@ struct dgnc_board {
 	char		PrintName[200];
 
 	bool		dgnc_major_serial_registered;
-	bool		dgnc_Major_TransparentPrint_Registered;
+	bool		dgnc_major_transparent_print_registered;
 
 	uint		dgnc_Serial_Major;
 	uint		dgnc_TransparentPrint_Major;
Signature · 8 lines
2.7.2

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/936d6cc0ebe887a86581f5d9af2c2832b1ec1698.1457838430.git.juliana.orod%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
#3 lore raw

PATCH 2/2 staging: dgnc: fixed dgnc_major_transparent_print_registered calls in dgnc_tty.c

In reply to Juliana Rodrigues

This patch fixes dgnc_major_transparent_print_registered variable name in dgnc_tty.c that was previously camelcased.

---
 drivers/staging/dgnc/dgnc_tty.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/dgnc/dgnc_tty.c +4 -4
index c723fab..da2c7ed 100644
@@ -273,7 +273,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
 	 */
 	tty_set_operations(&brd->PrintDriver, &dgnc_tty_ops);
 
-	if (!brd->dgnc_Major_TransparentPrint_Registered) {
+	if (!brd->dgnc_major_transparent_print_registered) {
 		/* Register Transparent Print devices */
 		rc = tty_register_driver(&brd->PrintDriver);
 		if (rc < 0) {
@@ -282,7 +282,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
 				rc);
 			return rc;
 		}
-		brd->dgnc_Major_TransparentPrint_Registered = true;
+		brd->dgnc_major_transparent_print_registered = true;
 	}
 
 	dgnc_BoardsByMajor[brd->SerialDriver.major] = brd;
@@ -420,7 +420,7 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
 		brd->dgnc_major_serial_registered = false;
 	}
 
-	if (brd->dgnc_Major_TransparentPrint_Registered) {
+	if (brd->dgnc_major_transparent_print_registered) {
 		dgnc_BoardsByMajor[brd->PrintDriver.major] = NULL;
 		brd->dgnc_TransparentPrint_Major = 0;
 		for (i = 0; i < brd->nasync; i++) {
@@ -430,7 +430,7 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
 			tty_unregister_device(&brd->PrintDriver, i);
 		}
 		tty_unregister_driver(&brd->PrintDriver);
-		brd->dgnc_Major_TransparentPrint_Registered = false;
+		brd->dgnc_major_transparent_print_registered = false;
 	}
 
 	kfree(brd->SerialDriver.ttys);
Signature · 1 line
2.7.2
#4 lore raw

Re: [Outreachy kernel] [PATCH 2/2] staging: dgnc: fixed dgnc_major_transparent_print_registered calls in dgnc_tty.c

Quoted 2 lines · Juliana Rodrigues

This patch fixes dgnc_major_transparent_print_registered variable name in dgnc_tty.c that was previously camelcased.

The text in your commit message should be limited to 80 columns.

julia

Quoted 56 lines
---
 drivers/staging/dgnc/dgnc_tty.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/dgnc/dgnc_tty.c +4 -4
index c723fab..da2c7ed 100644
@@ -273,7 +273,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
 	 */
 	tty_set_operations(&brd->PrintDriver, &dgnc_tty_ops);
 
-	if (!brd->dgnc_Major_TransparentPrint_Registered) {
+	if (!brd->dgnc_major_transparent_print_registered) {
 		/* Register Transparent Print devices */
 		rc = tty_register_driver(&brd->PrintDriver);
 		if (rc < 0) {
@@ -282,7 +282,7 @@ int dgnc_tty_register(struct dgnc_board *brd)
 				rc);
 			return rc;
 		}
-		brd->dgnc_Major_TransparentPrint_Registered = true;
+		brd->dgnc_major_transparent_print_registered = true;
 	}
 
 	dgnc_BoardsByMajor[brd->SerialDriver.major] = brd;
@@ -420,7 +420,7 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
 		brd->dgnc_major_serial_registered = false;
 	}
 
-	if (brd->dgnc_Major_TransparentPrint_Registered) {
+	if (brd->dgnc_major_transparent_print_registered) {
 		dgnc_BoardsByMajor[brd->PrintDriver.major] = NULL;
 		brd->dgnc_TransparentPrint_Major = 0;
 		for (i = 0; i < brd->nasync; i++) {
@@ -430,7 +430,7 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
 			tty_unregister_device(&brd->PrintDriver, i);
 		}
 		tty_unregister_driver(&brd->PrintDriver);
-		brd->dgnc_Major_TransparentPrint_Registered = false;
+		brd->dgnc_major_transparent_print_registered = false;
 	}
 
 	kfree(brd->SerialDriver.ttys);
Signature · 8 lines
2.7.2

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/589a3351f280163de7cbfd12a47335bc976a0d43.1457838430.git.juliana.orod%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
#5 lore raw
In reply to Juliana Rodrigues
Quoted 2 lines · Juliana Rodrigues

This patchset aims to fix dgnc_Major_TransparentPrint_Registered CamelCase issue on checkpatch.pl by renaming it in dgnc_driver.h and its calls in dgnc_tty.c.

Given the small size of the changes and the close relationship between them, this could have been just one patch.

Again, the commit message goes over 80 characters. Try to stop well before, so that when someone responds to your commit, the whole thing stll fits in 80 characters.

julia

Quoted 21 lines

Juliana Rodrigues (2):
staging: dgnc: renamed dgnc_Major_TransparentPrint_Registered to avoid
camelcase in dgnc_driver.h
staging: dgnc: fixed dgnc_major_transparent_print_registered calls in
dgnc_tty.c

 drivers/staging/dgnc/dgnc_driver.h | 2 +-
 drivers/staging/dgnc/dgnc_tty.c    | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
Signature · 8 lines
2.7.2

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/cover.1457838430.git.juliana.orod%40gmail.com.
For more options, visit https://groups.google.com/d/optout.