fixes for runqemu

index 48b7551..771aa38 100755
@@ -19,35 +19,36 @@
 
 usage() {
     MYNAME=`basename $0`
-    echo ""
-    echo "Usage: you can run this script with any valid combination"
-    echo "of the following environment variables (in any order):"
-    echo "  KERNEL - the kernel image file to use"
-    echo "  ROOTFS - the rootfs image file or nfsroot directory to use"
-    echo "  MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)"
-    echo "  RAMFS - boot a ramfs-based image"
-    echo "  ISO - boot an ISO image"
-    echo "  VM - boot a virtual machine image (= a file representing a full disk with boot loader)"
-    echo "  Simplified QEMU command-line options can be passed with:"
-    echo "    nographic - disables video console"
-    echo "    serial - enables a serial console on /dev/ttyS0"
-    echo "    kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required)"
-    echo "    kvm-vhost - enables KVM with vhost support when running qemux86/qemux86-64 (VT-capable CPU required)"
-    echo "    publicvnc - enable a VNC server open to all hosts"
-    echo "  qemuparams=\"xyz\" - specify custom parameters to QEMU"
-    echo "  bootparams=\"xyz\" - specify custom kernel parameters during boot"
-    echo ""
-    echo "Examples:"
-    echo "  $MYNAME qemuarm"
-    echo "  $MYNAME qemux86-64 core-image-sato ext4"
-    echo "  $MYNAME qemux86-64 wic-image-minimal wic"
-    echo "  $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial"
-    echo "  $MYNAME qemux86 ramfs"
-    echo "  $MYNAME qemux86 iso"
-    echo "  $MYNAME qemux86 qemuparams=\"-m 256\""
-    echo "  $MYNAME qemux86 bootparams=\"psplash=false\""
-    echo "  $MYNAME path/to/<image>-<machine>.vmdk"
-    echo "  $MYNAME path/to/<image>-<machine>.wic"
+cat <<_EOF
+
+Usage: you can run this script with any valid combination
+of the following environment variables (in any order):
+  KERNEL - the kernel image file to use
+  ROOTFS - the rootfs image file or nfsroot directory to use
+  MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)
+  RAMFS - boot a ramfs-based image
+  ISO - boot an ISO image
+  Simplified QEMU command-line options can be passed with:
+    nographic - disables video console
+    serial - enables a serial console on /dev/ttyS0
+    kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required)
+    kvm-vhost - enables KVM with vhost support when running qemux86/qemux86-64 (VT-capable CPU required)
+    publicvnc - enable a VNC server open to all hosts
+  qemuparams="xyz" - specify custom parameters to QEMU
+  bootparams="xyz" - specify custom kernel parameters during boot
+
+Examples:
+  $MYNAME qemuarm
+  $MYNAME qemux86-64 core-image-sato ext4
+  $MYNAME qemux86-64 wic-image-minimal wic
+  $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial
+  $MYNAME qemux86 ramfs
+  $MYNAME qemux86 iso
+  $MYNAME qemux86 qemuparams="-m 256"
+  $MYNAME qemux86 bootparams="psplash=false"
+  $MYNAME path/to/<image>-<machine>.vmdk
+  $MYNAME path/to/<image>-<machine>.wic
+_EOF
     exit 1
 }
 

@@ -63,7 +64,6 @@ error() {
 MACHINE=${MACHINE:=""}
 KERNEL=${KERNEL:=""}
 ROOTFS=${ROOTFS:=""}
-VM=${VM:=""}
 FSTYPE=${FSTYPE:=""}
 LAZY_ROOTFS=""
 SCRIPT_QEMU_OPT=""

@@ -101,6 +101,7 @@ process_filename() {
 	/hddimg/|/hdddirect/|/vmdk/)
 		FSTYPE=$EXT
 		VM=$filename
+		ROOTFS=$filename
 		;;
 	*)
 		error "unknown file arg [$filename]"

@@ -118,7 +119,7 @@ while true; do
             [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \
                 error "conflicting MACHINE types [$MACHINE] and [$arg]"
             ;;
-        "ext2" | "ext3" | "ext4" | "jffs2" | "nfs" | "btrfs" | "hddimg" | "hdddirect" | "wic" )
+        "ext2" | "ext3" | "ext4" | "jffs2" | "nfs" | "btrfs" | "hddimg" | "hdddirect" | "wic" | "vmdk")
             [ -z "$FSTYPE" -o "$FSTYPE" = "$arg" ] && FSTYPE=$arg || \
                 error "conflicting FSTYPE types [$FSTYPE] and [$arg]"
             ;;

@@ -127,8 +128,8 @@ while true; do
             RAMFS=true
             ;;
         "iso")
-	    FSTYPE=iso
-	    ISOFS=true
+            FSTYPE=iso
+            ISOFS=true
 	    ;;
         "nographic")
             SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -nographic"

@@ -142,7 +143,7 @@ while true; do
         "tcpserial="*)
             TCPSERIAL_PORTNUM=${arg##tcpserial=}
             ;;
-	"biosdir="*)
+        "biosdir="*)
             CUSTOMBIOSDIR="${arg##biosdir=}"
 	    ;;
         "biosfilename="*)

@@ -187,7 +188,7 @@ while true; do
             ;;
         *-image*)
             [ -z "$ROOTFS" ] || \
-		error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
+        		error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
             if [ -f "$arg" ]; then
                 process_filename $arg
             elif [ -d "$arg" ]; then

@@ -237,7 +238,7 @@ fi
 
 # Report errors for missing combinations of options
 if [ -z "$MACHINE" -a -z "$KERNEL" -a -z "$VM" -a "$FSTYPE" != "wic" ]; then
-    error "you must specify at least a MACHINE, VM, or KERNEL argument"
+    error "you must specify at least a MACHINE or KERNEL argument"
 fi
 if [ "$FSTYPE" = "nfs" -a -z "$ROOTFS" ]; then
     error "NFS booting without an explicit ROOTFS path is not yet supported"

@@ -489,7 +490,7 @@ if [ "$LAZY_ROOTFS" = "true" ]; then
     fi
 fi
 
-if [ -z "$ROOTFS" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" ]; then
+if [ -z "$ROOTFS" ]; then
     setup_path_vars 1
     T=$DEPLOY_DIR_IMAGE
     eval rootfs_list=\$${machine2}_DEFAULT_ROOTFS

@@ -497,6 +498,8 @@ if [ -z "$ROOTFS" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTY
 
     if [ -z "$ROOTFS" ]; then
         error "Unable to determine default rootfs for MACHINE [$MACHINE]"
+    elif [ "x$FSTYPE" = "xvmdk" -o "x$FSTYPE" = "xhddimg" -o "x$FSTYPE" = "xhdddirect" ]; then
+		VM=$ROOTFS
     fi
 fi
 # ROOTFS is now set for all cases, now expand it to be an absolute path, it should exist at this point

index ebed2bd..9d5d6af 100755
@@ -28,7 +28,6 @@
 #   ROOTFS - the disk image file to use
 #
 
-
 mem_size=-1
 
 #Get rid of <> and get the contents of extra qemu running params

@@ -720,18 +719,31 @@ elif [ "$NUM_SERIAL_OPTS" = "1" ]; then
     SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT $SECOND_SERIAL_OPT"
 fi
 
-
 echo "Running $QEMU..."
 # -no-reboot is a mandatory option - see bug #100
 if [ "$FSTYPE" = "vmdk" -o "$FSTYPE" = "hddimg" -o "$FSTYPE" = "hdddirect" ]; then
-    echo $QEMUBIN $VM $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMUBIN $VM $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT
+    # Check root=/dev/sdX or root=/dev/vdX
+    [ ! -e "$VM" ] && error "VM image is not found!"
+    if grep -q 'root=/dev/sd' $VM; then
+        echo "Using scsi drive"
+        VM_DRIVE="-drive if=none,id=hd,file=$VM -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd"
+    elif grep -q 'root=/dev/vd' $VM; then
+        echo "Using virtio block drive"
+        VM_DRIVE="-drive if=virtio,file=$VM"
+    else
+        VM_DRIVE=$VM
+    fi
+    QEMU_FIRE="$QEMUBIN $VM_DRIVE $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
+    echo $QEMU_FIRE
+    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
 elif [ "$FSTYPE" = "iso" -o "$FSTYPE" = "wic" ]; then
-    echo $QEMUBIN $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMUBIN $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT
+    QEMU_FIRE="$QEMUBIN $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
+    echo $QEMU_FIRE
+    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
 else
-    echo $QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SLIRP_CMD $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT --append '"'$KERNCMDLINE $SCRIPT_KERNEL_OPT'"'
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT --append "$KERNCMDLINE $SCRIPT_KERNEL_OPT"
+    QEMU_FIRE="$QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SLIRP_CMD $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
+    echo $QEMU_FIRE -append '"'$KERNCMDLINE $SCRIPT_KERNEL_OPT'"'
+    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE -append "$KERNCMDLINE $SCRIPT_KERNEL_OPT"
 fi
 ret=$?
 if [ "$SLIRP_ENABLED" != "yes" ]; then

index 771aa38..ed32bc2 100755
@@ -75,6 +75,7 @@ KVM_ENABLED="no"
 KVM_ACTIVE="no"
 VHOST_ENABLED="no"
 VHOST_ACTIVE="no"
+IS_VM="false"
 
 # Determine whether the file is a kernel or QEMU image, and set the
 # appropriate variables

@@ -89,7 +90,7 @@ process_filename() {
 		[ -z "$KERNEL" ] && KERNEL=$filename || \
 		    error "conflicting KERNEL args [$KERNEL] and [$filename]"
 		;;
-	/ext[234]/|/jffs2/|/btrfs/|/wic/)
+	/ext[234]/|/jffs2/|/btrfs/)
 		# A file ending in a supportted fs type is a rootfs image
 		if [ -z "$FSTYPE" -o "$FSTYPE" = "$EXT" ]; then
 		    FSTYPE=$EXT

@@ -98,10 +99,11 @@ process_filename() {
 		    error "conflicting FSTYPE types [$FSTYPE] and [$EXT]"
 		fi
 		;;
-	/hddimg/|/hdddirect/|/vmdk/)
+	/hddimg/|/hdddirect/|/vmdk/|/wic/)
 		FSTYPE=$EXT
 		VM=$filename
 		ROOTFS=$filename
+		IS_VM="true"
 		;;
 	*)
 		error "unknown file arg [$filename]"

@@ -109,6 +111,13 @@ process_filename() {
     esac
 }
 
+check_fstype_conflicts() {
+    if [ -z "$FSTYPE" -o "$FSTYPE" = "$1" ]; then
+        FSTYPE=$1
+    else
+        error "conflicting FSTYPE types [$FSTYPE] and [$1]"
+    fi
+}
 # Parse command line args without requiring specific ordering. It's a
 # bit more complex, but offers a great user experience.
 while true; do

@@ -119,9 +128,12 @@ while true; do
             [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \
                 error "conflicting MACHINE types [$MACHINE] and [$arg]"
             ;;
-        "ext2" | "ext3" | "ext4" | "jffs2" | "nfs" | "btrfs" | "hddimg" | "hdddirect" | "wic" | "vmdk")
-            [ -z "$FSTYPE" -o "$FSTYPE" = "$arg" ] && FSTYPE=$arg || \
-                error "conflicting FSTYPE types [$FSTYPE] and [$arg]"
+        "ext"[234] | "jffs2" | "nfs" | "btrfs")
+            check_fstype_conflicts $arg
+            ;;
+        "hddimg" | "hdddirect" | "wic" | "vmdk")
+            check_fstype_conflicts $arg
+            IS_VM="true"
             ;;
         "ramfs")
             FSTYPE=cpio.gz

@@ -245,7 +257,7 @@ if [ "$FSTYPE" = "nfs" -a -z "$ROOTFS" ]; then
 fi
 
 if [ -z "$MACHINE" ]; then
-    if [ "x$FSTYPE" = "xvmdk" ] || [ "x$FSTYPE" = "xhddimg" ] || [ "x$FSTYPE" = "xhdddirect" ] || [ "x$FSTYPE" = "xwic" ]; then
+    if [ "$IS_VM" = "true" ]; then
         [ "x$FSTYPE" = "xwic" ] && filename=$ROOTFS || filename=$VM
         MACHINE=`basename $filename | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'`
         if [ -z "$MACHINE" ]; then

@@ -457,7 +469,7 @@ if [ -e "$ROOTFS" -a -z "$FSTYPE" ]; then
     fi
 fi
 
-if [ -z "$KERNEL" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" -a "x$FSTYPE" != "xwic" ]; then
+if [ -z "$KERNEL" -a "$IS_VM" = "false" ]; then \
     setup_path_vars 1
     eval kernel_file=\$${machine2}_DEFAULT_KERNEL
     KERNEL=$DEPLOY_DIR_IMAGE/$kernel_file

@@ -483,7 +495,7 @@ fi
 if [ "$LAZY_ROOTFS" = "true" ]; then
     setup_path_vars 1
     echo "Assuming $ROOTFS really means $DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE"
-    if [ "$FSTYPE" = "hddimg" -o "x$FSTYPE" = "xhdddirect" ]; then
+    if [ "$IS_VM" = "true" ]; then
         VM=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE
     else
         ROOTFS=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE

@@ -498,7 +510,7 @@ if [ -z "$ROOTFS" ]; then
 
     if [ -z "$ROOTFS" ]; then
         error "Unable to determine default rootfs for MACHINE [$MACHINE]"
-    elif [ "x$FSTYPE" = "xvmdk" -o "x$FSTYPE" = "xhddimg" -o "x$FSTYPE" = "xhdddirect" ]; then
+    elif [ "$IS_VM" = "true" ]; then
 		VM=$ROOTFS
     fi
 fi

@@ -508,11 +520,11 @@ ROOTFS=`readlink -f $ROOTFS`
 
 echo ""
 echo "Continuing with the following parameters:"
-if [ "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" ]; then
+if [ "$IS_VM" = "false" ]; then
     echo "KERNEL: [$KERNEL]"
     echo "ROOTFS: [$ROOTFS]"
 else
-    echo "VMDK:   [$VM]"
+    echo "VM:   [$VM]"
 fi
 echo "FSTYPE: [$FSTYPE]"
 

index 9d5d6af..b7d80b2 100755
@@ -300,13 +300,13 @@ case "$MACHINE" in
     ;;
 esac
 
-if [ ! -f "$KERNEL" -a "x$FSTYPE" != "xvmdk" -a "x$FSTYPE" != "xhddimg" -a "x$FSTYPE" != "xhdddirect" -a "x$FSTYPE" != "xwic" ]; then
+if [ ! -f "$KERNEL" -a "$IS_VM" = "false" ]; then
     echo "Error: Kernel image file $KERNEL doesn't exist"
     cleanup
     return 1
 fi
 
-if [ "$FSTYPE" != "nfs" -a "$FSTYPE" != "vmdk" -a "$FSTYPE" != "hddimg" -a "$FSTYPE" != "hdddirect" -a ! -f "$ROOTFS" ]; then
+if [ "$FSTYPE" != "nfs" -a "$IS_VM" = "false" -a ! -f "$ROOTFS" ]; then
     echo "Error: Image file $ROOTFS doesn't exist"
     cleanup
     return 1

@@ -428,7 +428,7 @@ if [ "$MACHINE" = "qemux86" ]; then
         KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
     fi
-    if [ "$FSTYPE" = "vmdk" -o "$FSTYPE" = "hddimg" -o "$FSTYPE" = "hdddirect" ]; then
+    if [ "$IS_VM" = "true" ]; then
         QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
     fi
     # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in

@@ -464,7 +464,7 @@ if [ "$MACHINE" = "qemux86-64" ]; then
         KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
     fi
-    if [ "$FSTYPE" = "vmdk" -o "$FSTYPE" = "hddimg" -o "$FSTYPE" = "hdddirect" ]; then
+    if [ "$IS_VM" = "true" ]; then
         QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
     fi
     # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in

@@ -721,7 +721,7 @@ fi
 
 echo "Running $QEMU..."
 # -no-reboot is a mandatory option - see bug #100
-if [ "$FSTYPE" = "vmdk" -o "$FSTYPE" = "hddimg" -o "$FSTYPE" = "hdddirect" ]; then
+if [ "$IS_VM" = "true" ]; then
     # Check root=/dev/sdX or root=/dev/vdX
     [ ! -e "$VM" ] && error "VM image is not found!"
     if grep -q 'root=/dev/sd' $VM; then

index ed32bc2..058ee29 100755
@@ -26,8 +26,6 @@ of the following environment variables (in any order):
   KERNEL - the kernel image file to use
   ROOTFS - the rootfs image file or nfsroot directory to use
   MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)
-  RAMFS - boot a ramfs-based image
-  ISO - boot an ISO image
   Simplified QEMU command-line options can be passed with:
     nographic - disables video console
     serial - enables a serial console on /dev/ttyS0

index 058ee29..d95711b 100755
@@ -40,8 +40,7 @@ Examples:
   $MYNAME qemux86-64 core-image-sato ext4
   $MYNAME qemux86-64 wic-image-minimal wic
   $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial
-  $MYNAME qemux86 ramfs
-  $MYNAME qemux86 iso
+  $MYNAME qemux86 iso/hddimg/vmdk/qcow2/vdi/ramfs...
   $MYNAME qemux86 qemuparams="-m 256"
   $MYNAME qemux86 bootparams="psplash=false"
   $MYNAME path/to/<image>-<machine>.vmdk

@@ -97,7 +96,7 @@ process_filename() {
 		    error "conflicting FSTYPE types [$FSTYPE] and [$EXT]"
 		fi
 		;;
-	/hddimg/|/hdddirect/|/vmdk/|/wic/)
+	/hddimg/|/hdddirect/|/vmdk/|/wic/|/qcow2/|/vdi/)
 		FSTYPE=$EXT
 		VM=$filename
 		ROOTFS=$filename

@@ -129,7 +128,7 @@ while true; do
         "ext"[234] | "jffs2" | "nfs" | "btrfs")
             check_fstype_conflicts $arg
             ;;
-        "hddimg" | "hdddirect" | "wic" | "vmdk")
+        "hddimg" | "hdddirect" | "wic" | "vmdk" | "qcow2" | "vdi")
             check_fstype_conflicts $arg
             IS_VM="true"
             ;;

index d95711b..b4cc9de 100755
@@ -125,7 +125,7 @@ while true; do
             [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \
                 error "conflicting MACHINE types [$MACHINE] and [$arg]"
             ;;
-        "ext"[234] | "jffs2" | "nfs" | "btrfs")
+        "ext"[234] | "jffs2" | "nfs" | "btrfs" | "iso")
             check_fstype_conflicts $arg
             ;;
         "hddimg" | "hdddirect" | "wic" | "vmdk" | "qcow2" | "vdi")

@@ -134,12 +134,7 @@ while true; do
             ;;
         "ramfs")
             FSTYPE=cpio.gz
-            RAMFS=true
             ;;
-        "iso")
-            FSTYPE=iso
-            ISOFS=true
-	    ;;
         "nographic")
             SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -nographic"
             SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0"

index b7d80b2..d591c09 100755
@@ -593,12 +593,12 @@ if [ "$MACHINE" = "qemuzynq" ]; then
     fi
 fi
 
-if [ "x$RAMFS" = "xtrue" ]; then
+if [ "$FSTYPE" = "cpio.gz" ]; then
     QEMUOPTIONS="-initrd $ROOTFS -nographic"
     KERNCMDLINE="root=/dev/ram0 console=ttyS0 debugshell"
 fi
 
-if [ "x$ISOFS" = "xtrue" ]; then
+if [ "$FSTYPE" = "iso" ]; then
     QEMUOPTIONS="$QEMU_NETWORK_CMD -cdrom $ROOTFS $QEMU_UI_OPTIONS"
 fi
 

index b4cc9de..ab7c4f3 100755
@@ -350,12 +350,6 @@ QEMUMICROBLAZE_DEFAULT_FSTYPE=cpio
 QEMUZYNQ_DEFAULT_KERNEL=uImage
 QEMUZYNQ_DEFAULT_FSTYPE=cpio
 
-AKITA_DEFAULT_KERNEL=zImage-akita.bin
-AKITA_DEFAULT_FSTYPE=jffs2
-
-SPITZ_DEFAULT_KERNEL=zImage-spitz.bin
-SPITZ_DEFAULT_FSTYPE=ext3
-
 setup_path_vars() {
     if [ -z "$OE_TMPDIR" ] ; then
         PATHS_REQUIRED=true

70 lines not on this page · raw message

index e042161..72221ed 100755
@@ -38,49 +38,6 @@ mem_set=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-m[[:space:]] *[0-9]*\)'`
 if [ ! -z "$mem_set" ] ; then
 #Get memory setting size from user input
   mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
-else
-    case "$MACHINE" in
-        "qemux86")
-            mem_size=256
-            ;;
-        "qemux86-64")
-            mem_size=256
-            ;;
-        "qemuarm")
-            mem_size=128
-            ;;
-        "qemuarm64")
-            mem_size=512
-            ;;
-        "qemumicroblaze")
-            mem_size=256
-            ;;
-        "qemumips"|"qemumips64")
-            mem_size=256
-            ;;
-        "qemuppc")
-            mem_size=256
-            ;;
-        "qemush4")
-            mem_size=1024
-            ;;
-        "qemuzynq")
-            mem_size=1024
-            ;;
-        *)
-            mem_size=64
-            ;;
-    esac
-
-fi
-
-# QEMU_MEMORY has 'M' appended to mem_size
-QEMU_MEMORY="$mem_size"M
-
-# We need to specify -m <mem_size> to overcome a bug in qemu 0.14.0
-# https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/584480
-if [ -z "$mem_set" ] ; then
-  SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -m $mem_size"
 fi
 
 # This file is created when runqemu-gen-tapdevs creates a bank of tap

@@ -267,26 +224,6 @@ else
         fi
 fi
 
-case "$MACHINE" in
-    "qemuarm") ;;
-    "qemuarm64") ;;
-    "qemumicroblaze") ;;
-    "qemumips") ;;
-    "qemumipsel") ;;
-    "qemumips64") ;;
-    "qemush4") ;;
-    "qemuppc") ;;
-    "qemuarmv6") ;;
-    "qemuarmv7") ;;
-    "qemux86") ;;
-    "qemux86-64") ;;
-    "qemuzynq") ;;
-    *)
-        echo "Error: Unsupported machine type $MACHINE"
-        return 1
-    ;;
-esac
-
 if [ ! -f "$KERNEL" -a "$IS_VM" = "false" ]; then
     echo "Error: Kernel image file $KERNEL doesn't exist"
     cleanup

@@ -329,12 +266,25 @@ if [ "$FSTYPE" = "nfs" ]; then
     NFSRUNNING="true"
 fi
 
-if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "qemuarmv6" -o "$MACHINE" = "qemuarmv7" ]; then
+
+set_mem_size() {
+    if [ ! -z "$mem_set" ] ; then
+        #Get memory setting size from user input
+        mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
+    else
+        mem_size=$1
+    fi
+    # QEMU_MEMORY has 'M' appended to mem_size
+    QEMU_MEMORY="$mem_size"M
+
+}
+
+config_qemuarm() {
+    set_mem_size 128
     QEMU=qemu-system-arm
     MACHINE_SUBTYPE=versatilepb
     export QEMU_AUDIO_DRV="none"
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    # QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -force-pointer"
     if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
         KERNCMDLINE="root=$DROOT rw console=ttyAMA0,115200 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY highres=off"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -M ${MACHINE_SUBTYPE} $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"

@@ -354,9 +304,10 @@ if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "qemuarmv6" -o "$MACHINE" = "qemuarm
     if [ "$MACHINE" = "qemuarmv7" ]; then
         QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
     fi
-fi
+}
 
-if [ "$MACHINE" = "qemuarm64" ]; then
+config_qemuarm64() {
+    set_mem_size 512
     QEMU=qemu-system-aarch64
 
     QEMU_NETWORK_CMD="-netdev tap,id=net0,ifname=$TAP,script=no,downscript=no -device virtio-net-device,netdev=net0 "

@@ -383,9 +334,10 @@ if [ "$MACHINE" = "qemuarm64" ]; then
         KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw console=ttyAMA0,38400 mem=$QEMU_MEMORY highres=off $KERNEL_NETWORK_CMD"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -machine virt -cpu cortex-a57 $QEMU_UI_OPTIONS"
     fi
-fi
+}
 
-if [ "$MACHINE" = "qemux86" ]; then
+config_qemux86() {
+    set_mem_size 256
     QEMU=qemu-system-i386
     if [ "$KVM_ACTIVE" = "yes" ]; then
         CPU_SUBTYPE=kvm32

@@ -421,9 +373,10 @@ if [ "$MACHINE" = "qemux86" ]; then
     # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
     # qemux86 and qemux86-64. We can use timer interrupt mode for now.
     KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-fi
+}
 
-if [ "$MACHINE" = "qemux86-64" ]; then
+config_qemux86_64() {
+    set_mem_size 256
     QEMU=qemu-system-x86_64
     if [ "$KVM_ACTIVE" = "yes" ]; then
         CPU_SUBTYPE=kvm64

@@ -457,9 +410,10 @@ if [ "$MACHINE" = "qemux86-64" ]; then
     # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
     # qemux86 and qemux86-64. We can use timer interrupt mode for now.
     KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-fi
+}
 
-if [ "$MACHINE" = "qemumips" -o "$MACHINE" = "qemumipsel" -o "$MACHINE" = "qemumips64" ]; then
+config_qemumips() {
+    set_mem_size 256
     case "$MACHINE" in
        qemumips)   QEMU=qemu-system-mips ;;
        qemumipsel) QEMU=qemu-system-mipsel ;;

@@ -481,9 +435,10 @@ if [ "$MACHINE" = "qemumips" -o "$MACHINE" = "qemumipsel" -o "$MACHINE" = "qemum
         KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
     fi
-fi
+}
 
-if [ "$MACHINE" = "qemuppc" ]; then
+config_qemuppc() {
+    set_mem_size 256
     QEMU=qemu-system-ppc
     MACHINE_SUBTYPE=mac99
     CPU_SUBTYPE=G4

@@ -506,9 +461,10 @@ if [ "$MACHINE" = "qemuppc" ]; then
         KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
     fi
-fi
+}
 
-if [ "$MACHINE" = "qemush4" ]; then
+config_qemush4() {
+    set_mem_size 1024
     QEMU=qemu-system-sh4
     MACHINE_SUBTYPE=r2d
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"

@@ -528,30 +484,72 @@ if [ "$MACHINE" = "qemush4" ]; then
         QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS -monitor null -serial vc -serial stdio"
         SERIALSTDIO="1"
     fi
-fi
-
-if [ "${FSTYPE:0:3}" = "ext" ]; then
-    KERNCMDLINE="$KERNCMDLINE rootfstype=$FSTYPE"
-fi
+}
 
-if [ "$MACHINE" = "qemumicroblaze" ]; then
-    QEMU=qemu-system-microblazeel
-    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M petalogix-ml605 -serial mon:stdio"
+config_qemuzynq() {
+    set_mem_size 1024
+    QEMU=qemu-system-arm
+    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xilinx-zynq-a9 -serial null -serial mon:stdio -dtb $KERNEL-$MACHINE.dtb"
+    # zynq serial ports are named 'ttyPS0' and 'ttyPS1', fixup the default values
+    SCRIPT_KERNEL_OPT=$(echo "$SCRIPT_KERNEL_OPT" | sed 's/console=ttyS/console=ttyPS/g')
     if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
         KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
     fi
-fi
+}
 
-if [ "$MACHINE" = "qemuzynq" ]; then
-    QEMU=qemu-system-arm
-    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xilinx-zynq-a9 -serial null -serial mon:stdio -dtb $KERNEL-$MACHINE.dtb"
-    # zynq serial ports are named 'ttyPS0' and 'ttyPS1', fixup the default values
-    SCRIPT_KERNEL_OPT=$(echo "$SCRIPT_KERNEL_OPT" | sed 's/console=ttyS/console=ttyPS/g')
+config_qemumicroblaze() {
+    set_mem_size 256
+    QEMU=qemu-system-microblazeel
+    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M petalogix-ml605 -serial mon:stdio"
     if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
         KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
     fi
+}
+
+case "$MACHINE" in
+    "qemuarm" | "qemuarmv6" | "qemuarmv7")
+        config_qemuarm
+        ;;
+    "qemuarm64")
+        config_qemuarm64
+        ;;
+    "qemux86")
+        config_qemux86
+        ;;
+    "qemux86-64")
+        config_qemux86_64
+        ;;
+    "qemumips" | "qemumipsel" | "qemumips64")
+        config_qemumips
+        ;;
+    "qemuppc")
+        config_qemuppc
+        ;;
+    "qemush4")
+        config_qemush4
+        ;;
+    "qemuzynq")
+        config_qemuzynq
+        ;;
+    "qemumicroblaze")
+        config_qemumicroblaze
+        ;;
+    *)
+        echo "Error: Unsupported machine type $MACHINE"
+        return 1
+    ;;
+esac
+
+# We need to specify -m <mem_size> to overcome a bug in qemu 0.14.0
+# https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/584480
+if [ -z "$mem_set" ] ; then
+  SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -m $mem_size"
+fi
+
+if [ "${FSTYPE:0:3}" = "ext" ]; then
+    KERNCMDLINE="$KERNCMDLINE rootfstype=$FSTYPE"
 fi
 
 if [ "$FSTYPE" = "cpio.gz" ]; then